Trends in single-impact electrochemistry for bacteria analysis.

Single-impact electrochemistry for the analysis of bacteria is a powerful technique for biosensing applications at the single-cell scale. The sensitivity of this electro-analytical method has been widely demonstrated based on chronoamperometric measurements at an ultramicroelectrode polarized at the appropriate potential of redox species in solution. Furthermore, the most recent studies display a continuous improvement in the ability of this sensitive electrochemical method to identify different bacterial strains with better selectivity. To achieve this, several strategies, such as the presence of a redox mediator, have been investigated for detecting and identifying the bacterial cell through its own electrochemical behavior. Both the blocking electrochemical impacts method and electrochemical collisions of single bacteria with a redox mediator are reported in this review and discussed through relevant examples. An original sensing strategy for virulence factors originating from pathogenic bacteria is also presented, based on a recent proof of concept dealing with redox liposome single-impact electrochemistry. The limitations, applications, perspectives, and challenges of single-impact electrochemistry for bacteria analysis are briefly discussed, based on the most significant published data.

In-line formation and identification of toxic reductive metabolites of aristolochic acid using electrochemistry mass spectrometry coupling.

Small-molecule metabolism has been extensively studied in the past decades, notably driven by the development of new pharmaceutical ingredients. The understanding of metabolism is critical to the anticipation of reactive metabolite formation in vivo that is often associated with toxicity. Electrochemistry has been proposed to simulate the oxidoreductive metabolism reaction catalyzed by cytochrome P450, a family of microsomal enzymes strongly involved in xenobiotic metabolism. The implementation of an electrochemical cell online with mass spectrometry allows for the fast formation and identification of the reaction end products. This study discusses the ability of the synthetic electrochemical approach to simulate a complex lactamization reaction that involves the formation of reactive metabolites. Aristolochic acid I was used as a model molecule to evaluate the ability of electrochemical simulation to generate nitroso, hydroxylamine, N-hydroxylactam, lactam, and nitrenium ion metabolites.

Detection of Bacterial Rhamnolipid Toxin by Redox Liposome Single Impact Electrochemistry.

The detection of Rhamnolipid virulence factor produced by Pseudomonas aeruginosa involved in nosocomial infections is reported by using the redox liposome single impact electrochemistry. Redox liposomes based on 1,2-dimyristoyl-sn-glycero-3-phosphocholine as a pure phospholipid and potassium ferrocyanide as an encapsulated redox content are designed for using the interaction of the target toxin with the lipid membrane as a sensing strategy. The electrochemical sensing principle is based on the weakening of the liposomes lipid membrane upon interaction with Rhamnolipid toxin which leads upon impact at an ultramicroelectrode to the breakdown of the liposomes and the release/electrolysis of its encapsulated redox probe. We present as a proof of concept the sensitive and fast sensing of a submicromolar concentration of Rhamnolipid which is detected after less than 30 minutes of incubation with the liposomes, by the appearing of current spikes in the chronoamperometry measurement.

Electrochemically Promoted Tyrosine-Click-Chemistry for Protein Labeling.

The development of new bio-orthogonal ligation methods for the conjugation of native proteins is of particular importance in the field of chemical biology and biotherapies. In this work, we developed a traceless electrochemical method for protein bioconjugation. The electrochemically promoted tyrosine-click (e-Y-CLICK) allowed the chemoselective Y-modification of peptides and proteins with labeled urazoles. A low potential is applied in an electrochemical cell to activate urazole anchors in situ and on demand, without affecting the electroactive amino acids from the protein. The versatility of the electrosynthetic approach was shown on biologically relevant peptides and proteins such as oxytocin, angiotensin 2, serum bovine albumin, and epratuzumab. The fully conserved enzymatic activity of a glucose oxidase observed after e-Y-CLICK further highlights the softness of the method. The e-Y-CLICK protocols were successfully performed in pure aqueous buffers, without the need for co-solvents, scavenger or oxidizing chemicals, and should therefore significantly broaden the scope of bioconjugation.

Experimental and Theoretical Evidences of p-Type Conductivity in Nickel Carbodiimide Nanoparticles with a Delafossite Structure Type.

Nickel carbodiimide (NiCN2) was synthesized using a two-step precipitation-decomposition route leading to a brown powder with gypsum-flower-like morphology and a large specific surface area (75 m2/g). This layered material crystallizes in the 2H structure type of delafossite (space group P63/mmc), which is built upon infinite 2/∞[NiN2] layers connected by linear carbodiimide ([N═C═N]2-) bridges. An X-ray diffraction Rietveld refinement and thermal analyses pointed out some nickel deficiencies in the material, and band structure calculations carried out on the defect compound predicted p-type conductivity in relation to a slight amount of N2-. This p-type conductivity was demonstrated by electrochemical impedance spectroscopy measurements, and a flat band potential of 0.90 V vs SCE at pH 9.4 was measured. This value, which is more positive than those of CuGaO2 and CuCrO2 delafossite oxides and NiO, prompted us to test NiCN2 nanoparticles as a photocathode in p-type dye-sensitized solar cells.

In situ ultrafast 2D NMR spectroelectrochemistry for real-time monitoring of redox reactions.

The in situ implementation of an electrochemical cell (EC) inside a nuclear magnetic resonance (NMR) spectrometer is extremely powerful to study redox reactions in real time and identify unstable reaction intermediates. Unfortunately, the implementation of an electrochemical device near the sensitive volume of an NMR probe significantly affects the quality of the NMR signal, inducing significant line broadening resulting in peak overlap and partial loss of the multiplet structures. Two-dimensional (2D) NMR spectroscopy allows one to bypass signal overlapping by spreading the peaks along two orthogonal dimensions, while providing precious information in terms of structural elucidation. Nevertheless, the acquisition of 2D NMR data suffers from long acquisition durations which are incompatible with fast redox processes taking place in solution. Here, we present a new approach to deal with this issue, consisting of coupling EC-NMR with ultrafast 2D spectroscopy, capable of recording 2D spectra much faster than conventional 2D NMR. This approach is applied to the real-time monitoring of a model reaction. Fast correlation spectroscopy (COSY) spectra are recorded every 3 min in the course of the 80 min reaction, leading to the unambiguous identification of one reaction intermediate and two reaction products. The evolution of 2D NMR peak volumes in the course of time provides further insight into the mechanism of this reaction involving an unstable intermediate. This study demonstrates the feasibility and the relevance of coupling in situ spectroelectrochemistry with ultrafast 2D spectroscopy to monitor real-time electrochemical reactions in the NMR tube.

Unexpected benzimidazole ring formation from a quinoneimide species in the presence of ammonium acetate as supporting electrolyte used in the coupling of electrochemistry with mass spectrometry.

RATIONALE: Electrochemistry (EC) coupled to mass spectrometry (MS) has been used to study different phase-I reactions. Despite of the versatility of EC/MS, the effect of the nature of the supporting electrolyte on the formation of oxidation products has seldom been discussed during EC/MS experiments. Here, we present a comparison of two different supporting electrolytes and their effect on the identification of unstable intermediate oxidation species is discussed. METHODS: The oxidation of acebutolol was performed with a coulometric cell in the presence of two supporting electrolytes namely ammonium acetate and lithium acetate. Ultra-performance liquid chromatography/quadrupole time-of-flight mass spectrometry (UPLC/QTOFMS) using a binary gradient (water/acetonitrile) with positive electrospray ionization was used to identify the oxidation products in the presence and absence of glutathione. Chemical structure elucidations of the oxidation products were performed by high-resolution mass spectrometry (HRMS) and were also supported by nuclear magnetic resonance (NMR) measurements. RESULTS: From the electrochemical study and HRMS measurements, we demonstrate that the quinoneimide species resulting from the oxidative hydrolyses of acebutolol gives a benzimidazole ring product in the presence of ammonium acetate. Through the example of the oxidation of acebutolol, a correlation between the supporting electrolyte nature and oxidation product formation was established. The obtained results were supported by quantum mechanical calculations. CONCLUSIONS: We present here evidence of the side reactions induced by the presence of ammonia as supporting electrolyte during EC/MS measurements. Acebutolol was used as a model to postulate an uncommon and unexpected side reaction leading to benzimidazole ring formation. The findings may help to understand the identification of the intermediate species in the oxidative degradation process.

Advances in the electrochemical simulation of oxidation reactions mediated by cytochrome p450.

Combining electrochemistry with mass spectrometry constitutes an increasingly useful approach for simulating reactions catalyzed by cytochrome P450 (CYP450). In this review, we discuss the ability of the electrochemical cell to act as a reliable tool to mimic CYP450. The electrochemical oxidation process and CYP450-catalyzed reactions are compared in terms of mechanistic pathways, chemical structures of reactive intermediate metabolites, and final chemical structures of oxidation products. The oxidation reactions mediated by CYP450 are known to occur by either a single electron transfer (SET) or a hydrogen atom transfer (HAT) mechanism. The similarities between the reactions mediated electrochemically or by CYP450 are discussed in terms of SET and HAT mechanisms.

Understanding the behavior of phenylurazole-tyrosine-click electrochemical reaction using hybrid electroanalytical techniques.

In this work, the electrochemical behavior of 4-phenylurazole (Ph-Ur) was studied and the latter was used as a molecular anchor for the electrochemical bioconjugation of tyrosine (Y). Cyclic voltammetry (CV) and controlled potential coulometry (CPC) allowed the in-situ generation of the PTAD (4-phenyl-3 H-1,2,4-triazole-3,5(4 H)-dione) species from phenylurazole on demand for tyrosine electrolabeling. The chemoselectivity of the reaction was studied with another amino acid (lysine, Lys) and no changes in Lys were observed. To evaluate the performance of tyrosine electrolabeling, coulometric analyses at controlled potentials were performed on solutions of phenylurazole and the phenylurazole-tyrosine mixture in different proportions (2:1, 1:1, and 1:2). The electrolysis of the phenylurazole-tyrosine mixture in the ratio (1:2) produced a charge of 2.07 C, very close to the theoretical value (1.93 C), with high reaction kinetics, a result obtained here for the first time. The products obtained were identified and characterized by liquid chromatography coupled to high-resolution electrospray ionization mass spectrometry (LC-HRMS and LC- HRMS2). Two products were formed from the click reactions, one of which was the majority. Another part of this work was to study the electrochemical degradation of the molecular anchor 4-phenylazole (Ph-Ur). Four stable degradation products of phenylurazole were identified (C7H9N2O, C6H8N, C6H8NO, C14H13N4O2) based on chromatographic profiles and mass spectrometry results. The charge generated during the electrolysis of phenylurazole (two-electron process) (2.85 C) is inconsistent with the theoretical or calculated charge (1.93 C), indicating that secondary/parasitic reactions occurred during the electrolysis of the latter. In conclusion, the electrochemically promoted click phenylurazole-tyrosine reactions give rise to click products with high reaction kinetics and yields in the (1:2) phenylurazole-tyrosine ratios, and the presence of side reactions is likely to affect the yield of the click phenylurazole-tyrosine reaction.

Stabilisation of carbon-supported palladium nanoparticles through the formation of an alloy with gold: application to the Sonogashira reaction.

Oh my Gold! Gold atoms stabilise catalytically active palladium nanoparticles when engaged in an alloy heterogenised on carbon. The increased durability makes the Pd-Au/C catalyst more recyclable than the gold-free Pd/C catalyst for the Sonogashira reaction.

In situ NMR spectroelectrochemistry for the structure elucidation of unstable intermediate metabolites.

In situ NMR spectroelectrochemistry is presented in this study as a useful hybrid technique for the chemical structure elucidation of unstable intermediate species. An experimental setting was designed to follow the reaction in real time during the experimental electrochemical process. The analysis of (1)H NMR spectra recorded in situ permitted us (1) to elucidate the reaction pathway of the electrochemical oxidation of phenacetin and (2) to reveal the quinone imine as a reactive intermediate species without using any trapping reaction. Phenacetin has been considered as hepatotoxic at high therapeutic amounts, which is why it was chosen as a model to prove the applicability of the analytical method. The use of 1D and 2D NMR experiments led to the elucidation of the major species produced from the oxidation process. We demonstrated that in situ NMR spectroelectrochemistry constitutes a fast way for monitoring unstable quinone imines and elucidating their chemical structures.

Acebutolol and alprenolol metabolism predictions: comparative study of electrochemical and cytochrome P450-catalyzed reactions using liquid chromatography coupled to high-resolution mass spectrometry.

A comparative study of the electrochemical conversion and the biotransformation performed by the cytochrome P450 (CYP450) obtained by rat liver microsomes has been achieved to elucidate the oxidation mechanism of both acebutolol and alprenolol. For this purpose, a wide range of reactions such as N-dealkylation, O-dealkoxylation, aromatic hydroxylation, benzyl hydroxylation, alkyl hydroxylation, and aromatic hydroxylation have been examined in this study, and their mechanisms have been compared. Most of the results of the electrochemical oxidation have been found to be in accordance with those obtained by incubating acebutolol and alprenolol in the presence of CYP450, i.e., N-dealkylation, benzyl hydroxylation, and O-dealkoxylation reactions catalyzed by liver microsomes were found to be predicted by the electrochemical oxidation. The difficulty for the electrochemical process to mimic both aromatic and alkyl hydroxylation reactions has also been discussed, and the hypothesis for the absence of aromatic hydroxylated and alkyl hydroxylated products, respectively, for alprenolol and acebutolol, under the anodic oxidation has been supported by theoretical calculation. The present study highlights the potential and limitation of coupling of electrochemistry-liquid chromatography-high-resolution mass spectrometry for the study of phase I and phase II reactions of acebutolol and alprenolol.

Electrochemistry coupled with mass spectrometry for the prediction of the environmental fate and elucidation of the degradation mechanisms of pesticides: current status and future prospects.

One of the crucial steps in the development of a new pesticide (active molecule) is predicting its environmental and in vivo fate, so as to determine potential consequences to a living organism's health and ecology as a whole. In this regard, pesticides undergo transformation processes in response to biotic and abiotic stress. Therefore, there is a need to investigate pesticide transformation products (TPs) and the formation processes they could undergo during the manufacturing process and when discharged into the ecosystem. Although methods based on biological in vitro and in vivo experimental models are tools of choice for the elucidation of metabolic pathways of pesticides (xenobiotics in general), electrochemistry-based techniques offer numerous advantages such as rapid and low-cost analysis, easy implementation, low sample volume requirement, no matrix effects, and miniaturization to improve the performance of the developed methods. However, for greater efficiency, electrochemistry (EC) should be coupled with analytical techniques such as mass spectrometry (MS) and sometimes liquid chromatography (LC), leading to the so-called EC-MS and EC-LC-MS hybrid techniques. In this review, past studies, current applications and utilization of EC-MS and EC-LC-MS techniques for the simulation of environmental fate/degradation of pesticides were reviewed by selected studies with chemical transformation, structures of metabolites, and some experimental conditions. The current challenges and future trends for the mimicry and prediction of the environmental fate/degradation of pesticides based on electrochemical methods combined with mass spectrometry were highlighted.

Click-electrochemistry for the rapid labeling of virus, bacteria and cell surfaces.

Methods for direct covalent ligation of microorganism surfaces remain poorly reported, and mostly based on metabolic engineering for bacteria and cells functionalization. While effective, a faster method avoiding the bio-incorporation step would be highly complementary. Here, we used N-methylluminol (NML), a fully tyrosine-selective protein anchoring group after one-electron oxidation, to label the surface of viruses, living bacteria and cells. The functionalization was performed electrochemically and in situ by applying an electric potential to aqueous buffered solutions of tagged NML containing the viruses, bacteria or cells. The broad applicability of the click-electrochemistry method was explored on recombinant adeno-associated viruses (rAAV2), Escherichia coli (Gram-) and Staphyloccocus epidermidis (Gram + ) bacterial strains, and HEK293 and HeLa eukaryotic cell lines. Surface electro-conjugation was achieved in minutes to yield functionalized rAAV2 that conserved both structural integrity and infectivity properties, and living bacteria and cell lines that were still alive and able to divide.

P-type nitrogen-doped ZnO nanoparticles stable under ambient conditions.

Zinc oxide is considered as a very promising material for optoelectronics. However, to date, the difficulty in producing stable p-type ZnO is a bottleneck, which hinders the advent of ZnO-based devices. In that context, nitrogen-doped zinc oxide receives much attention. However, numerous reviews report the controversial character of p-type conductivity in N-doped ZnO, and recent theoretical contributions explain that N-doping alone cannot lead to p-typeness in Zn-rich ZnO. We report here that the ammonolysis at low temperature of ZnO(2) yields pure wurtzite-type N-doped ZnO nanoparticles with an extraordinarily large amount of Zn vacancies (up to 20%). Electrochemical and transient spectroscopy studies demonstrate that these Zn-poor nanoparticles exhibit a p-type conductivity that is stable over more than 2 years under ambient conditions.

Luminol anchors improve the electrochemical-tyrosine-click labelling of proteins.

New methods for chemo-selective modifications of peptides and native proteins are important in chemical biology and for the development of therapeutic conjugates. Less abundant and uncharged amino-acid residues are interesting targets to form less heterogeneous conjugates and preserve biological functions. Phenylurazole (PhUr), N-methylphenylurazole (NMePhUr) and N-methylluminol (NMeLum) derivatives were described as tyrosine (Y) anchors after chemical or enzymatic oxidations. Recently, we developed the first electrochemical Y-bioconjugation method coined eY-click to activate PhUr in biocompatible media. In this work, we assessed the limitations, benefits and relative efficiencies of eY-click conjugations performed with a set of PhUr, NMePhUr and NMeLum derivatives. Results evidenced a high efficiency of NMeLum that showed a complete Y-chemoselectivity on polypeptides and biologically relevant proteins after soft electrochemical activation. Side reactions on nucleophilic or heteroaromatic amino-acids such as lysine or tryptophan were never observed during mass spectrometry analysis. Myoglobine, bovine serum albumin, a plant mannosidase, glucose oxidase and the therapeutically relevant antibody trastuzumab were efficiently labelled with a fluorescent probe in a two-step approach combining eY-click and strain-promoted azide-alkyne cyclization (SPAAC). The proteins conserved their structural integrity as observed by circular dichroism and the trastuzumab conjugate showed a similar binding affinity for the natural HER2 ligand as shown by bio-layer interferometry. Compared to our previously described protocol with PhUr, eY-click with NMeLum species showed faster reaction kinetics, higher (complete) Y-chemoselectivity and reactivity, and offers the interesting possibility of the double tagging of solvent-exposed Y.

Using electrochemistry coupled to high resolution mass spectrometry for the simulation of the environmental degradation of the recalcitrant fungicide carbendazim.

Currently, there is a growing interest in the study of environmental degradation pathways of organic contaminants such as pesticides, with the objective to better understand their potential risk for environmental systems and living organisms. In this context, DFT (conceptual density functional theory) and predictive methods may systematically be used to simplify and accelerate the elucidation of environmental degradation. We report herein the electrochemical behavior/degradation of the carbendazim (CBZ) fungicide widely used to treat cereal and fruit crops. Oxidative degradation of CBZ was studied using an electrochemical flow-through cell directly coupled to a mass spectrometer for rapid identification of CBZ degradation products. The structural elucidation of CBZ oxidation products was based on retention time, accurate mass, isotopic distribution and fragmentation pattern by using LC-HRMS an LC-HRMS2. The most important chemical reactions found to occur in the transformation of CBZ were hydrolysis and hydroxylation. EC-LC-MS and EC-MS analysis has made it possible to highlight the identification of degradation products of CBZ. In addition to previously known transformation products common to those observed during environmental degradation (monocarbomethoxyguanidine, benzimidazole-isocyanate, 2-aminobenzimidazole, hydroxy-2-aminobenzimidazole, hydroxycarbendazim, CBZ-CBZ dimer), two new degradation products were identified in this work: a quinone imine and a nitrenium ion. Electrochemistry mass spectrometry hyphenated techniques represent an accessible, rapid and reliable tool to elucidate the oxidative degradation of CBZ, including reactive degradation products and conjugates.

Electrochemistry-coupled to liquid chromatography-mass spectrometry-density functional theory as a new tool to mimic the environmental degradation of selected phenylurea herbicides.

In vitro and in vivo experimental models, mainly based on cell cultures, animals, healthy humans and clinical trials, are useful approaches for identifying the main metabolic pathways. However, time, cost, and matrix complexity often hinder the success of these methods. In this study, we propose an alternative non-enzymatic method, using electrochemistry (EC) coupled to liquid chromatography (LC) - high resolution mass spectrometry (HRMS) - DFT theoretical calculations (EC/LC-MS/DFT) for the mimicry/simulation of the environmental degradation of phenylurea herbicides, and for the mechanism elucidation of this class of herbicides. Fenuron, monuron, isoproturon, linuron, monolinuron, metoxuron and chlortoluron were selected as relevant model compounds. The intended compounds are oxidized by EC, separated by LC and detected using electrospray ionization HRMS. The main oxidation products were hydroxylated compounds obtained by substitution and addition reactions. Unstable quinone imines/methines, rarely observed by conventional methods, have been identified during the oxidative degradation of phenylurea herbicides for the first time in this study. Some were directly observed and the others were trapped by glutathione GSH. Reactions such as hydrolytic substitutions (-Cl/+OH and -C3H7/+OH and -CH3/+OH and -OCH3/+OH), aromatic hydroxylation, alkyl carbon hydroxylation, dehydrochlorination/dehydromethylation/dehydromethoxylation and conjugation have been successfully mimicked. The obtained results, supported by theoretical calculations, are useful for simulating/understanding and predicting the oxidative degradation pathways of pesticides in the environment.

Solar electricity and fuel production with perylene monoimide dye-sensitised TiO2 in water.

Dye-sensitisation of TiO2 and other metal oxides is an established strategy to couple solar light harvesting with efficient charge separation for the production of electricity in dye-sensitised solar cells (DSCs) or fuels in dye-sensitised semiconductor photocatalysis (DSP). Perylene monoimide (PMI) dyes have emerged as promising organic dyes, but they have not previously been used in a functional assembly with TiO2 in aqueous solution. Here, five novel PMI dyes bearing carboxylic acid, phosphonic acid, acetylacetone, hydroxyquinoline or dipicolinic acid anchoring groups for attachment onto TiO2 are reported. We identified functional DSC and DSP systems with PMI-sensitised TiO2 in aqueous solution, which permitted a side-by-side comparison with respect to performance between the two systems. Structure-activity relationships allowed us to suggest anchor-condition-system associations to suit specific anchoring groups at various pH values, and with different electron mediators (redox couple or sacrificial electron donor) and catalysts in DSC and DSP schemes. A DSC sensitised with the hydroxyquinoline-modified PMI dye reached the highest short-circuit current density (J SC ≈ 1.4 mA cm-2) in aqueous electrolyte solution during irradiation with simulated solar light. This dye also achieved a turnover number (TONPMI) of approximately 4900 for sacrificial proton reduction after 24 h irradiation in a DSP scheme with Pt as a H2-evolving co-catalyst at pH 4.5. This performance was only surpassed by the carboxylic acid-bearing dye, which reached a new benchmark turnover number (TONPMI ≈ 1.1 × 104 after 72 h) for an organic dye in nanoparticulate DSP for solar fuel production. At higher pH (8.5), our results showed that the phosphonic acid group allows for higher performance due to a stronger anchoring ability. This study provides a platform for aqueous PMI dye-sensitised TiO2 chemistry and gives valuable insights into the performance of different anchoring groups in DSC and DSP systems.

Hybrid Azo-fluorophore Organic Nanoparticles as Emissive Turn-on Probes for Cellular Endocytosis.

The development of fluorescent organic nanoparticles, serving as bioimaging agents or drug cargos, represents a buoyant field of investigations. Nevertheless, their ulterior fate and structural integrity after cell uptake remain elusive. Toward this aim, we have elaborated original photoactive organic nanoparticles (dTEM ∼ 35-50 nm wide) with an off-on signal upon cellular internalization. Such nanoparticles are based on the noncovalent association of red-emitting benzothiadiazole (BDZ) derivatives and azo dyes, acting as fluorescence quenchers. Upon varying the azo/BDZ ratio, we found that quantitative emission quenching could be obtained with only a 0.2:1 azo/BDZ ratio and originated from exergonic oxidative and reductive photoinduced electron transfer from the azo units (ΔelG0 = -0.21 and -0.29 eV, respectively). Such results revisited the origin of emission quenching, often confusedly ascribed to Förster resonance energy transfer. A nonlinear and sharp drop of the emission intensity with the increase in the azo unit density n was observed and presents comparable evolution to a n-1/3 mathematical law. Thorough biological examinations involving cancer cells prove a receptor-independent endocytosis pathway, leading to progressive cell lighting upon nanoparticle accumulation in the late endosomal/lysosomal compartments. Complete emission recovery of the initially quenched azo/BDZ nanosystems could be achieved by using mefloquine, which caused endosomal/lysosomal disruption, and release of their content in the cytoplasm. Such results demonstrate that the dotlike emission from endosomes actually stems from fully dissociated individual dyes and not integer nanoparticles. They conclude on the high spatial confinement promoted by organelles and finally question its severe impact on functional compounds or nanoparticles whose properties are strongly distance dependent.