Proposal regarding horizontal and vertical positioning of single implants placed in healed sites: Effect on cervical crown form and the need for bone grafting.

STATEMENT OF PROBLEM: When single implants are placed in healed sites, guidelines are lacking on the horizontal and vertical implant positions that optimize cervical crown form and the implant locations that would require bone grafting to develop the optimal crown form. PURPOSE: The purpose of this clinical study was to evaluate the cervical contour of wax patterns formed on casts of single implants placed in healed sites and to determine which horizontal and vertical implant positions produced the best cervical crown form and which indicated the need for bone grafting. MATERIAL AND METHODS: Fifty-eight wax patterns were fabricated on casts where implants had been placed in healed sites without bone grafting. The wax patterns were subjectively assessed by 5 dental faculty members and 5 graduate students as having good, fair, or poor cervical crown form. Horizontal measurements were made between the facial surface of the implant and a round metal wire connecting the gingival zeniths of the adjacent teeth. Vertical measurements were also made between the wire and implant platform. The subjective assessments along with the horizontal and vertical implant position measurements were used to propose guidelines for optimal implant placement in healed sites. RESULTS: Horizontal distances of 2.0 to 3.0 mm produced good cervical crown contours, with distances >3.0 mm and <2.0 mm resulting in fair or poor assessments. Vertical distances of 3.0 to 4.0 mm were judged to have good cervical crown contour, whereas depths of 1.0 mm or less were assessed as poor. CONCLUSIONS: Based on the subjective assessment of wax patterns formed on casts of single implants placed in healed sites, a guideline of 2.0 to 3.0 mm is proposed for the horizontal distance between a line connecting the adjacent gingival zeniths and the facial surface of the implant. A vertical distance guideline of 3.0 to 4.0 mm is proposed between the adjacent gingival zeniths and the implant platform.

Effects of cyclic loading on loss of abutment screw torque of angled screw channel single implant crowns on narrow diameter implants.

STATEMENT OF PROBLEM: Screw access channels that emerge on the facial aspect of anterior screw-retained implant crowns can compromise esthetics. Recently, angled screw channels (ASCs) have been developed that can alter screw access channel angulations to improve esthetics. While ASCs can be used on narrow-diameter implants, information is limited on the loss of abutment screw torque on narrow-diameter implants with ASCs. PURPOSE: The purpose of this in vitro study was to compare the loss of abutment screw torque after thermocycling and the cyclic loading of ASCs from 3 different companies connected to narrow-diameter implants. MATERIAL AND METHODS: A total of 40 narrow-diameter implants (NobelReplace Conical Connection 3.5×11.5 mm) were mounted individually in acrylic resin blocks and divided equally into 4 groups. The first group, NB-0 (Control), consisted of screw-retained zirconia crowns fabricated on ASCs at 0-degree angulation (n=10). The other 3 groups consisted of a total of 30 screw-retained zirconia crowns fabricated on ASCs at 20-degree angulation: NB-20 (Angulated Screw Channel Solutions), ATL-20 (Atlantis Custom Base Solution with angulated screw access), and DA-20 (Dynamic TiBase). Each crown was secured on the mounted implant with its corresponding titanium base insert and screw and then tightened to the manufacturer's recommended torque with a digital torque gauge. The initial reverse torque value (RTVI) was obtained and recorded at baseline. Subsequently, a new set of screws were tightened to recommended values, and each specimen underwent thermocycling and then cyclic loading at 0 to 100 N at 10 Hz for 1 million cycles to simulate 1year of functional loading. After cyclic loading, the final reverse torque values (RTVF) were recorded and compared with the RTVI to evaluate the percentage torque loss (PTLF). Statistical analysis was performed using the Kruskal-Wallis analysis, Rank base analysis of covariance (ANCOVA), and the Tukey HSD post hoc comparisons (α=.05). RESULTS: Significant differences were found for the PTLF among all groups after cyclic loading (P<.001). The PTLF in ATL-20 (51.4%) was significantly higher than in NB-0 (22.2%) (P<.001) and NB-20 (29.2%) (P=.010). No significant difference was found in the PTLF among other groups (P>.05). CONCLUSIONS: The abutment screw torque loss after cyclic loading of the ASCs on narrow diameter implants among the 4 groups did not perform comparably. The largest percentage torque loss was recorded for the ATL-20 group. The NB-20 group demonstrated the lowest percentage torque loss. DA-20 showed percentage torque loss less than ATL-20; however, its RTVF was the lowest.

Esthetic abutment design for angulated screw channels: A technical report.

Angulated screw channel system abutments (ASCs) have recently been introduced to address the problem with visible screw access that may compromise esthetics. ASCs allow the screw access to be modified up to 25 degrees relative to the implant axis. However, a widened channel, which may cause thinning of the facial ceramic, is needed at the implant screw head to allow for proper engagement of the screwdriver. This technical report introduces a custom titanium insert design, the Satoshi Sakamoto (SS) abutment. The SS abutment consists of a custom titanium metal insert and zirconia coping in which the access hole is located in an esthetic position with an ASC system. The SS abutment results in a crown with more normal crown dimensions that also provides more space for the soft tissues. This SS abutment design allows clinicians to obtain screw-retained restorations with optimal esthetics and mechanical strength.

A 3D-printed guide for lateral approach sinus grafting: A dental technique.

Lateral approach sinus grafting has become a routine and predictable surgical method of augmenting the pneumatized sinus for implant placement. Outlining the lateral window access can be a challenging task for the clinician to envision and execute. Improper extension and access to the maxillary sinus can prevent proper placement of graft materials and lead to complications. The purpose of this report was to demonstrate a technique that will allow the precise planning of the lateral approach using radiographic information and 3-dimensional (3D) software to 3D-print a surgical guide.

Accuracy of cone beam computerized tomography and a three-dimensional stereolithographic model in identifying the anterior loop of the mental nerve: a study on cadavers.

The objective of this ex vivo cadaver study was to determine the accuracy of cone beam computerized tomography (CBCT) and a 3-dimensional stereolithographic (STL) model in identifying and measuring the anterior loop length (ANLL) of the mental nerve. A total of 12 cadavers (24 mental nerve plexus) were used for this study. Standardized CBCT scans of each mandible were obtained both with and without radiographic contrast tracer injected into the mental nerve plexus, and STL models of the two acquired CBCT images were made. The ANLL were measured using CBCT, STL model, and anatomy. The measurements obtained from the CBCT images and STL models were then analyzed and compared with the direct anatomic measurements. A paired sample t test was used, and P values less than .05 were considered statistically significant. The mean difference between CBCT and anatomic measurement was 0.04 mm and was not statistically significant (P = .332), whereas the mean difference between STL models and anatomic measurement was 0.4 mm and was statistically significant (P = .042). There was also a statistical significant difference between CBCT and the STL model (P = .048) with the mean difference of 0.35 mm. Therefore, CBCT is an accurate and reliable method in determining and measuring the ANLL but the STL model over- or underestimated the ANLL by as much as 1.51 mm and 1.83 mm, respectively.

The incidence of maxillary sinus membrane perforation during endoscopically assessed crestal sinus floor elevation: a pilot study.

Transcrestal sinus membrane elevation is a surgical procedure performed to increase the bone volume in the maxillary sinus cavity. Because of visual limitations, the potential for maxillary sinus membrane perforations may be greater than with the lateral approach technique. The aim of this study was to macroscopically investigate ex vivo the occurrence of sinus membrane perforation during surgery using 3 transcrestal sinus floor elevation methods. Twenty fresh human cadaver heads, with 40 intact sinuses, were used for simultaneous sinus membrane elevation, placement of graft material, and dental implants. Real-time sinus endoscopy, periapical digital radiographs, and cone-beam computerized tomography (CBCT) images were subsequently used to evaluate the outcome of each surgical procedure. Perforation rates for each of the 3 techniques were then compared using a significance level of P < .05. No statistically significant differences in the perforation rate (P = .79) were found among the 3 surgical techniques. Although the sinus endoscope noted a higher frequency of perforations at the time of implant placement as compared with instrumentation or graft insertion, the difference was not statistically significant (P = .04). The CBCT readings were judged to be more accurate for identifying evidence of sinus perforations than the periapical radiographs when compared with the direct visualization with the endoscope. This pilot study demonstrated that a sinus membrane perforation can occur at any time during the sinus lift procedure, independent of the surgical method used.

Lateral and crestal bone planing antrostomy: a simplified surgical procedure to reduce the incidence of membrane perforation during maxillary sinus augmentation procedures.

This clinical report presents a simplified surgical procedure for accessing the maxillary sinus antrum via lateral and crestal approaches, which reduces the potential for sinus membrane perforation and subsequent complications when graft materials and dental implants are placed into the sinus. Due to visual limitations, perforations and associated complications can jeopardize the success rate of the graft and the implants. While there is a lack of clinical data, clinical observations suggest that the procedure, described by the authors as lateral/crestal bone planing antrostomy, can reduce the possibility of perforation of the maxillary sinus membrane during the lateral and crestal approaches to the grafting of the maxillary sinus floor. The technique involves the use of specially designed rotary instruments that plane away the bone in thinner layers, with less chance of excess bone removal and membrane perforation.

Assessment of the Anterior Loop of the Mental Nerve Using Cone Beam Computerized Tomography Scan.

The purpose of this study is to use cone-beam computerized tomography (CBCT) scans with oblique-transverse reconstruction modality to measure and compare the anterior loop length (AnLL) of the mental nerve between gender and age groups and to compare the difference between the right and left sides. Sixty-one female and 61 male CBCT scans were randomly selected for each age group: 21-40, 41-60, and 61-80 years. Both right- and left-side AnLLs were measured in each subject using i-CATVision software to measure AnLLs on the oblique transverse plane using multiplanar reconstruction. The anterior loop was identified in 85.2% of cases, with the mean AnLL of the 366 subjects (732 hemimandibles) being 1.46 ± 1.25 mm with no statistically significant difference between right and left sides or between different gender groups. However, the mean AnLL in the 21-40 year group (1.89 ± 1.35 mm) was larger than the AnLL in the 41-60 year group (1.35 ± 1.19 mm) and the 61-80 year group (1.13 ± 1.08 mm). In conclusion, when placing implants in close proximity to mental foramina, caution is recommended to avoid injury to the inferior alveolar nerve. No fixed distance anteriorly from the mental foramen should be considered safe. Using CBCT scans with the oblique-transverse method to accurately identify and measure the AnLL is of utmost importance in avoiding and protecting its integrity.

Tooth retention through endodontic microsurgery or tooth replacement using single implants: a systematic review of treatment outcomes.

INTRODUCTION: Clinicians are regularly confronted with difficult choices. Should a tooth that has not healed through nonsurgical root canal treatment be treated through endodontic microsurgery or be replaced using a single implant? Acquiring complete, unbiased information to help clinicians and their patients make these choices requires a systematic review of the literature on treatment outcomes. The purpose of this systematic review was to compare the outcomes of tooth retention through endodontic microsurgery to tooth replacement using an implant supported single crown. METHODS: Searches performed in PubMed, Cochrane Library, Web of Science, and EMBASE databases were enriched by citation mining. Inclusion criteria were defined. Sentinel articles were identified and included in the final selection of studies. Weighted survival and success rates for single implants and endodontic microsurgery were calculated. RESULTS: The quality of the articles reporting on single implants and endodontic microsurgery was moderate. Data for single implants were much more plentiful than for endodontic microsurgery, but the endodontic microsurgery studies had a slightly higher quality rating. Single implants and endodontic microsurgery were not directly compared in the literature. Outcomes criteria were often unclear. At 4-6 years, single implants had higher survival rates than teeth treated with endodontic microsurgery. Qualitatively different success criteria precluded valid comparison of success rates. CONCLUSIONS: Survival rates for single implants and endodontic microsurgery were both high (higher for single implants). Appraisal was limited by a lack of direct treatment comparisons. Long-term studies with a broad range of carefully defined outcomes criteria are needed.