1D/3D Heterogeneous Assembling Body of Cobalt Nitrides for Highly Efficient Overall Hydrazine Splitting and Supercapacitors.

Herein, the construction of a heterostructured 1D/3D CoN-Co2 N@NF (nickel foam) electrode used for thermodynamically favorable hydrazine oxidation reaction (HzOR), as an alternative to sluggish anodic oxygen evolution reaction (OER) in water splitting for hydrogen production, is reported. The electrode exhibits remarkable catalytic activities, with an onset potential of -0.11 V in HzOR and -71 mV for a current density of 10 mA cm-2 in hydrogen evolution reaction (HER). Consequently, an extraordinary low cell voltage of 53 mV is required to achieve 10 mA cm-2 for overall hydrazine splitting in a two-electrode system, demonstrating significant energy-saving advantages over conventional water splitting. The HzOR proceeds through the 4e- reaction pathway to release N2 while the 1e- pathway to emit NH3 is uncompetitive, as evidenced by differential electrochemical mass spectrometric measurements. The X-ray absorption spectroscopy, in situ Raman spectroscopy, and theoretical calculations identify cobalt nitrides rather than corresponding oxides/(oxy)hydroxides as catalytic species for HzOR and illustrate advantages of heterostructured CoN-Co2 N in optimizing adsorption energies of intermediates/reagents and promoting catalytic activities toward both HzOR and HER. The CoN-Co2 N@NF is also an excellent supercapacitive material, exhibiting an increased specific capacity (938 F g-1 at 1 A g-1 ) with excellent cycling stability (95.8%, 5000 cycles).

How Copper Nanowires Grow and How To Control Their Properties.

Scalable, solution-phase nanostructure synthesis has the promise to produce a wide variety of nanomaterials with novel properties at a cost that is low enough for these materials to be used to solve problems. For example, solution-synthesized metal nanowires are now being used to make low cost, flexible transparent electrodes in touch screens, organic light-emitting diodes (OLEDs), and solar cells. There has been a tremendous increase in the number of solution-phase syntheses that enable control over the assembly of atoms into nanowires in the last 15 years, but proposed mechanisms for nanowire formation are usually qualitative, and for many syntheses there is little consensus as to how nanowires form. It is often not clear what species is adding to a nanowire growing in solution or what mechanistic step limits its rate of growth. A deeper understanding of nanowire growth is important for efficiently directing the development of nanowire synthesis toward producing a wide variety of nanostructure morphologies for structure-property studies or producing precisely defined nanostructures for a specific application. This Account reviews our progress over the last five years toward understanding how copper nanowires form in solution, how to direct their growth into nanowires with dimensions ideally suited for use in transparent conducting films, and how to use copper nanowires as a template to grow core-shell nanowires. The key advance enabling a better understanding of copper nanowire growth is the first real-time visualization of nanowire growth in solution, enabling the acquisition of nanowire growth kinetics. By measuring the growth rate of individual nanowires as a function of concentration of the reactants and temperature, we show that a growing copper nanowire can be thought of as a microelectrode that is charged with electrons by hydrazine and grows through the diffusion-limited addition of Cu(OH)2(-). This deeper mechanistic understanding, coupled to an understanding of the structure-property relationship of nanowires in transparent conducting films, enabled the production of copper nanowires that can be coated from solution to make films with properties that rival the dominant transparent conductor, indium tin oxide. Finally, we show how copper nanowires can be coated with Zn, Sn, In, Ni, Co, Ag, Au, and Pt to protect them from oxidation or enable their use as transparent electrocatalysts.

Cs(I) Cation Enhanced Cu(II) Catalysis of Water Oxidation.

We report here a new catalytic water oxidation system based on Cu(II) ions and a remarkable countercation effect on the catalysis. In a concentrated fluoride solution at neutral to weakly basic pHs, simple Cu(II) salts are highly active and robust in catalyzing water oxidation homogeneously. F(-) in solution acts as a proton acceptor and an oxidatively robust ligand. F(-) coordination prevents precipitation of Cu(II) as CuF2/Cu(OH)2 and lowers potentials for accessing high-oxidation-state Cu by delocalizing the oxidative charge over F(-) ligands. Significantly, the catalytic current is greatly enhanced in a solution of CsF compared to those of KF and NaF. Although countercations are not directly involved in the catalytic redox cycle, UV-vis and (19)F nuclear magnetic resonance measurements reveal that coordination of F(-) to Cu(II) is dependent on countercations by Coulombic interaction. A less intense interaction between F(-) and well-solvated Cs(+) as compared with Na(+) and K(+) leads to a more intense coordination of F(-) to Cu(II), which accounts for the improved catalytic performance.

A half-reaction alternative to water oxidation: chloride oxidation to chlorine catalyzed by silver ion.

Chloride oxidation to chlorine is a potential alternative to water oxidation to oxygen as a solar fuels half-reaction. Ag(I) is potentially an oxidative catalyst but is inhibited by the high potentials for accessing the Ag(II/I) and Ag(III/II) couples. We report here that the complex ions AgCl2(-) and AgCl3(2-) form in concentrated Cl(-) solutions, avoiding AgCl precipitation and providing access to the higher oxidation states by delocalizing the oxidative charge over the Cl(-) ligands. Catalysis is homogeneous and occurs at high rates and low overpotentials (10 mV at the onset) with µM Ag(I). Catalysis is enhanced in D2O as solvent, with a significant H2O/D2O inverse kinetic isotope effect of 0.25. The results of computational studies suggest that Cl(-) oxidation occurs by 1e(-) oxidation of AgCl3(2-) to AgCl3(-) at a decreased potential, followed by Cl(-) coordination, presumably to form AgCl4(2-) as an intermediate. Adding a second Cl(-) results in "redox potential leveling", with further oxidation to {AgCl2(Cl2)}(-) followed by Cl2 release.

High-Yield and Selective Photoelectrocatalytic Reduction of CO2 to Formate by Metallic Copper Decorated Co3O4 Nanotube Arrays.

Carbon dioxide (CO2) reduction to useful chemicals is of great significance to global climate and energy supply. In this study, CO2 has been photoelectrocatalytically reduced to formate at metallic Cu nanoparticles (Cu NPs) decorated Co3O4 nanotube arrays (NTs) with high yield and high selectivity of nearly 100%. Noticeably, up to 6.75 mmol·L(­1)·cm(­2) of formate was produced in an 8 h photoelectrochemical process, representing one of the highest yields among those in the literature. The results of scanning electron microscopy, transmission electron microscopy and photoelectrochemical characterization demonstrated that the enhanced production of formate was attributable to the self-supported Co3O4 NTs/Co structure and the interface band structure of Co3O4 NTs and metallic Cu NPs. Furthermore, a possible two-electron reduction mechanism on the selective PEC CO2 reduction to formate at the Cu­Co3O4 NTs was explored. The first electron reduction intermediate, CO2 ads•­, was adsorbed on Cu in the form of Cu­O. With the carbon atom suspended in solution, CO2 ads•­ is readily protonated to form the HCOO­ radical. And HCOO­ as a product rapidly desorbs from the copper surface with a second electron transfer to the adsorbed species.

Bismuth and chromium co-doped strontium titanates and their photocatalytic properties under visible light irradiation.

Modification of prototype perovskite compound SrTiO3 by introducing foreign elements has been an appealing means to endow this wide band gap semiconductor with visible light responses. Here we systematically investigated a series of Sr1-xBixTi1-xCrxO3 solid solution compounds prepared by two different synthetic routes, namely, solid state reactions and the hydrothermal method. Their crystal structures as well as other physicochemical properties were explored. Our results showed that a number of important factors such as microstructures, crystallinity, light absorbance and surface compositions etc. are all strongly correlated with the synthetic methods used. The hydrothermal method is generally helpful for morphology controls as well as avoiding Cr(6+) defects and Sr segregation at the surface, thereby contributing to a high photocatalytic activity. Better performance normally occurs in samples with a high crystallinity and free of defects like Bi(5+). Theoretical calculations suggest that Cr plays an important role in band gap reduction and photocatalytic reactions, while Bi only acts as a constituent cation for the perovskite structure and does not significantly alter the electronic structures near the Fermi level. Our findings have revealed how synthetic routes are relevant to the final photocatalytic properties of a compound, and therefore comparisons among various photocatalysts have to include concerns about their preparation history.

Theoretical study of catalytic mechanism for single-site water oxidation process.

Water oxidation is a linchpin in solar fuels formation, and catalysis by single-site ruthenium complexes has generated significant interest in this area. Combining several theoretical tools, we have studied the entire catalytic cycle of water oxidation for a single-site catalyst starting with [Ru(II)(tpy)(bpm)(OH(2))](2+) (i.e., [Ru(II)-OH(2)](2+); tpy is 2,2':6',2''-terpyridine and bpm is 2,2'-bypyrimidine) as a representative example of a new class of single-site catalysts. The redox potentials and pK(a) calculations for the first two proton-coupled electron transfers (PCETs) from [Ru(II)-OH(2)](2+) to [Ru(IV) = O](2+) and the following electron-transfer process to [Ru(V) = O](3+) suggest that these processes can proceed readily in acidic or weakly basic conditions. The subsequent water splitting process involves two water molecules, [Ru(V) = O](3+) to generate [Ru(III)-OOH](2+), and H(3)O(+) with a low activation barrier (~10 kcal/mol). After the key O-O bond forming step in the single-site Ru catalysis, another PECT process oxidizes [Ru(III)-OOH](2+) to [Ru(IV)-OO](2+) when the pH is lower than 3.7. Two possible forms of [Ru(IV)-OO](2+), open and closed, can exist and interconvert with a low activation barrier (< 7 kcal/mol) due to strong spin-orbital coupling effects. In Pathway 1 at pH = 1.0, oxygen release is rate-limiting with an activation barrier ~12 kcal/mol while the electron-transfer step from [Ru(IV)-OO](2+) to [Ru(V)-OO](3+) becomes rate-determining at pH = 0 (Pathway 2) with Ce(IV) as oxidant. The results of these theoretical studies with atomistic details have revealed subtle details of reaction mechanisms at several stages during the catalytic cycle. This understanding is helpful in the design of new catalysts for water oxidation.

Splitting CO2 into CO and O2 by a single catalyst.

The metal complex [(tpy)(Mebim-py)Ru(II)(S)](2+) (tpy = 2,2' : 6',2''-terpyridine; Mebim-py = 3-methyl-1-pyridylbenzimidazol-2-ylidene; S = solvent) is a robust, reactive electrocatalyst toward both water oxidation to oxygen and carbon dioxide reduction to carbon monoxide. Here we describe its use as a single electrocatalyst for CO(2) splitting, CO(2) → CO + 1/2 O(2), in a two-compartment electrochemical cell.

Real-time visualization of diffusion-controlled nanowire growth in solution.

This Letter shows that copper nanowires grow through the diffusion-controlled reduction of dihydroxycopper(I), Cu(OH)2(-). A combination of potentiostatic coulometry, UV-visible spectroscopy, and thermodynamic calculations was used to determine the species adding to growing Cu nanowires is Cu(OH)2(-). Cyclic voltammetry was then used to measure the diffusion coefficient of Cu(OH)2(-) in the reaction solution. Given the diameter of a Cu nanowire and the diffusion coefficient of Cu(OH)2(-), we calculated the dependence of the diffusion-limited growth rate on the concentration of copper ions to be 26 nm s(-1) mM(-1). Independent measurements of the nanowire growth rate with dark-field optical microscopy yielded 24 nm s(-1) mM(-1) for the growth rate dependence on the concentration of copper. Dependence of the nanowire growth rate on temperature yielded a low activation energy of 11.5 kJ mol(-1), consistent with diffusion-limited growth.

Copper as a robust and transparent electrocatalyst for water oxidation.

Copper metal is in theory a viable oxidative electrocatalyst based on surface oxidation to Cu(III) and/or Cu(IV) , but its use in water oxidation has been impeded by anodic corrosion. The in situ formation of an efficient interfacial oxygen-evolving Cu catalyst from Cu(II) in concentrated carbonate solutions is presented. The catalyst necessitates use of dissolved Cu(II) and accesses the higher oxidation states prior to decompostion to form an active surface film, which is limited by solution conditions. This observation and restriction led to the exploration of ways to use surface-protected Cu metal as a robust electrocatalyst for water oxidation. Formation of a compact film of CuO on Cu surface prevents anodic corrosion and results in sustained catalytic water oxidation. The Cu/CuO surface stabilization was also applied to Cu nanowire films, which are transparent and flexible electrocatalysts for water oxidation and are an attractive alternative to ITO-supported catalysts for photoelectrochemical applications.

Proton-coupled electron transfer at modified electrodes by multiple pathways.

In single site water or hydrocarbon oxidation catalysis with polypyridyl Ru complexes such as [Ru(II)(Mebimpy)(bpy)(H(2)O)](2+) [where bpy is 2,2'-bipyridine, and Mebimpy is 2,6-bis(1-methylbenzimidazol-2-yl)pyridine] 2, or its surface-bound analog [Ru(II)(Mebimpy)(4,4'-bis-methlylenephosphonato-2,2'-bipyridine)(OH(2))](2+) 2-PO(3)H(2), accessing the reactive states, Ru(V) = O(3+)/Ru(IV) = O(2+), at the electrode interface is typically rate limiting. The higher oxidation states are accessible by proton-coupled electron transfer oxidation of aqua precursors, but access at inert electrodes is kinetically inhibited. The inhibition arises from stepwise mechanisms which impose high energy barriers for 1e- intermediates. Oxidation of the Ru(III)-OH(2+) or forms of 2-PO(3)H(2) to Ru(IV) = O(2+) on planar fluoride-doped SnO(2) electrode and in nanostructured films of Sn(IV)-doped In(2)O(3) and TiO(2) has been investigated with a focus on identifying microscopic phenomena. The results provide direct evidence for important roles for the nature of the electrode, temperature, surface coverage, added buffer base, pH, solvent, and solvent H(2)O/D(2)O isotope effects. In the nonaqueous solvent, propylene carbonate, there is evidence for a role for surface-bound phosphonate groups as proton acceptors.

Single-site copper(II) water oxidation electrocatalysis: rate enhancements with HPO4²â» as a proton acceptor at pH†8.

The complex Cu(II)(Py3P) (1) is an electrocatalyst for water oxidation to dioxygen in H2PO4(-)/HPO4(2-) buffered aqueous solutions. Controlled potential electrolysis experiments with 1 at pH 8.0 at an applied potential of 1.40 V versus the normal hydrogen electrode resulted in the formation of dioxygen (84% Faradaic yield) through multiple catalyst turnovers with minimal catalyst deactivation. The results of an electrochemical kinetics study point to a single-site mechanism for water oxidation catalysis with involvement of phosphate buffer anions either through atom-proton transfer in a rate-limiting O-O bond-forming step with HPO4(2-) as the acceptor base or by concerted electron-proton transfer with electron transfer to the electrode and proton transfer to the HPO4(2-) base.

Manipulating Dual-Metal Catalytic Activities toward Organic Upgrading in Upcycling Plastic Wastes with Inhibited Oxygen Evolution.

Electrorefinery of polybutylene terephthalate (PBT) waste plastic, specifically conversion of a PBT-derived 1,4-butanediol (BDO) monomer into value-added succinate coupled with H2 production, emerges as an auspicious strategy to mitigate severe plastic pollution. Herein, we report the synthesis of Mn-doped NiNDA nanosheets (NDA: 2,6-naphthalenedicarboxylic acid), a metal-organic framework (MOF) through a ligand exchange method, and its utilization for electrocatalytic BDO oxidation to succinate. Interestingly, the transformation of doped layered-hydroxide (d-LH) precursors to MOF promotes BDO oxidation while hindering the competitive oxygen evolution reaction. Experimental and theoretical results indicate that the MOF has a higher affinity (i.e., alcoholophilic) for BDO than the d-LH, while Mn doping into NiNDA results in electron accumulation at Ni sites with an upward shift in the d-band center and convenient spin-dependent charge transfer, which are all beneficial for BDO oxidation. The as-constructed two-electrode membrane-electrode assembly (MEA) flow cell, by coupling BDO oxidation and hydrogen evolution reaction, attains an industrial current density of 1.5 A cm-2@1.82 V at 50 °C, corresponding to a specific energy consumption of 3.68 kWh/Nm3 H2. This represents an energy saving of >25% for hydrogen production on an industrial scale compared to conventional water electrolysis (∼5 kWh/Nm3 H2) in addition to the production of valuable chemicals.

High-efficient M-NC single-atom catalysts for catalytic ozonation in water purification: Performance and mechanisms.

Heterogeneous catalytic ozonation (HCO) holds promise in water purification but suffers from limited accessible metal sites, metal leaching, and unclear structure-activity relationships. This work reported M-NC (M=Co, Ni, Fe, and Mn) single-atom catalysts (SACs) with high atomic efficiency and minimal metal release. The new HCO systems, especially the Co-based system, exhibited impressive performance in various refractory contaminant removal, involving various reactive species generation, such as •OHads, •OHfree, *O, and 1O2. For sulfamethoxazole removal, the normalized kobs for Co-NC, Ni-NC, Fe-NC, and Mn-NC were determined as 13.53, 3.94, 3.55, and 4.13 min-1·mMmetal-1·g·m-2 correspondingly, attributed to the abundant acid sites, faster electron transfer, and lower energy required for O3 decomposition and conversion. The metal atoms and hydroxyl groups, individually serving as Lewis and Bronsted acid sites (LAS and BAS), were the primary centers for •OH generation and O3 adsorption. The relationships between active sites and both O3 utilization and •OH generation were found. LAS and BAS were responsible for O3 adsorption, while strong LAS facilitated O3 conversion into •OH. Theoretical calculations revealed the catalytic mechanisms involved O3→ *O→ *OO→ O3•-→ •OH. This work highlights the significance of SAC design for HCO and advances the understanding of atomic-level HCO behavior.

Engineering of heterointerface of ultrathin carbon nanosheet-supported CoN/MnO enhances oxygen electrocatalysis for rechargeable Zn-air batteries.

Designing bifunctional electrocatalysts with outstanding reactivity and durability towards the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) has remained a long-term aim for metal-air batteries. Achieving the high level of fusion between two distinct metal components to form bifunctional catalysts with optimized heterointerfaces and well-defined morphology holds noteworthy implications in the enhancement of electrocatalytic activity yet challenging. Herein, the fabrication of numerous heterointerfaces of CoN/MnO is successfully realized within ultrathin carbon nanosheets via a feasible self-templating synthesis strategy. Experimental results and theoretic calculations verify that the interfacial electron transfer from CoN to MnO at the heterointerface engenders an ameliorated charge transfer velocity, finely tuned energy barriers concerning reaction intermediates and ultimately accelerated reaction kinetics. The as-prepared CoN/MnO@NC demonstrates exceptional bifunctional catalytic performance, excelling in both OER and ORR showcasing a low reversible overpotential of 0.69 V. Furthermore, rechargeable liquid and quasi-solid-state flexible Zn-air batteries employing CoN/MnO@NC as the air-cathode deliver remarkable endurance and elevated power density, registering values of 153 and 116 mW cm-2 respectively and exceeding Pt/C + RuO2 counterparts and those reported in literature. Deeply exploring the effect of electron-accumulated heterointerfaces on catalytic activity would contribute wisdom to the development of bifunctional electrocatalysts for rechargeable metal-air batteries.

Photovoltaic-driven Ni(ii)/Ni(iii) redox mediator for the valorization of PET plastic waste with hydrogen production.

Electrocatalytic valorization of PET plastic waste provides an appealing route by converting intermittent renewable energy into valuable chemicals and high-energy fuels. Normally, anodic PET hydrolysate oxidation and cathodic water reduction reactions occur simultaneously in the same time and space, which increases the challenges for product separation and operational conditions. Although these problems can be addressed by utilizing membranes or diaphragms, the parasitic cell resistance and high overall cost severely restrict their future application. Herein, we introduce a Ni(ii)/Ni(iii) redox mediator to decouple these reactions into two independent processes: an electrochemical process for water reduction to produce hydrogen fuel assisted by the oxidation of the Ni(OH)2 electrode into the NiOOH counterpart, followed subsequently by a spontaneous chemical process for the valorization of PET hydrolysate to produce formic acid with a high faradaic efficiency of ∼96% by the oxidized NiOOH electrode. This decoupling strategy enables the electrochemical valorization of PET plastic waste in a membrane-free system to produce high-value formic acid and high-purity hydrogen production. This study provides an appealing route to facilitate the transformation process of PET plastic waste into high-value products with high efficiency, low cost and high purity.

Electrocatalytic water oxidation with a copper(II) polypeptide complex.

A self-assembly-formed triglycylglycine macrocyclic ligand (TGG(4-)) complex of Cu(II), [(TGG(4-))Cu(II)-OH(2)](2-), efficiently catalyzes water oxidation in a phosphate buffer at pH 11 at room temperature by a well-defined mechanism. In the mechanism, initial oxidation to Cu(III) is followed by further oxidation to a formal "Cu(IV)" with formation of a peroxide intermediate, which undergoes further oxidation to release oxygen and close the catalytic cycle. The catalyst exhibits high stability and activity toward water oxidation under these conditions with a high turnover frequency of 33 s(-1).

Atom transfer radical polymerization preparation and photophysical properties of polypyridylruthenium derivatized polystyrenes.

A ruthenium containing polymer featuring a short carbonyl-amino-methylene linker has been prepared by atom transfer radical polymerization (ATRP). The polymer was derived from ATRP of the N-hydroxysuccinimide (NHS) derivative of p-vinylbenzoic acid, followed by an amide coupling reaction of the NHS-polystyrene with Ru(II) complexes derivatized with aminomethyl groups (i.e., [Ru(bpy)2(CH3-bpy-CH2NH2)](2+) where bpy is 2,2'-bipyridine, and CH3-bpy-CH2NH2 is 4-methyl-4'-aminomethyl-2,2'-bipyridine). The Ru-functionalized polymer structure was confirmed by using nuclear magnetic resonance and infrared spectroscopy, and the results suggest that a high loading ratio of polypyridylruthenium chromophores on the polystyrene backbone was achieved. The photophysical properties of the polymer were characterized in solution and in rigid ethylene glycol glasses. In solution, emission quantum yield and lifetime studies reveal that the polymer's metal-to-ligand charge transfer (MLCT) excited states are quenched relative to a model Ru complex chromophore. In rigid media, the MLCT-ground state band gap and lifetime are both increased relative to solution with time-resolved emission measurements revealing fast energy transfer hopping within the polymer. Molecular dynamics studies of the polymer synthesized here as well as similar model systems with various spatial arrangements of the pendant Ru complex chromophores suggest that the carbonyl-amino-methylene linker probed in our target polymer provides shorter Ru-Ru nearest-neighbor distances leading to an increased Ru*-Ru energy hopping rate, compared to those with longer linkers in counterpart polymers.

Electrogenerated polypyridyl ruthenium hydride and ligand activation for water reduction to hydrogen and acetone to iso-propanol.

The complex [Ru(tpy)(bpy)(S)](2+) (tpy = 2,2':6',2''-terpyridine, bpy = 2,2'-bipyridine, S = solvent) is an electrocatalyst for water or proton reduction to hydrogen and for reduction of acetone to iso-propanol in CH3CN. Electrocatalysis is initiated by sequential 1e(-) reductions at the tpy and bpy ligands followed by addition of water to give a ruthenium hydride intermediate. Significant rate enhancements for hydrogen evolution are observed with added weak acids, such as H2PO4(-), for the latter, with a rate enhancement of 10(4) compared to water. The reactivity of the in situ electrogenerated hydride toward hydride transfer is promoted by ligand reduction.

Concerted O atom-proton transfer in the O-O bond forming step in water oxidation.

As the terminal step in photosystem II, and a potential half-reaction for artificial photosynthesis, water oxidation (2H(2)O --> O(2) + 4e(-) + 4H(+)) is key, but it imposes a significant mechanistic challenge with requirements for both 4e(-)/4H(+) loss and O-O bond formation. Significant progress in water oxidation catalysis has been achieved recently by use of single-site Ru metal complex catalysts such as [Ru(Mebimpy)(bpy)(OH(2))](2+) [Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl)pyridine; bpy = 2,2'-bipyridine]. When oxidized from to Ru(V) = O(3+), these complexes undergo O-O bond formation by O-atom attack on a H(2)O molecule, which is often the rate-limiting step. Microscopic details of O-O bond formation have been explored by quantum mechanical/molecular mechanical (QM/MM) simulations the results of which provide detailed insight into mechanism and a strategy for enhancing catalytic rates. It utilizes added bases as proton acceptors and concerted atom-proton transfer (APT) with O-atom transfer to the O atom of a water molecule in concert with proton transfer to the base (B). Base catalyzed APT reactivity in water oxidation is observed both in solution and on the surfaces of oxide electrodes derivatized by attached phosphonated metal complex catalysts. These results have important implications for catalytic, electrocatalytic, and photoelectrocatalytic water oxidation.