Two Lineages of KLRA with Contrasting Transcription Patterns Have Been Conserved at a Single Locus during Ruminant Speciation.

Cattle possess the most diverse repertoire of NK cell receptor genes among all mammals studied to date. Killer cell receptor genes encoded within the NK complex and killer cell Ig-like receptor genes encoded within the leukocyte receptor complex have both been expanded and diversified. Our previous studies identified two divergent and polymorphic KLRA alleles within the NK complex in the Holstein-Friesian breed of dairy cattle. By examining a much larger cohort and other ruminant species, we demonstrate the emergence and fixation of two KLRA allele lineages (KLRA*01 and -*02) at a single locus during ruminant speciation. Subsequent recombination events between these allele lineages have increased the frequency of KLRA*02 extracellular domains. KLRA*01 and KLRA*02 transcription levels contrasted in response to cytokine stimulation, whereas homozygous animals consistently transcribed higher levels of KLRA, regardless of the allele lineage. KLRA*02 mRNA levels were also generally higher than KLRA*01 Collectively, these data point toward alternative functional roles governed by KLRA genotype and allele lineage. On a background of high genetic diversity of NK cell receptor genes, this KLRA allele fixation points to fundamental and potentially differential function roles.

Microdiversity and temporal dynamics of marine bacterial dimethylsulfoniopropionate genes.

Dimethylsulfoniopropionate (DMSP) is an abundant organic sulfur metabolite produced by many phytoplankton species and degraded by bacteria via two distinct pathways with climate-relevant implications. We assessed the diversity and abundance of bacteria possessing these pathways in the context of phytoplankton community composition over a 3-week time period spanning September-October, 2014 in Monterey Bay, CA. The dmdA gene from the DMSP demethylation pathway dominated the DMSP gene pool and was harboured mostly by members of the alphaproteobacterial SAR11 clade and secondarily by the Roseobacter group, particularly during the second half of the study. Novel members of the DMSP-degrading community emerged from dmdA sequences recovered from metagenome assemblies and single-cell sequencing, including largely uncharacterized gammaproteobacteria and alphaproteobacteria taxa. In the DMSP cleavage pathway, the SAR11 gene dddK was the most abundant early in the study, but was supplanted by dddP over time. SAR11 members, especially those harbouring genes for both DMSP degradation pathways, had a strong positive relationship with the abundance of dinoflagellates, and DMSP-degrading gammaproteobacteria co-occurred with haptophytes. This in situ study of the drivers of DMSP fate in a coastal ecosystem demonstrates for the first time correlations between specific groups of bacterial DMSP degraders and phytoplankton taxa.

The fine art of integral membrane protein crystallisation.

Integral membrane proteins are among the most fascinating and important biomolecules as they play a vital role in many biological functions. Knowledge of their atomic structures is fundamental to the understanding of their biochemical function and key in many drug discovery programs. However, over the years, structure determination of integral membrane proteins has proven to be far from trivial, hence they are underrepresented in the protein data bank. Low expression levels, insolubility and instability are just a few of the many hurdles one faces when studying these proteins. X-ray crystallography has been the most used method to determine atomic structures of membrane proteins. However, the production of high quality membrane protein crystals is always very challenging, often seen more as art than a rational experiment. Here we review valuable approaches, methods and techniques to successful membrane protein crystallisation.

Recovery and identification of Pseudo-nitzschia (Bacillariophyceae) frustules from natural samples acquired using the environmental sample processor.

Many species within the diatom genus Pseudo-nitzschia are difficult to distinguish without applying molecular analytical or microscopy-based methods. DNA, antibody and lectin probes have previously been used to provide rapid and specific detection of species and strains in complex field assemblages. Recently, however, well-documented cryptic genetic diversity within the group has confounded results of DNA probe tests in particular. Moreover, the number of species descriptions within the genus continues to increase, as do insights into toxin production by both new and previously described species. Therefore, a combination of classical morphological techniques and modern molecular methodologies is needed to resolve ecophysiological traits of Pseudo-nitzschia species. Here, we present an approach to recover and identify frustules from sample collection filters used for toxin analysis onboard the Environmental Sample Processor (ESP), an in situ sample collection and analytical platform. This approach provides a new and powerful tool for correlating species presence with toxin detected remotely and in situ by the ESP, and has the potential to be applied broadly to other sampling configurations. This new technique will contribute to a better understanding of naturally occurring Pseudo-nitzschia community structure with respect to observed domoic acid outbreaks.

Autonomous application of quantitative PCR in the deep sea: in situ surveys of aerobic methanotrophs using the deep-sea environmental sample processor.

Recent advances in ocean observing systems and genomic technologies have led to the development of the deep-sea environmental sample processor (D-ESP). The D-ESP filters particulates from seawater at depths up to 4000 m and applies a variety of molecular assays to the particulates, including quantitative PCR (qPCR), to identify particular organisms and genes in situ. Preserved samples enable laboratory-based validation of in situ results and expanded studies of genomic diversity and gene expression. Tests of the D-ESP at a methane-rich mound in the Santa Monica Basin centered on detection of 16S rRNA and particulate methane monooxygenase (pmoA) genes for two putative aerobic methanotrophs. Comparison of in situ qPCR results with laboratory-based assays of preserved samples demonstrates the D-ESP generated high-quality qPCR data while operating autonomously on the seafloor. Levels of 16S rRNA and pmoA cDNA detected in preserved samples are consistent with an active community of aerobic methanotrophs near the methane-rich mound. These findings are substantiated at low methane sites off Point Conception and in Monterey Bay where target genes are at or below detection limits. Successful deployment of the D-ESP is a major step toward developing autonomous systems to facilitate a wide range of marine microbiological investigations.

Ecological divergence of syntopic marine bacterial species is shaped by gene content and expression.

Identifying mechanisms by which bacterial species evolve and maintain genomic diversity is particularly challenging for the uncultured lineages that dominate the surface ocean. A longitudinal analysis of bacterial genes, genomes, and transcripts during a coastal phytoplankton bloom revealed two co-occurring, highly related Rhodobacteraceae species from the deeply branching and uncultured NAC11-7 lineage. These have identical 16S rRNA gene amplicon sequences, yet their genome contents assembled from metagenomes and single cells indicate species-level divergence. Moreover, shifts in relative dominance of the species during dynamic bloom conditions over 7 weeks confirmed the syntopic species' divergent responses to the same microenvironment at the same time. Genes unique to each species and genes shared but divergent in per-cell inventories of mRNAs accounted for 5% of the species' pangenome content. These analyses uncover physiological and ecological features that differentiate the species, including capacities for organic carbon utilization, attributes of the cell surface, metal requirements, and vitamin biosynthesis. Such insights into the coexistence of highly related and ecologically similar bacterial species in their shared natural habitat are rare.

Cattle killer immunoglobulin-like receptor expression on leukocyte subsets suggests functional divergence compared to humans.

Cattle, sheep, and goats are the only species outside primates known to have an expanded and diversified family of killer immunoglobulin-like receptors (KIR). Primate KIR are expressed on the surface of NK and T cells and bind MHC-I to control activation. However, the surface expression, ligands and function of bovid KIR remain unknown. Cattle botaKIR2DL1 is the only functional KIR of the same DL-lineage as the expanded KIR in primates and we examined if leukocyte expression patterns were consistent with human. We raised a specific mouse anti-botaKIR2DL1 monoclonal antibody and assessed its utility in flow cytometry, ELISA, and western blot. Unlike primates, cattle DL-lineage KIR (botaKIR2DL1) is present on B cells and monocytes in addition to T cells and low-level expression on NK cells. Expression decreases after in vitro PBMC stimulation with IL-2. This suggests that botaKIR2DL1 has different functions, and potentially ligands, compared to primate KIR.

High-Throughput Production and Optimization of Membrane Proteins After Expression in Mammalian Cells.

High-quality protein samples are an essential requirement of any structural biology experiment. However, producing high-quality protein samples, especially for membrane proteins, is iterative and time-consuming. Membrane protein structural biology remains challenging due to low protein yields and high levels of instability especially when membrane proteins are removed from their native environments. Overcoming the twin problems of compositional and conformational instability requires an understanding of protein size, thermostability, and sample heterogeneity, while a parallelized approach enables multiple conditions to be analyzed simultaneously. We present a method that couples the high-throughput cloning of membrane protein constructs with the transient expression of membrane proteins in human embryonic kidney (HEK) cells and rapid identification of the most suitable conditions for subsequent structural biology applications. This rapid screening method is used routinely in the Membrane Protein Laboratory at Diamond Light Source to identify the most successful protein constructs and conditions while excluding those that will not work. The 96-well format is easily adaptable to enable the screening of constructs, pH, salts, encapsulation agents, and other additives such as lipids.

A versatile approach to high-density microcrystals in lipidic cubic phase for room-temperature serial crystallography.

Serial crystallography has emerged as an important tool for structural studies of integral membrane proteins. The ability to collect data from micrometre-sized weakly diffracting crystals at room temperature with minimal radiation damage has opened many new opportunities in time-resolved studies and drug discovery. However, the production of integral membrane protein microcrystals in lipidic cubic phase at the desired crystal density and quantity is challenging. This paper introduces VIALS (versatile approach to high-density microcrystals in lipidic cubic phase for serial crystallography), a simple, fast and efficient method for preparing hundreds of microlitres of high-density microcrystals suitable for serial X-ray diffraction experiments at both synchrotron and free-electron laser sources. The method is also of great benefit for rational structure-based drug design as it facilitates in situ crystal soaking and rapid determination of many co-crystal structures. Using the VIALS approach, room-temperature structures are reported of (i) the archaerhodopsin-3 protein in its dark-adapted state and 110 ns photocycle intermediate, determined to 2.2 and 1.7 Å, respectively, and (ii) the human A2A adenosine receptor in complex with two different ligands determined to a resolution of 3.5 Å.

Constraints on haplotype structure and variable gene frequencies suggest a functional hierarchy within cattle MHC class I.

Six major histocompatibility complex (MHC) classical class I genes have been identified in cattle, and up to three of these are expressed in variable combinations on different haplotypes. The origin and functional significance of this genetic complexity is unknown. However, an improved assembly of the cattle genome, an expanded database of full-length cDNA sequences and high-resolution frequency data concerning expressed class I genes in an economically important cattle breed combine to provide a new opportunity to study the significance of cattle MHC class I diversity. Analysis of these new data supports assignment of alleles to six discrete genes and further shows that all these classical genes share a common ancestor with a single non-classical gene, NC1. While haplotype structure is variable, with thirteen gene configurations identified, there are nevertheless clear constraints relating to both the number and combination of genes. Haplotypes expressing two classical genes are most frequently observed, and the classical class I gene 2 is almost invariably present. The frequency data support the dominance of gene 2, showing that close to 100 % of individuals carry at least one copy. This indicates a hierarchy in the functional importance of particular genes and haplotype structures. Haplotype frequency in cattle populations is therefore likely to impact on differential disease susceptibilities. This knowledge will be important for development of informed breeding strategies aimed at increasing the ability of cattle to survive in the face of future unpredictable pathogen exposure.

Two states of a light-sensitive membrane protein captured at room temperature using thin-film sample mounts.

Room-temperature diffraction methods are highly desirable for dynamic studies of biological macromolecules, since they allow high-resolution structural data to be collected as proteins undergo conformational changes. For crystals grown in lipidic cubic phase (LCP), an extruder is commonly used to pass a stream of microcrystals through the X-ray beam; however, the sample quantities required for this method may be difficult to produce for many membrane proteins. A more sample-efficient environment was created using two layers of low X-ray transmittance polymer films to mount crystals of the archaerhodopsin-3 (AR3) photoreceptor and room-temperature diffraction data were acquired. By using transparent and opaque polymer films, two structures, one corresponding to the desensitized, dark-adapted (DA) state and the other to the ground or light-adapted (LA) state, were solved to better than 1.9 Šresolution. All of the key structural features of AR3 were resolved, including the retinal chromophore, which is present as the 13-cis isomer in the DA state and as the all-trans isomer in the LA state. The film-sandwich sample environment enables diffraction data to be recorded at room temperature in both illuminated and dark conditions, which more closely approximate those in vivo. This simple approach is applicable to a wide range of membrane proteins crystallized in LCP and light-sensitive samples in general at synchrotron and laboratory X-ray sources.

A Raman spectral reference library of potential anthropogenic and biological ocean polymers.

Microplastics have been extensively documented in marine ecosystems and food webs with devastating impacts. To solve this global crisis, identifying the polymer composition is key for resolving the material origin, geographic source, and ecosystem life cycle of ocean plastics. Visually based techniques, importantly, are not diagnostic. Raman spectroscopy is an increasingly preferred identification method for its accuracy and reduced likelihood of misinterpretation, though it can be inaccessible due to cost of paywalled spectral libraries and availability of relevant polymer spectra for comparison. Here, we provide an open-access reference library of high-quality, broad-spectrum Raman spectra of major polymer categories germane to marine environments. The library includes high-quality spectra from: (a) pristine anthropogenic polymers newly sourced from manufacturers (n = 40), (b) weathered anthropogenic polymers collected from used consumer, beachcast, agricultural, and fishery sources (n = 22), and (c) biological polymers representing diverse marine taxa, trophic levels, and tissues (n = 17). We hope this reference library can help this rapidly expanding scientific community and facilitate progress in the global plastic pollution crisis.

The high-throughput production of membrane proteins.

Membrane proteins, found at the junctions between the outside world and the inner workings of the cell, play important roles in human disease and are used as biosensors. More than half of all therapeutics directly affect membrane protein function while nanopores enable DNA sequencing. The structural and functional characterisation of membrane proteins is therefore crucial. However, low levels of naturally abundant protein and the hydrophobic nature of membrane proteins makes production difficult. To maximise success, high-throughput strategies were developed that rely upon simple screens to identify successful constructs and rapidly exclude those unlikely to work. Parameters that affect production such as expression host, membrane protein origin, expression vector, fusion-tags, encapsulation reagent and solvent composition are screened in parallel. In this way, constructs with divergent requirements can be produced for a variety of structural applications. As structural techniques advance, sample requirements will change. Single-particle cryo-electron microscopy requires less protein than crystallography and as cryo-electron tomography and time-resolved serial crystallography are developed new sample production requirements will evolve. Here we discuss different methods used for the high-throughput production of membrane proteins for structural biology.

Transient Transfection and Expression of Eukaryotic Membrane Proteins in Expi293F Cells and Their Screening on a Small Scale: Application for Structural Studies.

Cancers, neurodegenerative and infectious diseases remain some of the leading causes of deaths worldwide. The structure-guided drug design is essential to advance drug development for these important diseases. One of the key challenges in the structure determination workflow is the production of eukaryotic membrane proteins (drug targets) of high quality. A number of expression systems have been developed for the production of eukaryotic membrane proteins. In this chapter, an optimized detailed protocol for transient transfection and expression of eukaryotic membrane proteins in Expi293F cells is presented. Testing expression and purification on a small scale allow optimizing conditions for sample preparation for downstream structural (cryo-EM) elucidation.

Structures of the archaerhodopsin-3 transporter reveal that disordering of internal water networks underpins receptor sensitization.

Many transmembrane receptors have a desensitized state, in which they are unable to respond to external stimuli. The family of microbial rhodopsin proteins includes one such group of receptors, whose inactive or dark-adapted (DA) state is established in the prolonged absence of light. Here, we present high-resolution crystal structures of the ground (light-adapted) and DA states of Archaerhodopsin-3 (AR3), solved to 1.1 Å and 1.3 Å resolution respectively. We observe significant differences between the two states in the dynamics of water molecules that are coupled via H-bonds to the retinal Schiff Base. Supporting QM/MM calculations reveal how the DA state permits a thermodynamic equilibrium between retinal isomers to be established, and how this same change is prevented in the ground state in the absence of light. We suggest that the different arrangement of internal water networks in AR3 is responsible for the faster photocycle kinetics compared to homologs.

A system of coordinated autonomous robots for Lagrangian studies of microbes in the oceanic deep chlorophyll maximum.

The deep chlorophyll maximum (DCM) layer is an ecologically important feature of the open ocean. The DCM cannot be observed using aerial or satellite remote sensing; thus, in situ observations are essential. Further, understanding the responses of microbes to the environmental processes driving their metabolism and interactions requires observing in a reference frame that moves with a plankton population drifting in ocean currents, i.e., Lagrangian. Here, we report the development and application of a system of coordinated robots for studying planktonic biological communities drifting within the ocean. The presented Lagrangian system uses three coordinated autonomous robotic platforms. The focal platform consists of an autonomous underwater vehicle (AUV) fitted with a robotic water sampler. This platform localizes and drifts within a DCM community, periodically acquiring samples while continuously monitoring the local environment. The second platform is an AUV equipped with environmental sensing and acoustic tracking capabilities. This platform characterizes environmental conditions by tracking the focal platform and vertically profiling in its vicinity. The third platform is an autonomous surface vehicle equipped with satellite communications and subsea acoustic tracking capabilities. While also acoustically tracking the focal platform, this vehicle serves as a communication relay that connects the subsea robot to human operators, thereby providing situational awareness and enabling intervention if needed. Deployed in the North Pacific Ocean within the core of a cyclonic eddy, this coordinated system autonomously captured fundamental characteristics of the in situ DCM microbial community in a manner not possible previously.

A sample-in-answer-out instrument for the detection of multiple respiratory pathogens in unprepared nasopharyngeal swab samples.

Multiplex RT-PCR suspension array assays provide a powerful tool for identifying the causative agent(s) of respiratory infections. These assays are time consuming and laborious on a time-per-sample basis if only a few samples require processing. To address this shortcoming and provide an automated solution for fast detection and identification of viral pathogens, we developed the first automated multiplex RT-PCR suspension array instrument capable of handling unprepared clinical samples. The instrument requires less than 3 minutes of hands-on time for a result generated in approximately 2.5 hours. In analytical studies, the instrument performed as well as manually performed assays. The performance of the instrument and loaded multiplex viral detection assay was then tested using unprepared nasopharyngeal samples. The instrument-performed assay detected 61 of 71 RSV positive samples, for a sensitivity of 85.9%. Adenovirus (n = 5) and influenza B (n = 3) were less prevalent in the sample set, but detected to similar levels, 80% and 75%, respectively. The same sample set was also tested using FDA approved immuno-assay rapid tests, and the instrument was found to be more sensitive than the rapid tests with the sole exception being influenza A (n = 16), which was poorly detected due to significant sequence mismatches between the influenza A primer/probe set included in the multiplex mixture and the circulating influenza A strains. Overall, these data demonstrate the developed prototype platform performs multiplex array assays as well as hand-performed assays, and that the instrument's sensitivity and specificity are dictated by the quality of the loaded multiplex assay.

Changes in Membrane Protein Structural Biology.

Membrane proteins are essential components of many biochemical processes and are important pharmaceutical targets. Membrane protein structural biology provides the molecular rationale for these biochemical process as well as being a highly useful tool for drug discovery. Unfortunately, membrane protein structural biology is a difficult area of study due to low protein yields and high levels of instability especially when membrane proteins are removed from their native environments. Despite this instability, membrane protein structural biology has made great leaps over the last fifteen years. Today, the landscape is almost unrecognisable. The numbers of available atomic resolution structures have increased 10-fold though advances in crystallography and more recently by cryo-electron microscopy. These advances in structural biology were achieved through the efforts of many researchers around the world as well as initiatives such as the Membrane Protein Laboratory (MPL) at Diamond Light Source. The MPL has helped, provided access to and contributed to advances in protein production, sample preparation and data collection. Together, these advances have enabled higher resolution structures, from less material, at a greater rate, from a more diverse range of membrane protein targets. Despite this success, significant challenges remain. Here, we review the progress made and highlight current and future challenges that will be overcome.

Robotic environmental DNA bio-surveillance of freshwater health.

Autonomous water sampling technologies may help to overcome the human resource challenges of monitoring biological threats to rivers over long time periods and across large geographic areas. The Monterey Bay Aquarium Research Institute has pioneered a robotic Environmental Sample Processor (ESP) that overcomes some of the constraints associated with traditional sampling since it can automate water sample filtration and preservation of the captured material. The ESP was originally developed for marine environment applications. Here we evaluated whether the ESP can provide reliable, timely information on environmental (e)DNA detections of human and fish pathogens and introduced fishes at U.S. Geological Survey streamgage sites in freshwater rivers. We compared eDNA collected via ESP at high frequency (e.g., every 3 h) with manual eDNA collections collected at lower frequency (e.g., weekly). We found that water samples filtered and preserved by ESPs successfully detected the DNA of human pathogens, fish pathogens and introduced fishes. Both ESP and manually collected samples provided similar information about target DNA presence. We suggest that the greatest current benefit of the ESP is the cost savings of high frequency, bio-surveillance at remote or hard to access sites. The full potential of robotic technologies like the ESP will be realized when they can more easily execute in situ analyses of water samples and rapidly transmit results to decision-makers.

Near real-time, autonomous detection of marine bacterioplankton on a coastal mooring in Monterey Bay, California, using rRNA-targeted DNA probes.

A sandwich hybridization assay (SHA) was developed to detect 16S rRNAs indicative of phylogenetically distinct groups of marine bacterioplankton in a 96-well plate format as well as low-density arrays printed on a membrane support. The arrays were used in a field-deployable instrument, the Environmental Sample Processor (ESP). The SHA employs a chaotropic buffer for both cell homogenization and hybridization, thus target sequences are captured directly from crude homogenates. Capture probes for seven of nine different bacterioplankton clades examined reacted specifically when challenged with target and non-target 16S rRNAs derived from in vitro transcribed 16S rRNA genes cloned from natural samples. Detection limits were between 0.10-1.98 and 4.43- 12.54 fmole ml(-1) homogenate for the 96-well plate and array SHA respectively. Arrays printed with five of the bacterioplankton-specific capture probes were deployed on the ESP in Monterey Bay, CA, twice in 2006 for a total of 25 days and also utilized in a laboratory time series study. Groups detected included marine alphaproteobacteria, SAR11, marine cyanobacteria, marine group I crenarchaea, and marine group II euryarchaea. To our knowledge this represents the first report of remote in situ DNA probe-based detection of marine bacterioplankton.