Evaluation of bone contact area and intercondylar distance changes in orthognathic surgery - a comparison between BSSO and HSSO technique depending on mandibular displacement extent.

OBJECTIVES: The present study aims to assess the impact of bilateral and high oblique sagittal split osteotomy (BSSO/HSSO), as well as displacement distances and directions on the expected and achievable bone contact area (BCA) and changes in the intercondylar distance (ICD). The primary question addressed is whether mandibular splitting through BSSO results in a greater BCA and/or ICD when compared to splitting through HSSO. MATERIALS AND METHODS: Totally 80 mandibular displacements were performed on 20 fresh cadavers, for each subject, four splints were produces to facilitate mandibular advancement as well as setbacks of 4 and 8 mm. Pre- and postoperative CBCT scans were performed to plan the surgical procedures and to analyze the expected and achieved BCA and ICD. RESULTS: Regarding the maximum mandibular displacement, the expected BCA for HSSO/BSSO were 352.58 ± 96.55mm2 and 1164.00 ± 295.50mm2, respectively, after advancement and 349.11 ± 98.42mm2 and 1344.70 ± 287.23mm2, respectively, after setback. The achieved BCA for HSSO/BSSO were 229.37 ± 75.90mm2 and 391.38 ± 189.01mm2, respectively, after advancement and 278.03 ± 97.65mm2 and 413.52 ± 169.52 mm2, respectively after setback. The expected ICD for HSSO/BSSO were 4.51 ± 0.73 mm and 3.25 ± 1.17 mm after advancement and - 5.76 ± 1.07 mm and - 4.28 ± 1.58 mm after setback. The achieved ICD for HSSO/BSSO were 2.07 ± 2.9 mm and 1.7 ± 0.60 mm after advancement and - 2.57 ± 2.78 mm and - 1.28 ± 0.84 mm after setback. Significant differences between the BCA after HSSO and BSSO were at each displacement (p < 0.001), except for the achieved BCA after 8-mm setback and advancement (p ≥ 0.266). No significant differences were observed regarding ICD, except for the expected ICD after 8-mm setback and advancement (p ≤ 0.037). CONCLUSIONS: Compared to the virtual planning, the predictability regarding BCA and ICD was limited. ICD showed smaller clinical changes, BCA decreased significantly in the BSSO group. CLINICAL RELEVANCE: BCA and ICD might have been less important in choosing the suitable split technique. in orthognathic surgery.

Performance of dental students, orthodontic residents, and orthodontists for classification of midpalatal suture maturation stages on cone-beam computed tomography scans - a preliminary study.

BACKGROUND: Assessment of midpalatal suture maturation on cone-beam computed tomography (CBCT) scans is performed by visual inspection and is therefore subjective. The extent to which the assessment of midpalatal suture maturation is affected by rater experience has not been adequately explored in the existing literature, thus limiting the availability of evidence-based findings. This study compared the outcomes of classification by dental students, orthodontic residents, and orthodontists. METHODS: Three different groups of students, orthodontic residents, and orthodontists evaluated 10 randomly chosen CBCT scans regarding midpalatal suture maturation from a pool of 179 patients (98 female and 81 male patients) aged 8 - 40 years which were previously classified by evaluating CBCT scans. The pool was set as benchmark utilizing midpalatal suture maturation classification by one examiner (OsiriX Lite version 11.0; Pixmeo SARL, Bernex, Switzerland). For assessment of intra-rater reliability of the examiners of each group the randomly chosen subjects were reclassified for midpalatal suture maturation after a wash-out period of two weeks by using the same software. Statistical analysis was performed to evaluate intra- and interrater reliability of the three groups with differing experience level. RESULTS: Groupwise intra-rater reliability assessment between the classification and reclassification was weak for examiners with a low level of experience (k = 0.59). Orthodontists had highest degree of agreement with regard to benchmark classification with an inter-rater reliability to be considered as moderate (k = 0.68). CONCLUSIONS: Assessment of midpalatal suture maturation on CBCT scans appears to be a subjective process and is considerably related to the experience level of the examiner. A high level of clinical experience seems to be favorable but does not necessarily ensure accurate results.

General correlation between neonatal factors, primary and permanent tooth eruption and their interrelation in a population in german orthodontic practices.

BACKGROUND: The purpose of the study was to determine the possible relationship between the eruption of primary and permanent teeth and neonatal factors in German children according to gender. METHODS: A cross-sectional survey study was performed in 10 German orthodontic practices. Using a questionnaire information about gender, time of birth (week of pregnancy), birth weight (g) and height (cm), and the age of first primary and first permanent tooth eruption (months/years) of 405 children (230 girls and 175 boys) were collected. A Mann-Whitney U-test was used for group comparisons, and correlations were verified using a Pearson test. RESULTS: No correlation was found between neonatal factors (time of birth, birth weight, and birth height) and primary tooth eruption for male participants. However, for females a low correlation was found between the eruption of the first primary tooth and birth weight (r = -0.18, CI: -0.30 to -0.042, p = 0.011) and birth height (r = -0.19, CI: -0.32 to -0.054, p = 0.006). No correlations between neonatal factors and the eruption of the first permanent tooth were found for either gender. A moderate correlation was found between the first primary and first permanent tooth eruption (females: r = 0.30, CI: 0.16 to 0.43, p < 0.001; males: r = 0.22, CI: 0.059 to 0.35, p = 0.008). CONCLUSIONS: An earlier eruption of the primary teeth can be assumed with greater body weight and height at the time of birth for girls. For boys, the tendency is the opposite. However, there seems to be a catch-up growth effect due to the missing differences between both permanent tooth eruption times. Nevertheless, the first primary and the first permanent tooth eruption correlates in a German children population.

Development of root resorption during orthodontic tooth movement after cleft repair using different grafting materials in rats.

OBJECTIVE: The aim of the present study was to investigate the influence of three grafting materials for cleft repair on orthodontic tooth movement in rats. MATERIALS AND METHODS: Artificial alveolar clefts were created in 21 Wistar rats and were repaired 4 weeks later using autografts, human xenografts and synthetic bone substitute (beta-tricalcium phosphate/hydroxyapatite [ß-TCP/HA]). A further 4 weeks later, the first molar was moved into the reconstructed maxilla. Microfocus computed tomography (µCT) was performed six times (T0-T5) to assess the tooth movement and root resorption. After 8 weeks, the affected reconstructed jaw was resected for histopathological investigation. RESULTS: Total distances reached ranged from 0.82 ± 0.72 mm (ß-TCP/HA) to 0.67 ± 0.27 mm (autograft). The resorption was particularly determined at the mesiobuccal root. Descriptive tooth movement slowed and root resorption increased slightly. However, neither the radiological changes during tooth movement (µCT T1 vs. µCT T5: autograft 1.85 ± 0.39 mm3 vs. 2.38 ± 0.35 mm3, p = 0.30; human xenograft 1.75 ± 0.45 mm3 vs. 2.17 ± 0.26 mm3, p = 0.54; ß-TCP/HA: 1.52 ± 0.42 mm3 vs. 1.88 ± 0.41 mm3, p = 0.60) nor the histological differences after tooth movement (human xenograft: 0.078 ± 0.05 mm2; ß-TCP/HA: 0.067 ± 0.049 mm2; autograft: 0.048 ± 0.015 mm2) were statistically significant. CONCLUSION: The autografts, human xenografts or synthetic bone substitute used for cleft repair seem to have a similar effect on the subsequent orthodontic tooth movement and the associated root resorptions. CLINICAL RELEVANCE: Development of root resorptions seems to have a secondary role in choosing a suitable grafting material for cleft repair.

Orthodontically Relevant Manifestations in People with Rare Diseases.

BACKGROUND: Approximately 15% of all rare diseases occur with orofacial manifestations. Symptoms and manifestations of relevance to orthodontists represent a considerable proportion of these diseases and require appropriate strategies for their treatment. This article provides an overview of the orthodontically relevant manifestations of rare diseases. MATERIAL AND METHODS: Overall, 3,639 rare diseases listed at the Orphanet, OMIM or Pubmed database were evaluated for orofacial manifestations. All rare diseases which were indicated with at least one orofacial manifestation were recorded in a database for rare diseases with orofacial manifestations called "ROMSE," which was developed by the authors. All the rare diseases were analysed with regard to orthodontically relevant orofacial manifestations, such as dysgnathia, changes in the number of teeth, failures of eruption, pathologies of bone metabolism or orofacial clefts. For all rare diseases with orthodontic relevance, an exact analysis was undertaken. RESULTS: The orthodontically relevant orofacial manifestation termed dysgnathia is described in 151 of 535 identified rare diseases (28.2%). In these 151 rare diseases, 15 different subforms of dysgnathia, in the sense of skeletal misdevelopments of the jaws but without dental abnormalities, were described. Also changes in the number of teeth (17.9%), orofacial clefts (27.6%), failures of eruption (8.4%) and pathologies of the bone (2.1%) were described. CONCLUSIONS: Orthodontics play an important role in the diagnosis and treatment of orofacial manifestations in rare diseases. Databases such as ROMSE are a first step toward providing valid information in publicly accessible databases.

Orthodontic findings and treatment need in patients with amelogenesis imperfecta: a descriptive analysis.

INTRODUCTION: Amelogenesis imperfecta (AI) is a genetically determined, non-syndromic enamel dysplasia that may manifest as hypoplasia, hypomaturation, or hypocalcification and can commonly be classified into four primary groups. In this retrospective analysis, specific orofacial characteristics are described and associated with each of the AI types based on a patient cohort from Witten/Herdecke University, Germany. METHODS: Data from 19 patients (ten male and nine female, mean age 12.27 ± 4.06 years) with AI who presented at the Department of Orthodontics between July 2011 and December 2023 were analyzed. Baseline skeletal and dental conditions were assessed, including the presence of hypodontia, displacements, and taurodontism. AI was classified into classes I-IV based on phenotype. Treatment needs were evaluated according to the main findings following the German KIG classification, while the radiological enamel situation was determined using panoramic radiographs. RESULTS: An approximately equal distribution between classes II and III was found and a slight inclination toward a dolichofacial configuration (ΔML-NSL: 5.07 ± 9.23°, ΔML-NL: 4.24 ± 8.04°). Regarding orthodontic findings, disturbance in tooth eruption as well as open bite were the most prevalent issues (both 36.8%, n = 7). The most common AI classes were type I and II, which show an almost even distribution about the skeletal classes in sagittal dimension, while dolichofacial configuration was found most frequently in vertical dimension. CONCLUSION: Both clinical and radiological orthodontic findings in context with AI are subject to extensive distribution. It seems that no specific orofacial findings can be confirmed in association with AI with regard to the common simple classes I-IV. It may be more appropriate to differentiate the many subtypes according to their genetic aspects to identify possible associated orthodontic findings.

Significance of bone morphology and quality on the primary stability of orthodontic mini-implants: in vitro comparison between human bone substitute and artificial bone.

AIM: This study evaluated artificial bone models against a human bone substitute to assess the primary stability of orthodontic mini-implants (OMIs) at varying implant sites with different morphologies and qualities. MATERIALS AND METHODS: A total of 1200 OMI placements of four types were inserted into four artificial bone models of different density (D1, D2, D3, D4) and into a human bone substitute (HB). The implants varied in diameter (2.0 and 2.3 mm) and length (9 and 11 mm). Each specimen had four implant sites: no defect, one-wall defect, three-wall defect, and circular defect. The implant stability quotient (ISQ) values were measured using resonance frequency analysis (RFA) and insertion placement torque values (IPT) were assessed for primary stability. Correlation analysis was performed to evaluate the different models. RESULTS: The highest IPT value was registered for the 2.0 mmâ€¯× 11 mm implant inserted into D1 with no defect (37.53 ± 3.02 Ncm). The lowest ISQ value was measured for the 2.3 mmâ€¯× 9 mm OMI inserted into D3 with a circular defect (12.33 ± 5.88) and the highest for the 2.3 mmâ€¯× 9 mm implant inserted into HB with no defect (63.23 ± 2.57). A strong correlation (r = 0.64) for IPT values and a very strong correlation (r = 0.8) for ISQ values was found between D2 and HB. CONCLUSION: Bone defects and bone quality affected the primary stability of implants in terms of ISQ and IPT values. Results for bone model D2 correlated very well with the HB substitution material.

Orofacial findings and orthodontic treatment conditions in patients with down syndrome - a retrospective investigation.

INTRODUCTION: The most common chromosomal anomaly is Down syndrome/Trisomy 21, which can be associated with varying degrees of intellectual disability and physical malformation. Specific orofacial characteristics regarding orthodontic treatment options and features are described on the basis of a patient collective from the Witten/Herdecke University, Germany. METHODS: Data of 20 patients (14 boys and 6 girls, mean age: 11.69 ± 3.94 years) who underwent orthodontic treatment between July 2011 and May 2022 were analyzed. Baseline skeletal and dental conditions were assessed, as well as the presence of hypodontia, displacements, and treatment-related root resorptions. The treatment need was evaluated based on the main findings according to the German KIG classification. In addition, treatment success was determined in relation to patient compliance. RESULTS: The patient group was characterized predominantly by a class III relationship (ΔANB: -2.07 ± 3.90°; ΔWITS: -3.91 ± 4.33 mm) and a brachyfacial cranial configuration (ΔML-NL: -4.38 ± 7.05°, ΔArGoMe: - 8.45 ± 10.06°). The transversal discrepancy of the dental arch width from maxilla to mandible was -0.91 ± 3.44 mm anteriorly and -4.4 ± 4.12 mm posteriorly. Considering the orthodontic indication groups, the most frequent initial finding and treatment indication represented hypodontia (85%), followed by frontal (75%) and unilateral lateral (35%) crossbite. In 55% of the cases, the teeth had a regular shape, but in 35% a generalized and in 15% an isolated hypoplasia. Only 25% of the patients could be treated with a fixed multiband appliance due to sufficient cooperation. In each of these patients, varying degrees of root resorptions were detected during treatment, and 45% of all treatments had to be terminated prematurely due to a lack of cooperation by patients or parents. CONCLUSION: The extent of dental and skeletal malformations and the high rate of findings requiring treatment in patients with Down syndrome represent a significant indication for orthodontic therapy, which can be well illustrated by the KIG classification. However, this is in contrast to the eventually increased risk of root resorption, with significantly reduced patient cooperation. A compromised treatment outcome and process must be expected. Consequently, the orthodontic treatment must be simple and realistic to achieve fast and therapeutically satisfactory treatment result.

Spine deviations and orthodontic treatment of asymmetric malocclusions in children.

BACKGROUND: The aim of this randomized clinical trial was to assess the effect of early orthodontic treatment for unilateral posterior cross bite in the late deciduous and early mixed dentition using orthopedic parameters. METHODS: Early orthodontic treatment was performed by initial maxillary expansion and subsequent activator therapy (Münster treatment concept). The patient sample was initially comprised of 80 patients with unilateral posterior cross bite (mean age 7.3 years, SD 2.1 years). After randomization, 77 children attended the initial examination appointment (therapy = 37, control = 40); 31 children in the therapy group and 35 children in the control group were monitored at the follow-up examination (T2). The mean interval between T1 and T2 was 1.1 years (SD 0.2 years). Rasterstereography was used for back shape analysis at T1 and T2. Using the profile, the kyphotic and lordotic angle, the surface rotation, the lateral deviation, pelvic tilt and pelvic torsion, statistical differences at T1 and T2 between the therapy and control groups were calculated (t-test).Our working hypothesis was, that early orthodontic treatment can induce negative therapeutic changes in body posture through thoracic and lumbar position changes in preadolescents with uniltaral cross bite. RESULTS: No clinically relevant differences between the control and the therapy groups at T1 and T2 were found for the parameters of kyphotic and lordotic angle, the surface rotation, lateral deviation, pelvic tilt, and pelvic torsion. CONCLUSIONS: Our working hypothesis was tested to be not correct (within the limitations of this study). This randomized clinical trial demonstrates that in a juvenile population with unilateral posterior cross bite the selected early orthodontic treatment protocol does not affect negatively the postural parameters. TRIAL REGISTRATION: DRKS00003497 on DRKS.

Orthodontic treatment of an adolescent with cerebral palsy - A case report.

Cerebral palsy is a common cause of chronic motor neuron impairment. A constant prevalence of 2 to 3/1000 births in industrialized countries has been described. This case report describes the treatment of a 9 year old boy presenting this form of motor neuron impairment and class II malocclusion with an overjet of 14 mm, hyperdivergent growth pattern and various habits. Orthodontic treatment consisted mainly of a two-phase treatment. The first phase was treated with removable appliances and followed by a phase with fixed appliances. Treatment duration with removable appliances was 4 years and 5 months and for the fixed appliance phase, 1 year and 7 months. A class I occlusion could be achieved in this case by removable and fixed orthodontic appliances combined with adjunctive treatment for the hypotonic orofacial musculature.

Correlations between radiological and histological findings of bone remodelling and root resorption in a rodent cleft model.

BACKGROUND: The evaluation of bone remodelling and dental root resorption can be performed by histological techniques or micro-computed tomography (micro-CT). The present study aimed to evaluate the relationship between these two procedures in the context of cleft repair in a rat model. METHODS: The reconstructed maxillae and the orthodontically-moved first molar of 12 rats were analysed for correlations between the histological and radiological findings retrospectively. The alveolar cleft repairs were performed using bone autografts or (human) xenografts. Four weeks after the operation, the intervention of the first molar protraction was initiated and lasted for eight weeks. The newly formed bone and the root resorption lacunae were determined via histology. In the micro-CT analysis, the average change of bone mineral density (BMD), bone volume fraction (BV/TV), trabecular thickness and trabecular separation of the jaw, as well as the volume of the root resorptions were determined. The Pearson correlation coefficient was applied to study the associations between groups. RESULTS: Positive correlations were found only between the newly formed bone (histology) and BMD changes (micro-CT) in the autograft group (r = 0.812, 95% CI: 0.001 to 0.979, p = 0.05). The relationship of newly formed bone and BV/TV was similar but not statistically significant (r = 0.691, 95% CI: -0.274 to 0.963, p = 0.013). Regarding root resorption, no significant correlations were found. CONCLUSIONS: Due to the lack of correlation between histological and radiological findings of bone remodelling and the development of root resorptions, both methods should be combined in this cleft model in rats for a comprehensive analysis.

Comparative in vitro study of the cleaning efficacy of AirFloss ultra and I-Prox Sulcus brushes in an orthodontic phantom model.

Preventing biofilm-related risks such as gingivitis and white spot lesions during orthodontic treatments is very challenging. The cleaning efficiencies of AirFloss Ultra and I-Prox P sulcus brushes were evaluated using an orthodontic phantom model. After attaching brackets onto black-coated maxillary KaVo teeth, a plaque substitute was applied. The evaluated tooth surfaces were divided into two areas. Cleaning was performed with an AirFloss Ultra with two (A-2) or four (A-4) sprays or an I-Prox P for two (I-2) or four (I-4) seconds. Images before and after cleaning were digitally subtracted, and the percentage of fully cleaned surfaces was determined (Adobe Photoshop CS5, ImageJ). Statistical analysis was performed by ANOVA and post hoc tests with Bonferroni correction (SPSS 25, p < 0.05). The mean values of total cleaning efficacy were 26.87% for I-2, 43.73% for I-4, 34.93%, for A-2 and 56.78% for A-4. The efficacy was significantly higher for A-4 than for A-2, I-4, and I-2. There were significant differences between the four groups. Repeated cleaning led to an improved result. Within the study limitations, the AirFloss Ultra with four sprays proved to be more efficient than the sulcus brush I-Prox P for cleaning.

Fluoride release from two types of fluoride-containing orthodontic adhesives: Conventional versus resin-modified glass ionomer cements-An in vitro study.

INTRODUCTION: Development of white spot lesions (WSLs) during orthodontic treatment is a common risk factor. Fixation of the orthodontic appliances with glass ionomer cements could reduce the prevalence of WSL's due to their fluoride release capacities. The purpose of this study was to evaluate differences of fluoride release properties from resin-modified and conventional glass ionomer cements (GICs). METHODS: The resin-modified GICs Fuji ORTHO LC (GC Orthodontics), Meron Plus QM (VOCO), as well as the conventional GICs Fuji ORTHO (GC Orthodontics), Meron (VOCO) and Ketac Cem Easymix (3M ESPE) were tested in this study. The different types of GICs were applied to hydroxyapatite discs according to the manufacturer's instructions and stored in a solution of TISAB III (Total Ionic Strength Adjustment Buffer III) and fluoride-free water at 37°C. Fluoride measurements were made after 5 minutes, 2 hours, 24 hours, 14 days, 28 days, 2 months, 3 months and 6 months. One factor analysis of variance (ANOVA) was used for the overall comparison of the cumulative fluoride release (from measurement times of 5 minutes to 6 months) between the different materials with the overall level of significance set to 0.05. Tukey's post hoc test was used for post hoc pairwise comparisons in the cumulative fluoride release between the different materials. RESULTS: The cumulative fluoride release (mean ± sd) in descending order was: Fuji ORTHO LC (221.7 ± 10.29 ppm), Fuji ORTHO (191.5 ± 15.03 ppm), Meron Plus QM (173.0 ± 5.89 ppm), Meron (161.3 ± 7.84 ppm) and Ketac Cem Easymix (154.6 ± 6.09 ppm) within 6 months. Analysis of variance detected a significant difference in the cumulative fluoride release between at least two of the materials (rounded p-value < 0.001). Pairwise analysis with Tukey's post hoc test showed a significant difference in the cumulative fluoride release for all the comparisons except M and MPQM (p = 0.061) and KCE and M (p = 0.517). CONCLUSION: Fluoride ions were released cumulatively over the entire test period for all products. When comparing the two products from the same company (Fuji ORTHO LC vs. Fuji ORTHO from GC Orthodontics Europe GmbH and Meron Plus QM vs. Meron from VOCO GmbH, Mannheim, Germany), it can be said that the resin-modified GICs have a higher release than conventional GICs. The highest individual fluoride release of all GICs was at 24 hours. A general statement, whether resin-modified or conventional GICs have a higher release of fluoride cannot be made.

Evaluation of different grafting materials for alveolar cleft repair in the context of orthodontic tooth movement in rats.

To minimize the postoperative risks posed by grafting autologous transplants for cleft repair, efforts are being made to improve grafting materials for use as potential alternatives. The aim of this study was to compare the bone graft quality of different bone substitutes including the gold standard autografts during the healing processes after cleft repair in the context of orthodontic treatment. In 21 Wistar rats, a complete, continuity-interrupting cleft was created. After 4 weeks, cleft repair was performed using autografts from the hips' ischial tuberosity, human xenografts, or synthetic bone substitutes [beta-tricalcium phosphate (ß-TCP)/hydroxyapatite (HA)]. After another 4 weeks, the first molar movement was initiated in the reconstructed jaw for 8 weeks. The bone remodeling was analyzed in vivo using micro-computed tomography (bone mineral density and bone volume fraction) and histology (new bone formation). All the grafting materials were statistically different in bone morphology, which changed during the treatment period. The ß-TCP/HA substitute demonstrated less resorption compared to the autologous and xenogeneic/human bone, and the autografts led to a stronger reaction in the surrounding bone. Histologically, the highest level of new bone formation was found in the human xenografts, and the lowest was found in the ß-TCP/HA substitute. The differences between the two bone groups and the synthetic materials were statistically significant. Autografts were confirmed to be the gold standard in cleft repair with regard to graft integration. However, parts of the human xenograft seemed comparable to the autografts. Thus, this substitute could perhaps be used as an alternative after additional tissue-engineered modification.

Effects of different surgical techniques and displacement distances on the soft tissue profile via orthodontic-orthognathic treatment of class II and class III malocclusions.

BACKGROUND: Orthognathic surgery can be carried out using isolated mandibular or maxillary movement and bimaxillary procedures. In cases of moderate skeletal malocclusion, camouflage treatment by premolar extraction is another treatment option. All these surgical procedures can have a different impact on the soft tissue profile. METHODS: The changes in the soft tissue profile of 187 patients (Class II: 53, Class III: 134) were investigated. The treatment approaches were differentiated as follows: Class II: mandible advancement (MnA), bimaxillary surgery (MxS/MnA), upper extraction (UpEX), or Class III: maxillary advancement (MxA), mandible setback (MnS), bimaxillary surgery (MxA/MnS), and lower extraction (LowEX) as well as the extent of skeletal deviation (moderate Wits appraisal: - 7 mm to 7 mm, pronounced: Wits <- 7 mm, > 7 mm, respectively). This resulted in five groups for Class II treatment and seven groups for Class III treatment. RESULTS: In the Class II patients, a statistically significant difference (p ≤ 0.05) between UpEX and moderate MnA was found for facial profile (N'-Prn-Pog'), soft tissue profile (N'-Sn-Pog'), and mentolabial angle (Pog'-B'-Li). In the Class III patients, a statistically significant differences (p ≤ 0.05) occurred between LowEX and moderate MxA for facial profile (N'-Prn-Pog'), soft tissue profile (N'-Sn-Pog'), upper and lower lip distacne to esthetic line (Ls/Li-E-line), and lower lip length (Sto-Gn'). Only isolated significant differences (p < 0.05) were recognized between the moderate surgical Class II and III treatments as well between the pronounced Class III surgeries. No statistical differences were noticed between moderate and pronounced orthognathic surgery. CONCLUSIONS: When surgery is required, the influence of orthognathic surgical techniques on the profile seems to be less significant. However, it must be carefully considered if orthognathic or camouflage treatment should be done in moderate malocclusions as a moderate mandibular advancement in Class II therapy will straighten the soft tissue profile much more by increasing the facial and soft tissue profile angle and reducing the mentolabial angle than camouflage treatment. In contrast, moderate maxillary advancement in Class III therapy led to a significantly more convex facial and soft tissue profile by decreasing distances of the lips to the E-Line as well as the lower lip length.

Establishing a new alveolar cleft model in rats to investigate the influence of jaw reconstructions on orthodontic tooth movement.

BACKGROUND: The aim of the present investigation was to develop a new cleft model in rats that allows alveolar cleft repair and subsequent tooth movement. METHODS: A complete continuity-interrupting alveolar cleft was performed on the left-side maxillae of 33 rats through ultrasonic surgery. The clefts were filled with bone wax, and microCT scans were done to analyze the cleft size. After four weeks, the cleft repair was completed using autologous, xenogeneic (human), or synthetic bone substitute. After an additional four weeks, the orthodontic tooth movement was initiated. RESULTS: Fourteen rats died during the research, and the study design was constantly adapted accordingly. The main reasons for death included breathing problems during or immediately after the experimental activities (eight animals), followed by two deaths due to circulatory failures. In the remaining 19 animals, the average cleft size was about 2.70 ± 0.46 × 2.01 ± 0.25 × 1.18 ± 0.20 mm, and the mean velocity of orthodontic tooth movement after seven days was between 0.21 ± 0.08 mm in the autologous group and 0.50 ± 0.54 mm in the xenogeneic group. After 56 days, the mean values ranged between 0.67 ± 0.27 mm in the autologous group and 0.82 ± 0.72 mm in the synthetic group. CONCLUSIONS: Surgical interventions in the oral cavity of rats requires a stronger anesthesia and lead to increased risk of coolant and coagulated blood aspiration. The new alveolar cleft model in rats allows for subsequent orthodontic tooth movement after cleft repair, but only in the mesial root of the first molar.

Sagittal back contour and craniofacial morphology in preadolescents.

The aim of this study was to analyze the correlation ratios between the sagittal back contour (flèche cervicale and lombaire, trunk inclination) and selected parameters of craniofacial morphology in children. The patient sample consisted of 66 healthy children with a mean age of 11.2 years (SD 1.6 years), of which 34 were male (mean age 11.5 years, SD 1.3 years) and 32 were females (mean age 10.9 years, SD 1.9 years). The children were recruited during the preparation of the initial orthodontic treatment records. Craniofacial morphology was analyzed by six angular measurements: facial axis, mandibular plane angle, inner gonial angle, lower facial height, facial depth and maxilla position. Rasterstereography was used for reconstruction of the spinal back sagittal profile. From the profile flèche cervicale, flèche lombaire and trunk inclination were determined and the correlations with the craniofacial morphology were calculated (Pearson and Mann-Whitney U test). Significant correlations were found with respect to the inner gonial angle and the flèche cervicale, the mandibular plane angle and the flèche lombaire, the inner gonial angle and the flèche lombaire, and the angular lower facial height and the flèche lombaire, as well as the inner gonial angle and the trunk inclination. The craniofacial vertical growth pattern, presented by mandibular plane angle, inner gonial angle and the angular lower facial height, and the correlation to flèche cervicale and lombaire as well as trunk inclination reveal correlations between growth pattern and sagittal back contour.

Ischial tuberosity: new donor site for bone grafts in animal cleft research.

In the context of cleft repair in animal research in rat models, different areas can be used for bone grafting. The aim of the present study was to present the tuberosity of the ischium as a new donor site and to evaluate its quality in relation to an artificial alveolar cleft. Four weeks after creating experimental alveolar clefts in seven Wistar rats, the repair was performed in the now twelve-week-old male animals using bone blocks grafted from the ischial tuberosity. Two days before surgery and two as well as twenty-eight days after surgery, microCT scans were performed, and the grafted bone blocks were analyzed regarding height, width, thickness, and volume. Additionally, bone mineral density (BMD) and bone volume fraction (BV/TV) were measured in the repaired cleft. The mean bone volume of the graft was about 19.77 ± 7.77mm3. Immediately after jaw reconstruction the BMD and BV/TV were about 0.54 ± 0.05 g/cm3 and 54.9 ± 5.07% for the transplant and about 1.13 ± 0.08 g/cm3 and 94.5 ± 3.70%, respectively, for the surrounding bone. Four weeks later the BMD and BV/TV were about 0.57 ± 0.13 g/cm3 and 56.60 ± 13.70% for the transplant and about 11.17 ± 0.07 g/cm3 and 97.50 ± 2.15%, respectively, for the surrounding bone. A hip fracture was found in four of the animals after surgery. The ischial tuberosity offers large bone blocks, which are sufficient for cleft repair in the rat model. However, the bone quality regarding BMD and BV/TV is less compared with the surrounding bone of the alveolar cleft, even after a period of 4 weeks, despite recognizable renovation processes.

Depth of acid penetration and enamel surface roughness associated with different methods of interproximal enamel reduction.

OBJECTIVES: To assess and compare the enamel surface quality after interproximal enamel reduction (IPR) was performed with different systems and to study the relation between acid penetration depth and enamel surface quality as well as the importance of remineralization. METHODS: Sixty-five extracted teeth were randomly allocated to five experimental groups: untreated control, manual with New Metal Strips, mechanical with oscillating segment (OS) discs, Safe-Tipped Bur Kit, and the Ortho-Strip, followed by 30 s of polishing with the Softflex system and the Compo-system after treating the tooth with OS discs. Mesial surfaces were demineralized for 24 h and distal surfaces were subjected to interchanging demineralization and remineralization cycles of 24 h each for 18 days. The analysis was carried out by profilometry, scanning electron microscopy, and polarization microscopy. RESULTS: After IPR and polishing, enamel roughness was reduced for all systems tested except for the Essix Safe-Tipped Bur Kit. Subsequent demineralization increased enamel roughness in all groups except controls beyond the original level prior to IPR except for IPR with New Metal Strips or Ortho-Strips and subsequent polishing. Cyclic demineralization and remineralization for 18 days yielded a reduction in acid penetration depth and an increase in surface smoothness, which correlated with each other only for controls and treatment with New Metal Strips or Ortho-Strips. CONCLUSIONS: Manual IPR, using New Metal Strips and, even more, the oscillating IPR system Ortho-Strips, yielded smoother interproximal enamel surfaces and less acid penetration depth than the IPR systems with OS discs and the Safe-Tipped Bur Kit after polishing and 18 days of cyclic demineralization and remineralization. Irrespective of the IPR procedure, proper remineralization of IPR-treated surfaces is advisable to reduce caries susceptibility.

Correction to: Three-dimensional quantitative assessment of palatal bone height for insertion of orthodontic implants - a retrospective CBCT study.

Following publication of the original article [1], the authors reported that the information regarding ethics approval was accidentally entered under trial registration. A trial registration was not required for this study.