Is Silver Addition to Scaffolds Based on Polycaprolactone Blended with Calcium Phosphates Able to Inhibit Candida albicans and Candida auris Adhesion and Biofilm Formation?

Candida spp. periprosthetic joint infections are rare but difficult-to-treat events, with a slow onset, unspecific symptoms or signs, and a significant relapse risk. Treatment with antifungals meets with little success, whereas prosthesis removal improves the outcome. In fact, Candida spp. adhere to orthopedic devices and grow forming biofilms that contribute to the persistence of this infection and relapse, and there is insufficient evidence that the use of antifungals has additional benefits for anti-biofilm activity. To date, studies on the direct antifungal activity of silver against Candida spp. are still scanty. Additionally, polycaprolactone (PCL), either pure or blended with calcium phosphate, could be a good candidate for the design of 3D scaffolds as engineered bone graft substitutes. Thus, the present research aimed to assess the antifungal and anti-biofilm activity of PCL-based constructs by the addition of antimicrobials, for instance, silver, against C. albicans and C. auris. The appearance of an inhibition halo around silver-functionalized PCL scaffolds for both C. albicans and C. auris was revealed, and a significant decrease in both adherent and planktonic yeasts further demonstrated the release of Ag+ from the 3D constructs. Due to the combined antifungal, osteoproliferative, and biodegradable properties, PCL-based 3D scaffolds enriched with silver showed good potential for bone tissue engineering and offer a promising strategy as an ideal anti-adhesive and anti-biofilm tool for the reduction in prosthetic joints of infections caused by Candida spp. by using antimicrobial molecule-targeted delivery.

Dalbavancin Boosts the Ability of Neutrophils to Fight Methicillin-Resistant Staphylococcus aureus.

Polymorphonuclear leukocytes (PMNs) are the most important cell type involved in the early nonspecific host response to bacterial pathogens. Staphylococcus aureus has evolved mechanisms to evade immune responses that contribute to its persistence in PMNs, and acquired resistance to several antimicrobials. Additionally, methicillin-resistant S. aureus (MRSA) is one of the most common causes of acute bacterial skin and skin-structure infections (ABSSSIs). Dalbavancin (DBV), a lipoglycopeptide, is indicated for the treatment of ABSSSIs, and has a broad spectrum of action against most microorganisms. Here, we sought to determine the effect of DBV on the neutrophil killing of MRSA and its potential immunomodulating activity. Our results revealed that DBV boosts MRSA killing by acting on both bacteria and PMNs. DBV pre-treatment of PMNs did not change the respiratory burst or degranulation, while an increased trend in neutrophil extracellular traps-associated elastase and in the production of TNFα and CXCL8 was revealed. In parallel, DBV caused a delay in the apoptosis of MRSA-infected neutrophils. In conclusion, we demonstrated a cooperative effect between the antimicrobial properties of PMNs and DBV, thus owing to their immunomodulatory activity. In the choice of the treatment management of serious S. aureus infections, DBV should be considered as an outstanding option since it reinforces PMNs pathogen clearance capability by exerting its effect directly, not only on MRSA but also on neutrophils.

Design, Characterization, and Biological Activities of Erythromycin-Loaded Nanodroplets to Counteract Infected Chronic Wounds Due to Streptococcus pyogenes.

Streptococcus pyogenes causes a wide spectrum of diseases varying from mild to life threatening, despite antibiotic treatment. Nanoparticle application could facilitate the foreign pathogen fight by increasing the antimicrobial effectiveness and reducing their adverse effects. Here, we designed and produced erythromycin-loaded chitosan nanodroplets (Ery-NDs), both oxygen-free and oxygen-loaded. All ND formulations were characterized for physico-chemical parameters, drug release kinetics, and tested for biocompatibility with human keratinocytes and for their antibacterial properties or interactions with S. pyogenes. All tested NDs possessed spherical shape, small average diameter, and positive Z potential. A prolonged Ery release kinetic from Ery-NDs was demonstrated, as well as a favorable biocompatibility on human keratinocytes. Confocal microscopy images showed ND uptake and internalization by S. pyogenes starting from 3 h of incubation up to 24 h. According to cell counts, NDs displayed long-term antimicrobial efficacy against streptococci significantly counteracting their proliferation up to 24 h, thanks to the known chitosan antimicrobial properties. Intriguingly, Ery-NDs were generally more effective (104-103 log10 CFU/mL), than free-erythromycin (105 log10 CFU/mL), in the direct killing of streptococci, probably due to Ery-NDs adsorption by bacteria and prolonged release kinetics of erythromycin inside S. pyogenes cells. Based on these findings, NDs and proper Ery-NDs appear to be the most promising and skin-friendly approaches for the topical treatment of streptococcal skin infections allowing wound healing during hypoxia.

In Vitro Antifungal Activity of Selected Essential Oils against Drug-Resistant Clinical Aspergillus spp. Strains.

BACKGROUND: Treatment options for aspergillosis include amphotericin B (AMB) and azole compounds, such as itraconazole (ITZ). However, serious side effects related to these antifungal agents are increasingly evident, and resistance continues to increase. Currently, a new trend in drug discovery to overcome this problem is represented by natural products from plants, or their extracts. Particularly, there is a great interest in essential oils (EOs) recognized for their antimicrobial role towards bacteria, fungi and viruses. METHODS: In this study, we evaluated the antifungal activity of eleven commercial EOs-clove, eucalyptus, geranium, hybrid lavender, lavender, lemon, lemongrass, neroli, oregano, tea tree and red red thyme-in comparison with AMB and ITZ against Aspergillus flavus, A. fumigatus and A. niger clinical isolates. Antifungal activity was determined by broth microdilution method, agar diffusion technique, fungistatic and fungicidal activities and vapor contact assay. RESULTS: Gas chromatography-mass spectrometry analysis displayed two groups of distinct biosynthetical origin: monoterpenes dominated the chemical composition of the most oils. Only two aromatic compounds (eugenol 78.91% and eugenyl acetate 11.64%) have been identified as major components in clove EO. Lemongrass EO exhibits the strongest antimicrobial activity with a minimum inhibitory concentration of 0.56 mg/mL and a minimum fungicidal concentration of 2.25-4.5 mg/mL against Aspergillus spp. strains. Clove and geranium EOs were fairly effective in inhibiting Aspergillus spp. growth. CONCLUSIONS: These results demonstrate the antimicrobial potential of some EOs and support the research of new alternatives or complementary therapies based on EOs.

Evaluation of a diagnostic algorithm for rapid identification of Gram-negative species and detection of extended-spectrum ß-lactamase and carbapenemase directly from blood cultures.

OBJECTIVES: To evaluate a rapid diagnostic algorithm based on MALDI-TOF MS, lateral flow immunoassays (LFIAs) and molecular testing performed directly from positive blood cultures (BCs) for Gram-negative species identification and detection of CTX-M extended-spectrum ß-lactamases and main carbapenemases. METHODS: Non-duplicate BCs positive to Gram-negative bacteria at microscope examination were subjected to species identification by direct MALDI-TOF MS following recovery of bacterial pellet by Rapid MBT Sepsityper® kit. Subsequently, NG-Test® CARBA 5 and NG-Test® CTX-M MULTI LFIAs were performed according to identified microbial species. Eazyplex® SuperBug CRE molecular assay was performed in cases of NG-Test® CARBA 5 negative results in patients with documented carbapenemase-producers carriage. Results of rapid diagnostic workflow were compared with those obtained by conventional diagnostic routine. RESULTS: Overall, the direct MALDI-TOF MS protocol allowed reliable identification to the species level of 92.1% of the 2133 monomicrobial BCs. Rate of matched identification was significantly higher for Enterobacterales (97.3%) in comparison to non-fermenting Gram-negative species (80.2%), obligate anaerobic bacteria (42.1%) and fastidious Gram-negative species (41.5%). The overall sensitivity of NG-Test® CARBA 5 and NG-Test® CTX-M MULTI was 92.2% and 91.6%, respectively. Integration of Easyplex® SuperBug CRE allowed the detection of blaKPC mutants associated with ceftazidime/avibactam resistance, reaching 100% sensitivity in carbapenemase detection. Both LFIAs and molecular testing showed no false-positive results. CONCLUSIONS: Algorithms based on MALDI-TOF MS, LFIAs and molecular testing may represent a cost-effective tool to timely identify Gram-negative species and detect resistance markers directly from BCs. According to local epidemiology, these results may allow antimicrobial stewardship interventions including prompt use of new approved drugs.

A Rapid and Specific Real-Time PCR Assay for the Detection of Clinically Relevant Mucorales Species.

Infections triggered by filamentous fungi placed in the order Mucorales, phylum Zygomycota, can cause serious harm to immunocompromised patients. Since there is lack of a standardized PCR (polymerase chain reaction) assay for early diagnosis of this fungal infection, this work was aimed to develop a new PCR assay able to detect the presence of Mucorales genera in clinical specimens. Here, we describe a novel diagnostic TaqMan MGB probe assay for precise and rapid detection of the most common clinical species of Mucorales. Zygomycete-specific oligonucleotides were designed to specifically amplify and bind highly conserved sequences of fungal 28S rRNA gene. Additionally, we succeeded in differentiating Mucorales species (i.e., Rhizopus, Lichtheimia, Mucor, and Rhizomucor) in artificially infected serum samples, suggesting that the quantitative capability of this real-time PCR assay could potentially optimize the diagnosis of mucormycosis.

Exposure to the agricultural fungicide tebuconazole promotes Aspergillus fumigatus cross-resistance to clinical azoles.

Resistance to clinical triazoles in Aspergillus fumigatus is a growing concern for individuals at high risk of Aspergillus infection. Two triazole resistance selection routes are currently being investigated: one occurring in triazole-treated patients in healthcare settings, and the second taking place in the environment due to the widespread use of agricultural triazoles. This study aimed to assess the ability of agricultural azoles to promote cross-resistance to clinical azoles in A. fumigatus. Five A. fumigatus isolates susceptible to clinical azoles were exposed to the triazole 14α-demethylase inhibitor, tebuconazole (TBC), and then antifungal susceptibility tests for voriconazole, itraconazole, posaconazole and isavuconazole were performed. Under TBC selection pressure, all A. fumigatus isolates exhibited resistance to clinical triazoles. However, only two displayed a multiresistant phenotype to clinical azoles. TBC exposure was also associated with delayed conidia formation and progressive absence of conidiation. Noteworthy, no TBC-exposed clones harbored TR34/L98H mutation, as judged by real-time PCR assays. The observation that TBC exposure promotes cross-resistance to clinical triazoles warrants careful and thorough assessment of the human health risk associated with agricultural azoles. The absence of TR34/L98H mutation in cross-resistant A. fumigatus isolates suggests that other cyp51A mutations may be involved in clinical azole cross-resistance.

Novel Silver-Functionalized Poly(ε-Caprolactone)/Biphasic Calcium Phosphate Scaffolds Designed to Counteract Post-Surgical Infections in Orthopedic Applications.

In this study, we designed and developed novel poly(ε-caprolactone) (PCL)-based biomaterials, for use as bone scaffolds, through modification with both biphasic calcium phosphate (BCP), to impart bioactive/bioresorbable properties, and with silver nitrate, to provide antibacterial protection against Staphylococcus aureus, a microorganism involved in prosthetic joint infections (PJIs). Field emission scanning electron microscopy (FESEM) showed that the samples were characterized by square-shaped macropores, and energy dispersive X-ray spectroscopy analysis confirmed the presence of PCL and BCP phases, while inductively coupled plasma-mass spectrometry (ICP-MS) established the release of Ag+ in the medium (~0.15-0.8 wt% of initial Ag content). Adhesion assays revealed a significant (p < 0.0001) reduction in both adherent and planktonic staphylococci on the Ag-functionalized biomaterials, and the presence of an inhibition halo confirmed Ag release from enriched samples. To assess the potential outcome in promoting bone integration, preliminary tests on sarcoma osteogenic-2 (Saos-2) cells indicated PCL and BCP/PCL biocompatibility, but a reduction in viability was observed for Ag-added biomaterials. Due to their combined biodegrading and antimicrobial properties, the silver-enriched BCP/PCL-based scaffolds showed good potential for engineering of bone tissue and for reducing PJIs as a microbial anti-adhesive tool used in the delivery of targeted antimicrobial molecules, even if the amount of silver needs to be tuned to improve osteointegration.

Advances in Microbiology, Infectious Diseases and Public Health: Fungal Occurrence in the Hair and Skin of Symptomatic Pets in Turin, Italy.

Companion animals, often asymptomatic reservoir of fungi, can be important sources of infection in humans, due to the close contact with their owners. The present study was aimed to assess the occurrence of dermatophytes and other fungi isolated from pet dermatological lesions in Turin, Italy. Dermatological specimens were examined for fungal elements by direct microscopy and cultured to detect dermatophytes, other filamentous fungi and yeasts: 247 pets (118 cats, 111 dogs and 18 dwarf rabbits) were positive for fungal detection in culture. Microsporum canis was the most frequent dermatophyte in cats and dogs, whereas Trichophyton mentagrophytes was the most common in rabbits. Among the other fungi, for all examined pets, dematiaceous fungi were the most isolated, followed by Mucorales, penicilli, yeasts and yeast-like fungi, and aspergilli. No gender predisposition was detected for dermatophyte growth; on the contrary, for the other fungi male cats were more susceptible than female. The highest fungal occurrence was recorded in <1-year-old cats for dermatophytes, and in <5-year-old cats and dogs for the other fungi. Autumn was the period associated with a relevant incidence of fungal infection. Finally, fungi were more frequent in non pure-breed cats and in pure-breed dogs. These data underline the importance to timely inform pet owners about the potential health risk of infection caused not only by dermatophytes but also by non-dermatophyte fungi, routinely considered to be contaminants or harmless colonizers, since their role as source of zoonotic infections is not to be excluded.

Advances in Microbiology, Infectious Diseases and Public Health: Refractory Trichophyton rubrum Infections in Turin, Italy: A Problem Still Present.

Dermatophytosis caused by Trichophyton rubrum is the most common cutaneous fungal infection in industrialized countries and worldwide with high recurrence and lack of treatment response. In addition, patients with cutaneous and concurrent toenail lesions are often misdiagnosed and therefore treated with an inappropriate therapy. In this study, we evaluated five previously misdiagnosed cases of T.rubrum chronic dermatophytosis sustained by two variants at sites distant from the primary lesion. Our patients were successfully treated by systemic and topical therapy, and 1 year after the end of therapy follow-up did not show any recurrence of infection.Our data indicate that the localization of all lesions, the isolation and the identification of the causative fungus are essential to establish the diagnosis and the setting of a correct therapeutic treatment to avoid recurrences.

Key Roles of Human Polymorphonuclear Cells and Ciprofloxacin in Lactobacillus Species Infection Control.

Lactobacilli have the potential to act as reservoirs of antibiotic resistance genes similar to those found in human pathogens, with the risk of transferring these genes to many pathogenic bacteria. In this study, we investigated the role of human polymorphonuclear cells (PMNs) against Lactobacillus spp. both resistant and susceptible to ciprofloxacin (a fluoroquinolone) and the effect of ciprofloxacin on the interaction between PMNs and three Lactobacillus spp. with different patterns of susceptibility to this drug. Hence, the primary functions of PMNs, such as phagocytosis and bacterial intracellular killing, against lactobacilli were investigated. The rate of PMN phagocytosis was high for ciprofloxacin-sensitive and ciprofloxacin-resistant strains. The patterns of intracellular killing of ciprofloxacin-sensitive and ciprofloxacin-resistant strains by PMNs underline that PMNs alone were able to kill lactobacilli. The addition of ciprofloxacin to PMNs did not result in a significant increase in the bacterial uptake by phagocytes. On the contrary, ciprofloxacin had a marked effect on PMN intracellular killing, resulting in increased numbers of killed ciprofloxacin-sensitive bacteria in comparison with antibiotic-free controls. Our data show that by itself, the profile of antibiotic resistance does not constitute an intrinsic factor of greater or lesser pathogenicity toward the host. The ability of PMNs to kill a diverse array of bacterial pathogens is essential for human innate host defense, primarily in immunocompromised patients.

Do crosslinking and vitamin E stabilization influence microbial adhesions on UHMWPE-based biomaterials?

BACKGROUND: Microorganism adhesion on polyethylene for total joint arthroplasty is a concern. Many studies have focused on vitamin E-stabilized ultrahigh-molecular-weight polyethylene (UHMWPE), whereas first-generation, highly crosslinked UHMWPE, which is the most commonly used in clinical practice, has been scarcely evaluated. QUESTIONS/PURPOSES: We aimed (1) to compare the adherence of Staphylococcus epidermidis, Staphylococcus aureus, Escherichia coli, and Candida albicans with virgin (untreated) UHMWPE (PE) and crosslinked UHMWPE (XLPE); (2) to correlate the results with the biomaterial surface properties; and (3) to determine whether the decreased adhesion on vitamin E-stabilized UHMWPE (VE-PE) previously recorded for bacteria can also be confirmed for C albicans. METHODS: Microbial adhesion of biofilm-producing American Type Culture Collection (ATCC) and clinical strains on XLPE and VE-PE were compared with PE at 3, 7, 24, and 48 hours of incubation and quantified, as colony forming units (CFU)/mL, using a sonication protocol. Sample surfaces were characterized by scanning electron microscopy, roughness and contact angle measurements, attenuated total reflection-Fourier transform infrared spectroscopy, and x-ray photoelectron spectroscopy (XPS) to reveal qualitative differences in surface composition and topography that could influence the microbial adhesion. The results were analyzed by descriptive statistics and tested by unpaired t-tests. RESULTS: All microorganisms, both ATCC and clinical strains, showed lower adhesion (p < 0.05) on XLPE with adhesion percentages ranging from 18% to 25%, compared with PE with adhesion percentages ranging from 51% to 55%, after 48 hours. Only the ATCC S epidermidis showed a reduced adhesion profile even at 3 hours (adhesion ratio of 14% on XLPE versus 50% on PE) and 24 hours (19% on XLPE versus 55% on PE) of incubation. ATCC and clinical C albicans were less adherent to XLPE than to PE (p < 0.05) showing even at the earlier incubation time points adhesion values always of 10(3) CFU/mL and 10(4) CFU/mL, respectively. Roughness and contact angle were 0.8 ± 0.2 µm and 92° ± 3°, respectively, with no differences among samples. Qualitative differences in the surface chemical composition were revealed by XPS only. A confirmation of the decreased adhesion on VE-PE respect to PE was also registered here for C albicans strains (p < 0.05). CONCLUSIONS: Vitamin E stabilization and crosslinking of UHMWPE are capable of reducing microbial adhesion. Further studies are needed to fully elucidate the mechanisms of modulation of microbial adhesion to medical-grade UHMWPE. CLINICAL RELEVANCE: Our results suggest that VE-PE and XLPE may have an added benefit of being more resistant to bacterial adhesion, even fungal strains.

In vitro antifungal activity of fluconazole and voriconazole against non-Candida yeasts and yeast-like fungi clinical isolates.

The risk of opportunistic infections caused by non-Candida yeasts and yeast-like fungi is increasingly common, mainly in immunocompromised patients. Appropriate first-line therapy has not been defined and standardized, mainly due to the low number of cases reported. To improve empirical treatment guidelines, we describe the susceptibility profile to fluconazole and voriconazole of 176 non-Candida yeasts and yeast-like fungi collected from hospitals in Piedmont, North West Italy from January 2009 to December 2013. The results showed that most isolates are susceptible to voriconazole (94%), but less susceptible to fluconazole (78%), suggesting that voriconazole could be used as first-line therapy in infections caused by these fungi.

Application of multiple laboratory tests for Mycobacterium avium ssp. paratuberculosis detection in Crohn's disease patient specimens.

The difficulties involved in detecting and enumerating Mycobacterium avium subsp. paratuberculosis (MAP) as a pathogen potentially involved in Crohn's disease (CD) are well known. This study aimed to improve this situation through the application of multiple laboratory diagnostic tests to detect and isolate this bacterium from different specimens collected from CD-patients and non-CD subjects as controls. A total of 120 samples (terminal ileum and colon biopsies, blood and stool) were obtained from 19 CD-patients and from 11 individuals who did not have a clinicopathological diagnosis of CD (non-CD controls) attending for ileocolonoscopy. All samples were processed by staining techniques, culture on both solid and liquid media, and Insertion Sequence 900/F57 real-time PCR. The MAP frequency in CD-patients was found in a significantly greater proportion than in non-CD subjects; the most positive samples were biopsies from CD-patients tested by real-time PCR. MAP detection in biopsies, and in the other samples, by applying multiple and validated laboratory diagnostic tests, could be a marker of active infection, supporting MAP involvement in CD.

New Generation of Osteoinductive and Antimicrobial Polycaprolactone-Based Scaffolds in Bone Tissue Engineering: A Review.

With respect to other fields, bone tissue engineering has significantly expanded in recent years, leading not only to relevant advances in biomedical applications but also to innovative perspectives. Polycaprolactone (PCL), produced in the beginning of the 1930s, is a biocompatible and biodegradable polymer. Due to its mechanical and physicochemical features, as well as being easily shapeable, PCL-based constructs can be produced with different shapes and degradation kinetics. Moreover, due to various development processes, PCL can be made as 3D scaffolds or fibres for bone tissue regeneration applications. This outstanding biopolymer is versatile because it can be modified by adding agents with antimicrobial properties, not only antibiotics/antifungals, but also metal ions or natural compounds. In addition, to ameliorate its osteoproliferative features, it can be blended with calcium phosphates. This review is an overview of the current state of our recent investigation into PCL modifications designed to impair microbial adhesive capability and, in parallel, to allow eukaryotic cell viability and integration, in comparison with previous reviews and excellent research papers. Our recent results demonstrated that the developed 3D constructs had a high interconnected porosity, and the addition of biphasic calcium phosphate improved human cell attachment and proliferation. The incorporation of alternative antimicrobials-for instance, silver and essential oils-at tuneable concentrations counteracted microbial growth and biofilm formation, without affecting eukaryotic cells' viability. Notably, this challenging research area needs the multidisciplinary work of material scientists, biologists, and orthopaedic surgeons to determine the most suitable modifications on biomaterials to design favourable 3D scaffolds based on PCL for the targeted healing of damaged bone tissue.

Facile One-Step Electrospinning Process to Prepare AgNPs-Loaded PLA and PLA/PEO Mats with Antibacterial Activity.

Nanofibers can play an important role in developing new kinds of medical applications. Poly(lactic acid) (PLA) and PLA/poly(ethylene oxide) (PEO) antibacterial mats containing silver nanoparticles (AgNPs) were prepared by a simple one-step electrospinning method that allows AgNPs to be synthesized simultaneously with the preparation of the electrospinning solution. The electrospun nanofibers were characterized by scanning electron microscopy, transmission electron microscopy and thermogravimetry, while silver release over time was monitored by inductively coupled plasma/optical emission spectroscopy. The antibacterial activity was tested against Staphylococcus epidermidis and Escherichia coli by colony forming unit (CFU) count on agar after 15, 24 and 48 h of incubation. AgNPs were found to be mainly concentrated in the PLA nanofiber core, and the mats showed steady but slow Ag release in the short term; in contrast, AgNPs were uniformly distributed in the PLA/PEO nanofibers, which released up to 20% of their initial silver content in 12 h. A significant (p < 0.05) antimicrobial effect towards both tested bacteria, highlighted by a reduction in the CFU/mL counts, was observed for the nanofibers of PLA and PLA/PEO embedded with AgNPs, with a stronger effect exerted by the latter, confirming the more efficient silver release from these samples. The prepared electrospun mats may have good potential for use in the biomedical field, particularly in wound dressing applications, where a targeted delivery of the antimicrobial agent is highly desirable to avoid infections.

Tuning of Silver Content on the Antibacterial and Biological Properties of Poly(ɛ-caprolactone)/Biphasic Calcium Phosphate 3D-Scaffolds for Bone Tissue Engineering.

There is a growing interest in tissue engineering, in which biomaterials play a pivotal role in promoting bone regeneration. Furthermore, smart functionalization can provide biomaterials with the additional role of preventing orthopedic infections. Due to the growing microbial resistance to antimicrobials used to treat those infections, metal ions, such as silver, thanks to their known wide range of bactericidal properties, are believed to be promising additives in developing antibacterial biomaterials. In this work, novel poly(ε-caprolactone) (PCL)-based 3D scaffolds have been designed and developed, where the polymer matrix was modified with both silver (Ag), to supply antibacterial behavior, and calcium phosphates (biphasic calcium phosphate, BCP) particles to impart bioactive/bioresorbable properties. The microstructural analysis showed that constructs were characterized by square-shaped macropores, in line with the morphology and size of the templating salts used as pore formers. Degradation tests demonstrated the important role of calcium phosphates in improving PCL hydrophilicity, leading to a higher degradation degree for BCP/PCL composites compared to the neat polymer after 18 days of soaking. The appearance of an inhibition halo around the silver-functionalized PCL scaffolds for assayed microorganisms and a significant (p < 0.05) decrease in both adherent and planktonic bacteria demonstrate the Ag+ release from the 3D constructs. Furthermore, the PCL scaffolds enriched with the lowest silver percentages did not hamper the viability and proliferation of Saos-2 cells. A synergic combination of antimicrobial, osteoproliferative and biodegradable features provided to 3D scaffolds the required potential for bone tissue engineering, beside anti-microbial properties for reduction in prosthetic joints infections.

Functional and phenotypical impairment of polymorphonuclear cells in atopic dermatitis: an additional cause for the known susceptibility to infections?.

BACKGROUND: Atopic dermatitis (AD) patients present an high susceptibility to infections. The phagocytic activity of polymorphonuclear granulocytes (PMNs) is mediated by the interactions between Toll-like receptors (TLRs) and pathogen-associated molecular patterns. OBJECTIVE: To investigate functional activity and phenotype of PMNs in AD patients. METHODS: In vitro PMN phagocytosis and intracellular killing towards Klebsiella pneumoniae were evaluated in 24 AD patients; flow cytometry was applied to analyze PMN phenotype. RESULTS: PMNs from AD patients displayed both reduced phagocytic activity and intracellular killing against K. pneumoniae than healthy subjects (HS). CD11b, CD66b, TLR2, TLR4 and TLR5 median fluorescence intensity (MFI) on PMN membrane were significantly higher in AD patients than in HS. CONCLUSION: PMN functional impairment in AD patients could represent an additional cause of skin infections, coupled with other known defects in the innate immune system. The increased MFI of adhesion molecules and TLRs is rather a consequence of the increased skin barrier permeability to bacterial molecules capable of stimulating immunological reactions.

Positive interaction of thyme (red) essential oil with human polymorphonuclear granulocytes in eradicating intracellular Candida albicans.

The essential oils have started to be recognized for their potential antimicrobial role only in recent years. Clinical experience showed that the efficacy of antimicrobial agents depends not only on their direct effect on a given microorganism but also on the functional activity of the host immune system. Since data on the effects of essential oils on the innate immune system are scanty and fragmentary, the aim of this study was to evaluate the influence of thyme (red) essential oil (EO), at subinhibitory/inhibitory concentrations, on intracellular killing activity by human polymorphonuclear granulocytes (PMNs) against Candida albicans. In order to provide a frame of reference for the activity of this EO, its in vitro killing activity in the absence of PMNs was also evaluated.Results showed that EO at subminimal inhibitory (subMIC)/minimal inhibitory (MIC) concentrations significantly enhanced intracellular killing of C. albicans in comparison with EO-free controls and was comparable to the positive control (fluconazole). In in vitro killing assays without PMNs, we observed progressive growth of the yeast cells in the presence of EO subMIC/MIC concentrations. A positive antifungal interaction with phagocytes could explain why this EO, which appeared to be only fungistatic in time-kill assays, had efficacy in killing yeast cells once incubated with PMNs.

Current Knowledge on Biomaterials for Orthopedic Applications Modified to Reduce Bacterial Adhesive Ability.

A significant challenge in orthopedics is the design of biomaterial devices that are able to perform biological functions by substituting or repairing various tissues and controlling bone repair when required. This review presents an overview of the current state of our recent research into biomaterial modifications to reduce bacterial adhesive ability, compared with previous reviews and excellent research papers, but it is not intended to be exhaustive. In particular, we investigated biomaterials for replacement, such as metallic materials (titanium and titanium alloys) and polymers (ultra-high-molecular-weight polyethylene), and biomaterials for regeneration, such as poly(ε-caprolactone) and calcium phosphates as composites. Biomaterials have been designed, developed, and characterized to define surface/bulk features; they have also been subjected to bacterial adhesion assays to verify their potential capability to counteract infections. The addition of metal ions (e.g., silver), natural antimicrobial compounds (e.g., essential oils), or antioxidant agents (e.g., vitamin E) to different biomaterials conferred strong antibacterial properties and anti-adhesive features, improving their capability to counteract prosthetic joint infections and biofilm formation, which are important issues in orthopedic surgery. The complexity of biological materials is still far from being reached by materials science through the development of sophisticated biomaterials. However, close interdisciplinary work by materials scientists, engineers, microbiologists, chemists, physicists, and orthopedic surgeons is indeed necessary to modify the structures of biomaterials in order to achieve implant integration and tissue regeneration while avoiding microbial contamination.