Platinum-Iridium Alloy Nanoparticle Coatings Produced by Electrophoretic Deposition Reduce Impedance in 3D Neural Electrodes.

Platinum-based neural electrodes frequently alloyed with Ir or W are routinely used for the treatment of neurological conditions. However, their performance is hampered by impaired electrical contact between electrode and tissue that compromises long-term implant stability. Though there are multiple coating techniques available to address this issue, electrode, and base material often exhibit a compositional mismatch, which impairs mechanical stability and may lead to toxicological side effects. In this work we coated Pt wire electrodes with ligand-free electrostatically stabilized colloidal Pt90Ir10, Pt90W10, and Pt50W50 alloy nanoparticles (NPs) matching electrode compositions using electrophoretic deposition (EPD) with direct-current (DC) and pulsed-DC fields in aqueous medium. The generated alloy NPs exhibit a solid solution structure as evidenced by HR-TEM-EDX and XRD, though additional WOx phases were identified in the Pt50W50 samples. Consequently, coating efficiency was also impaired in the presence of high W mass fractions in the alloy NPs. Characterization of the NP coatings by cyclic voltammetry and impedance spectroscopy yielded a significant reduction of the impedance in the Pt90Ir10 sample in comparison to the Pt control. The electrochemical surface area (ECSA) of the PtW alloy coatings, on the other hand, was significantly reduced.

Photomechanical Laser Fragmentation of IrO2 Microparticles for the Synthesis of Active and Redox-Sensitive Colloidal Nanoclusters.

Pulsed laser fragmentation of microparticles (MPs) in liquid is a synthesis method for producing high-purity nanoparticles (NPs) from virtually any material. Compared with laser ablation in liquids (LAL), the use of MPs enables a fully continuous, single-step synthesis of colloidal NPs. Although having been employed in several studies, neither the fragmentation mechanism nor the efficiency or scalability have been described. Starting from time-resolved investigations of the single-pulse fragmentation of single IrO2 MPs in water, the contribution of stress-mediated processes to the fragmentation mechanism is highlighted. Single-pulse, multiparticle fragmentation is then performed in a continuously operated liquid jet. Here, 2 nm-sized nanoclusters (NCs) accompanied by larger fragments with sizes ranging between several ten nm and several µm are generated. For the nanosized product, an unprecedented efficiency of up to 18 µg J-1 is reached, which exceeds comparable values reported for high-power LAL by one order of magnitude. The generated NCs exhibit high catalytic activity and stability in oxygen evolution reactions while simultaneously expressing a redox-sensitive fluorescence, thus rendering them promising candidates in electrocatalytic sensing. The provided insights will pave the way for laser fragmentation of MPs to become a versatile, scalable yet simple technique for nanomaterial design and development.

Surface Chemistry and Specific Surface Area Rule the Efficiency of Gold Nanoparticle Sensitizers in Proton Therapy.

Gold nanoparticles (AuNPs) are currently the most studied radiosensitizers in proton therapy (PT) applicable for the treatment of solid tumors, where they amplify production of reactive oxygen species (ROS). However, it is underexplored how this amplification is correlated with the AuNPs' surface chemistry. To clarify this issue, we fabricated ligand-free AuNPs of different mean diameters by laser ablation in liquids (LAL) and laser fragmentation in liquids (LFL) and irradiated them with clinically relevant proton fields by using water phantoms. ROS generation was monitored by the fluorescent dye 7-OH-coumarin. Our findings reveal an enhancement of ROS production driven by I) increased total particle surface area, II) utilization of ligand-free AuNPs avoiding sodium citrate as a radical quencher ligands, and III) a higher density of structural defects generated by LFL synthesis, indicated by surface charge density. Based on these findings it may be concluded that the surface chemistry is a major and underexplored contributor to ROS generation and sensitizing effects of AuNPs in PT. We further highlight the applicability of AuNPs in vitro in human medulloblastoma cells.

Impact of Chemical and Physical Properties of Organic Solvents on the Gas and Hydrogen Formation during Laser Synthesis of Gold Nanoparticles.

Laser ablation in liquids has been established as a scalable preparation method of nanoparticles for various applications. Particularly for materials prone to oxidation, it is established to suppress oxidation by using organic solvents as a liquid medium. While this often functionalizes the nanoparticles with a carbon shell, the related chemical processes that result from laser-induced decomposition reactions of the organic solvents remain uncertain. Using a systematic series of C6 solvents complemented by n-pentane and n-heptane during the nanosecond laser ablation of gold, the present study focuses on the solvent-dependent influence on gas formation rates, nanoparticle productivity, and gas composition. Both the permanent gas and hydrogen formation was found to be linearly correlated with ablation rate, ΔHvap , and pyrolysis activation energy. Based on this, a decomposition pathway linked to pyrolysis is proposed allowing the deduction of first selection rules for solvents that influence the formation of carbon or permanent gases.

Disproportional surface segregation in ligand-free gold-silver alloy solid solution nanoparticles, and its implication for catalysis and biomedicine.

Catalytic activity and toxicity of mixed-metal nanoparticles have been shown to correlate and are known to be dependent on surface composition. The surface chemistry of the fully inorganic, ligand-free silver-gold alloy nanoparticle molar fraction series, is highly interesting for applications in heterogeneous catalysis, which is determined by active surface sites which are also relevant for understanding their dissolution behavior in biomedically-relevant ion-release scenarios. However, such information has never been systematically obtained for colloidal nanoparticles without organic surface ligands and has to date, not been analyzed in a surface-normalized manner to exclude density effects. For this, we used detailed electrochemical measurements based on cyclic voltammetry to systematically analyze the redox chemistry of particle-surface-normalized gold-silver alloy nanoparticles with varying gold molar fractions. The study addressed a broad range of gold molar fractions (Ag90Au10, Ag80Au20, Ag70Au30, Ag50Au50, Ag40Au60, and Ag20Au80) as well as monometallic Ag and Au nanoparticle controls. Oxygen reduction reaction (ORR) measurements in O2 saturated 0.1 M KOH revealed a linear reduction of the overpotential with increasing gold content on the surface, probably attributed to the higher ORR activity of gold over silver, verified by monometallic Ag and Au controls. These findings were complemented by detailed XPS studies revealing an accumulation of the minor constituent of the alloy on the surface, e.g., silver surface enrichment in gold-rich particles. Furthermore, highly oxidized Ag surface site enrichment was detected after the ORR reaction, most pronounced in gold-rich alloys. Further, detailed CV studies at acidic pH, analyzing the position, onset potential, and peak integrals of silver oxidation and silver reduction peaks revealed particularly low reactivity and high chemical stability of the equimolar Au50Ag50 composition, a phenomenon attributed to the outstanding thermodynamic, entropically driven, stabilization arising at this composition.

Differentiating between Acidic and Basic Surface Hydroxyls on Metal Oxides by Fluoride Substitution: A Case Study on Blue TiO2 from Laser Defect Engineering.

Both oxygen vacancies and surface hydroxyls play a crucial role in catalysis. Yet, their relationship is not often explored. Herein, we prepare two series of TiO2 (rutile and P25) with increasing oxygen deficiency and Ti3+ concentration by pulsed laser defect engineering in liquid (PUDEL), and selectively quantify the acidic and basic surface OH by fluoride substitution. As indicated by EPR spectroscopy, the laser-generated Ti3+ exist near the surface of rutile, but appear to be deeper in the bulk for P25. Fluoride substitution shows that extra acidic bridging OH are selectively created on rutile, while the surface OH density remains constant for P25. These observations suggest near-surface Ti3+ are highly related to surface bridging OH, presumably the former increasing the electron density of the bridging oxygen to form more of the latter. We anticipate that fluoride substitution will enable better characterization of surface OH and its correlation with defects in metal oxides.

Enhancement of Proton Therapy Efficiency by Noble Metal Nanoparticles Is Driven by the Number and Chemical Activity of Surface Atoms.

Proton-based radiotherapy is a modern technique for the treatment of solid tumors with significantly reduced side effects to adjacent tissues. Biocompatible nanoparticles (NPs) with high atomic numbers are known to serve as sensitizers and to enhance treatment efficacy, which is commonly believed to be attributed to the generation of reactive oxygen species (ROS). However, little systematic knowledge is available on how either physical effects due to secondary electron generation or the particle surface chemistry affect ROS production. Thereto, ligand-free colloidal platinum (Pt) and gold (Au) NPs with well-controlled particle size distributions and defined total surface area are proton-irradiated. A fluorescence-based assay is developed to monitor the formation of ROS using terephthalic acid as a cross-effect-free dye. The findings indicate that proton irradiation (PI)-induced ROS formation sensitized by noble metal NPs is driven by the total available particle surface area rather than particle size or mass. Furthermore, a distinctive material effect with Pt being more active than Au is observed which clearly indicates that the chemical reactivity of the NP surface is a main contributor to ROS generation upon PI. These results pave the way towards an in-depth understanding of the NP-induced sensitizing effects upon PI and hence a well-controlled enhanced therapy.

Influence of Pt Alloying on the Fluorescence of Fully Inorganic, Colloidal Gold Nanoclusters.

Noble metal alloy nanoclusters (NCs) are interesting systems as the properties of two or more elements can be combined in one particle, leading to interesting fluorescence phenomena. However, previous studies have been exclusively performed on ligand-capped NCs from wet chemical synthesis. This makes it difficult to differentiate to which extent the fluorescence is affected by ligand-induced effects or the elemental composition of the metal core. In this work, we used laser fragmentation in liquids (LFL) to fabricate colloidal gold-rich bi-metallic AuPt NCs in the absence of organic ligands and demonstrate the suitability of this technique to produce molar fraction series of 1nm alloy NC. We found that photoluminescence of ligand-free NCs is not a phenomenon limited to Au. However, even minute amounts of Pt atoms in the AuPt NCs lead to quenching and red-shift of the fluorescence, which may be attributed to the altered surface charge density.

Impact of Sterilization on the Colloidal Stability of Ligand-Free Gold Nanoparticles for Biomedical Applications.

Sterilization is a major prerequisite for the utilization of nanoparticle colloids in biomedicine, a process well examined for particles derived from chemical synthesis although highly underexplored for electrostatically stabilized ligand-free gold nanoparticles (AuNPs). Hence, in this work, we comprehensively examined and compared the physicochemical characteristics of laser-generated ligand-free colloidal AuNPs exposed to steam sterilization and sterile filtration as a function of particle size and mass concentration and obtained physicochemical insight into particle growth processes. These particles exhibit long-term colloidal stability (up to 3 months) derived from electrostatic stabilization without using any ligands or surfactants. We show that particle growth attributed to cluster-based ripening occurs in smaller AuNPs (∼5 nm) following autoclaving, while larger particles (∼10 and ∼30 nm) remain stable. Sterile filtration, as an alternative effective sterilizing approach, has no substantial impact on the colloidal stability of AuNPs, regardless of particle size, although a mass loss of 5-10% is observed. Finally, we evaluated the impact of the sterilization procedures on potential particle functionality in proton therapy, using the formation of reactive oxygen species (ROS) as a readout. In particular, 5 nm AuNPs exhibit a significant loss in activity upon autoclaving, probably dedicated to specific surface area reduction and surface restructuring during particle growth. The filtered analog enhanced the ROS release by up to a factor of ∼2.0, at 30 ppm gold concentration. Our findings highlight the need for carefully adapting the sterilization procedure of ligand-free NPs to the desired biomedical application with special emphasis on particle size and concentration.

Impact of Ligands on Structural and Optical Properties of Ag29 Nanoclusters.

A ligand exchange strategy has been employed to understand the role of ligands on the structural and optical properties of atomically precise 29 atom silver nanoclusters (NCs). By ligand optimization, ∼44-fold quantum yield (QY) enhancement of Ag29(BDT)12-x(DHLA)x NCs (x = 1-6) was achieved, where BDT and DHLA refer to 1,3-benzene-dithiol and dihydrolipoic acid, respectively. High-resolution mass spectrometry was used to monitor ligand exchange, and structures of the different NCs were obtained through density functional theory (DFT). The DFT results from Ag29(BDT)11(DHLA) NCs were further experimentally verified through collisional cross-section (CCS) analysis using ion mobility mass spectrometry (IM MS). An excellent match in predicted CCS values and optical properties with the respective experimental data led to a likely structure of Ag29(DHLA)12 NCs consisting of an icosahedral core with an Ag16S24 shell. Combining the experimental observation with DFT structural analysis of a series of atomically precise NCs, Ag29-yAuy(BDT)12-x(DHLA)x (where y, x = 0,0; 0,1; 0,12 and 1,12; respectively), it was found that while the metal core is responsible for the origin of photoluminescence (PL), ligands play vital roles in determining their resultant PLQY.

Influence of Gold/Silver Ratio in Ablative Nanoparticles on Their Interaction with Aptamers and Functionality of the Obtained Conjugates.

Nano-bio-conjugates, featuring noble metal gold-silver alloy nanoparticles, represent a versatile tool in diagnostics and therapeutics due to their plasmonic and antimicrobial properties tunable by the particle's gold molar fraction. However, little is known about how the binding of thiolated biomolecules to noble metal nanoparticles is influenced by the fraction of gold and silver atoms on the nanoparticle's surface and to which extend this would affect the functionality of the conjugated biomolecules. In this work, we generated gold-silver alloy nanoparticles with average diameters of 7-8 nm using the modern, surfactant-free laser ablation in liquids (LAL) synthesis approach. We conjugated them with thiolated miniStrep aptamer ligands at well-controlled aptamer-to-nanoparticle surface area ratios with maxima between 12 and 27 pmol aptamer/cm2 particle surface area. The results revealed a clear correlation between surface coverage and the nanoparticles' nominal gold/silver ratio, with maximum coverage reached for gold-rich alloys and a pronounced maximum for silver-rich alloys. However, the conjugates' functionality, evaluated by binding of streptavidin, was surprisingly robust and hardly affected by the nominal composition. However, 1.5 times higher surface coverage was needed to obtain maximum functionality in the silver-rich conjugates. Based on these results, it may be concluded that the nominal composition of gold-silver alloy nano-bioconjugates is freely tunable without a pronounced impact on the attached ligands' functionality, a finding highly relevant for the flexible design of nano-bio-conjugates for future biomedical applications. This study's results may facilitate the design of alloy nano-bio-conjugates for future applications in therapeutics and diagnostics.

How the Physicochemical Properties of the Bulk Material Affect the Ablation Crater Profile, Mass Balance, and Bubble Dynamics During Single-Pulse, Nanosecond Laser Ablation in Water.

Understanding the key steps that drive the laser-based synthesis of colloids is a prerequisite for learning how to optimize the ablation process in terms of nanoparticle output and functional design of the nanomaterials. Even though many studies focus on cavitation bubble formation using single-pulse ablation conditions, the ablation efficiency and nanoparticle properties are typically investigated under prolonged ablation conditions with repetition rate lasers. Linking single-pulse and multiple-pulse ablation is difficult due to limitations induced by gas formation cross-effects, which occur on longer timescales and depend on the target materials' oxidation-sensitivity. Therefore, this study investigates the ablation and cavitation bubble dynamics under nanosecond, single laser pulse conditions for six different bulk materials (Au, Ag, Cu, Fe, Ti, and Al). Also, the effective threshold fluences, ablation volumes, and penetration depths are quantified for these materials. The thermal and chemical properties of the corresponding bulk materials not only favor the formation of larger spot sizes but also lead to the highest molar ablation efficiencies for low melting materials such as aluminum. Furthermore, the concept of the cavitation bubble growth linked with the oxidation sensitivity of the ablated material is discussed. With this, evidence is provided that intensive chemical reactions occurring during the very early timescale of ablation are significantly enhanced by the bubble collapse.

Comparing Direct and Pulsed-Direct Current Electrophoretic Deposition on Neural Electrodes: Deposition Mechanism and Functional Influence.

Electrophoretic deposition (EPD) of platinum nanoparticles (PtNPs) on platinum-iridium (Pt-Ir) neural electrode surfaces is a promising strategy to tune the impedance of electrodes implanted for deep brain stimulation in various neurological disorders such as advanced Parkinson's disease and dystonia. However, previous results are contradicting as impedance reduction was observed on flat samples while in three-dimensional (3D) structures, an increase in impedance was observed. Hence, defined correlations between coating properties and impedance are to date not fully understood. In this work, the influence of direct current (DC) and pulsed-DC electric fields on NP deposition is systematically compared and clear correlations between surface coating homogeneity and in vitro impedance are established. The ligand-free NPs were synthesized via pulsed laser processing in liquid, yielding monomodal particle size distributions, verified by analytical disk centrifugation (ADC). Deposits formed were quantified by UV-vis supernatant analysis and further characterized by scanning electron microscopy (SEM) with semiautomated interparticle distance analyses. Our findings reveal that pulsed-DC electric fields yield more ordered surface coatings with a lower abundance of particle assemblates, while DC fields produce coatings with more pronounced aggregation. Impedance measurements further highlight that impedance of the corresponding electrodes is significantly reduced in the case of more ordered coatings realized by pulsed-DC depositions. We attribute this phenomenon to the higher active surface area of the adsorbed NPs in homogeneous coatings and the reduced particle-electrode electrical contact in NP assemblates. These results provide insight for the efficient EPD of bare metal NPs on micron-sized surfaces for biomedical applications in neuroscience and correlate coating homogeneity with in vitro functionality.

Design and perspective of amorphous metal nanoparticles from laser synthesis and processing.

Amorphous metal nanoparticles (A-NPs) have aroused great interest in their structural disordering nature and combined downsizing strategies (e.g. nanoscaling), both of which are beneficial for highly strengthened properties compared to their crystalline counterparts. Conventional synthesis strategies easily induce product contamination and/or size limitations, which largely narrow their applications. In recent years, laser ablation in liquid (LAL) and laser fragmentation in liquid (LFL) as "green" and scalable colloid synthesis methodologies have attracted extensive enthusiasm in the production of ultrapure crystalline NPs, while they also show promising potential for the production of A-NPs. Yet, the amorphization in such methods still lacks sufficient rules to follow regarding the formation mechanism and criteria. To that end, this article reviews amorphous metal oxide and carbide NPs from LAL and LFL in terms of NP types, liquid selection, target elements, laser parameters, and possible formation mechanism, all of which play a significant role in the competitive relationship between amorphization and crystallization. Furthermore, we provide the prospect of laser-generated metallic glass nanoparticles (MG-NPs) from MG targets. The current and potential applications of A-NPs are also discussed, categorized by the attractive application fields e.g. in catalysis and magnetism. The present work aims to give possible selection rules and perspective on the design of colloidal A-NPs as well as the synthesis criteria of MG-NPs from laser-based strategies.

Picosecond laser-induced surface structures on alloys in liquids and their influence on nanoparticle productivity during laser ablation.

The productivity of nanoparticles formed by laser ablation of gold-silver and iron-gold alloy as well as copper and iron-nickel alloy targets in water is correlated with the formation of laser-induced surface structures. At a laser fluence optimized for maximum nanoparticle productivity, it is found that a binary alloy with an equimolar ratio forms laser-induced periodic surface structures (LIPSS) after ablation, if one of the constituent metals also form LIPSS. The ablation rate of nanoparticles linearly depends on the laser fluence if LIPSS is not formed, while a logarithmic trend and a decrease in productivity is evident when LIPSS is formed. To cancel LIPSS formation and recover from this decrease, a change to circularly polarized light is performed and an increase in nanoparticle productivity of more than 30% is observed.

Room-Temperature Laser Synthesis in Liquid of Oxide, Metal-Oxide Core-Shells, and Doped Oxide Nanoparticles.

Although oxide nanoparticles are ubiquitous in science and technology, a multitude of compositions, phases, structures, and doping levels exist, each one requiring a variety of conditions for their synthesis and modification. Besides, experimental procedures are frequently dominated by high temperatures or pressures and by chemical contaminants or waste. In recent years, laser synthesis of colloids emerged as a versatile approach to access a library of clean oxide nanoparticles relying on only four main strategies running at room temperature and ambient pressure: laser ablation in liquid, laser fragmentation in liquid, laser melting in liquid and laser defect-engineering in liquid. Here, established laser-based methodologies are reviewed through the presentation of a panorama of oxide nanoparticles which include pure oxidic phases, as well as unconventional structures like defective or doped oxides, non-equilibrium compounds, metal-oxide core-shells and other anisotropic morphologies. So far, these materials showed several useful properties that are discussed with special emphasis on catalytic, biomedical and optical application. Yet, given the endless number of mixed compounds accessible by the laser-assisted methodologies, there is still a lot of room to expand the library of nano-crystals and to refine the control over products as well as to improve the understanding of the whole process of nanoparticle formation. To that end, this review aims to identify the perspectives and unique opportunities of laser-based synthesis and processing of colloids for future studies of oxide nanomaterial-oriented sciences.

Matrix-specific mechanism of Fe ion release from laser-generated 3D-printable nanoparticle-polymer composites and their protein adsorption properties.

Nanocomposites have been widely applied in medical device fabrication and tissue-engineering applications. In this context, the release of metal ions as well as protein adsorption capacity are hypothesized to be two key processes directing nanocomposite-cell interactions. The objective of this study is to understand the polymer-matrix effects on ion release kinetics and their relations with protein adsorption. Laser ablation in macromolecule solutions was employed for synthesizing Au and Fe nanoparticle-loaded nanocomposites based on thermoplastic polyurethane (TPU) and alginate. Confocal microscopy revealed a three-dimensional homogeneous dispersion of laser-generated nanoparticles in the polymer. The physicochemical properties revealed a pronounced dependence upon embedding of Fe and Au nanoparticles in both polymer matrices. Interestingly, the total Fe ion concentration released from alginate gels under static conditions decreased with increasing mass loadings, a phenomenon only found in the Fe-alginate system and not in the Cu/Zn-alginate and Fe-TPU control system (where the effects were proportioonal to the nanoparticle load). A detailed mechanistic examination of iron the ion release process revealed that it is probably not the redox potential of metals and diffusion of metal ions alone, but also the solubility of nano-metal oxides and affinity of metal ions for alginate that lead to the special release behaviors of iron ions from alginate gels. The amount of adsorbed bovine serum albumin (BSA) and collagen I on the surface of both the alginate and TPU composites was significantly increased in contrast to the unloaded control polymers and could be correlated with the concentration of released Fe ions and the porosity of composites, but was independent of the global surface charge. Interestingly, these effects were already highly pronounced at minute loadings with Fe nanoparticles down to 200 ppm. Moreover, the laser-generated Fe or Au nanoparticle-loaded alginate composites were shown to be a suitable bioink for 3D printing. These findings are potentially relevant for ion-sensitive bio-responses in cell differentiation, endothelisation, vascularisation, or wound healing.

Effective size separation of laser-generated, surfactant-free nanoparticles by continuous centrifugation.

High-power, nanosecond, pulsed-laser ablation in liquids enables the continuous synthesis of highly pure colloidal nanoparticles (NPs) at an application-relevant scale. The gained mass-weighted particle size distribution is however often reported to be broad, requiring post treatment like centrifugation to remove undesired particle size fractions. To date, available centrifugation techniques are generally discontinuous, limiting the throughput and hindering economic upscaling. Hence, throughout this paper, a scalable, continuously operating centrifugation of laser-generated platinum NPs in a tubular bowl centrifuge is reported for the first time. To that end, using a 121 W ns-laser, the continuous production of a colloidal suspension of NPs, yet with broad particle size distribution has been employed, yielding productivities of 1-2 g h-1 for gold, silver, and platinum. The power-specific productivities (Au: 18 mg h-1 W-1, Pt: 13 mg h-1 W-1, Ag: 8 mg h-1 W-1, Ni: 6 mg h-1 W-1) are far higher than reported before. Subsequent downstream integration of a continuously operating tubular bowl centrifuge was successfully achieved for Pt NPs allowing the removal of undesired particle size with high throughput. By means of a systematic study of relevant centrifugation parameters involved, effective size optimization and respective size sharpness parameters for a maximum Pt NP diameter of 10 nm are reported. The results of the experimental centrifugation of laser-generated Pt NPs were in excellent agreement with the theoretically calculated cut-off diameter. After centrifugation with optimized parameters (residence time of 5 min; g-force of 38,454 g), the polydispersity indices of the Pt NPs size distributions were reduced by a factor of six, and high monodispersity was observed.

Continuous-Flow Flat Jet Setup for Uniform Pulsed Laser Postprocessing of Colloids.

Pulsed laser postprocessing (PLPP) of colloidal nanoparticles and related laser fragmentation in liquid (LFL) using a liquid jet setup have become an acknowledged tool to reduce the nanoparticle diameter down to a few nanometers, alter the crystal phase, or increase the defect density under high-purity and continuous-flow conditions. In recent studies on LFL that were conducted with a cylindrical liquid jet, intensity gradients and related incomplete illumination of the volume element passing through the laser beam path were reported to cause a broadening of the product particle size distribution, melting, and phase segregation. In this paper, we present a new flat jet design, which reduces the deviation of the laser intensity up to 10 times compared to the conventional cylindrical liquid jet. The experimental threshold intensity for gold nanoparticle fragmentation found with the cylindrical setup strongly deviates from the theoretical prediction, while they are in very good agreement for the flat jet setup. Additionally, a narrow product size fraction of 3 ± 2 nm was found for the flat jet, while the main product fraction gained from the cylindrical jet was 10 ± 8 nm in size under the same conditions. Consequently, the flat jet setup allows us not only to study laser fragmentation mechanisms with higher precision but also to gain product particles with narrow particle size distribution at single pulse per particle conditions even at elevated mass concentrations (>50 mg L-1). In future studies, these promising results also render the flat jet setup relevant for the other disciplines of PLPP such as laser melting and defect engineering.

Manipulation of the Size and Phase Composition of Yttrium Iron Garnet Nanoparticles by Pulsed Laser Post-Processing in Liquid.

Modification of the size and phase composition of magnetic oxide nanomaterials dispersed in liquids by laser synthesis and processing of colloids has high implications for applications in biomedicine, catalysis and for nanoparticle-polymer composites. Controlling these properties for ternary oxides, however, is challenging with typical additives like salts and ligands and can lead to unwanted byproducts and various phases. In our study, we demonstrate how additive-free pulsed laser post-processing (LPP) of colloidal yttrium iron oxide nanoparticles using high repetition rates and power at 355 nm laser wavelength can be used for phase transformation and phase purification of the garnet structure by variation of the laser fluence as well as the applied energy dose. Furthermore, LPP allows particle size modification between 5 nm (ps laser) and 20 nm (ns laser) and significant increase of the monodispersity. Resulting colloidal nanoparticles are investigated regarding their size, structure and temperature-dependent magnetic properties.