Photobiomodulation therapy and 3% potassium nitrate gel as treatment of cervical dentin hypersensitivity: a randomized clinical trial.

OBJECTIVES: This randomized controlled trial aimed to evaluate different protocols for dentin hypersensitivity treatment with low-power lasers and desensitizing agents, and the association between low-power lasers and desensitizing agents. MATERIALS AND METHODS: Fifty-four patients (303 teeth) were randomly allocated to three groups: G1, 3% nitrate potassium gel, UltraEZ (n = 17); G2, photobiomodulation therapy (PBM) with a low-level infrared laser (n = 17), 100 mW, spot size of 0.028 cm2, and dose of 1 J per point; and G3, nitrate potassium + PBM (n = 20). Treatments were applied to the buccal cervical region at intervals of 72 h, and all protocols were performed in three sessions. The patients' response to evaporative stimuli was rated using the visual analog scale (VAS). Re-evaluations were performed immediately after each application and 1 week, 1 month, and 3 months after treatment. A two-way repeated measures test and Tukey's post hoc test were used for multiple comparisons (α = 5%). RESULTS: There was a reduction in pain levels at the end of treatment in all groups. There were no significant differences in VAS score changes between the groups immediately after treatment and after the third month, compared to the baseline (p > 0.05). CONCLUSION: Under the limitations of this in vivo study, the proposed three-session protocol was effective in reducing dentin hypersensitivity after 3 months, regardless of the desensitization mechanism used. Conservative and long-term protocols are interesting for the control of pain caused by dentin hypersensitivity. CLINICAL RELEVANCE: The increase in cervical dentin hypersensitivity prevalence warrants easy-to-apply and long-lasting desensitizing protocols for pain control.

Effect of Nd:YAG laser irradiation, used as a desensitizing strategy, on bond strength to simulated hypersensitive dentin.

OBJECTIVES: To evaluate the effect of Nd:YAG laser irradiation as a prior desensitizing strategy on immediate and medium-term microtensile bond strength (µTBS) to simulated hypersensitive dentin. MATERIALS AND METHODS: Flat mid-coronal dentin was obtained from third molars and submitted to a 600-grit SiC paper (1 min; N: normal dentin) or subsequently challenged with citric acid (6%, 1 min; H: simulated hypersensitive dentin). Afterwards, dentin was or was not (C: control; HC, NC - each n = 7) irradiated with Nd:YAG laser (L: laser; 1.0 W/10 Hz/100 mJ/4 irradiations of 50-60 s; HL, NL - each n = 7). A 2-step self-etch adhesive (Clearfil SE Bond) was applied and composite (Filtek Z350) buildups were constructed. After 24-h (distilled water/37 °C) storage, specimens were sectioned into beams and tested (µTBS; 0.5 mm/min) immediately or after 6-month aging. Three-way ANOVA and Tukey tests were applied (α = 0.05). Qualitative evaluation of the adhesive interface (n = 1 extra tooth per group) was performed by Confocal Laser Scanning Microscopy. RESULTS: Substrate condition (p < 0.001), laser irradiation (p < 0.001), and aging (p = 0.002) influenced the results. Furthermore, there was interaction between substrate and irradiation (p < 0.001). Laser irradiation favored µTBS exclusively to hypersensitive dentin immediately and after aging. µTBS to hypersensitive dentin was higher than that to the normal substrate only when it was laser-irradiated. In any case, immediate µTBS was always higher than that after aging. CLSM revealed longer and more numerous resin tags for simulated hypersensitive dentin, and shorter and fewer resin tags for laser-irradiated dentin. No differences were observed in the hybrid layer itself. CONCLUSION: Nd:YAG laser irradiation prior to restoration favored the µTBS of a self-etch adhesive and resin composite to hypersensitive dentin. CLINICAL RELEVANCE: Desensitizing strategies are usually tried before performing restorative treatments in hypersensitive dentin; therefore, they may influence behavior of the adhesive interface established. However, instead of causing concern, Nd:YAG laser irradiation revealed a favorable effect on the aforementioned interface.

Increasing dental zirconia micro-retentive aspect through ultra-short pulsed laser microstructuring: study on flexural strength and crystal phase characterization.

OBJECTIVES: Although ultra-short pulsed laser (USPL) microstructuring has previously improved zirconia bond-strength, it is yet unclear how different laser-machined surface microstructures and patterns may influence the material's mechanical properties. Therefore, the aim of this study was to assess the flexural strength of zirconia after different USPL settings creating three different geometrical patterns with structures in micrometer scale. METHODS: One hundred sixty zirconia bars (3Y-TZP, 21 × 4 × 2.1 mm) were prepared and randomly divided into five groups (n = 32): no surface treatment (negative control-NC); sandblasting with Al2O3 (SB); and three laser groups irradiated with USPL (Nd:YVO4/1064 nm/2-34 J/cm2/12 ps): crossed-lines (LC), random-hatching (LR), and parallel-waves (LW). Bars were subjected to a four-point flexural test (1 mm/min) and crystal phase content changes were identified by X-ray diffraction. Surface roughness and topography were analyzed through 3D-laser-profilometry and SEM. Data were analyzed with parametric tests for roughness and Weibull for flexural strength (α = 5%). RESULTS: LR (Mean[95%CI]: 852.0 MPa, [809.2-894.7]) was the only group that did not show a significantly different flexural strength than NC (819.8 MPa, [796.6-842.9]), (p > 0.05). All laser groups exhibited higher Weibull moduli than NC and SB, indicating higher reliability and homogeneity of the strength data. An increase of monoclinic phase peak was only observed for SB. CONCLUSION: In conclusion, USPL created predictable, homogeneous, highly reproducible, and accurate surface microstructures on zirconia ceramic. The laser-settings of random-hatching (12 ps pulses) increased 3Y-TZP average surface roughness similarly to SB, while not causing deleterious crystal phase transformation or loss of flexural strength of the material. Furthermore, it has increased the Weibull modulus and consequently material's reliability. CLINICAL SIGNIFICANCE: Picosecond laser microstructuring (LR conditions) of 3Y-TZP ceramic does not decrease its flexural strength, while increasing materials realiability and creating highly reproducible and accurate microstructures. These features may be of interest both for improving clinical survival of zirconia restorations as well as enhancing longevity of zirconia implants.

Efficacy of a calcium-phosphate/fluoride varnish and ionomeric sealant on cervical dentin hypersensitivity: A randomized, double-blind, placebo-controlled clinical study.

BACKGROUND: Dentin hypersensitivity (DH) is a common problem in the population that can have a significant impact on the quality of life of those who suffer from the condition. OBJECTIVES: Compare the efficacy of two treatments for DH: Ca/PO4 - /F- varnish (Clinpro White Varnish) and ionomeric sealant (IS) (Clinpro XT Varnish) with a placebo. METHODS: Participants (121) with at least one tooth with visual analogue scale (VAS) score of 4 and above were randomly and blindly allocated to the groups. Treatments were performed by a trained researcher. DH was evaluated by another blind researcher after the treatment and after 1 week, 4 weeks, 3 months and 6 months. After 4 weeks, placebo received the DH treatment with IS; thus, the participants were not assessed after 3 and 6 months. Primary outcome was DH reduction after 4 weeks. Differences in VAS scores in the other time intervals and entire values of VAS were considered secondary outcomes. Comparisons were made among the groups (α = 0.05). RESULTS: IS showed the highest VAS value difference between baseline and 4 weeks (mean ± SD: 3.7 ± 2.2), differing significantly from placebo (2.3 ± 1.7) and Ca/PO4/F- varnish (2.6 ± 2.0). Ca/PO4- /F- varnish did not differ from placebo. In all time intervals, VAS values of all groups were significantly lower than the baseline value, without differences among groups. For the long-term differences in VAS values (3 and 6 months), the IS exhibited significantly higher values than Ca/PO4- /F- varnish. CONCLUSIONS: The IS was the most efficacious product for reducing DH, whereas Ca/PO4- /F- varnish did not differ from placebo. Registered in ClinicalTrials.gov (NCT04591444).

Involvement of substance P, osteopontin and satellite glial cells on photobiomodulation-induced antinociceptive effect in an experimental model of dentin hypersensitivity.

The aim of this work was to investigate the involvement of substance P (SP), osteopontin (OPN), and satellite glial cells (SGC) on photobiomodulation-induced (PBM) antinociceptive effect in an experimental model of dentin hypersensitivity (DH). Rats ingested isotonic drink (ID, pH 2.87) for 45 consecutive days and after this period received PBM irradiation at λ660 nm or λ808 nm (1 J, 3.5 J/cm2, 100 mW, 10 s, 0.028 cm2, continuous wave, 3 consecutive daily sessions), and were evaluated for nociceptive behavior 24, 48, 72 h, and 14 days after laser treatments. ID ingestion induced an increase on thermal sensitivity of DH characteristics in rats that was completely reversed by PBM treatment at both 660 and 808 nm. Immunohistochemical analysis revealed increased SP expression at both dentin-pulp complex (DPC) and trigeminal ganglia (TG) of DH-rats which did not occur in PBM groups by PBM treatment. Also, the increase of glial fibrillary acidic protein (GFAP) observed in the TG of DH-rats was also reversed by PBM treatment. Finally, PBM at both 660 and 808 nm increased OPN expression in the dentin-pulp complex of DH-rats after 14 days of PBM treatment. All in all, this data demonstrates that PBM reverses nociception in a DH experimental model by inhibiting neurogenic inflammation and inducing a regenerative response.

In situ evaluation of desensitizing toothpastes for protecting against erosive tooth wear and its characterization.

OBJECTIVE: This five-phase, single-blind, crossover in situ trial evaluated the effects of desensitizing or anti-erosive toothpastes on dentin erosive wear and tubule occlusion. MATERIALS AND METHODS: Some characteristics such as relative dentin abrasivity (RDA), viscosity (V), cytotoxicity, and fluoride and calcium (Ca) availability of the toothpastes were also tested. Samples were positioned on removable intraoral appliances from 15 volunteers (n=4), according to the groups, C-control (0 ppm fluoride), F-sodium monofluorophosphate (MFP), A-MFP and arginine+calcium carbonate, CSP-calcium sodium phosphosilicate, and CS-MFP and calcium silicate+sodium phosphate. Erosion-abrasion cycling was performed (1% citric acid, 2min, 6×/day; toothbrushing, 5s, 2×/day). Surface loss (SL) was evaluated by optical profilometry. Environmental scanning electron microscopy images (ESEM) counted the number of open dentin tubules (ODTs). Data were statistically analyzed (α=0.05). RESULTS: There were no significant differences in SL among groups (p=0.468). The ODT for CSP, CS, and A groups were significantly lower than the control. CSP and CS presented significantly less ODT than F, but they did not significantly differ from A. F and CS were more abrasive than all the other toothpastes; CSP was more abrasive than A, and C was the least abrasive. CSP presented higher V (p<0.05). All toothpastes presented lower cell viability than the control without toothpaste exposure. F and A presented significantly higher values of F- (p<0.05). All fluoride toothpastes had similar amount of Ca, differing from the control (p<0.05). CONCLUSION: Although the toothpastes caused similar degree of erosive wear, CSP and CS were able to occlude the dentin tubules. CLINICAL RELEVANCE: Desensitizing toothpastes containing calcium, sodium, phosphate, and silicate could be a suitable option for treating dentin hypersensitivity.

Charcoal-based dentifrices: Effect on color stability and surface wear of resin composites.

OBJECTIVE: To evaluate the effect of charcoal-based dentifrices on the color change (CC) and surface wear (SW) of resin composites. MATERIALS AND METHODS: Five dentifrices, including three toothpastes: Colgate total-12 (C12), Black is the new White (CPX), and Natural (NAT); and two powders: Carvvo (CVV) and Whitemax (WMX), were evaluated. Composite blocks (5x5x2mm- Z350 3 M/ESPE, shade A2) were subjected to 417 and 5004 brushing cycles. The CC (n = 7, CIEDE2000; ΔE00 ) was evaluated using a spectrophotometer. SW (n = 5) was assessed using profilometry. The dentifrice particles were characterized by scanning electron microscopy (SEM). RESULTS: In 417 brushing cycles, resin composite exhibited higher color change upon being exposed to NAT, CVV and WMC than to C12 (p ≤ 0.05). In 5004 brushing cycles, resin composite showed higher color change values when exposed to all dentifrices, except C12 (p ≤ 0.05). The powders promoted higher SW on resin composite than C12 in both evaluation times (p ≤ 0.05). In 417 cycles, WMX caused higher SW on composite than C12, CPX, and NAT (p ≤ 0.05). No significant different SW was found between powders and charcoal-based toothpastes after 5004 brushing cycles (p > 0.05). SEM showed larger particles for powder than for toothpaste dentifrices. CONCLUSION: Within the limitations of this study, both null hypotheses have been rejected. Resin composites exposed to charcoal-based dentifrices exhibited significantly (p ≤ 0.05) higher color change and surface wear than conventional toothpastes. CLINICAL SIGNIFICANCE: Color change and surface wear shown by charcoal dentifrices may compromise the longevity of restorations.

The effect of a single irradiation of low-level laser on nipple pain in breastfeeding women: a randomized controlled trial.

Photobiomodulation with low-level laser therapy (PBM-LLLT) has been introduced as a new tool to relieve nipple pain and repair nipple damage in breastfeeding women; however, evidence is needed to assess its effectiveness. The aim was to evaluate the effect of a single application of PBM-LLLT for breastfeeding women with nipple pain and damage; side effects were also collected. We conducted a randomized double-blinded controlled trial with women with nipple damage who were exclusively breastfeeding and rooming-in at Amparo Maternal maternity service, São Paulo, Brazil (May 2016 to May 2017). Women were randomly assigned into laser (n = 40) or control group (n = 40). Intervention was a single irradiation (660 nm, 100 mW, 2 J, 66.66 J/cm2, 3.3 W/cm2, 20 s of irradiation, punctual, and continuous mode) applied directly. Women reported pain levels at recruitment (before and immediately after irradiation), 6 and 24 h after the treatment. Pain level during a breastfeed was assessed using the Visual Analogue Scale (0 to 10). The primary outcome was the level of nipple pain immediately after the laser irradiation. Data were analyzed using hierarchical model and Wald test. At baseline, pain levels were similar (mean of 7.4 in laser group and 7.1 in control group). Women's perception of pain reduced approximately one point in both groups. Thirty-one percent of participants in the laser group (11/36) reported secondary effects, such as tingling (10/36) and pricking (2/36). The laser protocol of a single application was not effective in reducing pain in women with damaged nipples. Tingling sensation may be experienced by women receiving laser treatment for nipple damage.

Toothpaste factors related to dentine tubule occlusion and dentine protection against erosion and abrasion.

OBJECTIVES: To investigate the effect of toothpastes on dentine surface loss and tubule occlusion, and the association of toothpaste-related factors to each of the outcomes. MATERIALS AND METHODS: One hundred and sixty human dentine specimens were randomly distributed into 10 groups, according to different toothpastes. The specimens were submitted to artificial saliva (60 min), citric acid (3 min), and brushing abrasion (25 s; totalizing 2 min in toothpaste slurries). This was repeated five times and two outcome variables were analyzed: dentine surface loss (dSL; µm) and tubule occlusion by measurement of the total area of open tubules (Area-OT; µm2). Data were analyzed with Kruskal-Wallis and Mann-Whitney tests (α = 0.05); bivariate and multivariate regressions were used to model the association of the chemical (pH, concentration of F-, Ca2+, and PO43- and presence of Sn2+) and physical (% weight of solid particles, particle size, and wettability) factors of the toothpastes to both outcome variables. RESULTS: Toothpastes caused different degrees of dSL and did not differ in Area-OT. All chemical and physical factors, except the presence of Sn2+, were associated with dSL (p < 0.001). Area-OT was associated only with the presence of Sn2+ (p = 0.033). CONCLUSION: Greater dSL was associated with lower pH, lower concentration of F-, higher concentration of Ca2+ and PO43-, greater % weight of solid particles, smaller particle size, and lesser wettability, whereas tubule occlusion was associated with the presence of Sn2+. CLINICAL RELEVANCE: Depending on their chemical and physical composition, toothpastes will cause different degrees of dentine tubule occlusion and dentine surface loss. This could, in turn, modulate dentine hypersensitivity.

Efficacy of low-level laser therapy associated with fluoride therapy for the desensitisation of molar-incisor hypomineralisation: Randomised clinical trial.

BACKGROUND: Molar-incisor hypomineralisation (MIH) is a qualitative enamel defect. AIM: To investigate the low-level laser therapy (LLLT) associated with fluoride varnish for the desensitisation of teeth with MIH. DESIGN: A randomised clinical trial was conducted with 66 children, randomly allocated to the treatments: laser (L); fluoride varnish (FV); and laser + fluoride varnish (L + FV). The participants in the L group underwent two sessions of LLLT (48-hour interval). The FV group received four applications of varnish at one-week intervals. The L + FV underwent two sessions of LLLT and four applications of varnish. Prior to each session and one month after the onset of treatment, tooth sensitivity and its magnitude were evaluated. Intra- and inter-group comparisons were performed (α = 5%). RESULTS: A significant reduction in the mean sensitivity score was found over time in all groups. After the final treatment, a significant difference was found between the L and L + FV groups (P = .011), with a lower score in the L + FV group (0.09), whereas no difference was found between the FV and L + FV groups (P = .095). CONCLUSIONS: Fluoride varnish and the combination of treatments (L + FV) had greater desensitising action on teeth with MIH. Laser therapy demonstrated an immediate desensitising effect, whereas fluoride varnish had a late-onset effect.

Nd:YAG laser and calcium sodium phosphosilicate prophylaxis paste in the treatment of dentin hypersensitivity: a double-blind randomized clinical study.

AIM: This double-blind, placebo-controlled, randomized clinical trial evaluated the effectiveness of Nd:YAG laser and a calcium sodium phosphosilicate-containing paste (NovaMin®) in the treatment of cervical dentin hypersensitivity (CDH). MATERIALS AND METHODS: Seventy patients were randomly allocated into the following experimental groups: control-placebo, calcium sodium phosphosilicate paste (NovaMin®), and Nd:YAG laser (1 W, 10 Hz, 85 J/cm2). Pain was evaluated by means of a visual analog pain scale (VAS) after evaporative stimulation with a jet of air and tactile stimulation with an exploratory probe, before treatment (baseline) and after 5 min, 1week, and 4 weeks. When patients presented more than one tooth with CDH, the mean of the values obtained was calculated. Irradiation with Nd:YAG laser was performed twice in the mesial-distal and twice in the occlusal-gingival direction. The NovaMin®-containing paste was applied with a rubber cup at low speed for 60 s. Patients of the placebo group received simulations of the two treatments. As the data presented normal distribution, the two-way ANOVA repeated measures test was used. RESULTS: In all the experimental times, reduction in pain was demonstrated in comparison with baseline for all treatments (p < 0.05); however, there was no difference among the experimental groups in any of the time intervals evaluated (p > 0.05). CONCLUSION: All treatments were equally effective in reducing the pain of CDH. CLINICAL RELEVANCE: Nd:YAG laser irradiation and the calcium sodium phosphosilicate paste could reduce the symptoms of CDH; thus, they stand out as viable alternatives for the treatment of this condition.

Effect of gel replacement during in-office dental bleaching: a case report.

In-office dental bleaching allows the dentist to have greater control of the procedure and prevents patients from ingesting chemicals. To obtain optimum results, in-office bleaching usually requires a longer period of application as well as changes of the bleaching agent applied to the tooth surfaces at each appointment. The objective of this case report was to assess, by means of a split-mouth design in a single patient, the final tooth color and tooth sensitivity resulting from 2 different bleaching protocols: 1 application of 35% hydrogen peroxide for 45 minutes and 3 applications of 35% hydrogen peroxide for 15 minutes each. Neither the patient nor 5 individuals who were blinded to the techniques noted a difference in the final esthetic results of the 2 protocols immediately after the procedure. In addition, the patient reported that no tooth sensitivity was associated with either protocol. The results of dental bleaching on both sides were maintained after 15 days. The results shown in the present case report suggest that there may be no need to renew the gel during in-office dental bleaching.

Is photobiomodulation (PBM) effective for the treatment of dentin hypersensitivity? A systematic review.

The present study aims to evaluate the current scientific data regarding the effectiveness of photobiomodulation (PBM) in the treatment of dentin hypersensitivity (DH) as an alternative method for pain control. A systematic review was conducted to assess the effectiveness of PBM as treatment for DH. A complete literature search was performed up to October 2016. Searches were conducted using Boolean operators and MeSH terms. References of all selected full-text articles and related reviews were scanned. A total of 280 articles were identified (241 articles were excluded by the title and abstract). Of the 39 articles selected for analysis, 36 were excluded because they presented one or more exclusion criteria. Therefore, three articles were qualified for inclusion in this systematic review. PBM may not lead to adverse effects provided that adequately controlled parameters are followed when treating DH. More consistent studies should be conducted in order to adequately observe the advantageous therapeutic effect of PBM.

Efficacy of Photocoagulation of Vascular Malformations in the Oral Mucosa Using Nd: YAG Laser.

The purpose of this study was to analyze the effectiveness of Nd: YAG laser photocoagulation in the treatment of vascular malformations in the oral and perioral area; 93 patients (104 lesions) were evaluated in an Ambulatory of Oral Medicine (2006-2013). The sample consisted of 57 women (61%) and 36 men (39%), aged 8 to 85 years. The lesion size was smaller than 3 cm in most patients. The lesions were located on the lips, jugal mucosa, tongue, palate, gingiva, and retromolar trigone. All patients were treated on an outpatient basis using local anesthesia and Nd: YAG laser (Power Laser C ) with a wavelength of 1064 nm and a fiber optic diameter of 400 µm. After treatment no patients had complications, however, in patients of deep lesions, 2 or more irradiations were required to treat the lesions. Finally, the authors conclude that the clinical and aesthetic satisfactory results of the 93 patients treated with Nd: YAG laser suggest that this type of laser is effective and safe in the treatment of oral and perioral vascular malformations.

Effect of desensitizing toothpastes on dentin erosive wear and tubule occlusion. An in situ study.

PURPOSE: To evaluate the effect of desensitizing dentifrices on dentin wear and tubule occlusion using a three-phase, single blind, crossover in situ trial. METHODS: The dentifrices containing Arginine and calcium carbonate (1,450 ppmF) and Novamin, (~1,426 ppmF) were tested in two conditions: A: abrasion and B: erosion/abrasion. A dentifrice without desensitizing agents was used as control (1,450 ppmF). In each study phase, 10 volunteers used intra-oral appliances containing dentin specimens (pre-treated with EDTA, to simulate hypersensitive dentin), which were either submitted to erosion with a cola-like drink (pH 2.6), 4×/day (2 minutes), followed by toothbrushing, using electric toothbrushes, with standard pressure (2×/ day, 5 seconds), or toothbrushing only. Dentin surface loss (SL, in µm) was determined with optical profilometry at the 3rd and 5th days of cycling. Dentin surface was analyzed with environmental scanning electron microscopy (ESEM), post EDTA and post cycling, and the dentin tubules were counted using Image J software. Data were statistically analyzed (α= 0.05). RESULTS: For condition A and B, there were no significant differences in SL among toothpastes in both experimental times. There were also no significant differences between times within groups. For ESEM, in A, Toothpaste with Novamin was the only dentifrice that showed significantly less opened tubules post cycling than post EDTA. In B, Toothpaste with Novamin and control toothpaste presented less opened tubules post cycling. In conclusion, toothbrushing with the tested dentifrices promoted similar levels of dentin loss; however, for tubule occlusion, the toothpaste with Novamin was the only toothpaste effective for both conditions, abrasion and erosion/abrasion. CLINICAL SIGNIFICANCE: Ideally, desensitizing dentifrices should promote obliteration of the dentin tubules or nerve desensitization, without further contributing to the progression of dentin wear.

Photobiomodulation versus direct restoration in a patient presenting with dentinal hypersensitivity: a 6-month follow-up.

Despite nearly a century of research, the treatment of cervical dentinal hypersensitivity (DH) remains challenging. This case report discusses the indications for different approaches to the treatment of DH in a single patient; the chosen alternatives took into account the different degrees of tooth wear and levels of pain at different sites. A 31-year-old woman reported DH in the maxillary right canine and first premolar and the maxillary left lateral incisor and canine in response to thermal, tactile, and osmotic stimuli. Clinical examination revealed that the teeth on the right side presented noncarious cervical lesions deeper than 1 mm, while the teeth on the left side presented only minimal wear. Therefore, the right canine and premolar were restored with composite resin to create a mechanical barrier against stimuli and reestablish form, function, and esthetics. Prior to restoration, the teeth on the right side were irradiated with a low-power laser (808 nm, 100 mW, 1.1 J/point, 10 seconds), which was applied in a single session at 2 locations on each tooth. In contrast, the left lateral incisor and canine were irradiated in 3 sessions with the low-power laser, which reduces pain levels and depolarizes nerve fibers by means of cell biomodulation, and received no restorations. A visual analog scale (0.0-10.0) was used to record the patient's pain, and it was found that pain levels for the restored teeth decreased from 9.4 initially to 0.0 immediately after restoration, and pain levels for the irradiated teeth decreased from 5.4 initially to 2.0 after 3 sessions. After 6 months of clinical evaluation, both sets of teeth showed scores of 0.0 (no pain). Based on the results presented, it can be concluded that both treatments provided satisfactory outcomes when applied for the appropriate indication.

Evaluation of different treatment protocols for dentin hypersensitivity: an 18-month randomized clinical trial.

This randomized and longitudinal in vivo study aimed to assess different protocols for the treatment of dentin hypersensitivity with low-power laser (with different doses), high-power laser, and a desensitizing agent, for a period of 12 and 18 months. The lesions from 32 patients (117 lesions), who were submitted to the inclusion and exclusion criteria, were divided into nine groups (n = 13): G1: Gluma Desensitizer (Heraeus Kulzer), G2: low-power laser with low dose (three points of irradiation in vestibular portion and an apical point 30 mW, 10 J/cm2, 9 s per point with the wavelength of 810 nm, with three sessions with an interval of 72 h), G3: low-power laser with high dose (one point in the cervical area, and one apical point 100 mW, 40 J/cm2, 11 s per point with the wavelength of 810 nm in three sessions with an interval of 72 h), G4: low-power laser with low dose + Gluma Desensitizer, G5: low-power laser with high dose + Gluma Desensitizer, G6: Nd:YAG laser (Power Laser™ ST6, Research® in contact 1.0 W, 10 Hz and 100 mJ, ≈85 J/cm2, with the wavelength of 1064 nm), G7: Nd:YAG laser + Gluma Desensitizer, G8: low-power laser with low dose + Nd:YAG laser, and G9: low-power laser with high dose + Nd:YAG laser. The level of sensitivity of each volunteer was assessed by visual analog scale of pain (VAS) with the aid of air from the triple syringe and exploration probe, 12 and 18 months after treatment. All analyses were performed separately for air and probe stimulus. The level of significance was considered for values of p < 0.05. After statistical analysis, all treatments were shown to be effective in reducing dentinal hypersensitivity, and the results were considered not statistically different from those at 12 months. Therefore, until the 18-month evaluation, it could be said that no statistical differences were observed in the sensitivity levels for all treatments.

Progression of erosive lesions after Nd:YAG laser and fluoride using optical coherence tomography.

This study aimed to use optical coherence tomography (OCT) to assess the progression of erosive lesions after irradiation with Nd:YAG laser and application of topical fluoride. One-hundred and twenty dentin samples (4 × 4 × 2 mm) obtained from bovine incisors were used. Samples were protected with acid-resistant nail varnish, with exception of a central circular area 2 mm in diameter. All samples were submitted to erosive cycles with citric acid solution 0.05 M (citric acid monohydrate-C6H8O7·H2O); M = 210.14 g/mol) pH 2.3, at room temperature, for 20 min, 2×/day, throughout 20 days. After 10 days of acid challenges, lesions became visible, and each group received a different treatment (n = 15): control (without treatment), topical application of sodium fluoride 2 % for 4 min; Nd:YAG laser with different irradiation parameters (1, 0.7, and 0.5 W); and the association of fluoride with the laser parameters. OCT readouts were performed on day 01 (before the first acid challenge-OCT1), on day 05 (OCT2), day 10 (OCT3-after treatment), day 15 (OCT4), day 17 (OCT5), and day 20 (OCT6). The OCT images generated made it possible to measure the amount of tooth tissue loss over the 20 days of erosive cycle, before and after treatments, and to monitor early dentin demineralization progression. After statistical analysis, the fluoride group was observed to be the one that showed smaller loss of tissue over time. The OCT technique is promising for diagnosing and monitoring erosive lesion damage; however, further in vitro and in vivo research is needed to improve its use.

The association between Nd:YAG laser and desensitizing dentifrices for the treatment of dentin hypersensitivity.

This study aims to evaluate the association between Nd:YAG laser (with and without a photoabsorber) and two desensitizing dentifrices containing 15% NovaMin or 8% arginine, as potential treatments for dentin hypersensitivity (DH). DH was simulated by EDTA application for 2 min. Specimens were then analyzed with an environmental scanning electron microscope (ESEM) to ensure open dentin tubules (ODT), counted by using ImageJ software. Specimens were randomized into eight groups (n = 10): Laser (L), Laser+Photoabsorber (LP), Arginine (A), Arginine+Laser (AL), Arginine+Laser+Photoabsorber (ALP), NovaMin (N), NovaMin+Laser (NL), and NovaMin+Laser+Photoabsorber (NLP). Laser irradiation was performed with 1 W, 100 mJ, 10 Hz, ≅85 J/cm2; 4 irradiations of 10 s each, with 10 s intervals between them. After treatment, specimens were again analyzed by ESEM and submitted to erosive/abrasive cycling for 5 days. A final ESEM analysis was performed. Data were analyzed with two-way repeated measure ANOVA and Tukey tests (α = 0.05). After treatment, groups N, NL, and NLP presented the lower number of ODT, but they did not different from LP, ALP, and AL. Group A presented the highest number of ODT and it did not differ from group L. Groups L, AL, ALP, and LP presented intermediate results, without differing from each other. After cycling, group A presented the highest number of ODT and did not differ significantly from the other groups, except NLP. None of the associations tested presented better tubule occlusion than NovaMin by itself. Arginine was the only treatment that presented improved tubule occlusion when associated with Nd:YAG laser.

The potential of low-power laser for reducing dental sensitivity after in-office bleaching: a case report.

Postoperative sensitivity is one of the most common side effects of in-office bleaching with hydrogen peroxide. Laser phototherapy (LPT) has been suggested as an adjunctive treatment to prevent or minimize tooth sensitivity. This case report aimed to verify the efficacy of LPT in the reduction of sensitivity after in-office bleaching. Tooth bleaching was performed with 35% hydrogen peroxide activated with a hybrid LED-laser device. Immediately after the bleaching treatment, the patient reported dental sensitivity, as measured with a visual analog scale (VAS). To reduce sensitivity, LPT was applied with a 780-nm laser using the following parameters: 70 mW, exposure time of 10 seconds per point of irradiation (middle region of the buccal surfaces of each compromised tooth) in contact mode, energy of 1 J per point. Immediately after LPT, the patient reported a substantially lower level of pain on the VAS. Twenty-four hours after bleaching, the score on the VAS indicated that sensitivity levels had rebounded, and the patient received additional LPT. After 48 hours, the patient reported no dental sensitivity. The results in this patient indicated that irradiation with an infrared low-power laser substantially reduced dental pain generated by bleaching, suggesting that LPT should be considered as an auxiliary method to reduce postbleaching tooth sensitivity.