Hyper-Cross-Linked Resin Modified by a Micropore Polymer for Gas Adsorption and Separation.

Polymerization confined to the pore was first adapted for the nanoscale structure adjustment of adsorption resin. The self-cross-linked polymer (P-1) formed in the pore of hyper-cross-linked resin (HR) by the Friedel-Crafts reaction of p-dichloroxylene (p-DCX), occupying the macropore of the HR resin and bringing about an external micropore. Compared with the raw HR resin, the volume of the micropore of HR@P-1 in 0.4 < D < 1 nm increased but the volume of the macropore has obviously decreased. After the loading of P-1 in the nanopore of HR, HR@P-1 has better gas adsorption performance. At 298 and 100 KPa, the adsorption capacity of CO2 is almost 30% higher than that of HR, reaching 35.7 cm3/g, due to the increase in the smaller micropore volume. Moreover, HR@P-1 has also been found to be the first C2H6-selective adsorption resin. The uptake of C2H6 is up to 56 cm3/g, and the IAST selectivity of C2H6/CH4 reaches 15.3. HR@P-1 can also separate syngas efficiently at ambient temperature and be regenerated by simple vacuum operation.

Modern methods and materials used to treat root perforation: effectiveness comparison.

This study aims to experimentally compare the efficacy of different endodontic materials (iRoot BP Plus, Biodentine, MTA, Rootdent, and Trioxide) in the treatment of pulpitis and perforations on extracted tooth specimens. Additionally, the study aims to investigate the influence of iRoot BP Plus endodontic material on the regenerative processes following pulp amputation in laboratory animals. The secondary goal is to evaluate the effect of iRoot BP Plus on the restoration process in laboratory animals after pulp removal. The study presents a micropermeability analysis of the selected biomaterials performed on a sample of 50 single-rooted apical teeth in 2022. All teeth underwent endodontic treatment. Changes in molar morphology were investigated with eight laboratory animals (rabbits, 3 months old, all males) after simulated pulp removal and subsequent treatment with the iRoot BP Plus biomaterials. iRoot BP Plus appeared to be more effective in retrograde apical root filling than other biomaterials, as evidenced by its higher sealing effect. An experiment involving animal participants revealed the presence of protective adaptive mechanisms, which manifested in the form of an inflammatory process within 6 weeks after the dental pulp was removed. The connective tissue replaced the necrosis, and new capillaries began to form intensively. These dental outcomes suggest that iRoot BP Plus enables hermetical sealing in tooth restoration with good adhesion. Thus, it may have the ability to promote more active tissue regeneration after pulp removal.

Clinical evaluation of resorbable polylactic acid (PLA) intracanal posts for primary incisor restoration. Randomized controlled clinical trial.

This randomized, controlled clinical trial compares the clinical performance of glass-fibre and resorbable polylactic acid (PLA) intracanal posts used to restore carious primary incisors in young patients. The study sample includes 180 primary upper central incisors of 90 children aged 3 to 4 years. All patients were randomly divided into two equal groups of 45 children who received PLA and glass-fibre (GFP) intracanal posts. The clinical assessment of incisor restorations was carried out immediately upon completion and at months 3, 6 and 12 according to the following criteria: anatomical form, marginal adaptation, surface roughness, marginal pigmentation, colour match, secondary caries and contact point. The Gingival Index (GI), the Bleeding Index (Cowell modification; mBI), and bite force (BF) were measured. At the 3-month follow-up, the occlusal BF of patients who received PLA posts was higher than the baseline; the GI and mBI scores were lower, by contrast (p < 0.05). This tendency was even more pronounced 6 and 12 months after the restoration. The incidence of side effects or symptoms (apical inflammation, cervical fracture, loosening of the crown) after the PLA posts was significantly lower than after the GFP (p < 0.05). No statistically significant differences were present between the two groups with respect to colour matching, anatomical form, marginal adaptation, marginal pigmentation, surface roughness, occlusal contact and secondary caries. Based on the results, applying PLA intracanal posts and cyanoacrylate to residual anterior crowns in young children can improve their gingival health, reduce side effects, and increase the likelihood of successful restoration.

[Application of Novel Down-sampling Method in Retinal Vessel Segmentation].

Accurate segmentation of retinal blood vessels is of great significance for diagnosing, preventing and detecting eye diseases. In recent years, the U-Net network and its various variants have reached advanced level in the field of medical image segmentation. Most of these networks choose to use simple max pooling to down-sample the intermediate feature layer of the image, which is easy to lose part of the information, so this study proposes a simple and effective new down-sampling method Pixel Fusion-pooling (PF-pooling), which can well fuse the adjacent pixel information of the image. The down-sampling method proposed in this study is a lightweight general module that can be effectively integrated into various network architectures based on convolutional operations. The experimental results on the DRIVE and STARE datasets show that the F1-score index of the U-Net model using PF-pooling on the STARE dataset improved by 1.98%. The accuracy rate is increased by 0.2%, and the sensitivity is increased by 3.88%. And the generalization of the proposed module is verified by replacing different algorithm models. The results show that PF-pooling has achieved performance improvement in both Dense-UNet and Res-UNet models, and has good universality.

Laparoscopic central hepatectomy using a parenchymal-first approach: how we do it.

BACKGROUND: Laparoscopic central hepatectomy (LCH) is a difficult and challenging procedure. This study aimed to describe our experience with LCH using a parenchymal-first approach. METHODS: Between July 2017 and June 2021, 19 consecutive patients underwent LCH using a parenchymal-first approach at our institution. Herein, the details of this procedural strategy are described, and the demographic and clinical data of the included patients were retrospectively analyzed. RESULTS: There were 1 female and 18 male patients, all with hepatocellular carcinoma without major vascular invasion. The mean age was 57 ± 10 years. No patients underwent conversion to open surgery, and no blood transfusions were needed intraoperatively. The average operative duration and the average Pringle maneuver duration were 223 ± 65 min and 58 ± 11 min. respectively. The median blood loss was 200 ml (range: 100-800 ml). Postoperative morbidities occurred in 3 patients (15.8%), including 2 cases of bile leakage and 1 case of acquired pulmonary infection; there were no postoperative complications happened such as bleeding, hepatic failure, or mortality. The average postoperative hospital stay was 10 ± 3 days. CONCLUSION: The optimized procedure of LCH using a parenchymal-first approach is not only feasible but also expected to provide an advantage in laparoscopic anatomical hepatectomy.

The amino acid and carnitine concentration changes in bronchoalveolar lavage fluid from lung cancer patients.

OBJECTIVE: To screen out potential biomarkers by analyzing fundamental nutrients in the bronchoalveolar lavage fluid (BALF) before confirming the lung cancer. METHODS: In this study, 44 patients were enrolled with clinical information. The concentrations of 23 amino acids and 35 carnitines in their BALF were detected with the high-performance liquid chromatography-mass spectrometry (HPLC-MS). Combined with clinicopathological diagnosis, the patients were divided into the lung cancer group (grades I & II and III & IV) and the non-cancer group for standard statistical analysis. RESULTS: The partial least squares-discriminant analysis (PLS-DA), the Shapiro-Wilk test, and the Bonferroni correction results showed that the serine concentration was higher and the butane-diacyl-carnitine (C4DC) concentration was lower in the lung cancer group, further showing the same changing trend continuously through the non-cancer stage, grades I & II stage and grades III & IV stage. Those two potential biomarkers have been identified. CONCLUSION: The HPLC-MS target detection in clinic for nutrient concentration levels is a promising technique to find the changing concentration of serine and C4DC in BALF, which provides an economical and practical way for early warning of lung cancer.

Comparative study of lipid production from cellulosic ethanol fermentation wastewaters by four oleaginous yeasts.

The biochemical treatment of cellulosic ethanol wastewater (CEW) is considered to be an ideal green process. To screen out the best oleaginous yeastfor the utilization of cellulosic ethanol wastewater, four oleaginous yeasts (Trichosporon cutaneum, Rhorosporidium toruloides, Cryptococcus albidus and T. coremiiforme) were compared to assess their abilities for lipid production in terms of biomass production, lipid content and lipid yield. Furthermore, thechemical oxygen demand (COD) conversion rate, COD degradation and fatty acid composition were calculated to analyze the effect of wastewaters treatment. According to the fermentation results, the highest biomass and lipid yield of T. cutaneum in CEW were 20.945 and 1.56 g/L, respectively, while the R. toruloides reached the highest lipid content (17.32%). The maximum conversion rates of T. cutaneum are 73.64 and 6.06%, respectively, in terms of conversion yield of biomass/COD and lipids/COD. The content of fatty acids showed that after six days' fermentation, T. coremiiforme obtained the highest unsaturated fatty acid content, the content of C18:1 and C18:2 was 57.64%. This study suggests that T. cutaneum has great potential for lipid production and wastewaters treatment from cellulosic ethanol fermentation.

Evaluation of Architect anti-HCV Signal to Cutoff Ratios for Predicting Hepatitis C Viremia Using COBAS AmpliPrep/COBAS TaqMan HCV Quantitative Test.

BACKGROUND: The aim of the study is to evaluate the significance of the Architect anti-HCV signal to cutoff (S/CO) ratios for predicting hepatitis C viremia and determine the optimal S/Co ratio value for Architect anti-HCV assay. METHODS: The results of patients who underwent HCV RNA quantitative assays because of positive anti-HCV from January 2015 to August 2019 were retrospectively analyzed, including S/Co ratio values, HCV RNA quantitative results, alanine aminotransferase (ALT), and aspartate transaminase (AST) values. Binary logistic regression and Spearman's correlation coefficient were used to analyze the collected data. Receiver-operating characteristics curve (ROC) was applied to analyze the predicting values of the indexes. RESULTS: In total, 811 patients were included in our study and HCV viremia was detected in 342 (42.1%) patients. There is no correlation between anti-HCV S/CO ratio and HCV RNA level. The samples with an S/Co ratio between 1 and 4 (271/271, 100%) were all HCV RNA negative. The area under the ROC curve of anti-HCV S/CO ratio was 0.8714 and the maximal Youden index was 0.681 at an optimal cutoff S/CO ratio value of 8.99. CONCLUSIONS: With the cutoff value of 1.0, the Architect anti-HCV assay showed excellent sensitivity but poor specificity in predicting HCV viremia. An S/Co ratio of 8.99 was optimal for further confirmation testing of HCV viremia.

Performance evaluation of the DAAN HCV assay for quantification of hepatitis C virus RNA and its comparison with COBAS AmpliPrep/COBAS TaqMan HCV Quantitative Test, v2.0.

BACKGROUND: The Daan HCV RNA quantitative assay was a recently developed kit with high sensitivity for the detection of HCV RNA. We aimed to evaluate the analytical performance of the Daan HCV RNA quantitative assay and compare it with the COBAS AmpliPrep/COBAS TaqMan HCV Quantitative Test, v2.0. METHOD: WHO HCV RNA standard, NIBSC 06/102 standard, and CLSI EP documents were used to evaluate the precision, accuracy, linearity, anti-interference ability, and cross-reactivity of the Daan HCV RNA quantitative assay. Overall 198 clinical serum specimens were used to make comparison between the Daan HCV RNA quantitative assay and the Roche Cobas test. RESULTS: The within-run precision (Swithin ), and total precision (Stotal ) for 6.11 log IU/mL, 4.22 log IU/mL, and 2.32 log IU/mL HCV RNA were 0.13 and 0.15, 0.07 and 0.09, and 0.11 and 0.10, respectively. The linear range was 20-108  IU/mL, and the limit of detection was 15 IU/mL. It did not display any interference with commonly encountered conditions and cross-reactivity with some common virus. A good agreement was observed between the Daan HCV RNA quantitative assay and the Roche Cobas test. CONCLUSION: The Daan HCV RNA quantitative assay has shown satisfactory performances and excellent agreement with COBAS HCV Quantitative Test on clinical specimens with lower cost, which provides an alternative choice for the diagnosis and monitoring of HCV infection in developing countries.

Determining intracellular lipid content of different oleaginous yeasts by one simple and accurate Nile Red fluorescent method.

A simple and accurate Nile Red fluorescent method was built to evaluate the lipid content of three different oleaginous yeasts by one standard curve. The staining of cells can be observed clearly by laser scanning confocal microscope, showing that Nile Red can enter into the cells of oleaginous yeasts easily. A series of conditions such as pretreating temperature, cell suspension concentration (OD600), staining time, Nile Red concentration and the type of suspension solvent were learnt systematically to obtain the optimal process parameters for Nile Red staining. After optimization, the fitting curve of Nile Red fluorescent method was established under suitable conditions (pretreating temperature: 50 °C, OD600: 1.0; staining time: 5 mins; Nile Red concentration: 1.0 µg/mL; suspension solvent: PBS) and it had a suitable correlation coefficient (R2 = 0.95) for lipid content measurement of different oleaginous yeasts. By this study, the possibility of lipid content determination of different oleaginous yeasts by one fitting curve can be proven and this will improve the efficiency of researches related to microbial lipid production.

CaCO3 supplementation alleviates the inhibition of formic acid on acetone/butanol/ethanol fermentation by Clostridium acetobutylicum.

OBJECTIVE: To investigate the inhibiting effect of formic acid on acetone/butanol/ethanol (ABE) fermentation and explain the mechanism of the alleviation in the inhibiting effect under CaCO3 supplementation condition. RESULTS: From the medium containing 50 g sugars l-1 and 0.5 g formic acid l-1, only 0.75 g ABE l-1 was produced when pH was adjusted by KOH and fermentation ended prematurely before the transformation from acidogenesis to solventogenesis. In contrast, 11.4 g ABE l-1 was produced when pH was adjusted by 4 g CaCO3 l-1. The beneficial effect can be ascribed to the buffering capacity of CaCO3. Comparative analysis results showed that the undissociated formic acid concentration and acid production coupled with ATP and NADH was affected by the pH buffering capacity of CaCO3. Four millimole undissociated formic acid was the threshold at which the transformation to solventogenesis occurred. CONCLUSION: The inhibiting effect of formic acid on ABE fermentation can be alleviated by CaCO3 supplementation due to its buffering capacity.

Extraction and characterization of wax from sugarcane bagasse and the enzymatic hydrolysis of dewaxed sugarcane bagasse.

Extraction of high-value products from agricultural wastes is an important component for sustainable bioeconomy development. In this study, wax extraction from sugarcane bagasse was performed and the beneficial effect of dewaxing pretreatment on the enzymatic hydrolysis was investigated. About 1.2% (w/w) of crude sugarcane wax was obtained from the sugarcane bagasse using the mixture of petroleum ether and ethanol (mass ratio of 1:1) as the extraction agent. Results of Fourier-transform infrared characterization and gas chromatography-mass spectrometry qualitative analysis showed that the crude sugarcane wax consisted of fatty fractions (fatty acids, fatty aldehydes, hydrocarbons, and esters) and small amount of lignin derivatives. In addition, the effect of dewaxing pretreatment on the enzymatic hydrolysis of sugarcane bagasse was also investigated. The digestibilities of cellulose and xylan in dewaxed sugarcane bagasse were 18.7 and 10.3%, respectively, compared with those of 13.1 and 8.9% obtained from native sugarcane bagasse. The dewaxed sugarcane bagasse became more accessible to enzyme due to the disruption of the outermost layer of the waxy materials.

Efficient bioconversion from acid hydrolysate of waste oleaginous yeast biomass after microbial oil extraction to bacterial cellulose by Komagataeibacter xylinus.

Biomass acid hydrolysate of oleaginous yeast Trichosporon cutaneum after microbial oil extraction was applied as substrate for bacterial cellulose (BC) production by Komagataeibacter xylinus (also named as Gluconacetobacter xylinus previously) for the first time. BC was synthesized in static culture for 10 days, and the maximum BC yield (2.9 g/L) was got at the 4th day of fermentation. Most carbon sources in the substrate (glucose, mannose, formic acid, acetic acid) can be utilized by K. xylinus. The highest chemical oxygen demand (COD) removal (40.7 ± 3.0%) was obtained at the 6th day of fermentation, and then the COD increased possibly due to the degradation of BC. The highest BC yield on COD consumption was 38.7 ± 4.0% (w/w), suggesting that this is one efficient bioconversion for BC production. The BC structure was affected little by the substrate by comparison with that generated in classical HS medium using field-emission scanning electron microscope (FE-SEM), Fourier transform infrared, and X-ray diffraction. Overall, this technology can both solve the issue of waste oleaginous yeast biomass and produce valuable biopolymer (BC).

Lumping kinetics of ABE fermentation wastewater treatment by oleaginous yeast Trichosporon cutaneum.

Lumping kinetics models were built for the biological treatment of acetone-butanol-ethanol (ABE) fermentation wastewater by oleaginous yeast Trichosporon cutaneum with different fermentation temperatures. Compared with high temperature (33°C, 306 K) and low temperature (23°C, 296 K), medium temperature (28°C, 301 K) was beneficial for the cell growth and chemical oxygen demand (COD) degradation during the early stage of fermentation but the final yeast biomass and COD removal were influenced little. By lumping method, the materials in the bioconversion network were divided into five lumps (COD, lipid, polysaccharide, other intracellular products, other extracellular products), and the nine rate constants (k1-k9) for the models can well explain the bioconversion laws. The Gibbs free energy (G) for this bioconversion was positive, showing that it cannot happen spontaneous, but the existence of yeast can after the chemical equilibrium and make the bioconversion to be possible. Overall, the possibility of using lumping kinetics for elucidating the laws of materials conversion in the biological treatment of ABE fermentation wastewater by T. cutaneum has been initially proved and this method has great potential for further application.

Efficient Using Durian Shell Hydrolysate as Low-Cost Substrate for Bacterial Cellulose Production by Gluconacetobacter xylinus.

Durian is one important tropical fruit with high nutritional value, but its shell is usually useless and considered as waste. To explore the efficient and high-value utilization of this agricultural and food waste, in this study, durian shell was simply hydrolyzed by dilute sulfuric acid, and the durian shell hydrolysate after detoxification was used for bacterial cellulose (BC) production by Gluconacetobacter xylinus for the first time. BC was synthesized in static culture for 10 days and the highest BC yield (2.67 g/L) was obtained at the 8th day. The typical carbon sources in the substrate including glucose, xylose, formic acid, acetic acid, etc. can be utilized by G. xylinus. The highest chemical oxygen demand (COD) removal (16.40%) was obtained at the 8th day. The highest BC yield on COD consumption and the highest BC yield on sugar consumption were 93.51% and 22.98% (w/w), respectively, suggesting this is one efficient bioconversion for BC production. Durian shell hydrolysate showed small influence on the BC structure by comparison with the structure of BC generated in traditional Hestrin-Schramm medium detected by FE-SEM, FTIR, and XRD. Overall, this technology can both solve the issue of waste durian shell and produce valuable bio-polymer (BC).

Use of elephant grass (Pennisetum purpureum) acid hydrolysate for microbial oil production by Trichosporon cutaneum.

Elephant grass (Pennisetum purpureum) dilute acid hydrolysate contains 34.6 g/L total sugars. The potential of lipid production by oleaginous yeast Trichosporon cutaneum grown on elephant grass acid hydrolysate was investigated for the first time. During the fermentation process on the elephant grass acid hydrolysate, glucose, xylose, and arabinose could be well utilized as carbon sources by T. cutaneum. Interestingly, xylose was almost no use before glucose was consumed completely. This illustrated that simultaneous saccharification of xylose and glucose by T. cutaneum did not occur on elephant grass acid hydrolysate. The highest biomass, lipid content, lipid yield, and lipid coefficient of T. cutaneum were measured after the sixth day of fermentation and were 22.76 g/L, 24.0%, 5.46 g/L, and 16.1%, respectively. Therefore, elephant grass is a promising raw material for microbial oil production by T. cutaneum.

Bacterial cellulose production from the litchi extract by Gluconacetobacter xylinus.

Although litchi has both nutrient and edible value, the extremely short preservation time limited its further market promotion. To explore processed litchi products with longer preservation time, litchi extract was selected as an alternative feedstock for production of bacterial cellulose (BC). After 2 weeks of static fermentation, 2.53 g/L of the BC membrane was obtained. The trace elements including magnesium (Mg) and sodium (Na) in the litchi extract were partly absorbed in the BC membrane, but no potassium (K) element was detected in it, curiously. Scanning electron microscope (SEM) photographs exhibited an ultrafine network nanostructure for the BC produced in the litchi extract. Analysis of the fourier-transform infrared spectroscopy (FTIR) confirmed the pellicles to be a cellulosic material. Interestingly, X-ray diffraction (XRD) results showed the BC membrane obtained from litchi extract had higher crystallinity of 94.0% than that from HS medium. Overall, the work showed the potential of producing high value-added polymer from litchi resources.

Preparation of Bacterial Cellulose/Inorganic Gel of Bentonite Composite by In Situ Modification.

To evaluate the possibility of Bacterial cellulose/Inorganic Gel of Bentonite (BC/IGB) composite production using in situ method, the BC/IGB composite was successfully produced by in situ modification of BC in both HS medium and corncob hydrolysate. The results showed that the BC/IGB composite obtained in HS medium (one classical medium for BC production) had a higher water holding capacity, but the water retention capacity of the BC/IGB composite obtained in corncob hydrolysate was better. The performance of BC/IGB composite depended on the environment of in situ modification. Using different media showed significant influence on the sugar utilization and BC yield. In addition, BC/IGB composite produced by in situ method was compared with that produced by ex situ method, and the results shows that water holding capacity of BC/IGB composite obtained through in situ method was better. XRD results showed the crystallinity of BC/IGB composite related little to its performance as water absorbent. Overall, in situ modification is appropriate for further production of BC composite and other clay materials.

Beneficial effect of corncob acid hydrolysate on the lipid production by oleaginous yeast Trichosporon dermatis.

In this work, corncob acid hydrolysate and its simulated medium whose sugar composition was the same as the corncob acid hydrolysate were used as fermentation substrate for lipid production by oleaginous yeast Trichosporon dermatis. On the corncob acid hydrolysate, after 7 days of fermentation, the biomass, lipid content, lipid yield, and lipid coefficient of T. dermatis were 17.3 g/L, 40.2%, 7.0 g/L, and 16.5%, respectively. Interestingly, during the lipid fermentation on the corncob acid hydrolysate, glucose, xylose, arabinose, and even acetic acid could be well utilized as carbon sources by T. dermatis. Surprisingly, the lipid yield (7.0 g/L) of T. dermatis on the corncob acid hydrolysate was much higher than that (3.8 g/L) on the simulated medium, in spite of the fact that the lipid coefficient (17.4%) on the simulated medium was a little higher. This phenomenon further showed that lignocellulosic acid hydrolysate was a suitable substrate for lipid fermentation by T. dermatis. This work would help the comprehensive utilization of lignocellulosic biomass for lipid production.

[Effect of Qiling Decoction combined HAART on expression levels of Treg cells and Th17 in HIV/AIDS patients].

OBJECTIVE: To explore the effect of Qiling Decoction (QD) combined highly active antiretroviral treatment (HAART) on expression levels of peripheral blood Th17 and Treg cells in HIV/AIDS patients. METHODS: Totally 55 HIV/AIDS patients were randomly assigned to the treatment group (28 cases) and the combination group (27 cases). Besides, 21 HIV negative patients were recruited as the healthy control group. Those in the treatment group received HARRT alone, while those in the combination group received HAART combined QD. The observation lasted for 24 weeks. Meanwhile, according to peripheral blood CD4+ T cell counts before treatment, HIV/AIDS patients were assigned to three subgroups. For patients in subgroup 1, 1 cells/microL < CD4+ T cell counts < or = 100 cells/microL; For patients in subgroup 2, 101 cells/microL < CD4+ T cell counts < or = 200 cells/lL; For patients in subgroup 3, 201 cells/microL < CD4+ T cell counts < or = 350 cells/microL. Expression of peripheral blood Th17 and Treg cells, and number of CD4+ T cell counts were detected using flow cytometry (FCM)in HIV/AIDS patients at the pre-treatment baseline, week 4, 12, and 24, as well as those in the healthy control group. RESULTS: Compared with the healthy control group, CD4+ T cell counts and the baseline expression level of Th17 cells in the peripheral blood of HIV/AIDS patients significantly decreased, the expression level of Treg cells significantly increased P < 0.01). Compared with before treatment in the same group, CD4+ T cell counts all increased at week 4, 12, and 24 in the two treatment groups, showing statistical difference (P < 0.05, P < 0.01). There was no statistical difference in the effective rate at various CD4+ T cell levels between the two groups (P > 0.05). There was no statistical difference in expression levels of Th17 and Treg cells between the combination group and the treatment group at any time point (all P >0.05). The Th17/Treg ration significantly increased in the combination group after 24 weeks of treatment, showing statistical difference when compared with the treatment group (U = 2.135, P = 0.038). CONCLUSION: QD could improve the immune balance of Th17/Treg cells, which might be one of its mechanisms for improving HIV/AIDS patients' immunity.