RESUMO
Mixed-anion compounds widen the chemical space of attainable materials compared to single anionic compounds, but the exploration of their structural diversity is limited by common synthetic paths. Especially, oxychlorides rely mainly on layered structures, which suffer from low stability during photo(electro)catalytic processes. Herein we report a strategy to design a new polar 3D tetrahedral framework with composition Zn4 Si2 O7 Cl2 . We use a molten salt medium to enable low temperature crystallization of nanowires of this new compound, by relying on tetrahedral building units present in the melt to build the connectivity of the oxychloride. These units are combined with silicon-based connectors from a non-oxidic Zintl phase to enable precise tuning of the oxygen content. This structure brings high chemical and thermal stability, as well as strongly anisotropic hole mobility along the polar axis. These features, associated with the ability to adjust the transport properties by doping, enable to tune water splitting properties for photoelectrocatalytic H2 evolution and water oxidation. This work then paves the way to a new family of mixed-anion solids.
Assuntos
Nanoestruturas , Cloreto de Sódio/química , Ânions/química , Nanoestruturas/química , Zinco/química , Dióxido de Silício/química , Cloretos/química , Catálise , Eletroquímica/métodosRESUMO
Au nanoparticles (NPs) characterized by distinct surface chemistry (including dodecanethiol or oleylamine as capping agent), different sizes (â¼5 and â¼10 nm) and crystallinities (polycrystalline or single crystalline), were chosen as seeds to demonstrate the versatility and robustness of our two-step core-shell Au@Ag NP synthesis process. The central component of this strategy is to solubilize the shell precursor (AgNO3) in oleylamine and to induce the growth of the shell on selected seeds under heating. The shell thickness is thus controlled by the temperature, the annealing time, the (shell precursor)/(seed) concentration ratio, seed size and crystallinity. The shell thickness is thus shown to increase with the reactant concentration and to grow faster on polycrystalline seeds. The crystalline structure and chemical composition were characterized by HRTEM, STEM-HAADF, EELS and Raman spectroscopy. The plasmonic response of Au@Ag core-shell NPs as a function of core size and shell thickness was assessed by spectrophotometry and simulated by calculations based on the discrete dipole approximation (DDA) method. Finally, the nearly monodisperse core-shell Au@Ag NPs were shown to form micrometer-scale facetted 3D fcc-ordered superlattices (SLs) after solvent evaporation and deposition on a solid substrate. These SLs are promising candidates for applications as a tunable surface-enhanced Raman scattering platform.
RESUMO
The influence of the macromolecular reversible addition-fragmentation chain transfer (macro-RAFT) agent architecture on the morphology of the self-assemblies obtained by aqueous RAFT dispersion polymerization in polymerization-induced self-assembly (PISA) is studied by comparing amphiphilic AB diblock, (AB)2 triblock, and triarm star-shaped (AB)3 copolymers, constituted of N,N-dimethylacrylamide (DMAc = A) and diacetone acrylamide (DAAm = B). Symmetrical triarm (AB)3 copolymers could be synthesized for the first time in a PISA process. Spheres and higher order morphologies, such as worms or vesicles, could be obtained for all types of architectures and the parameters that determine their formation have been studied. In particular, we found that the total DPn of the PDMAc and the PDAAm segments, i.e., the same overall molar mass, at the same Mn (PDMAc)/Mn (PDAAm) ratio, rather than the individual length of the arms determined the morphologies for the linear (AB)2 and star shaped (AB)3 copolymers obtained by using the bi- and trifunctional macro-RAFT agents.
Assuntos
Acrilamidas/química , Técnicas de Química Sintética/métodos , Polimerização , Polímeros/química , Água/química , Microscopia Eletrônica de Transmissão , Modelos Químicos , Estrutura Molecular , Peso Molecular , Polímeros/síntese químicaRESUMO
Visible-light-responsive photocatalysts can directly harvest energy from solar light, offering a desirable way to solve energy and environment issues. Here, we show that one-dimensional poly(diphenylbutadiyne) nanostructures synthesized by photopolymerization using a soft templating approach have high photocatalytic activity under visible light without the assistance of sacrificial reagents or precious metal co-catalysts. These polymer nanostructures are very stable even after repeated cycling. Transmission electron microscopy and nanoscale infrared characterizations reveal that the morphology and structure of the polymer nanostructures remain unchanged after many photocatalytic cycles. These stable and cheap polymer nanofibres are easy to process and can be reused without appreciable loss of activity. Our findings may help the development of semiconducting-based polymers for applications in self-cleaning surfaces, hydrogen generation and photovoltaics.
RESUMO
Herein we highlight for the first time the ability to tune the stoichiometry of metal boride nanocrystals through nanoparticle synthesis in thermally stable inorganic molten salts. Two metal-boron systems are chosen as case studies: boron-poor nickel borides and boron-rich yttrium borides. We show that NiB, Ni4B3, Ni2B, Ni3B, and YB6 particles can be obtained as crystalline phases with good selectivity. Anisotropic crystallization is observed in two cases: the first boron-rich YB4 nanorods are reported, while boron-poor NiB nanoparticles show a peculiar crystal habit, as they are obtained as spheres with uniaxial defects related to the crystal structure. Crystallization mechanisms are proposed to account for the appearance of these two kinds of anisotropy at the nanoscale.
RESUMO
Mesoporous silica monoliths with various ordered nanostructures containing transition metal M(2+) cations in variable amounts were elaborated and studied. A phase diagram depicting the different phases as a function of the M(2+) salt/tetramethyl orthosilicate (TMOS) and surfactant P123/TMOS ratios was established. Thermal treatment resulted in mesoporous monoliths containing isolated, accessible M(2+) species or condensed metal oxides, hydroxides, and salts, depending on the strength of the interactions between the metal species and the ethylene oxide units of P123. The ordered mesoporosity of the monoliths containing accessible M(2+) ions was used as a nanoreactor for the elaboration of various transition metal compounds (Prussian blue analogues, Hofmann compounds, metal-organic frameworks), and this opens the way to the elaboration of a large range of nanoparticles of multifunctional materials.
RESUMO
Magnetic cobalt ferrite/silica microparticles having both an original morphology and an anisotropic nanostructure are synthesized through the use of an external magnetic field and nanoparticles characterized by a high magnetic anisotropy. The association of these two factors implies that the ESE (emulsion and solvent evaporation) sol-gel method employed here allows the preparation of silica microellipsoids containing magnetic nanoparticles aggregated in large chains. It is clearly shown that without this combination, microspheres characterized by an isotropic distribution of the magnetic nanoparticles are obtained. While the chaining of the cobalt ferrite nanoparticles inside the silica matrix is related to the increase of their magnetic dipolar interactions, the ellipsoidal shape of the microparticles may be explained by the elongation of the sol droplets in the direction of the external magnetic field during the synthesis. Because of their highly anisotropic structure, these microparticles exhibit permanent magnetic moments, which are responsible, at a larger scale, for the existence of strong magnetic dipolar interactions. Therefore, when they are dispersed in water, the microellipsoids self-assemble into large and irregular chains. These interactions can be reinforced by the use of external magnetic field, allowing the preparation of very large permanent chains. This research illustrates how nanostructured particles exhibiting complex architectures can be elaborated through simple, fast, and low-cost methods, such as the use of external fields in combination with soft chemistry.
RESUMO
Three different cholesterol derivatives and phloretin, known to affect the local electric field in phospholipid membranes, have been introduced into Rhodobacter sphaeroides reaction centre-containing phospholipid liposomes. We show that cholesterol and 6-ketocholestanol significantly slow down the interquinone first electron transfer (approximately 10 times), whereas phloretin and 5-cholesten-3beta-ol-7-one leave the kinetics essentially unchanged. Interestingly, the two former compounds have been shown to increase the dipole potential, whereas the two latter decrease it. We also measured in isolated RCs the rates of the electron and proton transfers at the first flash. Over the pH range 7-10.5 both reactions display biphasic behaviors with nearly superimposable rates and amplitudes, suggesting that the gating process limiting the first electron transfer is indeed the coupled proton entry. We therefore interpret the effects of cholesterol and 6-ketocholestanol as due to dipole concentration producing an increased free energy barrier for protons to enter the protein perpendicular to the membrane. We also report for the first time in R. sphaeroides RCs, at room temperature, a biphasicity of the P(+)Q(A)(-) charge recombination, induced by the presence of cholesterol derivatives in proteoliposomes. We propose that these molecules decrease the equilibration time between two RC conformations, therefore revealing their presence.
Assuntos
Fosfolipídeos/química , Complexo de Proteínas do Centro de Reação Fotossintética/química , Antraquinonas/química , Membrana Celular/química , Colesterol/análogos & derivados , Colesterol/química , Campos Eletromagnéticos , Transporte de Elétrons , Concentração de Íons de Hidrogênio , Cetocolesteróis/química , Cinética , Lipossomos/química , Microscopia Eletrônica de Transmissão , Modelos Moleculares , Floretina/química , Fosfatidilcolinas/química , Rhodobacter sphaeroides/química , Temperatura , TermodinâmicaRESUMO
The authors wish to make the following corrections to this paper [1]: there are two mistakes inthis article [1] [...].
RESUMO
Red luminescent and superparamagnetic ß-NaY0.8Eu0.2F4@γ-Fe2O3 nanoparticles, made of a 70 nm-sized ß-NaY0.8Eu0.2F4 single crystal core decorated by a 10 nm-thick polycrystalline and discontinuous γ-Fe2O3 shell, have been synthesized by the polyol process. Functionalized with citrate ligands they show a good colloidal stability in water making them valuable for dual magnetic resonance and optical imaging or image-guided therapy. They exhibit a relatively high transverse relaxivity r2 = 42.3 mM-1·s-1 in water at 37 °C, for an applied static magnetic field of 1.41 T, close to the field of 1.5 T applied in clinics, as they exhibit a red emission by two-photon excited fluorescence microscopy. Finally, when brought into contact with healthy human foreskin fibroblast cells (BJH), for doses as high as 50 µg·mL-1 and incubation time as long as 72 h, they do not show evidence of any accurate cytotoxicity, highlighting their biomedical applicative potential.
RESUMO
An alternative route for metal hydrogenation has been investigated: cold plasma hydrogen implantation on polyol-made transition metal nanoparticles. This treatment applied to a challenging system, Ni-H, induces a re-ordering of the metal lattice, and superstructure lines have been observed by both Bragg-Brentano and grazing incidence X-ray diffraction. The resulting intermetallic structure is similar to those obtained by very high-pressure hydrogenation of nickel and prompt us to suggest that plasma-based hydrogen implantation in nanometals is likely to generate unusual metal hydride, opening new opportunities in chemisorption hydrogen storage. Typically, almost isotropic in shape and about 30 nm sized hexagonal-packed Ni2H single crystals were produced starting from similarly sized cubic face-centred Ni polycrystals.
RESUMO
Unsupported nanoparticles are now recognized as model catalysts to evaluate the intrinsic activity of metal particles, irrespectively of that of the support. Co nanoparticles with different morphologies, rods, diabolos and cubes have been prepared by the polyol process and tested for the acceptorless catalytic dehydrogenation of alcohols under solvent-free conditions. Rods crystallize with the pure hcp structure, diabolos with a mixture of hcp and fcc phases, while the cubes crystallize in a complex mixture of hcp, fcc and ε-Co phases. All the cobalt particles are found to be highly selective towards the oxidation of a model secondary alcohol, octan-2-ol, into the corresponding ketone while no significant activity is found with octan-1-ol. Our results show the strong influence of particle shape on the activity and catalytic stability of the catalysts: Co nanorods display the highest conversion (85%), selectivity (95%) and recyclability compared to Co diabolos and Co cubes. We correlate the nanorods excellent stability with a strong binding of carboxylate ligands on their {1 1 2¯ 0} facets, preserving their crystalline superficial structure, as evidenced by phase modulation infrared reflection absorption spectroscopy.
RESUMO
Engineering photocatalysts based on gold nanoparticles (AuNPs) has attracted great attention for the solar energy conversion due to their multiple and unique properties. However, boosting the photocatalytic performance of plasmonic materials for H2 generation has some limitations. In this study, we propose a soft-chemistry method for the preparation of a strong metal-support interaction (SMSI) to enhance the photocatalytic production of H2. The TiO2 thin overlayer covering finely dispersed AuNPs (forming an SMSI) boosts the photocatalytic generation of hydrogen, compared to AuNPs deposited at the surface of TiO2 (labelled as a classical system). The pathway of the charge carriers' dynamics regarding the system configuration is found to be different. The photogenerated electrons are collected by AuNPs in a classical system and act as an active site, while, unconventionally, they are injected back in the titania surface for an SMSI photocatalyst making the system highly efficient. Additionally, the adsorption energy of methanol, theoretically estimated using the density functional theory (DFT) methodology, is lower for the soft-chemistry SMSI photocatalyst accelerating the kinetics of photocatalytic hydrogen production. The SMSI obtained by soft-chemistry is an original concept for highly efficient photocatalytic materials, where the photon-to-energy conversion remains a major challenge.
RESUMO
Redox reactions are of great importance in environmental catalysis. Gold nanoparticles (Au-NPs) have attracted much attention because of their catalytic activity and their localized surface plasmon resonance (LSPR). In the present study, we investigated, in detail, the reduction of ferricyanide (III) ion into a ferrocyanide (II) ion catalyzed by spherical gold nanoparticles of two different sizes, 15 nm and 30 nm, and excited at their LSPR band. Experiments were conducted in the presence (or absence) of sodium thiosulfate. This catalysis is enhanced in the presence of Au- NPs under visible light excitation. This reduction also takes place even without sodium thiosulfate. Our results demonstrate the implication of hot electrons in this reduction.
RESUMO
Well dispersed and efficient Rh(0) hydrogenation catalysts were obtained by the reduction of Rh(III)-exchanged mesoporous aluminosilicates by sodium borohydride in the presence of N,N-dimethyl-N-cetyl-N-(2-hydroxyethyl) ammonium chloride.
RESUMO
Inorganic nanocomposites made of an inorganic matrix containing nanoparticle inclusions provide materials of advanced mechanical, magnetic, electrical properties and multifunctionality. The range of compounds that can be implemented in nanocomposites is still narrow and new preparation methods are required to design such advanced materials. Herein, we describe how the combination of nanocrystal synthesis in molten salts with subsequent heat treatment at a pressure in the GPa range gives access to a new family of boron-based nanocomposites. With the case studies of HfB2/ß-HfB2O5 and CaB6/CaB2O4(iv), we demonstrate by X-ray diffraction and through (scanning) transmission electron microscopy the crystallization of borate matrices into rare compounds and unique nanostructured solids, while metal boride nanocrystals remain dispersed in the matrix and maintain small sizes below 30 nm, thus demonstrating a new multidisciplinary approach toward nanoscaled heterostructures.
RESUMO
An expeditious synthesis of metal carbide nanoparticles onto various carbon supports is demonstrated. The procedure is versatile and readily yields TiC, VC, Mo2C and W2C nanoparticles on different types of carbons. The reaction is initiated at room temperature and proceeds within seconds. This novel synthetic route paves the way for a large variety of metal carbide-carbon nanocomposites that may be implemented in emerging nanotechnology fields.
RESUMO
An organotin-substituted Dawson-type phosphotungstate was covalently linked to a trithiocarbonate group by postfunctionalization methods. This organopolyoxometalate led to a series of polyoxometalate (POM)-poly(N,N-diethylacrylamide) hybrids in a controlled way through reversible addition-fragmentation chain transfer (RAFT) polymerization. Detailed comparison with and without the presence of POMs revealed that they do not profoundly disturb the RAFT mechanism, despite their oxidative power. The molar masses of the polymers were in the range of 10 to 100â kg mol-1 and molar mass dispersities of the composites were low (Mw /Mn <1.5). The POM building block in the hybrids retained the photocatalytic reactivity of the parent Dawson polyanion [P2 W18 O62 ]6- . Smaller, more homogeneous, and colloidally more stable silver nanoparticles were formed with the covalently linked POM-polymer compound than with its single unbound components.
RESUMO
The polyol process is one of the few methods allowing the preparation of metal nanoparticles in solution. Hexagonal close packed monocrystalline Co nanorods are easily obtained in basic 1,2-butanediol at 448 K after a few minutes using a Co(II) dicarboxylate precursor. By using a combined experimental and theoretical approach, this study aims at a better understanding of the growth of anisotropic cobalt ferromagnetic nanoparticles by the polyol process. The growth of Co nanorods along the c axis of the hexagonal system was clearly evidenced by transmission electron microscopy, while the mean diameter was found to be almost constant at about 15 nm. Powder X-ray diffraction data showed that metallic cobalt was generated at the expense of a non-reduced solid lamellar intermediate phase which can be considered as a carboxylate ligand reservoir. Density functional theory calculations combined with a thermodynamic approach unambiguously showed that the main parameter governing the shape of the objects is the chemical potential of the carboxylate ligand: the crystal habit was deeply modified from rods to platelets when increasing the concentration of the ligand, i.e. its chemical potential. The approach presented in this study could be extended to a large number of particle types and growth conditions, where ligands play a key role in determining the particle shape.