RESUMO
The rapid evolution of 5G and beyond technologies has sparked an unprecedented surge in the need for networking infrastructure that can deliver high speed, minimal latency, and remarkable flexibility. The programmable data plane, which enables the dynamic reconfiguration of network functions and protocols, is becoming increasingly important in meeting these requirements. This paper provides an overview of the current state of the art in programmable data planes implemented in 5G and beyond architectures. It proposes a classification of the reviewed studies based on system architecture and specific use cases. Furthermore, the article surveys the primary applications of programmable devices in emerging telecommunication networks, such as tunneling and forwarding, network slicing, cybersecurity, and in-band telemetry. Finally, this publication summarizes the open research challenges and future directions. In addition to offering a comprehensive review of programmable data plane applications in telecommunication networks, this article aims to guide further research in this promising field for network operators and researchers alike.
RESUMO
Body-size is significantly correlated with the number of vertebrae (pleomerism) in multiple vertebrate lineages, indicating that somitogenesis process is an important factor dictating evolutionary change associated to phyletic allometry and, consequently, species fitness and diversification. However, the role of the evolution of extreme body sizes (dwarfism and gigantism) remains elusive in snakes, mainly with respect to postnatal ontogeny in dietary preferences associated with evolution of gigantism in many lineages. We described herein a new species in the highly diversified and species-rich genus Atractus on the basis of four specimens from the southeastern slopes of the Ecuadorian Andes. The new species is morphologically similar and apparently closely related to two other allopatric giant congeners (A. gigas and A. touzeti), from which it can be distinguished by their distinct dorsal and ventral coloration, the number of supralabial and infralabial scales, the number of maxillary teeth, and relative width of the head. In addition, we discuss on the ontogenetic trajectories hypotheses and dietary specializations related to evolution of gigantism in the goo-eaters genus Atractus.
Assuntos
Tamanho Corporal , Comportamento Alimentar/fisiologia , Serpentes/anatomia & histologia , Animais , Evolução Biológica , Equador , Feminino , Serpentes/classificação , Serpentes/fisiologiaRESUMO
The use of concrete-recycled aggregates to produce high-performance concrete is limited by insufficient correlation between resulting microstructure and its influence on mechanical performance reproducibility. This work addresses this issue in a sequential approach: concrete microstructure was systematically analyzed and characterized by scanning electron microscopy and results were correlated with concrete compressive strength and water absorption ability. The influence of replacing natural aggregates (NA) with recycled concrete aggregates (RCA), with different source concrete strength levels, of silica fume (SF) addition and of mixing procedure was tested. The results show that the developed microstructure depends on the concrete composition and is conditioned by the distinct nature of NA, recycled aggregates from high-strength source concrete, and recycled aggregates from low-strength source concrete. SF was only effective at concrete densification when a two-stage mixing approach was used. The highest achieved strength in concrete with 100% incorporation of RCA was 97.3 MPa, comparable to that of conventional high-strength concrete with NA. This shows that incorporation of significant amounts of RCA replacing NA in concrete is not only a realistic approach to current environmental goals, but also a viable route for the production of high-performance concrete.
RESUMO
Aneurysms of the pulmonary arteries and trunk are rare entities. The Waterston shunt is a palliative procedure for children with cyanotic CHD due to obstruction of the pulmonary outflow. Described complications are distortion of the pulmonary artery and pulmonary arterial hypertension. We report a patient with a giant right pulmonary artery aneurysm in relation to a Waterston shunt.
Assuntos
Aneurisma/diagnóstico , Artéria Pulmonar , Circulação Pulmonar/fisiologia , Malformações Vasculares/diagnóstico , Adulto , Aneurisma/complicações , Aneurisma/fisiopatologia , Angiografia , Humanos , Masculino , Pressão Propulsora Pulmonar/fisiologia , Malformações Vasculares/complicações , Malformações Vasculares/fisiopatologiaRESUMO
PURPOSE OF REVIEW: Cross-sectional imaging, namely ultrasound, CT and MR enterography, complements clinical and endoscopic monitoring of activity and complications in IBD, and emerging new radiological technologies may have clinical applications in the near future. This review offers an update on the potential role of these new imaging methods in the management of IBD. RECENT FINDINGS: Specific MR techniques [diffusion-weighted imaging (DWI), diffusion kurtosis imaging (DKI) and magnetization transfer] allow accurate detection of inflammation (DWI and maybe DKI) and fibrosis (magnetization transfer) in Crohn's disease, without the need of intravenous gadolinium administration. ultrasonography developments (elastography, contrast-enhanced ultrasonography, small intestine contrast ultrasonography and multispectral optoacoustic tomography) are promising techniques for evaluation of fibrosis (elastography) and inflammation (contrast ultrasonography). Dose-reduction techniques in CT allow similar quality imaging and diagnostic accuracy with lower radiation exposure. Hybrid imaging (PET/MR and PET/CT) hold promise for grading inflammation in Crohn's disease. SUMMARY: The potential benefits of new cross-sectional imaging techniques in IBD include better inflammation grading, such as identification of mild degree of activity, which may be relevant whenever assessing response to treatment and, of uttermost importance, accurate preoperative detection and grading of fibrosis in stricturing Crohn's disease, facilitating surgical vs. medical therapeutic decisions.
Assuntos
Endoscopia do Sistema Digestório , Inflamação/diagnóstico por imagem , Doenças Inflamatórias Intestinais/diagnóstico por imagem , Intestino Delgado/diagnóstico por imagem , Imageamento por Ressonância Magnética , Tomografia Computadorizada por Raios X , Ultrassonografia , Endoscopia do Sistema Digestório/métodos , Humanos , Processamento de Imagem Assistida por Computador , Inflamação/patologia , Doenças Inflamatórias Intestinais/patologia , Intestino Delgado/patologia , Imageamento por Ressonância Magnética/tendências , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada , Reprodutibilidade dos Testes , Tomografia Computadorizada por Raios X/tendências , Ultrassonografia/tendênciasRESUMO
This paper intends to analyze the microstructure of concrete with recycled aggregates (RA) from construction and demolition waste from various Portuguese recycling plants. To that effect, several scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analyses were performed. Various concrete mixes were evaluated in order to analyze the influence of the RA's collection point and consequently of their composition on the mixes' characteristics. Afterward all the mixes were subjected to the capillary water absorption test in order to quantitatively evaluate their porosity. Results from the SEM/EDS analysis were compared with those from capillary water absorption test. The SEM/EDS analysis showed that the bond capacity of aggregates to the new cement paste is greatly influenced by the RA's nature. On the other hand, there was an increase in porosity with the incorporation of RA.
RESUMO
In this paper the characterization of a gypsum plaster sample from the end of the 19th century simulating imperial red porphyry using a multi-analytical approach is presented and discussed. The results of X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TGA-DTA), physical and mechanical properties are summarized. In order to have further insight into the microstructure, polarized light microscopy (PLM), scanning electron microscopy coupled with energy dispersive X-ray spectrometer (SEM-EDS), and micro Raman spectroscopy analyzes were also made. They helped to clarify the main issues raised by the other complementary analytical techniques and allowed the establishment of interrelations between the different properties, providing important information about the materials, the skills, and the technological development involved in the art of imitating noble stones with gypsum pastes. This study also contributes to our knowledge concerning the preservation of these types of elements that are important in the context of European decorative arts and rarely reported in the literature.
RESUMO
Several authors have reported the workability, mechanical properties, and durability of concrete produced with construction waste replacing the natural aggregate. However, a systematic microstructural characterization of recycled aggregate concrete has not been reported. This work studies the use of fine recycled aggregate to replace fine natural aggregate in the production of concrete and reports the resulting microstructures. The used raw materials were natural aggregate, recycled aggregate obtained from a standard concrete, and Portland cement. The substitution extent was 0, 10, 50, and 100 vol%; hydration was stopped at 9, 24, and 96 h and 28 days. Microscopy was focused on the cement/aggregate interfacial transition zone, enlightening the effect of incorporating recycled aggregate on the formation and morphology of the different concrete hydration products. The results show that concretes with recycled aggregates exhibit typical microstructural features of the transition zone in normal strength concrete. Although overall porosity increases with increasing replacement, the interfacial bond is apparently stronger when recycled aggregates are used. An addition of 10 vol% results in a decrease in porosity at the interface with a corresponding increase of the material hardness. This provides an opportunity for development of increased strength Portland cement concretes using controlled amounts of concrete waste.
RESUMO
The construction industry is one of the biggest and most active sectors of the European Union (EU), consuming more raw materials and energy than any other economic activity. Furthermore, construction waste is the commonest waste produced in the EU. Current EU legislation sets out to implement construction and demolition waste (CDW) prevention and recycling measures. However it lacks tools to accelerate the development of a sector as bound by tradition as the building industry. The main objective of the present study was to determine indicators to estimate the amount of CDW generated on site both globally and by waste stream. CDW generation was estimated for six specific sectors: new residential construction, new non-residential construction, residential demolition, non-residential demolition, residential refurbishment, and non-residential refurbishment. The data needed to develop the indicators was collected through an exhaustive survey of previous international studies. The indicators determined suggest that the average composition of waste generated on site is mostly concrete and ceramic materials. Specifically for new residential and new non-residential construction the production of concrete waste in buildings with a reinforced concrete structure lies between 17.8 and 32.9 kg m(-2) and between 18.3 and 40.1 kg m(-2), respectively. For the residential and non-residential demolition sectors the production of this waste stream in buildings with a reinforced concrete structure varies from 492 to 840 kg m(-2) and from 401 to 768 kg/m(-2), respectively. For the residential and non-residential refurbishment sectors the production of concrete waste in buildings lies between 18.9 and 45.9 kg/m(-2) and between 18.9 and 191.2 kg/m(-2), respectively.
Assuntos
Indústria da Construção/estatística & dados numéricos , Materiais de Construção/estatística & dados numéricos , Resíduos Industriais/análise , Cerâmica , Indústria da Construção/legislação & jurisprudência , Indústria da Construção/métodos , União Europeia , Habitação , Resíduos Industriais/legislação & jurisprudênciaRESUMO
In this research, the durability performance of sustainable concrete with the incorporation of reactive magnesium oxide (MgO) and fly ash (FA) was evaluated. The partial replacement of cement with these two materials is an appealing solution for the construction sector due to sustainability benefits and shrinkage reduction. The incorporation of FA by partial replacement of cement was carried out at 0%, 15% and 30%. The incorporation of MgO in concrete was carried out at 0%, 5%, 10% and 20%. Two types of MgO were used, one from Australia and another of Spanish origin. These two materials were evaluated in terms of their individual incorporation, and then an evaluation was carried out when the two were simultaneously used. In terms of durability, performance losses between 3% and 95% were obtained in all tests (water absorption by capillarity and immersion, carbonation depth and resistance to chloride penetration). However, over time, the difference in performance relative to the reference concrete tends to decrease due to the slow hydration that characterizes these two alternative materials. It was found that, in most of the tests, no overlapping of the negative effects occurred. In other words, the simultaneous incorporation of MgO and FA caused performance losses lower than the sum of the losses of their individual incorporation.
RESUMO
In the construction industry, cement is the most widely used material. So, to achieve greater sustainability in this industry, it is imperative to improve the sustainability of this material. One way to reduce the ecological footprint of cement is to replace it, even if partially, with other more sustainable materials that can act as binders. This paper analyses the mechanical properties of more sustainable mortars containing recycled cement (RC), fly ash (FA), and magnesium oxide (MgO). Different types of binary, ternary, and quaternary mortars were used: containing recycled cement (5% and 10%), fly ash (10% and 20%), and MgO (7.5% and 15%). An experimental campaign was carried out analysing air content, density, compressive and flexural strengths, modulus of elasticity, and ultrasonic pulse velocity. The ternary mortars showed decreases between 0.4% (M-5RC10FA) and 35.3% (M-10RC15Mg) in terms of compressive strength at 365 days (compared to RM), when the theoretically expected decrease (the sum of the decreases obtained with the individual incorporation of these materials) would be between 16.6% and 41.5%, respectively. The results obtained allow for concluding that the joint use of these materials in ternary mortars improves the mechanical capacity, relative to the individual incorporation of each material in binary mortars.
RESUMO
This paper presents a literature review on the effects of accelerated carbonation on alkali-activated materials. It attempts to provide a greater understanding of the influence of CO2 curing on the chemical and physical properties of various types of alkali-activated binders used in pastes, mortars, and concrete. Several aspects related to changes in chemistry and mineralogy have been carefully identified and discussed, including depth of CO2 interaction, sequestration, reactions with calcium-based phases (e.g., calcium hydroxide and calcium silicate hydrates and calcium aluminosilicate hydrates), as well as other aspects related to the chemical composition of alkali-activated materials. Emphasis has also been given to physical alterations such as volumetric changes, density, porosity, and other microstructural properties caused by induced carbonation. Moreover, this paper reviews the influence of the accelerated carbonation curing method on the strength development of alkali-activated materials, which has been awarded little attention considering its potential. This curing technique was found to contribute to the strength development mainly through decalcification of the Ca phases existing in the alkali-activated precursor, leading to the formation of CaCO3, which leads to microstructural densification. Interestingly, this curing method seems to have much to offer in terms of mechanical performance, making it an attractive curing solution that can compensate for the loss in performance caused by less efficient alkali-activated binders replacing Portland cement. Optimising the application of such CO2-based curing methods for each of the potential alkali-activated binders is recommended for future studies for maximum microstructural improvement, and thus mechanical enhancement, to make some of the "low-performing binders" adequate Portland cement substitutes.
RESUMO
Water is a crucial resource for life, and it is increasingly scarce in many regions of the globe. In addition, retail water use is responsible for up to 19% of public water globally supplied. Hence, this study has set out to explore the technical and economic feasibility of rainwater harvesting systems as an alternative water source for a retail store located in southern Portugal. Water consumption data from 2018 to 2021 was collected from water bills, placing average monthly water consumption at around 400 m3. Next, rainfall data was collected from the nearest meteorological station, comprising 54 years of daily rainfall data between 1932 and 2008 with an annual average of 685 mm. The simulation of a rainwater harvesting system was performed, resorting to the mass-balance model. The optimal tank size was found to be 100 m3 considering simply the relation with the relative water savings variation on the graph relating the water savings with the tank size. Results show that the simulated rainwater harvesting system would allow saving 32-36% of the water consumed, despite the store's location in a dry climate, representing a financial gain of 330-372 per month. Findings suggest a substantial potential for the technical and economic feasibility of rainwater systems in retail stores, which makes them relevant solutions to achieve important water-savings in the retail sector, thus positively influencing retailers' direct water footprint.
Assuntos
Conservação dos Recursos Naturais , Abastecimento de Água , Conservação dos Recursos Naturais/métodos , Portugal , Chuva , ÁguaRESUMO
Construction and demolition waste (CDW) from earthquake rubbles was used here as recycled aggregates (RA) in cementitious binders. The materials were sorted in six groups: concrete (CO), natural stone (NS), tile (TI), brick (BR), perforated brick (PF) and roof tile (RT). The abundance (wt.%) of crystalline phases in each RA type was determined by X-ray Powder Diffraction (XRPD). Each group of RAs was used alone (100 wt.% of RA) and mixed with quartz-rich virgin aggregates (VA) to prepare 13 types of mortars (12 specimens per type): one reference mortar (RM) with only VA, six recycled aggregate mortars (RAM) and six recycled-plus-virgin aggregate mortars (RVAM). The physical and mechanical properties of aggregates and mortars reflect the type and abundance of crystalline phases in each CDW group. Recycled mortars rich in concrete, natural stones and tiles have better mechanical performance than mortars prepared with recycled bricks, perforated bricks and roof tiles. For each RA, RVAMs have superior mechanical characteristics than the corresponding RAM. Since the type and amount of phases contained in recycled aggregates strongly control the mechanical performance of new construction materials, they should be routinely quantified as reported here, in addition to other physical features (water absorption, density, etc.). The separation of heterogeneous CDW into homogeneous RA groups is necessary for the production of new construction materials with stable and predictable performances to ensure CDW recycling, especially in areas hit by major adverse events, where large amounts of still valuable materials could be used for reconstruction processes.
RESUMO
Three industrial aluminosilicate wastes were studied as precursors to produce alkali-activated concrete: (i) electric arc furnace slag, (ii) municipal solid waste incineration bottom ashes, and (iii) waste glass rejects. These were characterized via X-ray diffraction and fluorescence, laser particle size distribution, thermogravimetric, and Fourier-transform infrared analyses. Distinctive combinations of anhydrous sodium hydroxide and sodium silicate solution were tried by varying the Na2O/binder ratio (8%, 10%, 12%, 14%) and SiO2/Na2O ratio (0, 0.5, 1.0, 1.5) to find the optimum solution for maximized mechanical performance. Specimens were produced and subjected to a three-step curing process: (1) 24 h thermal curing (70 °C), (2) followed by 21 days of dry curing in a climatic chamber (~21 °C, 65% RH), and (3) ending with a 7-day carbonation curing stage (5 ± 0.2% CO2; 65 ± 10% RH). Compressive and flexural strength tests were performed, to ascertain the mix with the best mechanical performance. The precursors showed reasonable bonding capabilities, thus suggesting some reactivity when alkali-activated due to the presence of amorphous phases. Mixes with slag and glass showed compressive strengths of almost 40 MPa. Most mixes required a higher Na2O/binder ratio for maximized performance, even though, contrary to expectations, the opposite was observed for the SiO2/Na2O ratio.
RESUMO
Neacomys is a genus of small spiny or bristly sigmodontine rodents that are common components of mammalian faunas in multiple biomes on Central and South America. Recent studies on this group have demonstrated that there is cryptic diversity yet to be discovered within currently recognized species that have not received comprehensive revisions, as well as in areas that have been overlooked. Here we ratify this assertion by describing a new species previously misidentified as the Narrow-footed Spiny Mouse (Neacomystenuipes) from the Chocó biogeographic region in northwestern Ecuador, Neacomysmarci Brito & Tinoco, sp. nov. Distinctiveness of this entity is supported by the combination of the following morphological characters: small size (head-body length 65-85 mm); long tail (69-126% longer than head-body length); pale buff-colored but gray-based belly fur; white throat; hypothenar pad usually absent; long nasals; and a condylar process higher than the coronoid process. Likewise genetic distance analyses and phylogenetic reconstructions based on cytochrome-b (Cytb) sequence data indicate a clear divergence from typical populations of N.tenuipes, and a sister relationship between them. The results presented here increase the diversity of Neacomys to 24 species, placing it among the most diverse genera within the sigmodontine rodents.
RESUMO
Ichthyomyini, a morphologically distinctive group of Neotropical cricetid rodents, lacks an integrative study of its systematics and biogeography. Since this tribe is a crucial element of the Sigmodontinae, the most speciose subfamily of the Cricetidae, we conducted a study that includes most of its recognized diversity (five genera and 19 species distributed from southern Mexico to northern Bolivia). For this report we analyzed a combined matrix composed of four molecular markers (RBP3, GHR, RAG1, Cytb) and 56 morphological traits, the latter including 15 external, 14 cranial, 19 dental, five soft-anatomical and three postcranial features. A variety of results were obtained, some of which are inconsistent with the currently accepted classification and understanding of the tribe. Ichthyomyini is retrieved as monophyletic, and it is divided into two main clades that are here recognized as subtribes: one to contain the genus Anotomys and the other composed by the remaining genera. Neusticomys (as currently recognized) was found to consist of two well supported clades, one of which corresponds to the original concept of Daptomys. Accordingly, we propose the resurrection of the latter as a valid genus to include several species from low to middle elevations and restrict Neusticomys to several highland forms. Numerous other revisions are necessary to reconcile the alpha taxonomy of ichthyomyines with our phylogenetic results, including placement of the Cajas Plateau water rat (formerly Chibchanomys orcesi) in the genus Neusticomys (sensu stricto), and the recognition of at least two new species (one in Neusticomys, one in Daptomys). Additional work is necessary to confirm other unanticipated results, such as the non-monophyletic nature of Rheomys and the presence of a possible new genus and species from Peru. Our results also suggest that ichthyomyines are one of the main Andean radiations of sigmodontine cricetids, with an evolutionary history dating to the Late Miocene and subsequent cladogenesis during the Pleistocene.
Assuntos
Arvicolinae , Sigmodontinae , Animais , Filogenia , Evolução Biológica , PeruRESUMO
We describe six new species of rainfrogs of the genus Pristimantis (Strabomantidae) from Amazonian cloud forests in Ecuador. We also present a phylogeny showing the relationships of the new species. The phylogeny is based on mitochondrial genes 16S rRNA (16S), 12 rRNA (12S), NADH-ubiquinone oxidoreductase chain 1 (ND1) and the nuclear gene recombination-activating 1 (RAG1). We also describe the osteology of two of the new species using high-resolution x-ray computed tomography. The new species belong to two clades. The first clade is sister to the subgenus Huicundomantis and includes P. tamia sp. nov., P. miktos, and P. mallii. Pristimantis tamia sp. nov. is morphologically similar to P. miktos, P. mallii, P. martiae, and P. incomptus, but differs from them by lacking vocal slits and tympanic membrane and by having light greenish blue iris. Based in our results we expand the subgenus Huicundomantis to include the P. miktos species group. The second clade is remarkable by being highly divergent and consisting exclusively of new species: P. anaiae sp. nov., P. glendae sp. nov., P. kunam sp. nov., P. resistencia sp. nov., and P. venegasi sp. nov. The new species resemble P. roni, P. yanezi, P. llanganati, P. katoptroides, P. verecundus, and P. mutabilis but can be distinguished from them by lacking vocal slits and tympanic membrane and by having large dark round areas with thin clear borders in the sacral region. All six new species occur in the eastern slopes of the Ecuadorian Andes and are known from a single locality in Llanganates or Sangay National Park. We recommend assigning all of them to the Data Deficient (DD) Red List category. Based in our high-resolution x-ray tomographies, we report the presence of structures that appear to be intercalary elements. This would be the first report of such structures in Terrarana.
Assuntos
Anuros , Gênero Iris , Animais , Equador , Anuros/anatomia & histologia , Parques Recreativos , RNA Ribossômico 16S , Distribuição Animal , Florestas , Gênero Iris/genética , Sciuridae/genéticaRESUMO
The main factor that alters the quality of recycled concrete aggregate (RCA) is the paste adhered to the natural aggregate (NA). Since it causes weakening of the interfacial transition zone (ITZ) between the aggregate and the cementitious paste, it becomes a determining factor for the mechanical behavior of concrete. It turns out that it is critical to enhance this interface by improving the surface of the aggregate or by removing the paste adhered to the NA. Considering the variety of methods for removing paste adhered to RCA-namely using acids such as hydrochloric acid (HCl), sulfuric acid (H2SO4), and phosphoric acid (H3PO4), among others-this paper presents a review of treatments for the removal of adhered paste using acidic solutions on the RCA, and their influence on the mechanical properties and durability of concrete produced with RCA. Pearson's correlation was used in the statistical analysis to determine the linear relationship of the main factors-for instance, immersion time, acidic solution, and aggregate size-involved in the removal of the paste in the RCA.
RESUMO
Due to environmental concerns, the search for sustainable construction solutions has been increasing over the years. This global concern is creating a trend in the use of recycled aggregates resulting from construction and demolition wastes from different sources. In addition to their physical and mechanical properties, it is important to analyse their ecotoxicological risk to determine whether their leachates might be an issue. To assess ecotoxicity, biological tests should be performed for different trophic levels. This type of test is expensive and needs a high level of expertise, which leads to a lack of studies on recycled aggregates including ecotoxicity analysis. This paper presents a set of predictive ecotoxicity results based on the published studies on recycled aggregates. These results are the outcome of applying an innovative methodology previously developed and validated by the authors aiming to foresee the ecotoxicological fate of building materials' constituents and products. The application of this methodology enables the classification of a recycled aggregate product as safe or unsafe in terms of ecotoxicity risk, while keeping biological testing to a minimum.