RESUMO
Pencil drawing is one of the simplest and most cost-effective ways of fabricating miniaturized electrodes on a paper substrate. However, it is limited by the lack of reproducibility regarding the electrode drawing process. A 3D-printed pencil holder (3DPH) is proposed here for simple, reproducible, and low-cost hand-drawn fabrication of paper-based electrochemical devices. 3DPH was designed to keep pressure and angulation of the graphite mine constant on the paper substrate using a micromechanical pencil regardless of the user/operator. This approach significantly improved the reproducibility and cost of making reliable pencil-drawn electrodes. The results showed high reproducibility and accuracy of the 3DPH-assisted electrodes prepared by 4 different operators in terms of sheet resistance and electrochemical behavior. Cyclic voltammetric (CV) curves in the presence of [Fe(CN)6]3-/4- redox probe showed only 3.9% variation for the anodic peak currents of different electrodes prepared by different operators when compared with electrodes prepared without the 3D-printed support. SEM analyses revealed a more uniform graphite deposition/design of the electrodes prepared with 3DPH, which corroborates the results obtained by CV. As a proof of concept, 3DPH-assisted pencil-drawn graphite electrodes were employed for dopamine detection in synthetic saliva, showing a proportional increase in anodic peak current at 0.12 V vs. carbon pRE with increasing dopamine (DA) concentration, with a detection limit of 0.39µmol L-1. Moreover recovery was in the range 93-104% of DA (4-7% RSD) in synthetic saliva for three different concentrations, demonstrating the reliability of the approach. Finally, we believe this approach can make pencil-drawn technology more robust, accessible, reliable, and inexpensive for real on-site applications, especially in hard-to-reach locations or research centers with little investment.
RESUMO
Gold (Au0) and silver (Ag0) nanoparticles were synthesized using tannic acid (TA) as both reducing and stabilizer. Nanoparticles formation, stability, and interaction with TA were compared to citrate-coated nanoparticles and monitored by UV-Vis, zeta potential, and transmission electron microscopy. TA coating resulted in a red-shift and broadening of bands compared to citrate-coated nanoparticles (NPs-Cit). AgNPs-TA and AuNPs-TA are negatively charged with mean surface charge of -29.4 mV and -29.6 mV, respectively. TEM images showed polydispersety of AuNPs-TA (6-42 nm) and aggregation of AgNPs-TA (12-71 nm). In vitro assays of Leishmania amazonensis promastigotes showed an increment of antileishmanial activity for AgNPs-TA in relation to AgNPs-Cit, while AuNPs-TA and AuNPs-Cit did not affect the protozoas at tested concentrations. CC50 value for AgNPs-TA suggested that TA attenuates nanosilver toxicity comparatively to its precursor (Ag+). This investigation can contribute to the development of new, green, and fast produced drugs aiming at leishmaniasis treatment.
Assuntos
Antiprotozoários/farmacologia , Compostos de Ouro/farmacologia , Macrófagos Peritoneais/efeitos dos fármacos , Nanopartículas Metálicas/toxicidade , Compostos de Prata/farmacologia , Taninos/farmacologia , Animais , Antiprotozoários/química , Antiprotozoários/isolamento & purificação , Feminino , Compostos de Ouro/química , Nanopartículas Metálicas/química , Camundongos , Camundongos Endogâmicos BALB C , Microscopia Eletrônica de Transmissão , Testes de Sensibilidade Parasitária , Compostos de Prata/química , Taninos/química , Testes de Toxicidade/métodosRESUMO
Supramolecular self-assembly has been demonstrated to be a useful approach to developing new functional nanomaterials. In this work, we used a cobalt Prussian blue analogue (PBA, Co3[Co(CN)6]2) compound and a ß-cyclodextrin (CD) macrocycle to develop a novel host-guest PBA-CD nanomaterial. The preparation of the functional magnetic material involved the self-assembly of CD molecules onto a PBA surface by a co-precipitation method. According to transmission electronic microscopy results, PBA-CD exhibited a polydisperse structure composed of 3D nanocubes with a mean edge length of 85 nm, which became shorter after CD incorporation. The supramolecular arrangement and structural, crystalline and thermal properties of the hybrid material were studied in detail by vibrational and electronic spectroscopies and X-ray diffraction. The cyclic voltammogram of the hybrid material in a 0.1 mol · L(-1) NaCl supporting electrolyte exhibited a quasi-reversible redox process, attributed to Co2+/Co3+ conversion, with an E1/2 value of 0.46 V (vs. SCE), with higher reversibility observed for the system in the presence of CD. The standard rate constants for PBA and PBA-CD were determined to be 0.07 and 0.13 s(-1), respectively, which suggests that the interaction between the nanocubes and CD at the supramolecular level improves electron transfer. We expect that the properties observed for the hybrid material make it a potential candidate for (bio)sensing designs with a desirable capability for drug delivery.
Assuntos
Cobalto/química , Ciclodextrinas/química , Ferrocianetos/química , Nanopartículas/química , Compostos Organometálicos/síntese química , Compostos Organometálicos/química , Oxirredução , PolimerizaçãoRESUMO
Cashew gum (CG) biopolymer is from natural source, biocompatible, non-toxic, inexpensive, and easily extracted from the exudate of the Anacardium occidentale L. tree, which is abundant in the north and northeast of Brazil. Prussian blue nanoparticles (PBNPs) can be embedded in the natural materials and have been used in several (bio)technological applications. This work presents a new cashew gum-based bionanocomposite containing PBNPs prepared in situ (PBNPs@GC), where the CG biopolymer was used as a matrix to prevent nanoparticles aggregation. Herein, investigate the effect of different CG concentrations about the bionanocomposite properties, and demonstrated it use as potential electrochemical sensor for drugs trials. The PBNPs@CG were characterized using UV-Vis, FTIR, XRD, DLS, zeta potential, TEM and cyclic voltammetry. The CG proved to be a suitable host for the PBNPs synthetized. These PBNPs were spherical, crystalline, stable, with a size of 5.0-15.0 nm, and without agglomeration. The bionanocomposite electrochemical behavior shown their ability to the oxidize some drugs, such as metamizole (MTM), acetaminophen (ACT) and methotrexate (MTX). These results demonstrated the innovative character of these bionanocomposite and encourage their further exploration for applications in nanobiomedicine like electrochemical (bio)sensors.
Assuntos
Anacardium/química , Técnicas Eletroquímicas , Ferrocianetos/química , Nanocompostos/química , Gomas Vegetais/químicaRESUMO
Flowers-like ZnO structures were synthesized using Arabic Gum (AGZnO) or Karaya Gum (KGZnO). The AGZnO and KGZnO were characterized by X-ray diffractometry, Fourier Transformed Infrared, Scanning Electron Microscopy, Photoluminescence, nitrogen adsorption/desorption and diffuse reflectance techniques. The materials were tested in the discoloration of Methylene Blue (MB) dye under visible light and scavenger studies were also performed. The toxicity of the MB irradiated was investigated in bioassays with Artemia salina. The structural characterization demonstrated the formation of hexagonal ZnO. All samples presented flower-like morphology with presence of mesopores identified by BET method. The optical properties indicated band gap of 2.99 (AGZnO) and 2.76 eV (KGZnO), and emission in violet, blue and green emissions also were observed. The KGZnO demonstrated better photocatalytic performance than the AGZnO, and scavenger studies indicated that OH radicals are the main species involved in the degradation of the pollutant model. The photodiscoloration of MB solution did not demonstrate toxicity. Therefore, KGZnO is a promising material for photocatalysis application.
Assuntos
Artemia/crescimento & desenvolvimento , Goma Arábica/química , Goma de Karaya/química , Azul de Metileno/análise , Óxido de Zinco/química , Adsorção , Animais , Artemia/efeitos dos fármacos , Catálise , Química Verde , Luz , Teste de Materiais , Microscopia Eletrônica de Varredura , Estrutura Molecular , Fotólise , Difração de Raios X , Óxido de Zinco/farmacologiaRESUMO
A new hybrid bionanomaterial composed of zinc oxide nanoparticles (ZnO NPs) and chitosan was constructed after enzymatic immobilization of papain for biomedical applications. In this work, we report the preparation and characterization steps of this bionanomaterial and its biocompatibility in vitro. The properties of the immobilized papain system were investigated by transmission electron microscopy, zeta potential, DLS, UV-vis absorption spectroscopy, FTIR spectroscopy, and X-ray diffraction. The prepared bionanomaterial exhibited a nanotriangular structure with a size of 150 nm and maintained the proteolytic activity of papain. In vitro analyses demonstrated that the immobilized papain system decreased the activation of phagocytic cells but did not induce toxicity. Based on the results obtained, we suggest that the novel bionanomaterial has great potential in biomedical applications in diseases such as psoriasis and wounds.