RESUMO
Mixed fluids confined in porous solid hosts present challenges for the accurate characterization of individual-component behavior. NMR diffusometry with chemical resolution is used to identify unexpected loading- and composition-dependent anomalous diffusion in water/cyclohexane mixtures confined to solid nanoporous glass (NPG) hosts. Diffusion NMR results indicate that data obtained on pure-component liquids in confinement cannot be extrapolated to their nonideal liquid mixtures confined in the same solid host. Loading-dependent data must be obtained on each component in the confined mixture in order to determine which of the liquid components exhibits chemical affinity for the host and, conversely, which of the components exhibits anomalous diffusivity. Most notably, NMR diffusometry revealed that cyclohexane diffusivity varied by 2 orders of magnitude in a water-rich mixture depending on the total fluid loading in the NPG host, ranging from anomalously high diffusivities that significantly exceeded that for pure cyclohexane in NPG at low fluid loadings to kinetically trapped sequestration at high fluid loadings. NMR diffusometry indicates that nonideal solution behavior in fluids confined within nanoporous hosts may have practical implications for enhanced oil recovery methods. Specifically, kinetic trapping of hydrocarbons in water-flooding regimes can result from complex liquid-vapor equilibrium that is significantly perturbed from that which exists in bulk or microporous confinement.
RESUMO
Many recent innovative treatments are based on monoclonal antibodies (mAbs) and other protein therapies. Nevertheless, sustained subcutaneous, oral or pulmonary delivery of such therapeutics is limited by the poor stability, short half-life, and non-specific interactions between the antibody (Ab) and delivery vehicle. Protein stabilizers (osmolytes) such as carboxybetaine can prevent non-specific interactions within proteins. In this work, a biodegradable zwitterionic poly(carboxybetaine), pCB, based microgel covalently crosslinked with tetra(ethylene glycol) diacrylate (TTEGDA) was synthesized for Ab encapsulation. The resulting microgels were characterized via FTIR, diffusion NMR, small-angle neutron scattering (SANS), and cell culture studies. The microgels were found to contain up to 97.5% water content and showed excellent degradability that can be tuned with crosslinking density. Cell compatibility of the microgel was studied by assessing the toxicity and immunogenicity in vitro. Cells exposed to microgel showed complete viability and no pro-inflammatory secretion of interleukin 6 (IL6) or tumor necrosis factor-alpha (TNFα). Microgel was loaded with Immunoglobulin G (as a model Ab), using a post-fabrication loading technique, and Ab sustained release from microgels of varying crosslinking densities was studied. The released Abs (especially from the high crosslinked microgels) proved to be completely active and able to bind with Ab receptors. This study opens a new horizon for scientists to use such a platform for local delivery of Abs to the desired target with minimized non-specific interactions.
Assuntos
Microgéis , Géis , Hidrogéis , ProteínasRESUMO
Carbon nanotubes exhibit very unique properties in biphasic systems. Their interparticle attraction leads to reduced droplet coalescence rates and corresponding improvements in emulsion stability. Here we use covalent and noncovalent techniques to modify the hydrophilicity of multiwalled carbon nanotubes (MWCNTs) and study their resulting behavior at an oil-water interface. By using both paraffin wax/water and dodecane/water systems, the thickness of the layer of MWNTs at the interface and resulting emulsion stability are shown to vary significantly with the approach used to modify the MWNTs. Increased hydrophilicity of the MWNTs shifts the emulsions from water-in-oil to oil-in-water. The stability of the emulsion is found to correlate with the thickness of nanotubes populating the oil-water interface and relative strength of the carbon nanotube network. The addition of a surfactant decreases the thickness of nanotubes at the interface and enhances the overall interfacial area stabilized at the expense of increased droplet coalescence rates. To the best of our knowledge, this is the first time the interfacial thickness of modified carbon nanotubes has been quantified and correlated to emulsion stability.
Assuntos
Emulsões/química , Nanotubos de Carbono/química , Tensoativos/química , Alcanos/química , Interações Hidrofóbicas e Hidrofílicas , Água/químicaRESUMO
Traditionally, trays have been the mass-transfer device of choice in amine absorption units. However, the need to process large volumes of flue gas to capture CO2 and the resultant high costs of multiple trains of large trayed columns have prompted process licensors and vendors to investigate alternative mass-transfer devices. These alternatives include third-generation random packings and structured packings. Nevertheless, clear-cut guidelines for selection of packings for amine units are lacking. This paper provides well-defined guidelines and a consistent framework for the choice of mass-transfer devices for amine absorbers and regenerators. This work emphasizes the role played by the flow parameter, a measure of column liquid loading and pressure, in the type of packing selected. In addition, this paper demonstrates the significant economic advantage of packings over trays in terms of capital costs (CAPEX) and operating costs (OPEX).
Assuntos
Aminas/química , Dióxido de Carbono/isolamento & purificação , Modelos Químicos , Custos e Análise de Custo , Destilação , ReologiaRESUMO
This paper describes a proton nuclear magnetic resonance (NMR) technique, pulsed field gradient with diffusion editing (PFG-DE), to quantify drop size distributions of brine/crude oil emulsions. The drop size distributions obtained from this technique were compared to results from the traditional pulsed field gradient (PFG) technique. The PFG-DE technique provides both transverse relaxation (T2) and drop size distributions simultaneously. In addition, the PFG-DE technique does not assume a form of the drop size distribution. An algorithm for the selection of the optimal parameters to use in a PFG-DE measurement is described in this paper. The PFG-DE technique is shown to have the ability to resolve drop size distributions when the T2 distribution of the emulsified brine overlaps either the crude oil or the bulk brine T2 distribution. Finally, the PFG-DE technique is shown to have the ability to resolve a bimodal drop size distribution.
RESUMO
The hybrid gasification-syngas fermentation platform can produce more bioethanol utilizing all biomass components compared to the biochemical conversion technology. Syngas fermentation operates at mild temperatures and pressures and avoids using expensive pretreatment processes and enzymes. This study presents a new process simulation model developed with Aspen Plus® of a biorefinery based on a hybrid conversion technology for the production of anhydrous ethanol using 1200tons per day (wb) of switchgrass. The simulation model consists of three modules: gasification, fermentation, and product recovery. The results revealed a potential production of about 36.5million gallons of anhydrous ethanol per year. Sensitivity analyses were also performed to investigate the effects of gasification and fermentation parameters that are keys for the development of an efficient process in terms of energy conservation and ethanol production.
Assuntos
Biomassa , Fermentação , EtanolRESUMO
This life cycle assessment (LCA) evaluates the environmental impacts of an ethanol production system using eastern redcedar (Juniperus virginiana L.) as the feedstock. Aspen Plus® was used to model the acid bisulfite pretreatment, enzymatic hydrolysis, fermentation, and distillation steps. A cradle-to-gate LCA was conducted to evaluate the environmental impacts from cutting the trees to the production of anhydrous ethanol. The environmental impacts of the redcedar ethanol process were compared to those from the production of corn ethanol. Inventory data for the system were collected and used to calculate a life cycle impact assessment (LCIA) using the IMPACT 2002+ and BEES+ framework in SimaPro 8.0.0. Four impact categories were evaluated: land occupation, water use, greenhouse gas (GHG) emissions, and non-renewable energy use. Results indicate that acid bisulfite pretreatment contributed to 65% of GHG emissions, 81% of non-renewable energy use, and 77% of water use of the overall process.