Taming tosyl azide: the development of a scalable continuous diazo transfer process.

Heat and shock sensitive tosyl azide was generated and used on demand in a telescoped diazo transfer process. Small quantities of tosyl azide were accessed in a 'one pot' batch procedure using shelf stable, readily available reagents. For large scale diazo transfer reactions tosyl azide was generated and used in a telescoped flow process, to mitigate the risks associated with handling potentially explosive reagents on scale. The in situ formed tosyl azide was used to rapidly perform diazo transfer to a range of acceptors, including ß-ketoesters, ß-ketoamides, malonate esters and ß-ketosulfones. An effective in-line quench of sulfonyl azides was also developed, whereby a sacrificial acceptor molecule ensured complete consumption of any residual hazardous diazo transfer reagent. The telescoped diazo transfer process with in-line quenching was used to safely prepare over 21 g of an α-diazocarbonyl in >98% purity without any column chromatography.

Development of a continuous process for α-thio-ß-chloroacrylamide synthesis with enhanced control of a cascade transformation.

A continuous process strategy has been developed for the preparation of α-thio-ß-chloroacrylamides, a class of highly versatile synthetic intermediates. Flow platforms to generate the α-chloroamide and α-thioamide precursors were successfully adopted, progressing from the previously employed batch chemistry, and in both instances afford a readily scalable methodology. The implementation of the key α-thio-ß-chloroacrylamide casade as a continuous flow reaction on a multi-gram scale is described, while the tuneable nature of the cascade, facilitated by continuous processing, is highlighted by selective generation of established intermediates and byproducts.

Taming hazardous chemistry in flow: the continuous processing of diazo and diazonium compounds.

The synthetic utilities of the diazo and diazonium groups are matched only by their reputation for explosive decomposition. Continuous processing technology offers new opportunities to make and use these versatile intermediates at a range of scales with improved safety over traditional batch processes. In this minireview, the state of the art in the continuous flow processing of reactive diazo and diazonium species is discussed.

A machine-assisted flow synthesis of SR48692: a probe for the investigation of neurotensin receptor-1.

Here we report the direct comparison of a conventional batch mode synthesis of Meclinertant (SR48692, 1), a neurotensin receptor-1 antagonist, with its machine-assisted flow chemistry alternative. By using these enabling tools, combined with solid-supported reagents and scavengers, many process advantages were observed. Care, however, must be taken not to convert these techniques into expensive solutions to problems that do not exist.

The synthesis of Bcr-Abl inhibiting anticancer pharmaceutical agents imatinib, nilotinib and dasatinib.

Imatinib (1), nilotinib (2) and dasatinib (3) are Bcr-Abl tyrosine kinase inhibitors approved for the treatment of chronic myelogenous leukemia (CML). This review collates information from the journal and patent literature to provide a comprehensive reference source of the different synthetic methods used to prepare the aforementioned active pharmaceutical ingredients (API's).

Continuous flow reaction monitoring using an on-line miniature mass spectrometer.

RATIONALE: A recently developed miniature electrospray ionisation mass spectrometer has been coupled to a preparative flow chemistry system in order to monitor reactive intermediates and competing reaction paths, screen starting materials, and optimise reaction conditions. Although ideally suited to the application, mass spectrometers have rarely been used in this way, as traditional instruments are too bulky to be conveniently coupled to flow chemistry platforms. METHODS: A six-port switching valve fitted with a 5 µL loop was used to periodically sample the flow stream leaving the reactor coil. Mass spectra corresponding to the sample loop contents were observed approximately 10 s after activating the valve. High fluidic pressure was maintained throughout to ensure that gaseous products remained in solution. As an illustrative example of how this apparatus can be employed, the generation of benzyne and its subsequent reaction with furan were investigated. Benzyne was prepared via diazotisation of anthranilic acid using tert-butyl nitrite. RESULTS: Unexpectedly, the explosive diazotised intermediate was detected by the mass spectrometer at low coil temperatures or short residence times. The optimum reactor temperature and residence time for production of the desired Diels-Alder product are 50 °C and 3-5 min, respectively. There are competing reaction pathways leading to the formation of acridone and several other by-products. CONCLUSIONS: On-line mass spectrometry allowed the flow conditions to be quickly tuned for safe operation and optimal generation of the desired product. The validity of this approach was corroborated by off-line liquid chromatography/mass spectrometry (LC/MS) analysis of flow samples.

Isolation by HPLC and characterisation of the bioactive fraction of New Zealand manuka (Leptospermum scoparium) honey.

Using HPLC a fraction of New Zealand manuka honey has been isolated, which gives rise to the non-peroxide antibacterial activity. This fraction proved to be methylglyoxal, a highly reactive precursor in the formation of advanced glycation endproducts (AGEs). Methylglyoxal concentrations in 49 manuka and 34 non-manuka honey samples were determined using a direct detection method and compared with values obtained using standard o-phenylenediamine derivatisation. Concentrations obtained using both the methods were similar and varied from 38 to 828 mg/kg.

The impact of storage conditions upon gentamicin coated antimicrobial implants.

A systematic approach was developed to investigate the stability of gentamicin sulfate (GS) and GS/poly (lactic-co-glycolic acid) (PLGA) coatings on hydroxyapatite surfaces. The influence of environmental factors (light, humidity, oxidation and heat) upon degradation of the drug in the coatings was investigated using liquid chromatography with evaporative light scattering detection and mass spectrometry. GS coated rods were found to be stable across the range of environments assessed, with only an oxidizing atmosphere resulting in significant changes to the gentamicin composition. In contrast, rods coated with GS/PLGA were more sensitive to storage conditions with compositional changes being detected after storage at 60 °C, 75% relative humidity or exposure to light. The effect of γ-irradiation on the coated rods was also investigated and found to have no significant effect. Finally, liquid chromatography-mass spectrometry analysis revealed that known gentamines C1, C1a and C2 were the major degradants formed. Forced degradation of gentamicin coatings did not produce any unexpected degradants or impurities.

Analysis of the flavonoid component of bioactive New Zealand manuka (Leptospermum scoparium) honey and the isolation, characterisation and synthesis of an unusual pyrrole.

The flavonoid components of New Zealand manuka (Leptospermum scoparium) honey have been quantified in a series of 31 honeys of varying non-peroxide antibacterial activity to clarify discrepancies between previous studies reported in the literature. Total flavonoid content was 1.16 mg/100 g honey. The principal flavonoids present were pinobanksin, pinocembrin, luteolin and chrysin and together these represented 61% of the total flavonoid content. 1, 2-formyl-5-(2-methoxyphenyl)-pyrrole, which was weakly correlated with the non-peroxide antibacterial activity, was isolated from the flavonoid fraction and separately synthesised. 1 did not display inhibitory activity against Staphylococcus aureus in vitro and thus the origin of the correlation, which is still unknown, is not a direct contribution.