Rapid Mass Conversion for Environmental Microplastics of Diverse Shapes.

Rivers have been recognized as the primary conveyors of microplastics to the oceans, and seaward transport flux of riverine microplastics is an issue of global attention. However, there is a significant discrepancy in how microplastic concentration is expressed in field occurrence investigations (number concentration) and in mass flux (mass concentration). Of urgent need is to establish efficient conversion models to correlate these two important paradigms. Here, we first established an abundant environmental microplastic dataset and then employed a deep neural residual network (ResNet50) to successfully separate microplastics into fiber, fragment, and pellet shapes with 92.67% accuracy. We also used the circularity (C) parameter to represent the surface shape alteration of pellet-shaped microplastics, which always have a more uneven surface than other shapes. Furthermore, we added thickness information to two-dimensional images, which has been ignored by most prior research because labor-intensive processes were required. Eventually, a set of accurate models for microplastic mass conversion was developed, with absolute estimation errors of 7.1, 3.1, 0.2, and 0.9% for pellet (0.50 ≤ C < 0.75), pellet (0.75 ≤ C ≤ 1.00), fiber, and fragment microplastics, respectively; environmental samples have validated that this set is significantly faster (saves ∼2 h/100 MPs) and less biased (7-fold lower estimation errors) compared to previous empirical models.

Identification of high oxygen-consuming substances in stormwater drainage systems illicitly connected with sewage system.

The dissolved oxygen content in water is an important indicator for assessing the quality of the water environment, and maintaining a certain amount of dissolved oxygen is essential for the healthy development of the ecological environment. When a water body is anoxic, the activity of anaerobic microorganisms increases and organic matter is decomposed to produce a large number of blackening and odorizing substances, resulting in black and odorous water bodies, which is a very common and typical phenomenon in China. Presently, there is still a relatively universal occurrence of illicitly connected stormwater and sewage pipes in the urban drainage pipe network in China, which makes oxygen-consuming substances be directly discharged into rivers through stormwater pipes and consume the dissolved oxygen in the water bodies, resulting in an oxygen deficiency of the water. This induces seasonal or year-round black and stink phenomena in urban rivers. Hence, identifying high oxygen-consuming substances, which lays the foundation for the subsequent removal of oxygen-consuming substances, is essential. Through a series of comparisons of water quality indicators and analysis of organic characteristics, it was found that the oxygen consumption capacity of domestic sewage was higher than that of industrial wastewater in the selected area of this study, and the oxygen-consuming substances of domestic sewage were small molecular amino acids. By comparing 20 conventional free amino acids, it was found that seven of them consumed oxygen easily, and compared with chemical oxygen consumption, biological oxygen consumption was in a leading position.

A Novel Source of Radicals from UV/Dichloroisocyanurate for Surpassing Abatement of Emerging Contaminants Versus Conventional UV/Chlor(am)ine Processes.

Ultraviolet (UV)/chlor(am)ine processes are emerging advanced oxidation processes (AOPs) for water decontamination and raising continuous attention. However, limitations appear in the UV/hypochlorite and UV/monochloramine for removing specific contaminants ascribed to the differences in the sorts and yields of free radicals. Here, this study reports UV/dichloroisocyanurate (NaDCC) as a novel source of radicals. NaDCC was demonstrated to be a well-balanced compound between hypochlorite and monochloramine, and it had significant UV absorption and a medium intrinsic quantum yield. The UV/NaDCC produced more substantial hydroxyl radicals (·OH) and reactive chlorine species (RCSs, including Cl·, ClO·, and Cl2·-) than conventional UV/chlor(am)ine, thereby generating a higher oxidation efficiency. The reaction mechanisms, environmental applicability, and energy requirements of the UV/NaDCC process for emerging contaminants (ECs) abatement were further investigated. The results showed that ·OH and ·NH2 attacked ECs mostly through hydrogen atom transfer (HAT) and radical adduct formation, whereas Cl· destroyed ECs mainly through HAT and single electron transfer, with ClO· playing a certain role through HAT. Kinetic model analyses revealed that the UV/NaDCC outperformed the conventional UV/chlor(am)ine in a variety of water matrices with superior degradation efficiency, significantly saving up to 96% electrical energy per order. Overall, this study first demonstrates application prospects of a novel AOP using UV/NaDCC, which can compensate for the deficiency of the conventional UV/chlor(am)ine AOPs.

Zerovalent Iron/Cu Combined Degradation of Halogenated Disinfection Byproducts and Quantitative Structure-Activity Relationship Modeling.

Previous studies have reported that zerovalent iron (ZVI) can reduce several aliphatic groups of disinfection byproducts (DBPs) (e.g., haloacetic acids and haloacetamides) effectively, and the removal efficiency can be significantly improved by metallic copper. Information regarding ZVI/Cu combined degradation of different types of halogenated DBPs can help understand the fate of overall DBPs in drinking water distribution and storage systems consisting of unlined cast iron/copper pipes and related potential control strategies. In this study, we found that, besides aliphatic DBPs, many groups of new emerging aromatic DBPs formed in chlorinated and chloraminated drinking water can be effectively degraded by ZVI/Cu; meanwhile, total organic halogen and total ion intensity were reduced significantly after treatment. Moreover, a robust quantitative structure-activity relationship model was developed and validated based on the ZVI/Cu combined degradation rate constants of 14 typical aromatic DBPs; it can predict the degradation rate constants of other aromatic DBPs for screening and comparative purposes, and the optimized descriptors indicate that DBPs possessing a lower value of the lowest unoccupied molecular orbital energy and a higher value of dipole moment tend to present higher degradation rate constants. In addition, toxicity data of 47 DBPs (belonging to 18 groups) were predicted by two previously established toxicity models, demonstrating that, although most DBPs exhibit higher toxicity than their dehalogenated products, some DBPs show lower toxicity than their lowly halogenated analogs.

Decomposition of Total Organic Halogen Formed during Chlorination: The Iceberg of Halogenated Disinfection Byproducts Was Previously Underestimated.

Total organic halogen (TOX) is widely used as a surrogate bulk parameter to measure the overall exposure of halogenated disinfection byproducts (DBPs) in drinking water. In this study, we surprisingly found that the level of TOX in chlorinated waters had been significantly underestimated under common analytical conditions. After the addition of quenching agent sodium thiosulfate, total organic chlorine and total organic bromine exhibited a two-phase decomposition pattern with increasing contact time, and a significant decomposition was observed for different types of quenching agents, quenching doses, and pH conditions. More importantly, the decomposed TOX closely correlated with the acute toxicity of quenched water against luminous bacteria, implying that the DBPs responsible for TOX decomposition could be of important toxicological significance. Based on nontarget analysis by using high-resolution mass spectrometry, molecular formulas for the decomposed TOX were determined. After re-examining the mass balance of TOX in the context of unintentional decomposition, it was found that both the level and percentage of unknown TOX in chlorinated waters were considerably higher than historically thought. Overall, this study brings new insights into the knowledge of TOX formed during chlorination, providing important clues on the identification of toxicity driver in drinking water.

The performance and mechanism of iron-mediated chemical oxidation: Advances in hydrogen peroxide, persulfate and percarbonate oxidation.

Many studies have successfully built iron-mediated materials to activate or catalyze Fenton-like reactions, with applications in water and wastewater treatment being investigated. However, the developed materials are rarely compared with each other regarding their performance of organic contaminant removal. In this review, the recent advances of Fenton-like processes in homogeneous and heterogeneous ways are summarized, especially the performance and mechanism of activators including ferrous iron, zero valent iron, iron oxides, iron-loaded carbon, zeolite, and metal organic framework materials. Also, this work mainly compares three O-O bond containing oxidants including hydrogen dioxide, persulfate, and percarbonate, which are environmental-friendly oxidants and feasible for in-situ chemical oxidation. The influence of reaction conditions, catalyst properties and benefits are analyzed and compared. In addition, the challenges and strategies of these oxidants in applications and the major mechanisms of the oxidation process have been discussed. This work can help understand the mechanistic insights of variable Fenton-like reactions, the role of emerging iron-based materials, and provide guidance for choosing appropriate technologies when facing real-world water and wastewater applications.

Disinfection byproducts in indoor swimming pool water: Detection and human lifetime health risk assessment.

Quantification of regulated and emerging disinfection byproducts (DBPs) in swimming pool water, as well as the assessment of their lifetime health risk are limited in China. In this study, the occurrence of regulated DBPs (e.g., trihalomethanes, haloacetic acids) and emerging DBPs (e.g., haloacetonitriles, haloacetaldehydes) in indoor swimming pool water and the corresponding source water at a city in Eastern China were determined. The concentrations of DBPs in swimming pool water were 1-2 orders of magnitude higher than that in source water. Lifetime cancer and non-cancer risks of DBPs stemming from swimming pool water were also estimated. Inhalation and dermal exposure were the most significant exposure routes related to swimming pool DBP cancer and non-cancer risks. For the first time, buccal and aural exposure were considered, and were proven to be important routes of DBP exposure (accounting for 17.9%-38.9% of total risk). The cancer risks of DBPs for all swimmers were higher than 10-6 of lifetime exposure risk recommended by United States Environmental Protection Agency, and the competitive adult swimmers experienced the highest cancer risk (7.82 × 10-5). These findings provide important information and perspectives for future efforts to lower the health risks associated with exposure to DBPs in swimming pool water.

Identification of key precursors contributing to the formation of CX3R-type disinfection by-products along the typical full-scale drinking water treatment processes.

Identification and characterization of disinfection by-product (DBP) precursors could help optimize drinking water treatment processes and improve the quality of finished water. This study comprehensively investigated the characteristics of dissolved organic matter (DOM), the hydrophilicity and molecule weight (MW) of DBP precursor and DBP-associated toxicity along the typical full-scale treatment processes. The results showed that dissolved organic carbon and dissolved organic nitrogen content, the fluorescence intensity and the SUVA254 value in raw water significantly decreased after the whole treatment processes. Conventional treatment processes were in favor of the removal of high-MW and hydrophobic DOM, which are important precursors of trihalomethane and haloacetic acid. Compared with conventional treatment processes, Ozone integrated with biological activated carbon (O3-BAC) processes enhanced the removal efficiencies of DOM with different MW and hydrophobic fractions, leading to a further decrease in almost all DBP formation potential and DBP-associated toxicity. However, almost 50% of the detected DBP precursors in raw water has not been removed after the coagulation-sedimentation-filtration integrated with O3-BAC advanced treatment processes. These remaining precursors were found to be mainly hydrophilic and low-MW (< 1.0 kDa) organics. Moreover, they would largely contribute to the formation of haloacetaldehydes and haloacetonitriles, which dominated the calculated cytotoxicity. Since current drinking water treatment process could not effectively control the highly toxic DBPs, the removal of hydrophilic and low-MW organics in drinking water treatment plants should be focused on in the future.

Does Snowfall Introduce Disinfection By-product Precursors to Surface Water?

Snow with large specific surface area and strong adsorption capacity can effectively adsorb atmospheric pollutants, which could/might lead to the increase of disinfection by-product (DBP) precursors in surface water. In this study, the contents and characteristics of dissolved organic matter (DOM) in meltwater were investigated, and DBP formation and the DBP-associated cytotoxicity index during chlorination of meltwater was first explored. Overall, meltwater exhibited high nitrogen contents. Meltwater-derived DOM was mainly composed of organics with low molecular weights, low aromaticity, and high unsaturated degrees. DBP formation potentials and cytotoxicity indexes in chlorinated meltwater were positively correlated with air quality index and were significantly impacted by snowfall stages. The trihalomethane and haloacetic acid yields from meltwater were relatively low, while yields of highly cytotoxic DBPs, especially halonitromethanes (6.3-10.8 µg-HNMs/mg-DOC), were significantly higher than those of surface water (1.7 µg-HNMs/mg-DOC). Notably, unsaturated nonaromatic organic nitrates in meltwater were important precursors of halonitromethanes. The actual monitoring results showed that snowfall significant increased the haloacetaldehydes and nitrogenous DBP formation levels of surface water. Considering increased DBP formation and DBP-associated toxicity, it was demonstrated that DOM derived from snowfall in atmosphere-polluted areas could deteriorate surface water quality and pose potential risks to drinking water.

Electronic Control of Traditional Iron-Carbon Electrodes to Regulate the Oxygen Reduction Route to Scale Up Water Purification.

Shifting four-electron (4e-) oxygen reduction in fuel cell technology to a two-electron (2e-) pathway with traditional iron-carbon electrodes is a critical step for hydroxyl radical (HO•) generation. Here, we fabricated iron-carbon aerogels with desired dimensions (e.g., 40 cm × 40 cm) as working electrodes containing atomic Fe sites and Fe3C subnanoclusters. Electron-donating Fe3C provides electrons to FeN4 through long-range activation for achieving the ideal electronic configuration, thereby optimizing the binding energy of the *OOH intermediate. With an iron-carbon aerogel benefiting from finely tuned electronic density, the selectivity of 2e- oxygen reduction increased from 10 to 90%. The resultant electrode exhibited unexpectedly efficient HO• production and fast elimination of organics. Notably, the kinetic constant kM for sulfamethoxazole (SMX) removal is 60 times higher than that in a traditional iron-carbon electrode. A flow-through pilot device with the iron-carbon aerogel (SA-Fe0.4NCA) was built to scale up micropolluted water decontamination. The initial total organic carbon (TOC) value of micropolluted water was 4.02 mg L-1, and it declined and maintained at 2.14 mg L-1, meeting the standards for drinking water quality in China. Meanwhile, the generation of emerging aromatic nitrogenous disinfection byproducts (chlorophenylacetonitriles) declined by 99.2%, satisfying the public safety of domestic water. This work provides guidance for developing electrochemical technologies to satisfy the flexible and economic demand for water purification, especially in water-scarce areas.

Identification, Occurrence, and Cytotoxicity of Haloanilines: A New Class of Aromatic Nitrogenous Disinfection Byproducts in Chloraminated and Chlorinated Drinking Water.

Identifying disinfection byproducts (DBPs) with high health risk is an unresolved challenge. In this study, six members of a new class of aromatic nitrogenous DBPs─2-chloroaniline, 2-bromoaniline, 2,4-dichloroaniline, 2-chloro-4-bromoaniline, 4-chloro-3-nitroaniline, and 2-chloro-4-nitroaniline─are reported as DBPs in drinking water for the first time. Haloanilines completely degraded within 1 h in the presence of chlorine (1 mg/L), while about 20% remained in the presence of chloramine (1 mg/L) after 120 h. Haloanilines showed high stability in the absence of disinfectants, with <30% degradation at pH 5-9 over 120 h. Eight haloanilines were determined in chloraminated finished water and tap water at total concentrations of up to 443 ng/L. The most abundant was 2-bromoaniline, with a median concentration of 104 ng/L. The cytotoxicity of eight haloanilines and regulated trichloromethane and dichloroacetic acid (DCAA) was evaluated using Hep G2 cell assay. The EC50 values of eight haloanilines were 1-2 orders of magnitude lower than those of the regulated DBPs. The lowest toxic concentration of 2-chloro-4-nitroaniline was 1 µM, 500 times lower than that of DCAA. The formation and control of haloanilines in drinking water warrant further investigation.

Comparative Toxicity Analyses from Different Endpoints: Are New Cyclic Disinfection Byproducts (DBPs) More Toxic than Common Aliphatic DBPs?

In recent years, dozens of halogenated disinfection byproducts (DBPs) with cyclic structures were identified and detected in drinking water globally. Previous in vivo toxicity studies have shown that a few new cyclic DBPs possessed higher developmental toxicity and growth inhibition rate than common aliphatic DBPs; however, in vitro toxicity studies have proved that the latter exhibited higher cytotoxicity and genotoxicity than the former. Thus, to provide a more comprehensive toxicity comparison of DBPs from different endpoints, 11 groups of cyclic DBPs and nine groups of aliphatic DBPs were evaluated for their comparative in vitro and in vivo toxicity using human hepatoma cells (Hep G2) and zebrafish embryos. Notably, results showed that the in vitro Hep G2 cytotoxicity index of the aliphatic DBPs was nearly eight times higher than that of the cyclic DBPs, whereas the in vivo zebrafish embryo developmental/acute toxicity indexes of the cyclic DBPs were roughly 48-50 times higher than those of the aliphatic DBPs, indicating that the toxicity rank order differed when different endpoints were applied. For a broader comparison, a Pearson correlation analysis of DBP toxicity data from nine different endpoints was conducted. It was found that the observed Hep G2 cytotoxicity and zebrafish embryo developmental/acute toxicity in this study were highly correlated with the previously reported in vitro CHO cytotoxicity and in vivo toxicity in aquatic organisms (P < 0.01), respectively. However, the observed in vitro toxicity had no correlation with the in vivo toxicity (P > 0.05), suggesting that the toxicity rank orders obtained from in vitro and in vivo bioassays had large discrepancies. According to the observed toxicity data in this study and the candidate descriptors, two quantitative structure-activity relationship (QSAR) models were established, which help to further interpret the toxicity mechanisms of DBPs from different endpoints.

Evaluation of N-acetylcysteine and glutathione as quenching agents for the analysis of halogenated disinfection by-products.

Disinfection by-products (DBPs), formed from the reactions of disinfectants with natural organic matter and halides in drinking water, were considered to be cytotoxic and genotoxic, and might trigger various cancers. The relatively low concentration of DBPs in finished water (low µg/L or even ng/L levels) and the interference from water matrix inhibited in situ determination of DBPs. Moreover, the further formation and degradation of DBPs by disinfectants during the holding time (several hours to several days) from sample collection to analysis could adversely affect the determination of DBPs. To obtain accurate, precise and reliable data of DBP occurrence and formation, robust and reliable sample preservation is indispensable. However, the commonly used quenching agents (e.g., sodium sulfite, sodium thiosulfate, and ascorbic acid) for sample preservation can decompose reactive DBPs by reductive dehalogenation. This study evaluated the performance of N-acetylcysteine (NAC) and glutathione (GSH) as quenching agents for the analysis of halogenated DBPs by investigating the stoichiometry of the disinfectant-quenching agent reaction, the formation of DBPs during chlor(am)ination of NAC or GSH, and the effects of NAC or GSH on the stability of 18 individual DBPs and total organic halogen (TOX). Based on the results of this study, NAC and GSH were considered to be ideal quenching agents for the analysis of most DBPs and TOX, except halonitromethanes.

Accelerated Fe2+ Regeneration in an Effective Electro-Fenton Process by Boosting Internal Electron Transfer to a Nitrogen-Conjugated Fe(III) Complex.

The regeneration rate of Fe2+ from Fe3+ dictates the performance of the electro-Fenton (EF) process, represented by the amount of produced hydroxyl radicals (·OH). Current strategies for the acceleration of Fe2+ regeneration normally require additional chemical reagents, to vary the redox potential of Fe2+/Fe3+. Here, we report an attempt at using the intrinsic property of the electrode to our advantage, i.e., nitrogen-doped carbon aerogel (NDCA), as a reducing agent for the regeneration of Fe2+ without using foreign reagents. Moreover, the pyrrolic N in NDCA provides unpaired electrons through the carbon framework to reduce Fe3+, while the graphitic and pyridinic N coordinate with Fe3+ to form a C-O-Fe-N2 bond, facilitating electron transfer from both the external circuit and pyrrolic N to Fe3+. Our Fe2+/NDCA-EF system exhibits a 5.8 ± 0.3 times higher performance, in terms of the amount of generated ·OH, than a traditional Fenton system using the same Fe2+ concentration. In the subsequent reaction, the Fe2+/NDCA-EF system demonstrates 100.0% removal of dimethyl phthalate, 3-chlorophenol, bisphenol A, and sulfamethoxazole with a low specific energy consumption of 0.17-0.36 kW·h·g-1. Furthermore, 90.1 ± 0.6% removal of dissolved organic carbon and 83.3 ± 0.9% removal of NH3-N are achieved in the treatment of domestic sewage. The purpose of this work is to present a novel strategy for the regeneration of Fe2+ in the EF process and also to elucidate the role of different N species of the carbonaceous electrode in contributing to the redox cycle of Fe2+/Fe3+.

A New Group of Heterocyclic Nitrogenous Disinfection Byproducts (DBPs) in Drinking Water: Role of Extraction pH in Unknown DBP Exploration.

pH adjustment prior to extraction is an important step in water sample pretreatment processes for exploration of new/unknown disinfection byproducts (DBPs) in drinking water. To achieve a better extraction efficiency, the pH of a water sample is usually adjusted to a low level (e.g., < 0.5) to ensure that target DBPs are in their neutral forms. However, such a practice may elude some amphoteric DBPs (especially those nitrogenous DBPs with multiple functional groups), which can accept protons at a low pH and lose protons at a high pH. In this study, with careful extraction pH selection and optimization, we first report the detection and identification of a new group of heterocyclic nitrogenous DBPs, halogenated pyridinols, in simulated drinking water using ultra performance liquid chromatography/electrospray ionization-triple quadrupole mass spectrometry and time-of-flight mass spectrometry, including 5-chloro-3-pyridinol, 2-bromo-3-pyridinol, 2,6-dichloro-4-pyridinol, 2,6-dibromo-3-pyridinol, 3-bromo-2-chloro-5-pyridinol, 5-bromo-2-chloro-3-pyridinol, 3,5,6-trichloro-2-pyridinol, and 2,4,6-tribromo-3-pyridinol. On the basis of the speciation of dissociated chemical species and recovery tests at different extraction pH values, it was found that, only at a pH of 3.0, all the eight new DBPs could achieve recoveries of >50%. With subsequent instrumental parameter optimization, the method detection and quantitation limits of the eight new DBPs were determined to be 0.04-1.58 and 0.15-4.11 ng/L, respectively. The optimized method enabled an accurate detection of the eight new DBPs in two real drinking water samples. Further aided with in vivo developmental and acute toxicity assays using zebrafish embryos, the developmental and acute toxicity of the new DBPs were found to be slightly lower than those of halogenated benzoquinones but dozens of times higher than those of commonly known DBPs such as tribromomethane and iodoacetic acid.

Ozonation Treatment Increases Chlorophenylacetonitrile Formation in Downstream Chlorination or Chloramination.

Chlorophenylacetonitriles (CPANs) are an emerging group of aromatic nitrogenous disinfection byproducts (DBPs). However, their dominant precursors and formation pathways remain unclear, which hinders the further development of effective control strategies. For the first time, CPAN precursors were screened by conducting formation potential (FP) tests on real water samples from six drinking water treatment plants (DWTPs). The average overall removal of CPAN precursors across all six DWTPs was only 10%. Moreover, ozonation increased CPAN precursors by 140% on average. Fluorescence spectroscopy showed a dramatic reduction in aromatic proteins, tyrosine-like proteins, and tryptophan-like proteins following ozonation. Low-apparent-molecular-weight (AMW) (<1 kDa) substances were correlated with the CPAN FP in these samples. We therefore hypothesized that protein fragments with low AMW, such as amino acids, are important CPAN precursors during downstream chlor(am)ination. Two aromatic free amino acids, tyrosine and tryptophan, were selected to investigate the formation of CPANs during chlor(am)ination. Both amino acids were found to act as CPAN precursors for the first time. CPAN formation pathways from these model precursors were proposed based on the frontier molecular orbital theory and intermediate products identified using high-resolution mass spectrometry. This study provides a powerful theoretical foundation for controlling CPAN formation in drinking water.

Characterization of Dissolved Organic Matter and Its Derived Disinfection Byproduct Formation along the Yangtze River.

The Yangtze River basin covers one-fifth of China's land area and serves as a water source for one-third of China's population. During long-distance water transport from upstream to downstream, various sources of dissolved organic matter (DOM) lead to considerable variation in DOM properties, significantly impacting water treatability and disinfection byproduct (DBP) formation after chlorination. Using size-exclusion chromatography and fluorescence spectroscopy, the spatial variation in DOM characteristics was comprehensively investigated on a basin scale. The formation of 36 DBPs and speciated total organic halogen in chlorinated samples was determined. Overall, the Yangtze River waters featured a high proportion of terrestrially derived humic substances that served as important precursors for trihalomethanes and haloacetic acids, which was responsible for the increase in total DBP formation along the Yangtze River. The downstream waters were characterized by high levels of microbially derived protein-like biopolymers, which significantly contributed to the formation of haloacetaldehydes and haloacetonitriles that dominated DBP-associated mammalian cell cytotoxicity. Moreover, the precursors of haloacetaldehydes and haloacetonitriles in downstream waters were highly hydrophilic, posing a challenge for water treatment. This study presents an extensive basin-scale study, providing insights into DOM variations along the Yangtze River, illustrating the impact of DOM properties on drinking water from a DBP perspective.

In Situ-Formed PdFe Nanoalloy and Carbon Defects in Cathode for Synergic Reduction-Oxidation of Chlorinated Pollutants in Electro-Fenton Process.

Complete dechlorination and mineralization of chlorophenols via the reduction-oxidation-mediated electro-Fenton process with a composite bulk cathode is first proposed. The in situ formation of a PdFe nanoalloy and carbon defects as key active sites is mutually induced during the formation of a carbon aerogel-based electrode. Specifically, the PdFe nanoalloy promotes the generation of [H]ads as reduction sites and improves the electron transfer via an electrical circuit, while the carbon defects selectively favor the 2e- oxygen reduction pathway. Notably, this work implies a novel electrocatalytic model for the formation of ·OH via (2 + 1)e- oxygen reduction by a consecutive reaction with carbon defects and a PdFe nanoalloy. Complete total organic carbon removal and dechlorination of 3-chlorophenol were performed after 6 h. The kinetic rate constant for removing haloacetamides (HAMs) in drinking water was 0.21-0.41 h-1, and the degradation efficiency was self-enhanced after electrolysis for 2 h because of the increased concentration of [H+]. The specific energy consumption was ∼0.55 W·h·g-1 at 100% removal of some HAMs, corresponding to a power consumption of 0.6-1.1 kW·h for complete dehalogenation per ton of drinking water in waterworks. Moreover, the PdFe alloy/CA exhibited extreme mechanical and electrochemical stability with limited iron (∼0.07 ppm) and palladium (0.02 ppm) leaching during the actual application.

Overlooked Role of Fe(IV) and Fe(V) in Organic Contaminant Oxidation by Fe(VI).

Fe(VI) has received increasing attention since it can decompose a wide range of trace organic contaminants (TrOCs) in water treatment. However, the role of short-lived Fe(IV) and Fe(V) in TrOC decomposition by Fe(VI) has been overlooked. Using methyl phenyl sulfoxide (PMSO), carbamazepine, and caffeine as probe TrOCs, we observed that the apparent second-order rate constants (kapp) between TrOCs and Fe(VI) determined with the initial kinetics data were strongly dependent on the initial molar ratios of TrOCs to Fe(VI). Furthermore, the kapp value increases gradually as the reaction proceeds. Several lines of evidence suggested that these phenomena were ascribed to the accumulation of Fe(IV) and Fe(V) arising from Fe(VI) decay. Kinetic models were built and employed to simulate the kinetics of Fe(VI) self-decay and the kinetics of PMSO degradation by Fe(VI). The modeling results revealed that PMSO was mainly degraded by Fe(IV) and Fe(V) rather than by Fe(VI) per se and Fe(V) played a dominant role, which was also supported by the density functional theory calculation results. Given that Fe(IV) and Fe(V) have much greater oxidizing reactivity than Fe(VI), this work urges the development of Fe(V)/Fe(IV)-based oxidation technology for efficient degradation of TrOCs.

Degradation of imidacloprid by UV-activated persulfate and peroxymonosulfate processes: Kinetics, impact of key factors and degradation pathway.

UV-activated persulfate (UV/PS) and peroxymonosulfate (UV/PMS) processes as alternative methods for removal of imidacloprid (IMP) were conducted for the first time. The reaction rate constants between IMP and the sulfate or hydroxyl radical were calculated as 2.33×109  or 2.42×1010 M-1 s-1, respectively. The degradation of IMP was greatly improved by UV/PS and UV/PMS compared with only UV or oxidant. At any given dosage, UV/PS achieved higher IMP removal rate than UV/PMS. The pH range affecting the degradation in the UV/PS and UV/PMS systems were different in the ranges of 6-8 and 9 to 10. SO42-, F- and NO3- had no obvious effect on the degradation in the UV/PS and UV/PMS systems. CO32- and PO43- inhibited the degradation of IMP in the UV/PS system, while they enhanced the degradation in the UV/PMS system. Algae organic matters (AOM) were used to consider the impact of the degradation of IMP for the first time. The removal of IMP were restrained by both AOM and natural organic matters. The higher removal rate of IMP demonstrated that both UV/PS and UV/PMS were suitable for treating the water containing IMP, while UV/PS was cost-effective than UV/PMS based on the total cost calculation. Finally, the degradation pathways of IMP were proposed.