Bleaching of photodarkening in Tm-doped silica fiber with deuterium loading.

We demonstrate the rapid photodarkening (PD) phenomenon in Tm-doped fiber (TDF) core pumped by a laser at 1080 nm and the bleaching effect of deuterium (${{\rm D}_2}$D2) on PD TDF. By ${{\rm D}_2}$D2 loading for seven days, the PD-induced excess loss (PIEL) in the visible (VIS) and near-infrared (NIR) region have been largely eliminated, and no degradation was observed within 30 days. PD resistance of the ${{\rm D}_2}$D2 pretreated TDF has been investigated as well. The formation of color centers based on defects and precursors in the silica matrix and the mechanism of ${{\rm D}_2}$D2 bleaching are discussed.

Impact of gamma-ray radiation-induced photodarkening on mode instability degradation of an ytterbium-doped fiber amplifier.

The laser performance of a high-power ytterbium-doped fiber amplifier is mainly hindered by the onset of mode instability. In this work, the slope efficiency and mode instability threshold of the ytterbium-doped fiber under various gamma-ray radiation doses have been measured. Experimental results reveal that gamma-ray radiation-induced photodarkening degrades mode instability severely, and gamma-ray radiation-induced mode instability degradation can be partly bleached by hours of pump-light injection. It is shown that gamma-ray radiation-induced photodarkening results in a steep reduction of slope efficiency and mode instability threshold; moreover, the entire irradiated fiber can be partly bleached by hours of pump-light injection and exhibits both time and gamma-ray radiation-dose saturation properties. The experimental results indicate that mode instability mitigation can be partly realized by pump-light injection and implies photodarkening suppression is beneficial for TMI mitigation, which is very promising for the advancement of high-power fiber lasers.

Radical passive bleaching of Tm-doped silica fiber with deuterium.

We demonstrate the almost complete 2 µm laser power recovery of the gamma-ray-irradiated thulium (Tm)-doped silica fiber under deuterium loading. The optical-optical slope efficiency and the cladding absorption spectra of the Tm-doped fiber with gamma-ray irradiation and deuterium treatment have been measured for comparison. It was found that the slope efficiency of the irradiated Tm-doped fiber could be recovered to 96.1% of the pristine after deuterium bleaching, which significantly degraded from 60.7% to 25.3% after irradiation. Meanwhile, the additional absorption attenuation of the irradiated Tm-doped with D2 treatment completely vanished. Based on the comprehensive comparison of cladding absorption spectra, the probable mechanism of the deuterium bleaching effect on irradiated Tm-doped fiber has also been discussed.

Active radiation hardening of Tm-doped silica fiber based on pump bleaching.

Tm-doped fiber laser or amplifier can be applied in varied adverse environments. In this work, we demonstrate the pump bleaching of Tm-doped silica fiber with 793nm pump source under gamma-ray irradiation in the range 50Gy-675Gy. The recovery time, the fiber slope efficiency and the fiber cladding absorption spectra after irradiation and bleaching have been measured. It is found that the recovery time and radiation induce absorption are positively associated with doses, however, the fiber slope efficiency of irradiated TDF and bleached TDF are both negatively correlated with doses. Based on the simulation of the fiber core temperature, the probable mechanism of pump bleaching is also discussed.

Pump bleaching of Tm-doped fiber with 793 nm pump source.

We demonstrate, for the first time to our knowledge, the strong recovery of the optical-optical slope efficiency of gamma-ray-irradiated Tm-doped fiber under 793 nm laser diode (LD) pumping. The fiber optical-optical slope efficiency, the fiber cladding absorption spectra, and the fluorescence spectra of the Tm-doped fiber before and after 500 Gy gamma-ray irradiation have been measured for comparison. It is found that the fiber optical-optical slope efficiency had significant degradation from 56.3% to 26.7% after irradiation and recovered to 40.8% after 15 h pump bleaching. Based on comparative analysis of fiber cladding absorption spectra among pristine fiber, irradiation, and bleaching, the reasons for the strong recovery have also been discussed.

A hollow beam supercontinuum generation by the supermode superposition in a GeO2 doped triangular-core photonic crystal fiber.

A GeO2 doped triangular-core photonic-crystal fiber (PCF) is designed and fabricated to allow the generation of a hollow beam through a nonlinear-optical transformation by femtosecond pulses at 1040 nm from a high power Yb-doped PCF laser oscillator. The hollow beam supercontinuum is obtained at far field by adjusting incident light polarization to excite the high order supermode, behaving as a mode convertor. The supercontinuum ranging from 540 to 1540 nm is achieved with an average power of 1.04 W.

Multiwatt octave-spanning supercontinuum generation in multicore photonic-crystal fiber.

High-power supercontinuum spanning over more than an octave was generated using a high power femtosecond fiber laser amplifier and a multicore nonlinear photonic crystal fiber (PCF). Long multicore PCFs (as long as 20 m in our experiments) are shown to enable supercontinuum generation in an isolated fundamental supermode, with the manifold of other PCF modes suppressed due to the strong evanescent fields coupling between the cores, providing a robust 5.4 W coherent supercontinuum output with a high spatial and spectral quality within the range of wavelengths from 500 to 1700 nm.

All-photonic-crystal-fiber coherent black-light source.

Photonic-crystal fibers (PCFs) are widely recognized as efficient sources of white-light supercontinuum. Here, we show that a combination of an ultrashort-pulse ytterbium PCF laser with a highly nonlinear PCF enables all-fiber generation of ultrashort pulses of coherent UV radiation in the black-light spectral region with all the key processes, such as lasing, amplification, and conversion of the amplified PCF-laser output to the UV range, taking place in specifically designed fiber components.

[Preliminary study of femtosecond laser sclerostomy ab externo in a rabbit model of chronic ocular hypertension].

OBJECTIVE: To explore the feasibility, efficacy and safety of performing ab externo sclerostomy with a femtosecond laser in rabbits with chronic ocular hypertension. METHOD: The chronic ocular hypertension model was induced by injecting α-chymotrypsin into posterior chamber. Twenty rabbits with chronic ocular hypertension were randomly divided into experiment and control groups, each group consisting of 10 rabbits. An ab externo sclerostomy using a femtosecond laser was performed in the right eyes in the experiment group. The right eyes in control group were unoperated. The laser was a pulsed titanium-sapphire laser, operating at a repetition rate of 1000 per second, 0.4 mJ pulse energy, a central wavelength of 800 nm and a pulse duration of 50 femtoseconds. The survival of filtration blebs, clinical manifestation and intraocular pressure (IOP) were observed for 1 month after surgery. Animals were killed on days 3, 7, 14 and 30 post-operatively. Hematoxylin and eosin (HE) staining and scanning electron microscopy (SEM) were performed to evaluate the histopathologic changes in filtering tracts. The differences in IOP between the experiment and control groups were analyzed by repeated measures analysis of variance. RESULTS: A 2 mm × 1 mm clear full-thickness scleral incision was created in each eye in the experiment group which was hit only once by the laser. The laser treated time was approximately 15 - 16 s. There was a significant difference (F = 117.46, 39.96, 15.17, 11.62, 15.31, 11.10; P < 0.01). IOP between experiment and control groups at post-operatively day 1, 3, 7, 14, 21, 30. No serious intra- or post-operative complications happened in the treated eyes except for anterior chamber hemorrhage in 2 eyes triggered by laser injury to iris root. A conjunctival bleb was successfully formed in all treated eyes at 1 day after surgery and lasted from 14 to 21 days. Histopathology showed that the perforating scleral incisions created by femtosecond laser were sharply defined, with almost no collateral damage to the surrounding tissue. The tissue repair response in the filtering tracts was characterized by mild hyperplasia of fibroblasts and the loose deposition of a small amount of new collagen fibers. CONCLUSION: The current study demonstrates that ab externo femtosecond laser sclerostomy is a feasible, safe and effective option for the treatment of glaucoma.

External sclerostomy with the femtosecond laser versus a surgical knife in rabbits.

AIM: To experimentally compare the external sclerostomy produced using a femtosecond laser with that made by a surgical knife and to evaluate the healing patterns, efficacy and technical advantages of femtosecond laser sclerostomy. METHODS: In a prospective randomized, controlled, masked-observer study, 10 pigmented rabbits underwent external sclerostomy with a femtosecond laser in the right eye; 10 additional rabbits underwent sclerostomy with a surgical superblade in the right eye. Clinical characteristics, which included bleb morphology and intraocular pressure, were recorded for 1 month after surgery. Six additional rabbits underwent external femtosecond laser sclerostomy in the right eye and mechanical sclerostomy in the left eye and were killed at day 14 after surgery. Histologic staining, immunohistochemistry and scanning electron microscopy were subsequently performed to assess the morphology of the filtering fistula. The titanium-sapphire femtosecond laboratory laser was operating at a repetition rate of 1 kHz, 0.4 mJ pulse energy, a central wavelength of 800nm and a pulse duration of 50 femtoseconds. Mann-Whitney and Kaplan-Meier tests were used for statistical analysis. RESULTS: Successful complete sclerostomy was achieved in each laser-treated eye which was hit only once by the laser. The laser treated time was approximately 15s-16s. In the laser-treated group (n=16), 2 eyes (12%) developed mild hyphema at the site of entry and 8 eyes (50%) showed transient edema in the corneal periphery adjacent to the laser impact zone. The differences between the groups in duration of function blebs and pressure reduction were statistically significant (P=0.025 and 0.016, respectively). The success rate of the laser-treated group was significantly higher than the knife group (P=0.005). Histologically, the subconjunctival connective tissue was loosely arranged with partially patent sclerostomy in the laser-treated eyes at postoperative day 14. This contrasted with the completely scarred sclerostomy tract in the knife group. The mean numbers of fibroblasts and new vessels as well as the amount of new collagen deposition at bleb site were significantly decreased in the laser group (P=0.045, 0.013 and 0.036, respectively). CONCLUSION: The current study demonstrates that external femtosecond laser sclerostomy may offer a safe and effective alternative for the minimally invasive surgical management of glaucoma.