RESUMO
Etching technology - one of the representative modern semiconductor device makers - serves as a broad descriptor for the process of removing material from the surfaces of various materials, whether partially or entirely. Meanwhile, thinning technology represents a novel and highly specialized approach within the realm of etching technology. It indicates the importance of achieving an exceptionally sophisticated and precise removal of material, layer-by-layer, at the nanoscale. Notably, thinning technology has gained substantial momentum, particularly in top-down strategies aimed at pushing the frontiers of nano-worlds. This rapid development in thinning technology has generated substantial interest among researchers from diverse backgrounds, including those in the fields of chemistry, physics, and engineering. Precisely and expertly controlling the layer numbers of 2D materials through the thinning procedure has been considered as a crucial step. This is because the thinning processes lead to variations in the electrical and optical characteristics. In this comprehensive review, the strategies for top-down thinning of representative 2D materials (e.g., graphene, black phosphorus, MoS2, h-BN, WS2, MoSe2, and WSe2) based on conventional plasma-assisted thinning, integrated cyclic plasma-assisted thinning, laser-assisted thinning, metal-assisted splitting, and layer-resolved splitting are covered in detail, along with their mechanisms and benefits. Additionally, this review further explores the latest advancements in terms of the potential advantages of semiconductor devices achieved by top-down 2D material thinning procedures.
RESUMO
Herein, dual-emission carbon dots (DE-CDs) were synthesized using a one-pot hydrothermal method. DE-CDs exhibited two well-separated peaks at 433 and 513 nm under ultraviolet excitation. The prepared DE-CDs offer selective detection of Fe3+ ions via inner filter effect (IFE) and Pb2+ ions via aggregation-induced enhancement (AIE). The obtained DE-CDs showed a good affinity for both Fe3+ and Pb2+ ions in the presence of various interfering ions. The limits of detection were 0.797 ppm and 4.739 ppm for Pb2+ and Fe3+, respectively. The finding reveals the huge potential of DE-CDs for the selective detection of multiple targets in one solution.
RESUMO
This study reports the fabrication of a Petri dish patterned with cylindrical micro-cavities that are produced using a one-step solvent-immersion phase-separation process. The developed 3D honeycomb Petri dish is coated with a Au film through a sputtering method to be an efficient Au-coated FTO-free electrode for quantum-dot-sensitized solar cells. Due to the high specific active surface area of the electrode with the Au-coated honeycomb structure, the energy conversion efficiency of devices that use this electrode is 5.2 % compared to 4.4 and 4.7 % by devices using an Au-coated flat Petri dish and an Au-coated FTO electrode, respectively. This design strategy offers excellent potential for the fabrication of highly efficient counter electrodes with FTO-free substrates of flexible photovoltaic devices.
RESUMO
TiO2 nanoparticles have emerged as a great photocatalyst to degrade organic contaminants in water; however, the nanoparticles dispersed in water could be difficult to be recovered and potentially become contaminant. Herbicide like 2,4-dichlorophenoxyacetic acid (2,4-D) used in agriculture usually ends up with a large fraction remaining in water and sediment, which may cause potential risk to human health and the ecosystem. This study proposes a greener method to utilize TiO2 as photocatalyst to remove 2,4-D from water. Accordingly, TiO2 nanoparticles (10-45 nm) were synthesized and grafted on lightweight fired clay to generate a TiO2-based floating photocatalyst. Experimental testing revealed that 60.2% of 2,4-D (0.1 mM) can be decomposed in 250 min under UV light with TiO2-grafted lightweight fired clay floating on water. Degradation fits well into the pseudo-first-order kinetic model. The floating photocatalysts can degrade approximately 50% 2,4-D in 250 min under sunlight and the degradation efficiency is stable for cycles. The results revealed that the fabrication of floating photocatalyst could be a promising and greener way to remove herbicide contaminants in water using TiO2.
RESUMO
Graphene has garnered increasing attention for solar energy harvesting owing to its unique features. However, limitations hinder its widespread adoption in solar energy harvesting, comprising the band gapless in the molecular orbital of graphene lattice, its vulnerability to oxidation in oxidative environments, and specific toxic properties that require careful consideration during development. Beyond current challenges, researchers have explored doping graphene with ionic liquids to raise the lifespan of solar cells (SCs). Additionally, they have paid attention to optimizing graphene/Si Schottky junction or Schottky barrier SCs by enhancing the conductivity and work function of graphene, improving silicon's reflectivity, and addressing passivation issues at the surface/interface of graphene/Si, resulting in significant advancements in their power conversion efficiency. Increasing the functional area of graphene-based SCs and designing efficient grid electrodes are also crucial for enhancing carrier collection efficiency. Flaws and contaminants present at the interface between graphene and silicon pose significant challenges. Despite the progress of graphene/Si-based photovoltaic cells still needs to catch up to the efficiency achieved by commercially available Si p-n junction SCs. The low Schottky barrier height, design-related challenges associated with transfer techniques, and high lateral resistivity of graphene contribute to this performance gap. To maximize the effectiveness and robustness of graphene/Si-based photovoltaic cells, appropriate interlayers have been utilized to tune the interface and modulate graphene's functionality. This mini-review will address ongoing research and development endeavors using van der Waals graphene heterojunctions, aiming to overcome the existing limitations and unlock graphene's full potential in solar energy harvesting and smart storage systems.
RESUMO
The rapid and efficient detection of chloride (Cl-) ions is crucial in a variety of fields, making the development of advanced sensing methods such as colorimetric sensors an imperative advancement in analytical chemistry. Herein, a novel, selective, and straightforward paper-based colorimetric sensing platform has been developed utilizing an amorphous photonic array (APA) of magnetoplasmonic Ag@Fe3O4 nanoparticles (MagPlas NPs) for the detection of Cl- in water. Taking advantage of the highly responsive APA, the key principle of this sensing method is based on the chemical reaction between Ag+ and Cl-, which results in the precipitation of high-refractive index (RI) AgCl. This assay, distinct from typical plasmonic sensors that rely heavily on nanoparticle aggregation/anti-aggregation, is premised on the precipitation reaction of Ag+ and Cl-. In the presence of Cl-, a rapid, distinctive color alteration from royal purple to a dark sky blue is visually observable within a short time of a few minutes, eliminating the necessity for any surface modification procedures. Comprehensive assessments substantiated that these sensors display commendable sensitivity, selectivity, and stability, thereby establishing their effective applicability for Cl- analysis in various technological fields.
RESUMO
In this work, novel phosphate materials based on bimetallic character (Fe and Ni) were introduced by different chemical fabrication methods, the reflux method (FeNiP-R) and the sol-gel technique (FeNiP-S), and evaluated as non-precious electrodes for methanol electrooxidation in KOH electrolytes. The designed FeNiP-R and FeNiP-S samples were investigated using different characterization techniques, namely TEM, SEM, XPS, BET, DLS, and FT-IR, to describe the impact of the fabrication technique on the chemistry, morphology, and surface area. The characterization techniques indicate the successful fabrication of nanoscale-sized particles with higher agglomeration by the sol-gel technique compared with the reflux strategy. After that, the electrochemical efficiency of the fabricated FeNiP-R and FeNiP-S as electrodes for electrocatalytic methanol oxidation was studied through cyclic voltammetry (CV) at different methanol concentrations and scan rates in addition to impedance analysis and chronoamperometric techniques. From electrochemical analyses, a sharp improvement in the obtained current values was observed in both electrodes, FeNiP-R and FeNiP-S. During the MeOH electrooxidation over FeNiP-S, the current value was improved from 0.14 mA/cm2 at 0.402 V to 2.67 mA/cm2 at 0.619 V, which is around 109 times the current density value (0.0243 mA/cm2 at 0.62 V) found in the absence of MeOH. The designed FeNiP-R electrode showed an improved electrocatalytic character compared with FeNiP-S at different methanol concentrations up to 80 mmol/L. The enhancement of the anodic current density and charge transfer resistance indicates the methanol electrooxidation over the designed bimetallic Fe/Ni-phosphates.
RESUMO
This work investigates an electrochemical impedance analysis based on synthesized TiO2 nanofibers (NFs) photoanodes, which were fabricated via electrospinning and calcination. The investigated photoanode substrate NFs were studied in terms of physicochemical tools to investigate their morphological character, crystallinity, and chemical contents via scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) analyses. As a result, the studied photoanode substrate NFs were applied to fabricate dye-sensitized solar cells (DSCs), and the electrochemical impedance analysis (EIS) was studied in terms of equivalent circuit fitting and impacts of N-doping, the latter of which was approved via XPS analysis. N-doping has a considerable role in the enhancement of charge transfers, which could be due to the strong interactions between active-site N atoms and the used photosensitizer.
RESUMO
In this work, the preparation, characterization, and evaluation of a novel nanocomposite using polyaniline (PANi) functionalized bi-metal oxide ZnO-TiO2 (ZnTiO@PANi) as shielding film for carbon steel (CS)-alloy in acidic chloride solution at 298 K was studied. Different spectroscopic characterization techniques, such as UV-visible spectroscopy, dynamic light scattering (DLS), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR) approaches, as well as other physicochemical methods, such as X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and field emission scanning electron microscope (FESEM), were used to describe the produced nanocomposites. The significance of these films lies in the ZnO-TiO2 nanoparticle's functionalization by polyaniline, a material with high conductivity and electrochemical stability in acidic solutions. The mechanistic findings of the corrosion inhibition method were obtained by the use of electrochemical methods including open-circuit potentials (OCP) vs. time, potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS). The results indicate that the synthesized ZnTiO@PANi is a powerful acidic corrosion inhibitor, and its inhibition effectiveness is 98.86% in the presence of 100 ppm. Additionally, the charge transfer resistance (Rp) value augmented from 51.8 to 432.7, and 963.7 Ω cm2 when the dose of PANi, and ZnTiO@PANi reached 100 ppm, respectively. The improvement in Rp and inhibition capacity values with an increase in nanocomposite dose is produced by the nanocomposite additives covering a larger portion of the surface, resulting in a decrease in alloy corrosion. By identifying the probable regions for molecule adsorption on the steel substrate, theoretical and computational studies provided significant details regarding the corrosion mitigation mechanism. The possibility of substituting old poisonous small substances with inexpensive and non-hazardous polymeric materials as shielding layers for utilization in the oilfield sectors is an important suggestion made by this research.
RESUMO
It is a challenge to harvest both electricity and freshwater from the oceans. This communication demonstrates that the natural-inspired hierarchical evaporator based on multi-walled carbon nanotubes can generate electricity via water evaporation for freshwater production. Furthermore, for the first time, the effect of the nature of exposed electrodes in an electrolyte solution and the distance between two electrodes on the generation of electricity is carefully investigated. We found that the natural-inspired hierarchical evaporator could generate electricity for all time of the day. The proposed natural-inspired hierarchical evaporator is scalable, feasible, and low-cost, providing great potential for direct industrial applications of solar energy on clean water and electricity generations for all time of the day. Moreover, this work also provides additional evidence unravel how electricity is generated by water flow on the surface of carbon materials.
RESUMO
This study is the first to quantify energy band alignments at a nanostructured TiO2/Au22(SG)18 cluster interface using X-ray photoelectron spectroscopy. The d-band of Au clusters shows band-like character and occupied states at the Fermi level are not detected. The results provide evidence of the existence of a finite optical energy gap in Au22(SG)18 clusters and the molecular-like nature of these clusters. The pinning position of the Fermi energy level at the interface was determined to be 2.8 and 1.3 eV higher than the top of the TiO2 valence band and the highest occupied molecular orbit level of the Au clusters, respectively. A diffuse reflectance and absorption analysis quantified a 3.2 eV bandgap of the TiO2 layer and a 2.2 eV energy gap between the highest occupied molecular orbit (HOMO) and the lowest unoccupied molecular orbit (LUMO) levels of the Au clusters. Thus, a cliff-like offset of 0.5 eV between the LUMO level and the TiO2 conduction band was determined. The cliff-like offset of 0.5 eV provides room for improving the efficiency of metal-cluster-sensitized solar cells (MCSSC) further by lowering the LUMO level through a change in the cluster size. The offset of 0.5 eV between the HOMO level and the 3I-/I-3 redox level yields a remarkable loss-in-potential, which implies the possibility of increasing the open-circuit voltage further by properly replacing the redox couple in the MCSSCs.
RESUMO
In this study, we present the fabrication of nitrile butadiene rubber/waste leather fiber (NBR/WLF) composites with different weight percentages of WLF and NBR (0/100, 20/80, 30/70, 40/60, 50/50, 60/40 wt/wt). WLF was prepared by cutting the scrap leathers from the waste product of the Vietnamese leather industry. Subsequently, in order to make the short fibers, it was mixed by a hammer mill. The characteristics of WLF/NBR composites such as mechanical properties (tensile strength, tear strength, hardness), dynamic mechanical properties, toluene absorption, and morphology were carefully evaluated. As a result, the tensile strength and tear strength become larger with increasing WLF content from 0 to 50 wt% and they decrease when further increasing WLF content. The highest tensile strength of 12.5 MPa and tear strength of 72.47 N/mm were achieved with the WLF/NBR ratio of 50/50 wt%. Both hardness and resistance of the developed materials with toluene increased with increasing WLF content. The SEM results showed a good adhesion of NBR matrix and the WLF. The increasing of storage modulus (E') in comparison with raw NBR showed good compatibility between WLF and NBR matrix. This research showed that the recycled material from waste leather and NBR was successfully prepared and has great potential for manufacturing products such as floor covering courts and playgrounds, etc.
RESUMO
The data presented in this article are related to the research article entitled "Balance between the charge transfer resistance and diffusion impedance in a CNT/Pt counter electrode for highly efficient liquid-junction photovoltaic devices" (Dao and Choi, 2018) [1]. This article presents the effect of annealing temperature and thickness of CNT/Pt film on the electrocatalytic activity of CNT/Pt counter electrode for triiodide reduction. For this purpose, we firstly fabricated CNT/Pt paste with different amount of CNT/Pt. The CNT/Pt film is then fabricated by doctor blade method.
RESUMO
Carbon-based sunlight absorbers in solar-driven steam generation have recently attracted much attention due to the possibility of huge applications of low-cost steam for medical sterilization or sanitization, seawater desalination, chemical distillation, and water purification. In this minireview, recent developments in carbon-based sunlight absorbers in solar-driven steam generation systems are reviewed, including graphene, graphite, carbon nanotubes, other carbon materials, and carbon-based composite materials, highlighting important contributions worldwide that promise low-cost, efficient, robust, reusable, chemically stable, and excellent broadband solar absorption. Furthermore, the crucial challenges associated with employing carbon materials in this field are emphasized.
RESUMO
This study presents the synthesis of PtNi alloys with different volume ratios of Pt and Ni precursors in mixture solutions using dry plasma reduction under atmospheric pressure and low temperature. The developed materials are applied as efficient counter electrodes (CEs) in dye-sensitized solar cells (DSCs). The investigation of the Pt utility in PtNi alloys for electrocatalytic activity, and cost effective and highly efficient DSCs are also investigated. Compared with the reference electrodes (Pt and Ni CEs), the developed PtNi alloy CEs exhibit better reversibility as indicated by the peak-to-peak separation and better catalytic activity for the regeneration of iodide ions from triiodide ions. Thus, the DSC with the developed PtNi CEs provides higher efficiency than that of the device fabricated with the reference electrodes.
RESUMO
We present a simple, ultrasonic vibration-assisted lift-off-based patterning approach for graphene and graphene-Ag nanowire (NW) hybrid films. A 20 µm width pattern with uniform and smooth pattern edges was neatly defined on various rigid and flexible substrates. The patterned graphene-Ag NW electrodes showed a low sheet resistance of 19 Ω/sq with a high transmittance of 93% at 550 nm, a robust stability against oxidation, and a high reliability under a bending test. The electrodes also exhibited markedly higher performance than that of commercial fluorine-doped tin oxide electrodes for dye-sensitized solar cells. Given its low-cost, high throughput, and nondamaging effect, this simple and reliable patterning approach stimulates the practical applications of graphene-based flexible transparent electrodes in soft electronic and optoelectronic devices.
RESUMO
Chemical doping is a widely-used strategy to improve the performance of TiO2 for the dye-sensitized solar cells (DSCs). However, the effect of two efficient dopants has been rarely investigated. We present the synthesis of GO@SnO2/TiO2 nanofibers (NFs) by a facile method using electrospinning and hydrothermal processes. The synthesized NFs are described in terms of morphology, crystallinity and chemistry through FESEM, TEM, HR-TEM, XRD, EDX, XPS, FT-IR and Raman spectra. As the results, the axial ratio and the average diameter of NFs decreased after the hydrothermal treatment and calcination process, respectively. The prepared Titania-based nanofibers have 81.82% anatase and 18.18% rutile-structure. The developed materials are applied as working electrodes of DSCs. The photovoltaic performances showed that the efficiency of the device employed GO@SnO2/TiO2 photoanode gave 5.41%, which was higher than those of cells fabricated with SnO2/TiO2 NFs (3.41%) and GO@TiO2 NFs (4.52%) photoanodes. The photovoltaic parameters such as Jsc, Voc, FF and Rct are calculated and found to be 11.19mAcm-2, 0.72V, 0.67 and 9.26Ω, respectively. The high photovoltaic response of DSC based of GO@SnO2/TiO2 NFs may be attributed to the large surface area of the NFs, and the low electron recombination. Furthermore, the start-stop switches of the cell devices with the developed photoanode affirmed the stability and photovoltaic performance of the cell.
RESUMO
We propose an efficient bioimaging strategy using Yb3+,Er3+,Eu3+-triplet doped YVO4 nanoparticles which were synthesized with polymer as a template. The obtained particles possess nanoscale, uniform, and flexible excitation. The effect of Eu3+ ions on the luminescence properties of YVO4:Yb3+,Er3+,Eu3+ was investigated. The upconversion mechanism of the prepared material was also discussed. The structure and optical properties of the prepared material were characterized by using X-ray diffraction (XRD), Fourier-transform IR spectroscopy (FTIR), scanning electron microscopy (SEM), Transmission electron microscopy (TEM) upconversion and photoluminescence spectra. The Commission International de I'Eclairage (CIE) chromaticity coordinates was investigated to confirm the performance of color luminescent emission. The prepared YVO4:Yb3+,Er3+,Eu3+ nanoparticles could be easily dispersed in water by surface modification with cysteine (Cys) and glutathione (GSH). The aqueous dispersion of the modified YVO4:Yb3+,Er3+,Eu3+ exhibits bright upconversion and downconversion luminescence and has been applied for bioimaging of HeLa cells. Our developed material with dual excitation offers a promising advance in bioimaging.
Assuntos
Diagnóstico por Imagem/métodos , Érbio/química , Európio/química , Itérbio/química , Ítrio/química , Células HeLa , Humanos , Difração de Raios XRESUMO
Plasmon-assisted energy conversion is investigated in a comparative study of dye-sensitized solar cells (DSCs) equipped with photo-anodes, which are fabricated by forming gold (Au) and silver (Ag) nanoparticles (NPs) on an fluorine-doped tin oxide (FTO) glass surface by means of dry plasma reduction (DPR) and coating TiO2 paste onto the modified FTO glass through a screen printing method. As a result, the FTO/Ag-NPs/TiO2 photo-anode showed an enhancement of its photocurrent, whereas the FTO/Au-NPs/TiO2 photo-anode showed less photocurrent than even a standard photo-anode fabricated by simply coating TiO2 paste onto the modified FTO glass through screen printing. This result stems from the small size and high areal number density of Au-NPs on FTO glass, which prevent the incident light from reaching the TiO2 layer.
RESUMO
This study reports on the synthesis of Pt nanourchins (PtNUs) on FTO glass surfaces and their application as an efficient and robust counter electrode (CE) in dye-sensitized solar cells (DSCs). PtNUs with sizes in the range of 100-300 nm are successfully synthesized on FTO surfaces via a simple room temperature chemical reduction of H2PtCl6 using formic acid. Note that the PtNUs have numerous Pt nanowires with 2 nm diameters and 12 nm lengths. The PtNU CE exhibits very low charge-transfer resistance for DSCs. The efficiency of DSCs fabricated with PtNU CEs is 9.39%, which is higher than that of devices assembled with Pt-sputtered CEs (8.51%).