Quasi-open Cu(I) sites for efficient CO separation with high O2/H2O tolerance.

Carbon monoxide (CO) separation relies on chemical adsorption but suffers from the difficulty of desorption and instability of open metal sites against O2, H2O and so on. Here we demonstrate quasi-open metal sites with hidden or shielded coordination sites as a promising solution. Possessing the trigonal coordination geometry (sp2), Cu(I) ions in porous frameworks show weak physical adsorption for non-target guests. Rational regulation of framework flexibility enables geometry transformation to tetrahedral geometry (sp3), generating a fourth coordination site for the chemical adsorption of CO. Quantitative breakthrough experiments at ambient conditions show CO uptakes up to 4.1 mmol g-1 and CO selectivity up to 347 against CO2, CH4, O2, N2 and H2. The adsorbents can be completely regenerated at 333-373 K to recover CO with a purity of >99.99%, and the separation performances are stable in high-concentration O2 and H2O. Although CO leakage concentration generally follows the structural transition pressure, large amounts (>3 mmol g-1) of ultrahigh-purity (99.9999999%, 9N; CO concentration < 1 part per billion) gases can be produced in a single adsorption process, demonstrating the usefulness of this approach for separation applications.

Isomeric Porous Cu(I) Triazolate Frameworks Showing Periodic and Aperiodic Flexibility for Efficient CO Separation.

Guest-induced (crystal-to-crystal) transformation, i.e., periodic flexibility, is a typical feature of molecule-based crystalline porous materials, but its role for adsorptive separation is controversial. On the other hand, aperiodic flexibility is rarely studied. This work reports a pair of isomeric Cu(I) triazolate frameworks, namely, α-[Cu(fetz)] (MAF-2Fa) and ß-[Cu(fetz)] (MAF-2Fb), which show typical periodic and aperiodic flexibility for CO chemical adsorption, respectively. Quantitative mixture breakthrough experiments show that, while MAF-2Fa exhibits high adsorption capacity at high pressures but negligible adsorption below the threshold pressure and with leakage concentrations of 3-8%, MAF-2Fb exhibits relatively low adsorption capacity at high pressures but no leakage (residual CO concentration <1 ppb). Tandem connection of MAF-2Fa and MAF-2Fb can combine their advantages of high CO adsorption capacities at high and low pressures, respectively. MAF-2Fa and MAF-2Fb can both keep the separation performances unchanged at high relative humidities, but only MAF-2Fb shows a unique coadsorption behavior at a relative humidity of 82%, which can be used to improve purification performances.

Deep learning-based detection of irreversible pulpitis in primary molars.

BACKGROUND: Changes in healthy and inflamed pulp on periapical radiographs are traditionally so subtle that they may be imperceptible to human experts, limiting its potential use as an adjunct clinical diagnostic feature. AIM: This study aimed to investigate the feasibility of an image-analysis technique based on the convolutional neural network (CNN) to detect irreversible pulpitis in primary molars on periapical radiographs (PRs). DESIGN: This retrospective study was performed in two health centres. Patients who received indirect pulp therapy at Peking University Hospital for Stomatology were retrospectively identified and randomly divided into training and validation sets (8:2). Using PRs as input to an EfficientNet CNN, the model was trained to categorise cases into either the success or failure group and externally tested on patients who presented to our affiliate institution. Model performance was evaluated using sensitivity, specificity, accuracy and F1 score. RESULTS: A total of 348 PRs with deep caries were enrolled from the two centres. The deep learning model achieved the highest accuracy of 0.90 (95% confidence interval: 0.79-0.96) in the internal validation set, with an overall accuracy of 0.85 in the external test set. The mean greyscale value was higher in the failure group than in the success group (p = .013). CONCLUSION: The deep learning-based model could detect irreversible pulpitis in primary molars with deep caries on PRs. Moreover, this study provides a convenient and complementary method for assessing pulp status.

Above-Room-Temperature Ferroelastic Phase Transitions in Two Tetrafluoroborate-Based Hexagonal Molecular Perovskites.

ABX3-type molecular perovskites provide an important platform to tune phase transitions, via judiciously choosing A-, B-, and X-site components, to approach advanced functional materials for applications. Although tetrafluoroborate can act as X-site component to assemble ten instances of ABX3 molecular perovskites, only two of them possess hexagonal perovskite structures. Herein, we report two tetrafluoroborate-based hexagonal molecular perovskites, A[Na(BF4)3], by judiciously choosing two different A-site cations: 1-methyl-1,4-diazabicyclo[2.2.2]octane-1,4-diium (Hmdabco2+) for 1 and 1-methylpiperazine-1,4-diium (H2mpz2+) for 2. They have high-temperature phases in the same space group (P63/mmc) revealing highly disordered A-site cations. Upon cooling, 1 undergoes two-step P63/mmc ↔ P3̅c1 ↔ P21/n transitions at 344 and 338 K, respectively, including a ferroelastic one (3̅mF2/m) accompanied by a spontaneous strain of 0.013. In contrast, the smaller H2mpz2+ cation with more adoptable conformations induces a one-step sharp P63/mmc ↔ P21/c ferroelastic transition (6/mmmF2/m(s)) at 418 K in 2, leading to more significant symmetry breaking and a considerable spontaneous strain of 0.129. This study provides important clues to modulate structural phase transitions by tuning diverse components for the multicomponent dense hybrid crystals.

AGs-Unet: Building Extraction Model for High Resolution Remote Sensing Images Based on Attention Gates U Network.

Building contour extraction from high-resolution remote sensing images is a basic task for the reasonable planning of regional construction. Recently, building segmentation methods based on the U-Net network have become popular as they largely improve the segmentation accuracy by applying 'skip connection' to combine high-level and low-level feature information more effectively. Meanwhile, researchers have demonstrated that introducing an attention mechanism into U-Net can enhance local feature expression and improve the performance of building extraction in remote sensing images. In this paper, we intend to explore the effectiveness of the primeval attention gate module and propose the novel Attention Gate Module (AG) based on adjusting the position of 'Resampler' in an attention gate to Sigmoid function for a building extraction task, and a novel Attention Gates U network (AGs-Unet) is further proposed based on AG, which can automatically learn different forms of building structures in high-resolution remote sensing images and realize efficient extraction of building contour. AGs-Unet integrates attention gates with a single U-Net network, in which a series of attention gate modules are added into the 'skip connection' for suppressing the irrelevant and noisy feature responses in the input image to highlight the dominant features of the buildings in the image. AGs-Unet improves the feature selection of the attention map to enhance the ability of feature learning, as well as paying attention to the feature information of small-scale buildings. We conducted the experiments on the WHU building dataset and the INRIA Aerial Image Labeling dataset, in which the proposed AGs-Unet model is compared with several classic models (such as FCN8s, SegNet, U-Net, and DANet) and two state-of-the-art models (such as PISANet, and ARC-Net). The extraction accuracy of each model is evaluated by using three evaluation indexes, namely, overall accuracy, precision, and intersection over union. Experimental results show that the proposed AGs-Unet model can improve the quality of building extraction from high-resolution remote sensing images effectively in terms of prediction performance and result accuracy.

Facile Solution-Refluxing Synthesis and Photocatalytic Dye Degradation of a Dynamic Covalent Organic Framework.

Covalent organic frameworks (COFs), as a novel crystalline porous adsorbent, have been attracting significant attention for their synthesis and application exploration due to the advantages of designability, stability, and functionalization. Herein, through increasing the concentration of the acid catalyst, a facile solution-refluxing synthesis method was developed for the preparation of a three-dimensional dynamic COF material, COF-300, with high yields (>90%) and high space−time yields (>28 kg m−3 day−1). This synthesis method not only permits gram-scale synthesis, but also yields products that well maintain porosity and unique guest-dependent dynamic behavior. Moreover, the catalytic activity of COF-300 as a metal-free photocatalyst was explored for the first time. Under 365 nm ultra-violet light irradiation, COF-300 can effectively catalyze the dye degradation (>99%) in wastewater with good recyclability. By adding magnetic Fe3O4 nanoparticles into the solution-refluxing synthesis of COF-300, Fe3O4/COF-300 nanocomposites can be obtained and used as magnetically recyclable photocatalysts, demonstrating the superiority of this facile synthesis procedure. Our study provides new insights for the preparation of COF materials and a constructive exploration for their water treatment application.

An Exceptional Thermally Induced Four-State Nonlinear Optical Switch Arising from Stepwise Molecular Dynamic Changes in a New Hybrid Salt.

Switching materials in channels of nonlinear optics (NLOs) are of particular interest in NLO material science. Numerous crystalline NLO switches based on structural phase transition have emerged, but most of them reveal a single-step switch between two different second-harmonic-generation (SHG) states, and only very rare cases involve three or more SHG states. Herein, we report a new organic-inorganic hybrid salt, (Me3 NNH2 )2 [CdI4 ], which is an unprecedented case of a reversible three-step NLO switch between SHG-silent, -medium, -low, and -high states, with high contrasts of 25.5/4.3/9.2 in a temperature range of 213-303 K. By using the combined techniques of variable-temperature X-ray single-crystal structural analyses, dielectric constants, solid-state 13 C nuclear magnetic resonance spectroscopy, and Hirshfeld surface analyses, we disclose that this four-state switchable SHG behavior is highly associated with the stepwise-changed molecular dynamics of the polar organic cations. This finding demonstrates well the complexity of molecular dynamics in simple hybrid salts and their potential in designing new advanced multistep switching materials.

Comparison of indirect pulp treatment and iRoot BP Plus pulpotomy in primary teeth with extremely deep caries: a prospective randomized trial.

OBJECTIVES: The purpose of this randomized controlled trial was to compare the 24-month success rates of indirect pulp treatment (IPT) and iRoot BP Plus pulpotomy of primary molars with extremely deep caries. MATERIALS AND METHODS: Generally healthy children aged 3-7 years requiring general anesthesia for treating primary molars with extremely deep caries or reversible pulpitis were recruited. Patients with systemic disease, mental health problems, or manifestations of irreversible pulpitis were excluded. In total, 175 molars were randomized and blinded for either IPT (n = 87) or iRoot BP Plus pulpotomy (n = 88). All teeth were restored with stainless steel crowns and evaluated after 6, 12, 18, and 24 months by two blinded calibrated investigators. Kaplan-Meier survival curves were used to compare the survival rates between the groups. The correlations between success rate and patient characteristics were explored with the Cox proportional hazards model. RESULTS: A total of 168 primary molars in 67 patients (average age: 3.83 years) were evaluated. The cumulative survival probability at 24 months was not significantly different between the IPT (93.8%) and pulpotomy (97.7%) groups (P = 0.238). IPT treatment success was significantly associated with age (odds ratio = 2.347; 95% CI: 1.068-5.156; P = 0.034) and preoperative sensitivity (odds ratio = 9.742; 95% CI: 1.079-87.970; P = 0.043). CONCLUSIONS: The 24-month success rates of IPT and iRoot BP Plus pulpotomy performed in primary molars with extremely deep caries were not significantly different. Increasing age and preoperative sensitivity were found to be associated with the cumulative survival probability in IPT-treated primary molars with extremely deep caries. Primary teeth with extremely deep carious lesions without signs of irreversible pulpitis can be treated successfully by either indirect pulp capping or iRoot BP Plus pulpotomy. TRIAL REGISTRATION: ChiCTR2000032462.

Guest-Driven Light-Induced Spin Change in an Azobenzene Loaded Metal-Organic Framework.

Stimuli-responsive materials that can be reversibly switched by light are of immense interest. Among them, photo-responsive spin crossover (SCO) complexes have great promises to combine the photoactive inputs with multifaceted outputs into switchable materials and devices. However, the reversible control the spin-state change by photochromic guests is still challenging. Herein, we report an unprecedented guest-driven light-induced spin change (GD-LISC) in a Hofmann-type metal-organic framework (MOF), [Fe(bpn){Ag(CN)2 }2 ]⋅azobenzene. (1, bpn=1,4-bis(4-pyridyl)naphthalene). The reversible trans-cis photoisomerization of azobenzene guest upon UV/Vis irradiation in the solid-state results in the remarkable magnetic changes in a wide temperature range of 10-180 K. This finding not only establishes a new switching mechanism for SCO complexes, but also paves the way toward the development of new generation of photo-responsive magnetic materials.

Effects of breast-feeding duration, bottle-feeding duration and non-nutritive sucking habits on the occlusal characteristics of primary dentition.

BACKGROUND: Early transition from breastfeeding and non-nutritive sucking habits may be related to occlusofacial abnormalities as environmental factors. Previous studies have not taken into account the potential for interactions between feeding practice, non-nutritive sucking habits and occlusal traits. This study assessed the effects of breast-feeding duration, bottle-feeding duration and non-nutritive sucking habits on the occlusal characteristics of primary dentition in 3-6-year-old children in Peking city. METHODS: This cross sectional study was conducted via an examination of the occlusal characteristics of 734 children combined with a questionnaire completed by their parents/guardians. The examination was performed by a single, previously calibrated examiner and the following variables were evaluated: presence or absence of deep overbite, open bite, anterior crossbite, posterior crossbite, deep overjet, terminal plane relationship of the second primary molar, primary canine relationship, crowding and spacing. Univariate analysis and multiple logistic regressions were applied to analyze the associations. RESULTS: It was found that a short duration of breast-feeding (never or ≤ 6 months) was directly associated with posterior cross bite (OR = 3.13; 95% CI = 1.11-8.82; P = 0.031) and no maxillary space (OR = 1.63; 95% CI = 1.23-2.98; P = 0.038). In children breast-fed for ≤ 6 months, the probability of developing pacifier-sucking habits was 4 times that for those breast-fed for >6 months (OR = 4.21; 95% CI = 1.85-9.60; P = 0.0002). Children who were bottle-fed for over 18 months had a 1.45-fold higher risk of nonmesial step occlusion and a 1.43-fold higher risk of a class II canine relationship compared with those who were bottle-fed for up to 18 months. Non-nutritive sucking habits were also found to affect occlusion: A prolonged digit-sucking habit increased the probability of an anterior open bite, while a pacifier-sucking habit associated with excessive overjet and absence of lower arch developmental space. CONCLUSION: Breastfeeding duration was shown to be associated with the prevalence of posterior crossbite, no maxillary space in the deciduous dentition and development of a pacifier-sucking habit. Children who had a digit-sucking habit were more likely to develop an open bite.

[Degradation evaluation and success of pulpectomy with a modified primary root canal filling in primary molars].

OBJECTIVE: To compare clinical and radiographic success rates of a modified primary root canal filling (ingredients: zinc oxide-eugenol, iodoform and calcium hydroxide, MPRCF) vs. zinc oxide-eugenol cement (ZOE) and calcium hydroxide/iodoform paste (Vitapex) in pulpectomized primary molars at the end of 6 and 12 months, and to evaluate the degradation of materials in the root canals and in apical area. METHODS: In the study, 160 primary molars from 155 children (the average age: 5.88±1.27 years) that met the inclusion criteria were allocated to one of the three materials via block randomization. A two-visit pulpectomy was performed by an investigator. The clinical and radiographic diagnoses were blindly assessed by other two investigators. RESULTS: At the end of 6 and 12 months, the ZOE and MPRCF success rates were 100% both in clinical and radiographic evaluation. The Vitapex group showed the clinical success of 100% at the end of 6 months and 94.5% at the end of 12 months. Radiographic evaluation for the Vitapex group showed 80.4% success at the end of 6 months and 60.7% at the end of 12 months. No statistically significant differences were noted at the end of 6 months in the three groups both in clinical and radiographic evaluation. The success rates in clinical and radiographic evaluation at the end of 12 months for ZOE and MPRCF groups were not significantly different, and better than those for Vitapex group with statistically significant difference. The completely resorb rate of excess extruded extraradicularly were 14.3%, 100% and 71.4% for ZOE, Vitapex and MPRCF at the end of 12 months. The rates of resorption of material at the same rate of the root were 5.8%, 7.2% and 40.9% for ZOE, Vitapex and MPRCF at the end of 12 months. CONCLUSION: MPRCF, a mixture of zinc oxide eugenol and iodoform with calcium hydroxide can be used as a root canal filling material in primary teeth, taking account of the success rate and resorbing at a similar rate with the roots of the primary teeth.

[Influence of the effect of general anaesthesia and restraint during dental treatment on dental anxiety and behavior in children].

OBJECTIVE: To compare the level of dental anxiety and dental behavior between dental fear children with dental treatment under general anaesthesia (GA) and those under restraint. METHODS: The GA group included 31 dental fear children aged 4-6-year-old who received dental treatment under the GA. The restraint group included 31 dental fear children aged 4-6-year-old who received dental treatment under the restraint. Age, gender, parent's education level, decayed-missing-filled-tooth (dmft) and face version of the Modified Child Dental Anxiety Scale (MCDASf) score before treatment were matched between the two groups. The Chinese version of MCDASf was used to evaluate the level of dental anxiety in each child before treatment, right after treatment and before examination at recall visit 2-3 weeks after treatment. And the Chinese version of Venham Clinical Anxiety and Cooperative Behavior Scale was used to evaluate children's dental behavior in each child before treatment and before examination at recall visit 2-3 weeks after treatment. RESULTS: The average scores of MCDASf in GA group right after treatment and before recall were lower than that before treatment. The difference was statistically significant (P<0.05). Furthermore, the average score of MCDASf before recall was lower than those after treatment, and the difference was statistically significant (P<0.05). The average scores of MCDASf in restraint group right after treatment and 2-3 weeks after treatment were higher than those before treatment, but the difference was not statistically significant (P>0.05). Children's dental behavior was significantly improved at recall visit in both groups (P<0.01). CONCLUSION: Dental fear could be reduced by treatment under GA. The children's dental behavior was improved after GA. Restraint did not result in the significant elevation of dental anxiety level, but dental behavior was improved after restraint during the short-term recall.

Chairside digital design and manufacturing method for children's band and loop space maintainers.

OBJECTIVES: This study proposes a chairside digital design and manufacturing method for band and loop space maintainers and preliminarily validates its clinical feasibility. METHODS: Clinical cases of 10 children requiring space maintenance caused by premature loss of primary teeth were collected. Intraoral scan data of the affected children were also collected to establish digital models of the missing teeth. Using a pediatric band and loop space maintainer design software developed by our research team, a rapid personalized design of band and loop structures was achieved, and a digital model of an integrated band and loop space maintainer was ultimately generated. A chairside space maintainer was manufactured through metal computer numerical control machining for the experimental group, whereas metal 3D printing in the dental laboratory was used for the control group. A model fitting assessment was conducted for the space maintainers of both groups, and senior pediatric dental experts were invited to evaluate the clinical feasibility of the space maintainers with regard to fit and stability using the visual analogue scale scoring system. Statistical analysis was also performed. RESULTS: The time spent in designing and manufacturing the 10 space maintainers of the experimental group was all less than 1 h. Statistical analysis of expert ratings showed that the experimental group outperformed the control group with regard to fit and stability. Both types of space maintainers met clinical requirements. CONCLUSIONS: The chairside digital design and manufacturing method for pediatric band and loop space maintainers proposed in this study can achieve same-day fitting of space maintainers at the first appointment, demonstrating good clinical feasibility and significant potential for clinical application.

Designing dynamic coordination bonds in polar hybrid crystals for a high-temperature ferroelastic transition.

Ferroelastic materials have gained widespread attention as promising candidates for mechanical switches, shape memory, and information processing. Their phase-transition mechanisms usually originate from conventional order-disorder and/or displacive types, while those involving dynamic coordination bonds are still scarce. Herein, based on a strategic molecular design of organic cations, we report three new polar hybrid crystals with a generic formula of AA'RbBiCl6 (A = A' = Me3SO+ for 1; A = Me3SO+ and A' = Me4N+ for 2; A = A' = Me3NNH2+ for 3). Their A-site cations link to the [RbBiCl6]n2n- inorganic framework with lon topology through Rb-O/N coordination bonds, while their significantly different interactions between A'-site cations and inorganic frameworks provide distinct phase-transition behaviour. In detail, the strongly coordinative A'-site Me3SO+ cations prevent 1 from a structural phase transition, while coordinatively free A'-site Me4N+ cations trigger a conventional order-disorder ferroelastic transition at 247 K in 2, accompanied by a latent heat of 0.63 J g-1 and a usual "high → low" second-harmonic-generation (SHG) switch. Interestingly, the A'-site Me3NNH2+ cations in 3 reveal unusual dynamic coordination bonds, driving a high-temperature ferroelastic transition at 369 K with a large latent heat of 18.34 J g-1 and an unusual "low → high" SHG-switching behaviour. This work provides an effective molecular assembly strategy to establish dynamic coordination bonds in a new type of host-guest model and opens an avenue for designing advanced ferroelastic multifunctional materials.

StateNet: Deep State Learning for Robust Feature Matching of Remote Sensing Images.

Seeking good correspondences between two images is a fundamental and challenging problem in the remote sensing (RS) community, and it is a critical prerequisite in a wide range of feature-based visual tasks. In this article, we propose a flexible and general deep state learning network for both rigid and nonrigid feature matching, which provides a mechanism to change the state of matches into latent canonical forms, thereby weakening the degree of randomness in matching patterns. Different from the current conventional strategies (i.e., imposing a global geometric constraint or designing additional handcrafted descriptor), the proposed StateNet is designed to perform alternating two steps: 1) recalibrates matchwise feature responses in the spatial domain and 2) leverages the spatially local correlation across two sets of feature points for transformation update. For this purpose, our network contains two novel operations: adaptive dual-aggregation convolution (ADAConv) and point rendering layer (PRL). These two operations are differentiable, so our network can be inserted into the existing classification architecture to reduce the cost of establishing reliable correspondences. To demonstrate the robustness and universality of our approach, extensive experiments on various real image pairs for feature matching are conducted. Experiments reveal the superiority of our StateNet significantly over the state-of-the-art alternatives.

Heat- and Pressure-driven Room-temperature Polymorphic Transition Accompanied with Switchable SHG Signal in a New Chiral Hexagonal Perovskite.

Endowing room-temperature polymorphs with both long-term stability and easy interconvertibility is a big challenge due to the complexity of intermolecular interactions. Herein, we present a chiral hexagonal perovskite (R-3-hydroxy-1-methylpiperidinium)[CdCl3 ] having two room-temperature crystalline forms featuring obviously distinct second-harmonic-generation (SHG) signals with a high switching contrast of ~18 times. The two room-temperature forms could be long-term stable yet easily interconvertible through an irreversible thermal-induced phase transition and a pressure-driven backward transition, by switching hydrogen bonds via collective reorientation of ordered homochiral cations. Based on the essential role of homochiral organic cations in inducing switchable hydrogen bond linkages, this present instance provides good evidence that relatively irregular organic cations could induce more obvious inorganic chain deformations, thus endowing polymorphs with significantly different SHG signals at room temperature.

An anomalous ferroelastic phase transition arising from an unusual cis-/anti-conformational reversal of polar organic cations.

Hybrid ferroelastics have attracted increasing attention for their potential application as mechanical switches. The sporadically documented anomalous ferroelastic phase transitions, i.e., ferroelasticity that appears at a high-temperature phase rather than a low-temperature phase, are of particular interest but are not well understood at the molecular level. By judiciously choosing a polar and flexible organic cation (Me2NH(CH2)2Br+) with cis-/anti- conformations as an A-site component, we obtained two new polar hybrid ferroelastics, A2[MBr6] (M = Te for 1 and Sn for 2). These materials undergo distinct thermal-induced ferroelastic phase transitions. The larger [TeBr6]2- anions anchor the adjacent organic cations well and essentially endow 1 with a conventional ferroelastic transition (P21 → Pm21n) arising from a common order-disorder transition of organic cations without conformational changes. Moreover, the smaller [SnBr6]2- anions can interact with the adjacent organic cations in energetically similar sets of intermolecular interactions, enabling 2 to undergo an anomalous ferroelastic phase transition (P212121 → P21) arising from an unusual cis-/anti-conformational reversal of organic cations. These two instances demonstrate the importance of the delicate balance of intermolecular interactions for inducing anomalous ferroelastic phase transitions. The findings here provide important insights for seeking new multifunctional ferroelastic materials.

Periodate-based molecular perovskites as promising energetic biocidal agents.

Epidemics caused by pathogens in recent years have created an urgent need for energetic biocidal agents with the capacity of detonation and releasing bactericides. Herein we present a new type of energetic biocidal agents based on a series of iodine-rich molecular perovskites, (H2dabco)M(IO4)3 (dabco = 1,4-diazabicyclo[2.2.2]octane, M = Na+/K+/Rb+/NH4 + for DAI-1/2/3/4) and (H2dabco)Na(H4IO6)3 (DAI-X1). These compounds possess a cubic perovskite structure, and notably have not only high iodine contents (49-54 wt%), but also high performance in detonation velocity (6.331-6.558 km s-1) and detonation pressure (30.69-30.88 GPa). In particular, DAI-4 has a very high iodine content of 54.0 wt% and simultaneously an exceptional detonation velocity up to 6.558 km s-1. As disclosed by laser scanning confocal microscopy observation and a standard micro-broth dilution method, the detonation products of DAI-4 exhibit a broad-spectrum bactericidal effect against bacteria (E. coli, S. aureus, and P. aeruginosa). The advantages of easy scale-up synthesis, low cost, high detonation performance, and high iodine contents enable these periodate-based molecular perovskites to be highly promising candidates for energetic biocidal agents. Electronic Supplementary Material: Supplementary material is available in the online version of this article at 10.1007/s40843-022-2257-6.

Reliability of Cusp Angulation Using Three-Dimensional Digital Models: A Preliminary In Vitro Study.

BACKGROUND: Dental cusp angulation provides valuable insights into chewing efficiency and prosthesis safety. Artificial intelligence-enabled computing of cusp angles has potential important value, but there is currently no reliable digital measurement method as a cornerstone. OBJECTIVES: To establish a digital method for measuring cusp angles and investigate inter-rater and intra-rater reliabilities. METHODS: Two cusp angles (angles α and ß) of the first molar were measured on 21 plaster casts using a goniometer and on their corresponding digital models using PicPick software after scanning with a CEREC Bluecam three-dimensional (3D) intraoral scanner. Means ± standard deviations, as well as intraclass correlation coefficients (ICCs) and Pearson's correlation coefficients (PCCs) were calculated, and repeated measures analysis of variance was performed. The Bland-Altman method was used to calculate the difference and mean degree values of two measurement methods from both examiners, and the Bland-Altman diagram was drawn using MedCalc software. RESULTS: When the examiner was experienced, angle α was 139.19° ± 13.86°, angle ß was 19.25° ± 6.86°, and a very strong positive correlation between the two methods was found (r > 0.9; p < 0.001). No significant difference between the two methods was found using the repeated measures analysis of variance (p > 0.05). The Bland-Altman diagram showed that the two methods were highly consistent. For inter-rater assessments, the ICC and PCC values of the cusp angulation using the digital method were all higher than the corresponding values measured on traditional casts. For intra-rater assessments, the ICC values of cusp angulation using the digital method were higher than the corresponding values measured on traditional plaster casts for both examiners. However, repeated measurements of the angle ß of the inter-examiners revealed significant differences (p < 0.05) for both methods. CONCLUSIONS: Cusp angulation using 3D digital models is a clinical option and appears to improve the reliability of cusp angulation compared with measuring plaster casts using a goniometer. This variability was still evident when measuring small cusp angles using the digital model for inexperienced examiners.