Dual Optoelectronic Organic Field-Effect Device: Combination of Electroluminescence and Photosensitivity.

Merging the functionality of an organic field-effect transistor (OFET) with either a light emission or a photoelectric effect can increase the efficiency of displays or photosensing devices. In this work, we show that an organic semiconductor enables a multifunctional OFET combining electroluminescence (EL) and a photoelectric effect. Specifically, our computational and experimental investigations of a six-ring thiophene-phenylene co-oligomer (TPCO) revealed that this material is promising for OFETs, light-emitting, and photoelectric devices because of the large oscillator strength of the lowest-energy singlet transition, efficient luminescence, pronounced delocalization of the excited state, and balanced charge transport. The fabricated OFETs showed a photoelectric response for wavelengths shorter than 530 nm and simultaneously EL in the transistor channel, with a maximum at ~570 nm. The devices demonstrated an EL external quantum efficiency (EQE) of ~1.4% and a photoelectric responsivity of ~0.7 A W-1, which are among the best values reported for state-of-the-art organic light-emitting transistors and phototransistors, respectively. We anticipate that our results will stimulate the design of efficient materials for multifunctional organic optoelectronic devices and expand the potential applications of organic (opto)electronics.

Suppression of dynamic disorder by electrostatic interactions in structurally close organic semiconductors.

Dynamic disorder manifested in fluctuations of charge transfer integrals considerably hinders charge transport in high-mobility organic semiconductors. Accordingly, strategies for suppression of the dynamic disorder are highly desirable. In this study, we suggest a novel promising strategy for suppression of dynamic disorder-tuning the molecular electrostatic potential. Specifically, we show that the intensities of the low-frequency (LF) Raman spectra for crystalline organic semiconductors consisting of π-isoelectronic small molecules (i.e. bearing the same number of π electrons)-benzothieno[3,2-b][1]benzothiophene (BTBT), chrysene, tetrathienoacene (TTA) and naphtho[1,2-b:5,6-b']dithiophene (NDT)-differ significantly, indicating significant differences in the dynamic disorder. This difference is explained by suppression of the dynamic disorder in chrysene and NDT because of stronger intermolecular electrostatic interactions. As a result, guidelines for the increase of the crystal rigidity for the rational design of high-mobility organic semiconductors are suggested.

Toward probing of the local electron-phonon interaction in small-molecule organic semiconductors with Raman spectroscopy.

Electron-phonon interaction strongly affects and often limits charge transport in organic semiconductors (OSs). However, approaches to its experimental probing are still in their infancy. In this study, we probe the local electron-phonon interaction (quantified by the charge-transfer reorganization energy) in small-molecule OSs by means of Raman spectroscopy. Applying density functional theory calculations to four series of oligomeric OSs-polyenes, oligofurans, oligoacenes, and heteroacenes-we extend the previous evidence that the intense Raman vibrational modes considerably contribute to the reorganization energy in several molecules and molecular charge-transfer complexes, to a broader scope of OSs. The correlation between the contribution of the vibrational mode to the reorganization energy and its Raman intensity is especially prominent for the resonance conditions. The experimental Raman spectra obtained with various excitation wavelengths are in good agreement with the theoretical ones, indicating the reliability of our calculations. We also establish for the first time relations between the spectrally integrated Raman intensity, the reorganization energy, and the molecular polarizability for the resonance and off-resonance conditions. The results obtained are expected to facilitate the experimental studies of the electron-phonon interaction in OSs for an improved understanding of charge transport in these materials.

Impact of terminal substituents on the electronic, vibrational and optical properties of thiophene-phenylene co-oligomers.

Owing to the combination of efficient charge transport and bright luminescence, thiophene-phenylene co-oligomers (TPCOs) are promising materials for organic light-emitting devices such as diodes, transistors and lasers. The synthetic flexibility of TPCOs enables facile tuning of their properties. In this study, we address the effect of various electron-donating and electron-withdrawing symmetric terminal substituents (fluorine, methyl, trifluoromethyl, methoxy, tert-butyl, and trimethylsilyl) on frontier orbitals, charge distribution, static polarizabilities, molecular vibrations, bandgaps and photoluminescence quantum yields of 5,5'-diphenyl-2,2'-bithiophene (PTTP). By combining DFT calculations with cyclic voltammetry and absorption, photoluminescence, and Raman spectroscopies, we show that symmetric terminal substitution tunes the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energies of TPCOs within a range of ∼0.7 eV, shifts the frequencies of the vibrational modes associated with the phenyl rings, changes the photoluminescence quantum yield by about two-fold and slightly changes the bandgap by ∼0.1 eV. We demonstrate that these effects are governed by two factors: the Hammet constant of the substituents and their involvement in the π-conjugation/hyperconjugation described by the effective conjugation length of the substituted oligomer. A detailed picture underlying the effect of the terminal substituents on the electronic, vibrational and optical properties of TPCOs is presented. Overall, the unraveled relationships between the structure and the properties of the substituted PTTPs should facilitate a rational design of π-conjugated (co-)oligomers for efficient organic optoelectronic devices.

Easily processable highly ordered Langmuir-Blodgett films of quaterthiophene disiloxane dimer for monolayer organic field-effect transistors.

Self-assembly of highly soluble water-stable tetramethyldisiloxane-based dimer of α,α'-dialkylquaterthiophene on the water-air interface was investigated by Langmuir, grazing incidence X-ray diffraction, and X-ray reflectivity techniques. The conditions for formation of very homogeneous crystalline monolayer Langmuir-Blodgett (LB) films of the oligomer were found. Monolayer organic field-effect transistors (OFETs) based on these LB films as a semiconducting layer showed hole mobilities up to 3 × 10(-3) cm(2)/(V s), on-off ratio of 10(5), small hysteresis, and high long-term stability. The electrical performance of the LB films studied is close to that for the same material in the bulk or in the monolayer OFETs prepared from water vapor sensitive chlorosilyl derivatives of quaterthiophene by self-assembling from solution. These findings show high potential of disiloxane-based LB films in monolayer OFETs for large-area organic electronics.

Crystals of Diphenyl-Benzothiadiazole and Its Derivative with Terminal Trimethylsilyl Substituents: Growth from Solutions, Structure, and Fluorescence Properties.

Linear conjugated molecules consisting of benzothiadiazole (BTD) and phenyl rings are highly efficient organic luminophores. Crystals based on these compounds have great potential for use as light-emitting elements, in particular, scintillation detectors. This paper compares the peculiarities of growth, structure, and fluorescent properties of crystals based on 4,7-diphenyl-2,1,3-benzothiadiazole (P2-BTD) and its organosilicon derivative 4,7-bis(4-(trimethylsilyl)phenyl) BTD ((TMS-P)2-BTD). The conditions for the formation of centimeter-scale single crystals were found for the former, while it was possible to prepare also bulky faceted individual crystals for the latter. The structures of P2-BTD and (TMS-P)2-BTD crystals at 85 and 293 K were investigated by single-crystal X-ray diffraction. The crystal structure of P2-BTD has been refined (sp. gr. P1̅, Z = 4), and for (TMS-P)2-BTD crystals, the structure has been solved for the first time (sp. gr. P21/c, Z = 32). Experimental and theoretical investigations of the absorption-fluorescent properties of solutions and crystals of the molecules have been carried out. The luminophores are characterized by a large Stokes shift for both solutions and crystals with a high fluorescence quantum yield of 75-98% for solutions and 50-85% for the crystals. A solvatochromic effect was observed for solutions of both luminophores: an increase in the values of the fluorescence quantum yield and the excited state lifetime were established with increasing the solvent polarity. Fluorescence properties of solutions and crystals have been analyzed using the data on crystal structure and conformation structure of the molecules as well as density functional theory calculations of their electronic structure. The results have shown that the crystal packing of P2-BTD molecules exhibits uniformity in conformational states, while (TMS-P)2-BTD molecules display a variety of conformational structures in the crystals. This unique combination of features makes them a remarkable example among the other molecular systems for identifying the relationship between the structure and absorption-fluorescence properties through comparative analysis.

Formation of self-assembled organosilicon-functionalized quinquethiophene monolayers by fast processing techniques.

Different techniques for a relatively fast self-assembled monolayer film formation such as Langmuir-Blodgett (LB), spin-coating, and dip-coating methods have been compared using chloro[11-(5''''-ethyl-2,2':5',2″:5''',2''':5''',2''''-quinquethiophene-5-yl)undecyl]dimethylsilane as a reactive precursor. It was shown that both spin-coating and LB techniques are very promising methods for preparation of highly ordered monolayer films of organosilicon-functionalized quinquethiophene with vertical orientation of oligothiophene fragments, while dip-coating gives only partial coverage. Optimal conditions for complete filling out the substrate surface by the quinquethiophene-containing monolayer by spin-coating and LB methods have been found. Grazing incidence X-ray diffraction measurements confirmed formation of in-plane crystalline order within the monolayer film. Changes in the layer structure were established by X-ray reflectivity and grazing incidence X-ray diffraction methods.

A new linear phenyloxazole-benzothiadiazole luminophore: crystal growth, structure and fluorescence properties.

A new linear luminophore consisting of five conjugated units of oxazole, phenylene and a central benzothiadiazole fragment, 4,7-bis[4-(1,3-oxazol-5-yl)phenyl]-2,1,3-benzothiadiazole, has been synthesized and characterized. Needle-like single-crystal samples up to 10 mm in length were obtained by physical vapor transport. The crystal structure was determined at 95 K and 293 K using single-crystal X-ray diffraction. With decreasing temperature, the space group P21/n does not change, but the unit-cell volume of the crystal decreases. The presence of intra- and intermolecular hydrogen bonds was established. Melting parameters (Tm = 305.5°C, ΔHm = 52.2 kJ mol-1) and the presence of a liquid-crystalline mesophase (TLC = 336.3°C, ΔHLC = 1.4 kJ mol-1) were determined by differential scanning calorimetry and in situ thermal polarization optical microscopy studies. The presence of linear chains of hydrogen bonds ensures high stability of the crystal structure in a wide temperature range. The luminophore is characterized by a large Stokes shift (5120-5670 cm-1) and a high quantum yield of fluorescence, reaching 96% in solutions (λmax = 517 nm) and 27% in thin crystalline films (λmax = 529 nm). The calculated absorption and emission spectra are in good agreement with the experimental data. Because of the excellent optical properties and high thermal stability, the new linear luminophore has great potential for application in organic photonics and optoelectronic devices.

Synthesis and Photophysical Properties of Novel Meta-Conjugated Organic Molecules with 1,3,5-Benzene Branching Units.

The synthesis and photophysical investigation of three novel meta-conjugated molecules based on 3,1,2-benzothiadiazole and thiophene-2,5-diyl derivatives linked through 1,3,5-benzene branching units are described. Each of them is a symmetrical molecule with two branching units, four identical lateral thiophene-containing fragments, and one central benzothiadiazole-containing fragment. To study the effect of the chemical structure on their photophysical properties, the molecules with different linearly conjugated lateral and central fragments due to incorporation of additional thiophene rings were synthesized and compared. It was shown that absorption spectra of the meta-conjugated molecules can be represented as a sum of absorption bands of model compounds for their peripheral and central fragments containing a common benzene ring being branched at the 1,3,5-benzene unit in the meta-conjugated molecules. Therefore, they cannot be considered simply as isolated π-conjugated systems of their peripheral and central fragments. Instead, DFT calculations showed that several transitions between the orbitals located in different regions of the meta-conjugated molecule are responsible for the formation of their absorption spectra, and they strongly depend on the degree of their overlapping. Theoretical absorption spectra reconstructed from the DFT data demonstrated a good agreement with the experimental results: the transitions with larger oscillator strength correspond to the bands with higher molar extinction coefficients and vice versa. It was shown that luminescence spectral maxima of the meta-conjugated molecules monotonically shift to the lower energy from 489 to 540 and 613 nm with increasing the number of thiophene rings in the peripheral and central fragments, respectively. However, luminescence quantum yield of the meta-conjugated molecules critically depends on the length of linearly conjugated fragments in its structure decreasing from 24% to 1.3% with increasing the number of thiophene rings in the lateral fragments but increasing to 90% in the molecule with more thiophene rings in both types of the fragments. The results obtained are well correlated to the ratio of radiative and nonradiative deactivation rate constants of the meta-conjugated molecules that indicates a high rate of internal conversion between the excited states corresponding to different fragments of the molecule. The CV measurements allowed estimating the HOMO, LUMO, and bandgap values of the target and model compounds, which confirm the presence of meta-conjugation within the molecules investigated. Thus, connection of linearly conjugated fragments through meta-positions (meta-conjugation) of a benzene ring leads to an intermediate option between fully conjugated and nonconjugated molecules due to partial delocalization of electron density through the 1,3,5-substituted benzene branching center.

Biorecognition Layer Based On Biotin-Containing [1]Benzothieno[3,2-b][1]benzothiophene Derivative for Biosensing by Electrolyte-Gated Organic Field-Effect Transistors.

Requirements of speed and simplicity in testing stimulate the development of modern biosensors. Electrolyte-gated organic field-effect transistors (EGOFETs) are a promising platform for ultrasensitive, fast, and reliable detection of biological molecules for low-cost, point-of-care bioelectronic sensing. Biosensitivity of the EGOFET devices can be achieved by modification with receptors of one of the electronic active interfaces of the transistor gate or organic semiconductor surface. Functionalization of the latter gives the advantage in the creation of a planar architecture and compact devices for lab-on-chip design. Herein, we propose a universal, fast, and simple technique based on doctor blading and Langmuir-Schaefer methods for functionalization of the semiconducting surface of C8-BTBT-C8, allowing the fabrication of a large-scale biorecognition layer based on the novel functional derivative of BTBT-containing biotin fragments as a foundation for further biomodification. The fabricated devices are very efficient and operate stably in phosphate-buffered saline solution with high reproducibility of electrical properties in the EGOFET regime. The development of biorecognition properties of the proposed biolayer is based on the streptavidin-biotin interactions between the consecutive layers and can be used for a wide variety of receptors. As a proof-of-concept, we demonstrate the specific response of the BTBT-based biorecognition layer in EGOFETs to influenza A virus (H7N1 strain). The elaborated approach to biorecognition layer formation is appropriate but not limited to aptamer-based receptor molecules and can be further applied for fabricating several biosensors for various analytes on one substrate and paves the way for "electronic tongue" creation.

Fully integrated ultra-sensitive electronic nose based on organic field-effect transistors.

Modern solid-state gas sensors approaching ppb-level limit of detection open new perspectives for process control, environmental monitoring and exhaled breath analysis. Organic field-effect transistors (OFETs) are especially promising for gas sensing due to their outstanding sensitivities, low cost and small power consumption. However, they suffer of poor selectivity, requiring development of cross-selective arrays to distinguish analytes, and environmental instability, especially in humid air. Here we present the first fully integrated OFET-based electronic nose with the whole sensor array located on a single substrate. It features down to 30 ppb limit of detection provided by monolayer thick active layers and operates in air with up to 95% relative humidity. By means of principal component analysis, it is able to discriminate toxic air pollutants and monitor meat product freshness. The approach presented paves the way for developing affordable air sensing networks for the Internet of Things.

Impact of N-substitution on structural, electronic, optical, and vibrational properties of a thiophene-phenylene co-oligomer.

Properties of the organic semiconductors can be finely tuned via changes in their molecular structure. However, the relationship between the molecular structure, molecular packing, and (opto)electronic properties of the organic semiconductors to guide their smart design remains elusive. In this study, we address computationally and experimentally the impact of subtle modification of a thiophene-phenylene co-oligomer CF3-PTTP-CF3 on the molecular properties, crystal structure, charge transport, and optoelectronic properties. This modification consists in the substitution of two C-H atom pairs by N atoms in the thiophene units and hence converting them to thiazole units. A dramatic effect of the N-substitution on the crystal structure-the crossover from the herringbone packing motif to π-stacking-is attributed to significant changes in the molecular electrostatic potential. The changes in the molecular and crystal structure resulting from the N-substitution clearly reveal themselves in the Raman spectra. The increase of the calculated electron mobility in the corresponding crystals as a result of the N-substitution is rationalized in terms of the changes in the molecular and crystal structure. The charge transport, electroluminescence, and photoelectric properties are compared in thin-film organic field-effect transistors based on CF3-PTTP-CF3 and its N-substituted counterpart. An intriguing similarity between the effects of N-substitution in the thiophene rings and fluorination of the thiophene-phenylene oligomer is revealed, which is probably associated with a more general effect of electronegative substitution. The obtained results are anticipated to facilitate the rational design of organic semiconductors.

Fluorinated Thiophene-Phenylene Co-Oligomers for Optoelectronic Devices.

Organic optoelectronics requires materials combining bright luminescence and efficient ambipolar charge transport. Thiophene-phenylene co-oligomers (TPCOs) are promising highly emissive materials with decent charge-carrier mobility; however, they typically show poor electron injection in devices, which is usually assigned to high energies of their lowest unoccupied molecular orbitals (LUMOs). A widely used approach to lower the frontier orbitals energy levels of a conjugated molecule is its fluorination. In this study, we synthesized three new fluorinated derivatives of one of the most popular TPCOs, 2,2'-(1,4-phenylene)bis[5-phenylthiophene] (PTPTP) and studied them by cyclic voltammetry, absorption, photoluminescence, and Raman spectroscopies. The obtained data reveal a positive effect of fluorination on the optoelectronic properties of PTPTP: LUMO levels are finely tuned, and photoluminescence quantum yield and absorbance are increased. We then grew crystals from fluorinated PTPTPs, resolved their structures, and showed that fluorination dramatically affects the packing motif and facilitates π-stacking. Finally, we fabricated thin-film organic field-effect transistors (OFETs) and demonstrated a strong impact of fluorination on charge injection/transport for both types of charge carriers, namely, electrons and holes. Specifically, balanced ambipolar charge transport and electroluminescence were observed only in the OFET active channel based on the partially fluorinated PTPTP. The obtained results can be extended to other families of conjugated oligomers and highlight the efficiency of fluorination for rational design of organic semiconductors for optoelectronic devices.

When dendrimers are not better - rational design of nanolayers for high-performance organic electronic devices.

Several generations of carbosilane dendrimers with quaterthiophene end groups were studied by X-ray scattering in small and wide angles, differential scanning calorimetry, polarizing optical and atomic force microscopy and molecular modelling. It was established that the semiconducting properties of such materials are determined by the formation of smectic structures in which aliphatic regions, possessing a low degree of the ordering, alternate with highly ordered herring-bone type crystallites formed by aromatic fragments. The presence of long aliphatic spacers in the dendrimers' structure allows easy formation of such crystallites. Such dendrimers assume flattened conformations, as a smectic mesophase is thermodynamically preferable in a wide temperature range. Only in the dendrimers of the fifth generation, as the density of periphery regions increases substantially, π-π stacking of oligothiophene groups is not enough to hold together, and the molecules take on a spherical shape. As a result, extended conducting conjugated regions do not form, and dendrimers of high generations possess comparatively low semiconducting properties. From the technological point of view, quaterthiophene based carbosilane dendrimers are able to form highly uniform functional films. However, the use of lower generation dendrimers is much more preferable, as additional synthetic steps for the production of higher generation compounds do not lead to the improvement of functional properties.

Highly luminescent crystals of a novel linear π-conjugated thiophene-phenylene co-oligomer with a benzothiadiazole fragment.

The synthesis, growth from solutions and structure of crystals of a new linear thiophene-phenylene co-oligomer with a central benzothiadiazole fragment with a conjugated core, (TMS-2T-Ph)2-BTD, are presented. Single-crystal samples in the form of needles with a length of up to 7 mm were grown and their crystal structure was determined at 85 K and 293 K using single-crystal X-ray diffraction. The conformational differences between the crystal structures are insignificant. The parameters of melting and liquid crystalline phase transitions of (TMS-2T-Ph)2-BTD were established using differential scanning calorimetry and the thermal stability of the crystals was investigated using thermogravimetric analysis. The optical absorption and photoluminescence spectra of the solutions and crystals of (TMS-2T-Ph)2-BTD were obtained, and the kinetics of their photodegradation under the action of UV radiation were studied.

Highly Sensitive Air-Stable Easily Processable Gas Sensors Based on Langmuir-Schaefer Monolayer Organic Field-Effect Transistors for Multiparametric H2S and NH3 Real-Time Detection.

A combination of low limit of detection, low power consumption, and portability makes organic field-effect transistor (OFET) chemical sensors promising for various applications in the areas of industrial safety control, food spoilage detection, and medical diagnostics. However, the OFET sensors typically lack air stability and restoration capability at room temperature. Here, we report on a new design of highly sensitive gas sensors based on Langmuir-Schaefer monolayer organic field-effect transistors (LS OFETs) prepared from organosilicon derivative of [1]benzothieno[3,2- b][1]-benzothiophene. The devices fabricated are able to operate in air and allow an ultrafast detection of different analytes at low concentrations down to tens of parts per billion. The sensors are reusable and can be utilized in real-time air-quality monitoring systems. We show that a direct current response of the LS OFET can be split into the alteration of various transistor parameters, responsible for the interactions with different toxic gases. The sensor response acquiring approach developed allows distinguishing two different gases, H2S and NH3, with a single sensing device. The results reported open new perspectives for the OFET-based gas-sensing technology and pave the way for easy detection of the other types of gases, enabling the development of complex air analysis systems based on a single sensor.

Luminescent Organic Semiconducting Langmuir Monolayers.

In recent years, monolayer organic field-effect devices such as transistors and sensors have demonstrated their high potential. In contrast, monolayer electroluminescent organic field-effect devices are still in their infancy. One of the key challenges here is to create an organic material that self-organizes in a monolayer and combines efficient charge transport with luminescence. Herein, we report a novel organosilicon derivative of oligothiophene-phenylene dimer D2-Und-PTTP-TMS (D2, tetramethyldisiloxane; Und, undecylenic spacer; P, 1,4-phenylene; T, 2,5-thiophene; TMS, trimethylsilyl) that meets these requirements. The self-assembled Langmuir monolayers of the dimer were investigated by steady-state and time-resolved photoluminescence spectroscopy, atomic force microscopy, X-ray reflectometry, and grazing-incidence X-ray diffraction, and their semiconducting properties were evaluated in organic field-effect transistors. We found that the best uniform, fully covered, highly ordered monolayers were semiconducting. Thus, the ordered two-dimensional (2D) packing of conjugated organic molecules in the semiconducting Langmuir monolayer is compatible with its high-yield luminescence, so that 2D molecular aggregation per se does not preclude highly luminescent properties. Our findings pave the way to the rational design of functional materials for monolayer organic light-emitting transistors and other optoelectronic devices.

Highly Luminescent Solution-Grown Thiophene-Phenylene Co-Oligomer Single Crystals.

Thiophene-phenylene co-oligomers (TPCOs) are among the most promising materials for organic light emitting devices. Here we report on record high among TPCO single crystals photoluminescence quantum yield reaching 60%. The solution-grown crystals are stronger luminescent than the vapor-grown ones, in contrast to a common believe that the vapor-processed organic electronic materials show the highest performance. We also demonstrate that the solution-grown TPCO single crystals perform in organic field effect transistors as good as the vapor-grown ones. Altogether, the solution-grown TPCO crystals are demonstrated to hold great potential for organic electronics.

Polymer Surface Engineering for Efficient Printing of Highly Conductive Metal Nanoparticle Inks.

An approach to polymer surface modification using self-assembled layers (SALs) of functional alkoxysilanes has been developed in order to improve the printability of silver nanoparticle inks and enhance adhesion between the metal conducting layer and the flexible polymer substrate. The SALs have been fully characterized by AFM, XPS, and WCA, and the resulting printability, adhesion, and electrical conductivity of the screen-printed metal contacts have been estimated by cross-cut tape test and 4-point probe measurements. It was shown that (3-mercaptopropyl)trimethoxysilane SALs enable significant adhesion improvements for both aqueous- and organic-based silver inks, approaching nearly 100% for PEN and PDMS substrates while exhibiting relatively low sheet resistance up to 0.1 Ω/sq. It was demonstrated that SALs containing functional -SH or -NH2 end groups offer the opportunity to increase the affinity of the polymer substrates to silver inks and thus to achieve efficient patterning of highly conductive structures on flexible and stretchable substrates.

Nanostructured organosilicon luminophores and their application in highly efficient plastic scintillators.

Organic luminophores are widely used in various optoelectronic devices, which serve for photonics, nuclear and particle physics, quantum electronics, medical diagnostics and many other fields of science and technology. Improving their spectral-luminescent characteristics for particular technical requirements of the devices is a challenging task. Here we show a new concept to universal solution of this problem by creation of nanostructured organosilicon luminophores (NOLs), which are a particular type of dendritic molecular antennas. They combine the best properties of organic luminophores and inorganic quantum dots: high absorption cross-section, excellent photoluminescence quantum yield, fast luminescence decay time and good processability. A NOL consists of two types of covalently bonded via silicon atoms organic luminophores with efficient Förster energy transfer between them. Using NOLs in plastic scintillators, widely utilized for radiation detection and in elementary particles discoveries, led to a breakthrough in their efficiency, which combines both high light output and fast decay time. Moreover, for the first time plastic scintillators, which emit light in the desired wavelength region ranging from 370 to 700 nm, have been created. We anticipate further applications of NOLs as working elements of pulsed dye lasers in photonics, optoelectronics and as fluorescent labels in biology and medical diagnostics.