RESUMO
The impact of an oil droplet on a water surface has been explored with the aid of computational fluid dynamics simulations. The study reveals the details of the spatiotemporal evolution of such a ternary system with a triplet of interfaces, e.g., air-water, oil-water, and oil-air, when the impact velocity of the oil droplet with the water surface is high. The oil droplet is found to flatten, spread, stretch, and eventually dewet on the water surface of the deep crater to show a host of interesting post-impact flow morphologies. Furthermore, at higher impact velocities, the formation of a biphasic oil-water crown is observed followed by the ejection of secondary water droplets from the crown tip due to capillary instability. The rapidly spreading oil film on the "crater" of the water surface is found to undergo Kelvin-Helmholtz instability before dewetting the same due to cohesion failure. Subsequently, the formation of an array of secondary oil droplets is observed during the process of dewetting. The dominant wavelength evaluated from the linear stability analysis of a representative flow system could faithfully predict the simulated spacing of dewetted oil droplets floating on the crater. Importantly, the variations in Laplace pressure around the curvatures of the undulatory interfaces along with sharp viscosity gradients across the three-phase contact line is found to engender interesting recirculation patterns, which eventually shed to form a coherent wake region in air near the crater. We also uncover the conditions under which the counter-rotating vortices shed along the oil-water interface resembling a von Kármán vortex street.
RESUMO
Experimental investigations with high-speed imaging reveal that two unequal sized oppositely charged droplets suspended in an insulating oil can come in contact in an asymmetric manner under an electric field. The approaching poles of the droplets undergo asymmetric "cone-cone" to "cone-groove" deformations during noncoalescence under an electric field. Nonlinear three-dimensional simulations confirm the occurrence of a third "groove-groove" configuration at close proximity. A general linear stability analysis confirms the cone-cone to cone-groove transitions of the oil-water interfaces with decreasing thickness of the oil film. Experiments together with simulations confirm the bifurcation of the Taylor cone on the smaller droplet into a number of liquid "tentilla" bridges prior to contact with the bigger droplet. Simulations also predict that the length scales of the formation of such tentillar bridges from the initial Taylor cone match well with the predictions from the nonlinear bifurcation theory.
RESUMO
We computationally explore the effects of pre-impact shape of an oil droplet on the spatiotemporal dynamics after the droplet impacts an air-water interface. Simulations reveal that the initial shape of the impacting oil-droplet alters the post-impact transient flow structures during the evolution. The spherical and oblate drop spreads over the crater to manifest interesting flow morphologies including the formation of oil-toroids and compound oil-droplets. However, the prolate drop impinges much deeper into the water pool after impact to create a few more exclusive flow features, such as, interface overturning, vortex shedding and formation of secondary droplets. The temporal variation of the crater depth shows distinct three stage dynamics, which can be explained by the generic energy analysis of the entire system. The combined theoretical and numerical energy analyses reveal the influences of the pre-impact drop shape and their effects on the subsequent energy conversion after the impact takes place. The analysis also reveals that the initial surface and kinetic energies are different for non-spherical droplets than for the spherical ones. The conversion of such excess surface energy due to the non-spherical curvature into kinetic energy dictates the impact and subsequently the crater dynamics of such systems. Such influences largely lead to the exclusive flow patterns demonstrated here. Concisely, this study presents a tri-phasic computational model, which is capable of analyzing the salient features of the impact and splash dynamics of the non-spherical droplets into a water continuum.
RESUMO
We explore the improvements in yield and conversion of a chemical reaction inside a two-phase microfluidic reactor when subjected to an externally applied alternating current (AC) electric field. A computational fluid dynamic (CFD) framework has been developed to incorporate the descriptions of the two-phase flow, multicomponent transport and reaction, and the Maxwell's stresses generated at oil-water interface owing to the presence of the externally applied electric field. The CFD model ensures that the reactants are flown into a microchannel together with the oil and water phases before the reaction takes place at the interface and products diffuse back to the bulk phases. The study unveils that the variation in the intensity of the AC field helps in converting a two-phase stratified flow into an oil-in-water microemulsion composed of oil slugs, plugs, or droplets. Importantly, the results also suggest that harnessing the vortices inside or outside these flow patterns helps in the improvement in mass transfer across the interface, which can be employed to improve the yield and conversion of a reaction. We have shown an example case of a pseudo-first order reaction for which the variation in frequency and intensity of AC field is found to form higher surface-to-volume-ratio flow patterns having a higher throughput. The convective recirculation in and around these miniaturized flow morphologies increase the rate of mass transfer, mixing of reactant and products, conversion of reactant, and yield of products. The results reported can be of significance in the design and development of future advanced-flow rector technologies.
Assuntos
Técnicas Eletroquímicas/instrumentação , Técnicas Analíticas Microfluídicas/instrumentação , Microfluídica/instrumentação , Modelos Químicos , Óleos/química , Água/químicaRESUMO
We report a facile and noninvasive way to disintegrate a microdroplet into a string of further miniaturized ones under the influence of an external electrohydrodynamic field inside a microchannel. The deformation and breakup of the droplet was engendered by the Maxwell's stress originating from the accumulation of induced and free charges at the oil-water interface. While at smaller field intensities, for example less than 1 MV/m, the droplet deformed into a plug, at relatively higher field intensities, e.g. â¼1.16 MV/m, a pair of droplets having opposite surface charge was formed. The charged droplets showed an interesting periodic bridging and breakup during their translation motion across the channel. For even higher field intensities, for example more than 1.2 MV/m, the entire droplet underwent dielectrophoresis toward one of the electrodes before experiencing a strong attractive force from the other electrode to deform into a shape of a Taylor cone. With progress in time, mimicking the electrospraying phenomenon, the cone tip periodically ejected a string of miniaturized water droplets to form a microemulsion inside the channel. The frequency and size of the droplet ejection could be tuned by varying the applied field intensity. A water droplet of â¼214 µm diameter could continuously eject droplets of size â¼10 µm or even smaller to form a microemulsion inside the channel.
Assuntos
Eletroforese em Microchip , Dispositivos Lab-On-A-Chip , Tamanho da Partícula , Simulação por Computador , Eletricidade , Eletroforese em Microchip/instrumentação , Eletroforese em Microchip/métodos , Desenho de Equipamento , Microfluídica , Miniaturização , Modelos Teóricos , SilícioRESUMO
Numerical simulations supplemented by experiments together uncovered that strategic integration of discrete electric fields in a non-invasive manner could substantially miniaturize the droplets into smaller parts in a pressure driven oil-water flow inside microchannels. The Maxwell's stress generated from the electric field at the oil-water interface could deform, stretch, neck, pin, and disintegrate a droplet into many miniaturized daughter droplets, which eventually ushered a one-step method to form water-in-oil microemulsion employing microchannels. The interplay between electrostatic, inertial, capillary, and viscous forces led to various pathways of droplet breaking, namely, fission, cascade, or Rayleigh modes. While a localized electric field in the fission mode could split a droplet into a number of daughter droplets of smaller size, the cascade or the Rayleigh mode led to the formation of an array of miniaturized droplets when multiple electrodes generating different field intensities were ingeniously assembled around the microchannel. The droplets size and frequency could be tuned by varying the field intensity, channel diameter, electrode locations, interfacial tension, and flow ratio. The proposed methodology shows a simple methodology to transform a microdroplet into an array of miniaturized ones inside a straight microchannel for enhanced mass, energy, and momentum transfer, and higher throughput.
Assuntos
Técnicas Analíticas Microfluídicas , Modelos Teóricos , Simulação por Computador , Eletricidade , Óleos de Silicone/química , Água/químicaRESUMO
The effect of radiative heat transfer on the entropy generation in a two-phase nonisothermal fluid flow between two infinite horizontal parallel plates under the influence of a constant pressure gradient and transverse noninvasive magnetic field have been explored. Both fluids are considered to be viscous, incompressible, immiscible, Newtonian, and electrically conducting. The governing equations in Cartesian coordinates are solved analytically with appropriate boundary conditions to obtain the velocity and temperature profile inside the channel. Application of a transverse magnetic field is found to reduce the throughput and the temperature distribution of the fluids in a pressure-driven flow. The temperature and fluid flow inside the channel can also be noninvasively altered by tuning the magnetic field intensity, temperature difference between the channel walls and the fluids, and several intrinsic fluid properties. The entropy generation due to the heat transfer, magnetic field, and fluid flow irreversibilities can be controlled by altering the Hartmann number, radiation parameter, Brinkmann number, filling ratio, and ratios of fluid viscosities and thermal and electrical conductivities. The surfaces of the channel wall are found to act as a strong source of entropy generation and heat transfer irreversibility. The rate of heat transfer at the channel walls can also be tweaked by the magnetic field intensity, temperature differences, and fluid properties. The proposed strategies in the present study can be of significance in the design and development of next-generation microscale reactors, micro-heat exchangers, and energy-harvesting devices.
RESUMO
HYPOTHESIS: Coupling the continuum approach with a statistical one may help in the development of a generic thermodynamic model to theoretically analyse the variations of interfacial tension and subsequent deformation of an interface between a pair of fluids under a field exposure. In this direction, the local variations of interfacial tension due to the redistribution of interfacial molecules have been expressed as the functions of the molecular interaction potentials for a variety of externally applied fields. NUMERICAL EXPERIMENTS: Two continuum-statistical models for interfacial tension have been developed by choosing two different types of molecular interaction potentials. The proposed analytical models have been successfully integrated with the Cahn-Hilliard and Navier-Stokes framework before solving them numerically using computational tools. FINDINGS: Effects of field exposure on the redistribution of the molecules and the molecular interaction potentials can be correlated to the local variations of the interfacial tension and interfacial deformations. The calculations related to thetemperature dependence ofinterfacialthickness andinterfacialtension matches well with the experimental data. The simulated results show a nearly accurate prediction of the pre-existing experimental and theoretical results on interfacial deformation under electric, magnetic and optical fields.
RESUMO
HYPOTHESIS: Mixing of a chemical trigger of lower surface tension into a microdroplet with relatively higher surface tension can cause a rapid spreading of the droplet on a liquid-sublayer to form a host of metastable liquid morphologies such as sheets, toroids, threads, or droplets. Subsequently, such metastable fluidic objects break into a collection of droplets to form microemulsions. EXPERIMENTS: Introduction of surfactant loaded water or long-chain alcohols into an oleic acid microdroplet stimulate a rapid spreading of the same on a water sublayer, which helps in the formation of a metastable liquid sheet connected to a liquid toroid. Much like slipping films, the liquid sheet dewets the water underlayer through the formation of holes before they grow and coalesce to form liquid ribbons. While such liquid structures eventually break into an array of microdroplets, the liquid toroid expands before undergoing a Plateau-Rayleigh instability to form microdroplets. FINDINGS: A single step self-organization process in which a chemical trigger can convert a microdroplet into a liquid-toroid on a water surface, in absence of any rotational influence. A symmetric to asymmetric transition in toroid morphology is observed due to the changeover of laminar to turbulent flow regimes with the reduction in viscosity of fluid-sublayer or variation in chemical triggers. The toroid cross-section and droplet spacing after the toroid breakup follow a length scale evaluated from a linear stability analysis.
RESUMO
Concentration of α-amylase in human serum is a key indicator of various pancreatic ailments and an affordable point-of-care detection of this biomarker can benefit millions suffering from these diseases. In view of this situation, we report the development of a flexible patch-sensor, which simply requires a microdroplet of aqueous starch-FeSO4 solution to detect α-amylase in serum. The detection is achieved through the generation of mixing vortices (~12 rpm) inside the droplet with the help of an imposed thermal gradient. Such vortices due to Marangoni and natural convections are found to be strongest at an optimal temperature difference of ~18 °C - 23 °C across the droplet which in turn facilitate mixing and promote the specific starch-amylase enzymatic reaction. Subsequently, the large (~80%) variation in the electrical resistance across the droplet is correlated to detect the level of the α-amylase in the analyte. Importantly, the sensor can detect even in the limits of 15-110 units/liter. Further, the sensitivity of flexible sensors is ~8.6% higher than the non-flexible one. Interestingly, the sensitivity of the proposed sensor has been nearly three-times than the previously reported optical ones. The results of patch-sensor match very closely with the standard path-lab tests while detecting unknown level of amylase in serum. The prototype has shown significant potential to translate into an affordable device for the real-time detection and easy prognosis of pancreatic disorders.
Assuntos
Técnicas Biossensoriais , alfa-Amilases , Amilases , Humanos , Soro , AmidoRESUMO
Exposure of a volatile organic vapour could set in powerful rotational motion a microdroplet composed of an aqueous salt solution loaded with metal nanoparticles. The solutal Marangoni motion on the surface originating from the sharp difference in the surface tension of water and organic vapour stimulated the strong vortices inside the droplet. The vapour sources of methanol, ethanol, diethyl ether, toluene, and chloroform stimulated motions of different magnitudes could easily be correlated to the surface tension gradient on the drop surface. Interestingly, when the nanoparticle laden droplet of aqueous salt solution was connected to an external electric circuit through a pair of electrodes, an â¼85-95% reduction in the electrical resistance was observed across the spinning droplet. The extent of reduction in the resistance was found to have a correlation with the difference in the surface tension of the vapour source and the water droplet, which could be employed to distinguish the vapour sources. Remarkably, the power density of the same prototype was estimated to be around 7 µW cm(-2), which indicated the potential of the phenomenon in converting surface energy into electrical in a non-destructive manner and under ambient conditions. Theoretical analysis uncovered that the difference in the ζ-potential near the electrodes was the major reason for the voltage generation. The prototype could also detect the repeated exposure and withdrawal of vapour sources, which helped in the development of a proof-of-concept detector to sense alcohol issuing out of the human breathing system.