Recent advances in visible light-activated photocatalysts for degradation of dyes: A comprehensive review.

The rapid development in industrialization and urbanization coupled with an ever-increasing world population has caused a tremendous increase in contamination of water resources globally. Synthetic dyes have emerged as a major contributor to environmental pollution due to their release in large quantities into the environment, especially owing to their high demand in textile, cosmetics, clothing, food, paper, rubber, printing, and plastic industries. Photocatalytic treatment technology has gained immense research attention for dye contaminated wastewater treatment due to its environment-friendliness, ability to completely degrade dye molecules using light irradiation, high efficiency, and no generation of secondary waste. Photocatalytic technology is evolving rapidly, and the foremost goal is to synthesize highly efficient photocatalysts with solar energy harvesting abilities. The current review provides a comprehensive overview of the most recent advances in highly efficient visible light-activated photocatalysts for dye degradation, including methods of synthesis, strategies for improving photocatalytic activity, regeneration and their performance in real industrial effluent. The influence of various operational parameters on photocatalytic activity are critically evaluated in this article. Finally, this review briefly discusses the current challenges and prospects of visible-light driven photocatalysts. This review serves as a convenient and comprehensive resource for comparing and studying the fundamentals and recent advancements in visible light photocatalysts and will facilitate further research in this direction.

Tuning nanofiltration membrane performance: OH-MoS2 nanosheet engineering and divalent cation influence on fouling and organic removal.

Natural organic matter (NOM) present in surface water causes severe organic fouling of nanofiltration (NF) membranes employed for the production of potable water. Calcium (Ca2+) and magnesium (Mg2+) are alkaline earth metals present in natural surface water and severely exacerbate organic fouling owing to their ability to cause charge neutralization, complexation, and bridging of NOM and the membrane surface. Hence, it is of practical significance to engineer membranes with properties suitable for addressing organic fouling in the presence of these cations. This study employed OH-functionalized molybdenum disulphide (OH-MoS2) nanosheets as nanofillers via the interfacial polymerization reaction to engineer NF membranes for enhanced removal of NOM and fouling mitigation performance. At an optimized concentration of 0.010 wt.% of OH-MoS2 nanosheet, the membrane was endowed with higher hydrophilicity, negative charge and rougher membrane morphology which enhanced the pure water permeance by 46.33% from 11.2 to 16.39 L m-2 h-1 bar-1 while bridging the trade-off between permeance and salt selectivity. The fouling performance was evaluated using humic acid (HA) and sodium alginate (SA), which represent the hydrophobic and hydrophilic components of NOM in the presence of 0, 0.5, and 1 mM Ca2+ and Mg2+, respectively, and the performance was benchmarked with control and commercial membranes. The modified membrane exhibited normalized fluxes of 95.09% and 93.26% for HA and SA, respectively, at the end of the 6 h filtration experiments, compared to the control membrane at 89.71% and 74.25%, respectively. This study also revealed that Ca2+ has a more detrimental effect than Mg2+ on organic fouling and NOM removal. The engineered membrane outperformed the commercial and the pristine membranes during fouling tests in the presence of 1 mM Ca2+ and Mg2+ in the feed solution. In summary, this study has shown that incorporating OH-MoS2 nanosheets into membranes is a promising strategy for producing potable water from alternative water sources with high salt and NOM contents.

Removal of natural organic matter from surface water sources by nanofiltration and surface engineering membranes for fouling mitigation - A review.

Given that surface water is the primary supply of drinking water worldwide, the presence of natural organic matter (NOM) in surface water presents difficulties for water treatment facilities. During the disinfection phase of the drinking water treatment process, NOM aids in the creation of toxic disinfection by-products (DBPs). This problem can be effectively solved using the nanofiltration (NF) membrane method, however NOM can significantly foul NF membranes, degrading separation performance and membrane integrity, necessitating the development of fouling-resistant membranes. This review offers a thorough analysis of the removal of NOM by NF along with insights into the operation, mechanisms, fouling, and its controlling variables. In light of engineering materials with distinctive features, the potential of surface-engineered NF membranes is here critically assessed for the impact on the membrane surface, separation, and antifouling qualities. Case studies on surface-engineered NF membranes are critically evaluated, and properties-to-performance connections are established, as well as challenges, trends, and predictions for the field's future. The effect of alteration on surface properties, interactions with solutes and foulants, and applications in water treatment are all examined in detail. Engineered NF membranes containing zwitterionic polymers have the greatest potential to improve membrane permeance, selectivity, stability, and antifouling performance. To support commercial applications, however, difficulties related to material production, modification techniques, and long-term stability must be solved promptly. Fouling resistant NF membrane development would be critical not only for the water treatment industry, but also for a wide range of developing applications in gas and liquid separations.

Model development and parameter estimation for a hybrid submerged membrane bioreactor treating Ametryn.

A lab-scale membrane bioreactor (MBR) was used to remove Ametryn from synthetic wastewater. It was found that concentrations of MLSS and extra-cellular polymeric substances (EPS) in MBR mixed liquor fluctuated (production and decay) differently for about 40 days (transition period) after the introduction of Ametryn. During the subsequent operations with higher organic loading rates, it was also found that a low net biomass yield (higher death rate) and a higher rate of fouling of membrane (a very high rate during the first 48 h) due to increased levels of bound EPS (eEPS) in MBR mixed liquor. A mathematical model was developed to estimate the kinetic parameters before and after the introduction of Ametryn. This model will be useful in simulating the performance of a MBR treating Ametryn in terms of flux, rate of fouling (in terms of transmembrane pressure and membrane resistance) as well as treatment efficiency.

Impact of herbicide Ametryn on microbial communities in mixed liquor of a membrane bioreactor (MBR).

Ametryn, which is a second generation herbicide, was introduced to a lab-scale MBR at a concentration of 1mg/L and a 20-40% removal was observed at HRT ranging from 7.8 to 15.6h for an average influent Ametryn concentration of 0.8 mg/L. Components of EPS (protein and carbohydrates) increased in the bioreactor and the observed biomass production reduced after the addition of Ametryn. In a batch study, GAC was added to MBR mixed liquor and removal of Ametryn via biodegradation and adsorption were measured. Five common bacterial colony types (Gram negative and positive bacilli and Gram negative cocci) were identified and three of these were resistant to Ametryn up to 5mg/L. GAC was found to be a very effective Ametryn adsorption medium and in some occasions Ametryn may have acted as a nutrient source for bacteria.