RESUMO
A self-decoupled technique is described that enables the radiating elements in the antenna array to be densely packed for multiple-input multiple-output (MIMO) wireless communications systems. High isolation between the adjacent antenna elements is obtained by fixing the radiating elements in an orthogonal configuration with respects to each other. Current from the adjacent ports cancels their impact which results in low mutual coupling. The additional benefit of this configuration is realizing a densely packed array. The ground plane of each radiating element on the array board itself are isolated to mitigate surface wave propagations to suppress mutual coupling between the antenna elements. The radiating elements are based on a modified edge-fed circular patch antenna that includes a curved slot line and open-circuited stub to widen the array's impedance bandwidth with no impact on the antenna's footprint size. The proposed technique was verified with the design of an antenna array of matrix size 4 × 4 centered at 3.5 GHz. The array had a measured impedance bandwidth of 4 GHz from 1.5 GHz to 5.5 GHz, which corresponds to a fractional bandwidth of 114%, peak gain of 3 dBi and radiation efficiency of 84%. Its average diversity gain and envelope correlation coefficient (ECC) over its operating band are 9.6 dB and <0.016, respectively. The minimum isolation achieved between the radiating elements is better than 15 dB. The dimensions of the array are 0.4 × 0.4 × 0.039λ_g^3. The proposed array has characteristics suitable for sub-6 GHz wireless communication systems
Assuntos
Bandagens , Reprodução , Impedância Elétrica , ComunicaçãoRESUMO
In vehicular ad hoc networks (VANETs), content pre-caching is a significant technology that improves network performance and lowers network response delay. VANET faces network congestion when multiple requests for the same content are generated. Location-based dependency requirements make the system more congested. Content pre-caching is an existing challenge in VANET; pre-caching involves the content's early delivery to the requested vehicles to avoid network delays and control network congestion. Early content prediction saves vehicles from accidents and road disasters in urban environments. Periodic data dissemination without considering the state of the road and surrounding vehicles are considered in this research. The content available at a specified time poses considerable challenges in VANET for content delivery. To address these challenges, we propose a machine learning-based, zonal/context-aware-equipped content pre-caching strategy in this research. The proposed model improves content placement and content management in the pre-caching mode for VANET. Content caching is achieved through machine learning, which significantly improves content prediction by pre-caching the content early to the desired vehicles that are part of the zone. In this paper, three algorithms are presented, the first is zone selection using the customized algorithm, the second is the content dissemination algorithm, and the third is the content pre-caching decision algorithm using supervised machine learning that improves the early content prediction accuracy by 99.6%. The cache hit ratio for the proposed technique improves by 13% from the previous techniques. The prediction accuracy of the proposed technique is compared with CCMP, MLCP, and PCZS+PCNS on the number of vehicles from 10 to 150, with an improved average of 16%. Finally, the average delay reduces over time compared with the state-of-the-art techniques of RPSS, MLCP, CCMP, and PCZS+PCNS. Finally, the average delay shows that the proposed method effectively reduces the delay when the number of nodes increases. The proposed solution improves the content delivery request while comparing it with existing techniques. The results show improved pre-caching in VANET to avoid network congestion.
Assuntos
Desastres , Inteligência , Aprendizado de Máquina , Algoritmos , ConscientizaçãoRESUMO
Internet of Things (IoT) devices usage is increasing exponentially with the spread of the internet. With the increasing capacity of data on IoT devices, these devices are becoming venerable to malware attacks; therefore, malware detection becomes an important issue in IoT devices. An effective, reliable, and time-efficient mechanism is required for the identification of sophisticated malware. Researchers have proposed multiple methods for malware detection in recent years, however, accurate detection remains a challenge. We propose a deep learning-based ensemble classification method for the detection of malware in IoT devices. It uses a three steps approach; in the first step, data is preprocessed using scaling, normalization, and de-noising, whereas in the second step, features are selected and one hot encoding is applied followed by the ensemble classifier based on CNN and LSTM outputs for detection of malware. We have compared results with the state-of-the-art methods and our proposed method outperforms the existing methods on standard datasets with an average accuracy of 99.5%.
Assuntos
Aprendizado Profundo , Internet das Coisas , Humanos , Internet , PesquisadoresRESUMO
Coronary heart disease is one of the major causes of deaths around the globe. Predicating a heart disease is one of the most challenging tasks in the field of clinical data analysis. Machine learning (ML) is useful in diagnostic assistance in terms of decision making and prediction on the basis of the data produced by healthcare sector globally. We have also perceived ML techniques employed in the medical field of disease prediction. In this regard, numerous research studies have been shown on heart disease prediction using an ML classifier. In this paper, we used eleven ML classifiers to identify key features, which improved the predictability of heart disease. To introduce the prediction model, various feature combinations and well-known classification algorithms were used. We achieved 95% accuracy with gradient boosted trees and multilayer perceptron in the heart disease prediction model. The Random Forest gives a better performance level in heart disease prediction, with an accuracy level of 96%.
Assuntos
Doença das Coronárias , Cardiopatias , Algoritmos , Doença das Coronárias/diagnóstico , Humanos , Aprendizado de Máquina , Redes Neurais de Computação , Máquina de Vetores de SuporteRESUMO
Due to the rapid growth in IT technology, digital data have increased availability, creating novel security threats that need immediate attention. An intrusion detection system (IDS) is the most promising solution for preventing malicious intrusions and tracing suspicious network behavioral patterns. Machine learning (ML) methods are widely used in IDS. Due to a limited training dataset, an ML-based IDS generates a higher false detection ratio and encounters data imbalance issues. To deal with the data-imbalance issue, this research develops an efficient hybrid network-based IDS model (HNIDS), which is utilized using the enhanced genetic algorithm and particle swarm optimization(EGA-PSO) and improved random forest (IRF) methods. In the initial phase, the proposed HNIDS utilizes hybrid EGA-PSO methods to enhance the minor data samples and thus produce a balanced data set to learn the sample attributes of small samples more accurately. In the proposed HNIDS, a PSO method improves the vector. GA is enhanced by adding a multi-objective function, which selects the best features and achieves improved fitness outcomes to explore the essential features and helps minimize dimensions, enhance the true positive rate (TPR), and lower the false positive rate (FPR). In the next phase, an IRF eliminates the less significant attributes, incorporates a list of decision trees across each iterative process, supervises the classifier's performance, and prevents overfitting issues. The performance of the proposed method and existing ML methods are tested using the benchmark datasets NSL-KDD. The experimental findings demonstrated that the proposed HNIDS method achieves an accuracy of 98.979% on BCC and 88.149% on MCC for the NSL-KDD dataset, which is far better than the other ML methods i.e., SVM, RF, LR, NB, LDA, and CART.
Assuntos
Algoritmos , Máquina de Vetores de Suporte , Aprendizado de MáquinaRESUMO
Traditional advertising techniques seek to govern the consumer's opinion toward a product, which may not reflect their actual behavior at the time of purchase. It is probable that advertisers misjudge consumer behavior because predicted opinions do not always correspond to consumers' actual purchase behaviors. Neuromarketing is the new paradigm of understanding customer buyer behavior and decision making, as well as the prediction of their gestures for product utilization through an unconscious process. Existing methods do not focus on effective preprocessing and classification techniques of electroencephalogram (EEG) signals, so in this study, an effective method for preprocessing and classification of EEG signals is proposed. The proposed method involves effective preprocessing of EEG signals by removing noise and a synthetic minority oversampling technique (SMOTE) to deal with the class imbalance problem. The dataset employed in this study is a publicly available neuromarketing dataset. Automated features were extracted by using a long short-term memory network (LSTM) and then concatenated with handcrafted features like power spectral density (PSD) and discrete wavelet transform (DWT) to create a complete feature set. The classification was done by using the proposed hybrid classifier that optimizes the weights of two machine learning classifiers and one deep learning classifier and classifies the data between like and dislike. The machine learning classifiers include the support vector machine (SVM), random forest (RF), and deep learning classifier (DNN). The proposed hybrid model outperforms other classifiers like RF, SVM, and DNN and achieves an accuracy of 96.89%. In the proposed method, accuracy, sensitivity, specificity, precision, and F1 score were computed to evaluate and compare the proposed method with recent state-of-the-art methods.
Assuntos
Eletroencefalografia , Emoções , Eletroencefalografia/métodos , Análise de Ondaletas , Algoritmo Florestas Aleatórias , Máquina de Vetores de SuporteRESUMO
The security of information is necessary for the success of any system. So, there is a need to have a robust mechanism to ensure the verification of any person before allowing him to access the stored data. So, for purposes of increasing the security level and privacy of users against attacks, cancelable biometrics can be utilized. The principal objective of cancelable biometrics is to generate new distorted biometric templates to be stored in biometric databases instead of the original ones. This paper presents effective methods based on different discrete transforms, such as Discrete Fourier Transform (DFT), Fractional Fourier Transform (FrFT), Discrete Cosine Transform (DCT), and Discrete Wavelet Transform (DWT), in addition to matrix rotation to generate cancelable biometric templates, in order to meet revocability and prevent the restoration of the original templates from the generated cancelable ones. Rotated versions of the images are generated in either spatial or transform domains and added together to eliminate the ability to recover the original biometric templates. The cancelability performance is evaluated and tested through extensive simulation results for all proposed methods on a different face and fingerprint datasets. Low Equal Error Rate (EER) values with high AROC values reflect the efficiency of the proposed methods, especially those dependent on DCT and DFrFT. Moreover, a comparative study is performed to evaluate the proposed method with all transformations to select the best one from the security perspective. Furthermore, a comparative analysis is carried out to test the performance of the proposed schemes with the existing schemes. The obtained outcomes reveal the efficiency of the proposed cancelable biometric schemes by introducing an average AROC of 0.998, EER of 0.0023, FAR of 0.008, and FRR of 0.003.
RESUMO
Most modern security systems depend on biometrics. Unfortunately, these systems have suffered from hacking trials. If the biometric databases have been hacked and stolen, the biometrics saved in these databases will be lost forever. Thus, there is a desperate need to develop new cancelable biometric systems. The basic concept of cancelable biometrics is to use another version of the original biometric template created through a one-way transform or an encryption scheme to keep the original biometrics safe and away from utilization in the system. In this paper, the optical double random phase encoding (DRPE) algorithm is utilized for cancelable face and iris recognition systems. In the proposed cancelable face recognition scheme, the scale invariant feature transform is used for feature extraction from the face images. The extracted feature map is encrypted with the DRPE algorithm. The proposed cancelable iris recognition system depends on the utilization of two iris images for the same person and features are extracted from both images. The features extracted from one of the iris images are encrypted with the DRPE algorithm, provided that the second phase mask used in the DRPE is generated from the other iris image features. This trend guarantees some sort of feature fusion between the two iris images into a single cancelable iris code and increases user privacy. Simulation results show good performance of the two proposed cancelable biometric schemes even in the presence of noise, especially with the proposed cancelable face recognition scheme.
Assuntos
Identificação Biométrica/métodos , Reconhecimento Facial , Iris/anatomia & histologia , Algoritmos , Inteligência Artificial , Humanos , Reconhecimento Automatizado de Padrão/métodosRESUMO
Computerized tomography (CT) is of great significance for the localization and diagnosis of liver cancer. Many scholars have recently applied deep learning methods to segment CT images of liver and liver tumors. Unlike natural images, medical image segmentation is usually more challenging due to its nature. Aiming at the problem of blurry boundaries and complex gradients of liver tumor images, a deep supervision network based on the combination of high-efficiency channel attention and Res-UNet++ (ECA residual UNet++) is proposed for liver CT image segmentation, enabling fully automated end-to-end segmentation of the network. In this paper, the UNet++ structure is selected as the baseline. The residual block feature encoder based on context awareness enhances the feature extraction ability and solves the problem of deep network degradation. The introduction of an efficient attention module combines the depth of the feature map with spatial information to alleviate the uneven sample distribution impact; Use DiceLoss to replace the cross-entropy loss function to optimize network parameters. The liver and liver tumor segmentation accuracy on the LITS dataset was 95.8% and 89.3%, respectively. The results show that compared with other algorithms, the method proposed in this paper achieves a good segmentation performance, which has specific reference significance for computer-assisted diagnosis and treatment to attain fine segmentation of liver and liver tumors.
Assuntos
Neoplasias Hepáticas , Humanos , Neoplasias Hepáticas/diagnóstico por imagem , Algoritmos , Diagnóstico por Computador , Tomografia Computadorizada por Raios X , Processamento de Imagem Assistida por ComputadorRESUMO
Human health is at risk from pulmonary hypertension (PH), characterized by decreased pulmonary vascular resistance and constriction of the pulmonary vessels, resulting in right heart failure and dysfunction. Thus, preventing PH and monitoring its progression before treating it is vital. Wogonin, derived from the leaves of Scutellaria baicalensis Georgi, exhibits remarkable pharmacological activity. In this study, we examined the effectiveness of wogonin in mitigating the progression of PH in mice using right heart catheterization and hematoxylin-eosin (HE) staining. As an alternative to minimize the possibility of harming small animals, we present a scientifically effective feature selection method (BSCDWOA-KELM) that will allow us to develop a novel simpler noninvasive prediction method for wogonin in treating PH. In this method, we use the proposed enhanced whale optimizer (SCDWOA) in conjunction with the kernel extreme learning machine (KELM). Initially, we let SCDWOA perform global optimization experiments on the IEEE CEC2014 benchmark function set to verify its core advantages. Lastly, 12 public and PH datasets are examined for feature selection experiments using BSCDWOA-KELM. As shown in the experimental results for global optimization, the proposed SCDWOA has better convergence performance. Meanwhile, the proposed binary SCDWOA (BSCDWOA) significantly improves the ability of KELM to classify data. By utilizing the BSCDWOA-KELM, key indicators such as the Red blood cell (RBC), the Haemoglobin (HGB), the Lymphocyte percentage (LYM%), the Hematocrit (HCT), and the Red blood cell distribution width-size distribution (RDW-SD) can be efficiently screened in the Pulmonary hypertension dataset, and one of its most essential points is its accuracy of greater than 0.98. Consequently, the BSCDWOA-KELM introduced in this study can be used to predict wogonin therapy for treating pulmonary hypertension in a simple and noninvasive manner.
Assuntos
Hipertensão Pulmonar , Humanos , Animais , Camundongos , Hipertensão Pulmonar/tratamento farmacológico , Hematócrito , Benchmarking , Aprendizado de MáquinaRESUMO
Transform-domain audio watermarking systems are more robust than time-domain systems. However, the main weakness of these systems is their high computational cost, especially for long-duration audio signals. Therefore, they are not desirable for real-time security applications where speed is a critical factor. In this paper, we propose a fast watermarking system for audio signals operating in the hybrid transform domain formed by the fractional Charlier transform (FrCT) and the dual-tree complex wavelet transform (DTCWT). The central idea of the proposed algorithm is to parallelize the intensive and repetitive steps in the audio watermarking system and then implement them simultaneously on the available physical cores on an embedded systems cluster. In order to have a low power consumption and a low-cost cluster with a large number of physical cores, four Raspberry Pis 4B are used where the communication between them is ensured using the Message Passing Interface (MPI). The adopted Raspberry Pi cluster is also characterized by its portability and mobility, which are required in watermarking-based smart city applications. In addition to its resistance to any possible manipulation (intentional or unintentional), high payload capacity, and high imperceptibility, the proposed parallel system presents a temporal improvement of about 70%, 80%, and 90% using 4, 8, and 16 physical cores of the adopted cluster, respectively.
RESUMO
Brain stroke is a major cause of global death and it necessitates earlier identification process to reduce the mortality rate. Magnetic resonance imaging (MRI) techniques is a commonly available imaging modality used to diagnose brain stroke. Presently, machine learning (ML) and deep learning (DL) models can be extremely utilized for disease detection and classification processes. Amongst the available approaches, the convolutional neural network (CNN) models have been widely used for computer vision and image processing issues such as ImageNet, facial detection, and digit classification. In this article, a novel computer aided diagnosis (CAD) based brain stroke detection and classification (CAD-BSDC) model has been developed for MRI images. The proposed CAD-BSDC technique aims in classifying the provided MR brain image as normal or abnormal. The CAD-BSDC technique involves different subprocesses such as preprocessing, feature extraction, and classification. Firstly, the input image undergoes preprocessing using adaptive thresholding (AT) technique for improving the image quality. Followed by, an ensemble of feature extractors such as MobileNet, CapsuleNet, and EfficientNet models are used. Besides, the hyperparameter tuning of the deep learning models takes place using the improved dragonfly optimization (IDFO) algorithm. Moreover, satin bowerbird optimization (SBO) based stacked autoencoder (SAE) is used for the classification of brain stroke. The design of optimal SAE using the SBO algorithm shows the novelty of the work. The performance of the presented technique was validated utilizing benchmark dataset which includes T2-weighted MR brain image collected from the axial axis with size of 256 × 256. The simulation outcomes indicated the promising efficiency of the proposed CAD-BSDC technique over the latest state of art approaches in terms of various performance measures.
Assuntos
Aprendizado Profundo , Acidente Vascular Cerebral , Humanos , Imageamento por Ressonância Magnética/métodos , Redes Neurais de Computação , Encéfalo/diagnóstico por imagem , Acidente Vascular Cerebral/diagnóstico por imagemRESUMO
Emotion recognition is one of the trending research fields. It is involved in several applications. Its most interesting applications include robotic vision and interactive robotic communication. Human emotions can be detected using both speech and visual modalities. Facial expressions can be considered as ideal means for detecting the persons' emotions. This paper presents a real-time approach for implementing emotion detection and deploying it in the robotic vision applications. The proposed approach consists of four phases: preprocessing, key point generation, key point selection and angular encoding, and classification. The main idea is to generate key points using MediaPipe face mesh algorithm, which is based on real-time deep learning. In addition, the generated key points are encoded using a sequence of carefully designed mesh generator and angular encoding modules. Furthermore, feature decomposition is performed using Principal Component Analysis (PCA). This phase is deployed to enhance the accuracy of emotion detection. Finally, the decomposed features are enrolled into a Machine Learning (ML) technique that depends on a Support Vector Machine (SVM), k-Nearest Neighbor (KNN), Naïve Bayes (NB), Logistic Regression (LR), or Random Forest (RF) classifier. Moreover, we deploy a Multilayer Perceptron (MLP) as an efficient deep neural network technique. The presented techniques are evaluated on different datasets with different evaluation metrics. The simulation results reveal that they achieve a superior performance with a human emotion detection accuracy of 97%, which ensures superiority among the efforts in this field.
Assuntos
Aprendizado de Máquina , Máquina de Vetores de Suporte , Algoritmos , Teorema de Bayes , Emoções , Humanos , FalaRESUMO
The discovery of a new form of corona-viruses in December 2019, SARS-CoV-2, commonly named COVID-19, has reshaped the world. With health and economic issues at stake, scientists have been focusing on understanding the dynamics of the disease, in order to provide the governments with the best policies and strategies allowing them to reduce the span of the virus. The world has been waiting for the vaccine for more than one year. The World Health Organization (WHO) is advertising the vaccine as a safe and effective measure to fight off the virus. Saudi Arabia was the fourth country in the world to start to vaccinate its population. Even with the new simplified COVID-19 rules, the third dose is still mandatory. COVID-19 vaccines have raised many questions regarding in its efficiency and its role to reduce the number of infections. In this work, we try to answer these question and propose a new mathematical model with five compartments, including susceptible, vaccinated, infectious, asymptotic and recovered individuals. We provide theoretical results regarding the effective reproduction number, the stability of endemic equilibrium and disease free equilibrium. We provide numerical analysis of the model based on the Saudi case. Our developed model shows that the vaccine reduces the transmission rate and provides an explanation to the rise in the number of new infections immediately after the start of the vaccination campaign in Saudi Arabia.
RESUMO
The abnormal growth of the skin cells is known as skin cancer. It is one of the main problems in the dermatology area. Skin lesions or malignancies have been a source of worry for many individuals in recent years. Irrespective of the skin tone, there exist three major classes of skin lesions, i.e., basal cell carcinoma, squamous cell carcinoma, and melanoma. The early diagnosis of these lesions is equally important for human life. In the proposed work, a secure IoMT-Assisted framework is introduced that can help the patients to do the initial screening of skin lesions remotely. The initially proposed approach uses an IoMT-based data collection device which is accessible by patients to capture skin lesions images. Next, the captured skin sample is encrypted and sent to the collected image toward cloud storage. Later, the received sample image is classified into appropriate class labels using an ensemble classifier. In the proposed framework, four CNN models were ensemble i.e., VGG-16, DenseNet-201, Inception-V3, and Efficient-B7. The framework has experimented with the "HAM10000" dataset having 7 different kinds of skin lesions data. Although DenseNet-201 performed well, the ensemble model provides the highest accuracy with 87.22 percent as well as its test loss/error is lower than others with 0.4131. Moreover, the ensemble model's classification ability is much higher with an AUC score of 0.9745. Moreover, A recommendation team has been assigned to assess the sample of the patient as well as suggest the patient according to classified results by the CAD.
Assuntos
Dermatologia , Neoplasias Cutâneas , Coleta de Dados , Atenção à Saúde , Dermatologia/métodos , Dermoscopia/métodos , Humanos , Neoplasias Cutâneas/diagnóstico , Neoplasias Cutâneas/patologiaRESUMO
In this article, very compact 2 × 2 and 4 × 4 MIMO (Multiple-Input and Multiple output) antennas are designed with the help of Characteristics Mode Analysis to enhance isolation between the elements for UWB applications. The proposed antennas are designed with Characteristic Mode Analysis (CMA) to gain physical insight and also to analyze the dominant mode. To improve isolation and minimize the mutual coupling between radiating elements, elliptical shaped stubs are used. The dimensions of the 2 × 2 and 4 × 4 MIMO antennas are 0.29λ0 × 0.21λ0 (28 × 20 mm2) and 0.29λ0 × 0.42λ0 (28 × 40 mm2), respectively. These antennas cover the (3.1 GHz-13.75 GHz) UWB frequency band and maintain remarkable isolation of more than 25 dB for both 2 × 2 and 4 × 4 antennas. The impedance bandwidth of the proposed 4 × 4 MIMO antenna is 126.40% from 3.1 GHz to 13.75 GHz, including X-Band and ITU bands. The proposed 4 × 4 antenna has good radiation efficiency, with a value of more than 92.5%. The envelope correlation coefficient (ECC), diversity gain (DG), mean effective gain (MEG), and channel capacity loss (CCL) matrices of the 4 × 4 antenna are simulated and tested. The corresponding values are 0.0045, 9.982, -3.1 dB, and 0.39, respectively. The simulated results are validated with measured results and favorable agreements for both the 2 × 2 and 4 × 4 UWB-MIMO antennas.
RESUMO
Cervical cancer has become the third most common form of cancer in the in-universe, after the widespread breast cancer. Human papillomavirus risk of infection is linked to the majority of cancer cases. Preventive care, the most expensive way of fighting cancer, can protect about 37% of cancer cases. The Pap smear examination is a standard screening procedure for the initial screening of cervical cancer. However, this manual test procedure generates many false-positive outcomes due to individual errors. Various researchers have extensively investigated machine learning (ML) methods for classifying cervical Pap cells to enhance manual testing. The random forest method is the most popular method for anticipating features from a high-dimensional cancer image dataset. However, the random forest method can get too slow and inefficient for real-time forecasts when too many decision trees are used. This research proposed an efficient feature selection and prediction model for cervical cancer datasets using Boruta analysis and SVM method to deal with this challenge. A Boruta analysis method is used. It is improved from of random forest method and mainly discovers feature subsets from the data source that are significant to assigned classification activity. The proposed model's primary aim is to determine the importance of cervical cancer screening factors for classifying high-risk patients depending on the findings. This research work analyses cervical cancer and various risk factors to help detect cervical cancer. The proposed model Boruta with SVM and various popular ML models are implemented using Python and various performance measuring parameters, i.e., accuracy, precision, F1-Score, and recall. However, the proposed Boruta analysis with SVM performs outstanding over existing methods.
Assuntos
Neoplasias do Colo do Útero , Detecção Precoce de Câncer , Feminino , Humanos , Aprendizado de Máquina , Fatores de Risco , Neoplasias do Colo do Útero/diagnóstico , Esfregaço VaginalRESUMO
Deep learning is one of the most promising machine learning techniques that revolutionalized the artificial intelligence field. The known traditional and convolutional neural networks (CNNs) have been utilized in medical pattern recognition applications that depend on deep learning concepts. This is attributed to the importance of anomaly detection (AD) in automatic diagnosis systems. In this paper, the AD is performed on medical electroencephalography (EEG) signal spectrograms and medical corneal images for Internet of medical things (IoMT) systems. Deep learning based on the CNN models is employed for this task with training and testing phases. Each input image passes through a series of convolution layers with different kernel filters. For the classification task, pooling and fully-connected layers are utilized. Computer simulation experiments reveal the success and superiority of the proposed models for automated medical diagnosis in IoMT systems.