Solid-State Structures and Properties of Lignin Hydrogenolysis Oil Compounds: Shedding a Unique Light on Lignin Valorization.

This article explores the important, and yet often overlooked, solid-state structures of selected bioaromatic compounds commonly found in lignin hydrogenolysis oil, a renewable bio-oil that holds great promise to substitute fossil-based aromatic molecules in a wide range of chemical and material industrial applications. At first, single-crystal X-ray diffraction (SCXRD) was applied to the lignin model compounds, dihydroconiferyl alcohol, propyl guaiacol, and eugenol dimers, in order to elucidate the fundamental molecular interactions present in such small lignin-derived polyols. Then, considering the potential use of these lignin-derived molecules as building blocks for polymer applications, structural analysis was also performed for two chemically modified model compounds, i.e., the methylene-bridging propyl-guaiacol dimer and propyl guaiacol and eugenol glycidyl ethers, which can be used as precursors in phenolic and epoxy resins, respectively, thus providing additional information on how the molecular packing is altered following chemical modifications. In addition to the expected H-bonding interactions, other interactions such as π-π stacking and C-H∙∙∙π were observed. This resulted in unexpected trends in the tendencies towards the crystallization of lignin compounds. This was further explored with the aid of DSC analysis and CLP intermolecular energy calculations, where the relationship between the major interactions observed in all the SCXRD solid-state structures and their physico-chemical properties were evaluated alongside other non-crystallizable lignin model compounds. Beyond lignin model compounds, our findings could also provide important insights into the solid-state structure and the molecular organization of more complex lignin fragments, paving the way to the more efficient design of lignin-based materials with improved properties for industrial applications or improving downstream processing of lignin oils in biorefining processes, such as in enhancing the separation and isolation of specific bioaromatic compounds).

Stabilization of Hybrid Adhesives and Sealants by Thermodynamic Tuning of Molecularly Optimized Lignin Bio-Additives: Small Changes, Big Effects.

The use of lignin as a functional additive has long been a promising topic in both industry and academia, but the development of such systems is still limited by the considerable challenges posed by the incompatibility of lignin with common polymers. Herein, we designed modified silicone (MS) sealants with enhanced UV and thermal stability by incorporating molecularly engineered lignin bio-additives while establishing robust design principles to finely adjust the morphology of such blends by tailoring the molecular structures of lignin fractions. To that end, we first constructed a library of lignin fractions with various molecular weights (obtained by fractionating Kraft lignin and by using a lignin model compound) and with several chemical modifications (acetylation, butyrylation, and silylation). The lignin bio-additives were then melt-blended with MS polyethers. The experimental phase diagrams of the resulting blends were established and rationalized with a thermodynamic framework combining Hansen solubility parameters and Flory-Huggins theory, unraveling fascinating insights into the complex solubility behavior of lignin fractions and notably, for the first time, the subtle interplay between molecular weight (entropic effects) and chemical modifications (enthalpic effects). A molecularly optimized lignin additive was then selected to achieve full solubility while providing better thermal stability and UV-blocking properties to the resulting MS material. Overall, this article provides robust design principles for the elaboration of functional biomaterials with optimized morphologies based on rationally engineered lignin fractions.

Aldehyde-Assisted Lignocellulose Fractionation Provides Unique Lignin Oligomers for the Design of Tunable Polyurethane Bioresins.

Thanks to chemical stabilization, aldehyde-assisted fractionation (AAF) of lignocellulosic biomass has recently emerged as a powerful tool for the production of largely uncondensed lignin. Depolymerization of AAF lignin via ether cleavage provides aromatic monomers at near theoretical yields based on ether cleavage and an oligomeric fraction that remains largely unexploited despite its unique material properties. Here, we present an in-depth analytical characterization of AAF oligomers derived from hardwood and softwood in order to elucidate their molecular structures. These bioaromatic oligomers surpass technical Kraft lignin in terms of purity, solubility, and functionality and thus cannot even be compared to this common feedstock directly for material production. Instead, we performed comparative experiments with Kraft oligomers of similar molecular weight (Mn ∼ 1000) obtained through solvent extraction. These oligomers were then formulated into polyurethane materials. Substantial differences in material properties were observed depending on the amount of lignin, the botanical origin, and the biorefining process (AAF vs Kraft), suggesting new design principles for lignin-derived biopolymers with tailored properties. These results highlight the surprising versatility of AAF oligomers towards the design of new biomaterials and further demonstrate that AAF can enable the conversion of all biomass fractions into value-added products.

Fully Biobased Epoxy Resins from Fatty Acids and Lignin.

The use of renewable resources for plastic production is an imperious need for the reduction of the carbon footprint and the transition towards a circular economy. With that goal in mind, fully biobased epoxy resins have been designed and prepared by combining epoxidized linseed oil, lignin, and a biobased diamine derived from fatty acid dimers. The aromatic structures in lignin provide hardness and strength to an otherwise flexible and breakable epoxy resin. The curing of the system was investigated by infrared spectroscopy and differential scanning calorimetry (DSC). The influence of the different components on the thermo-mechanical properties of the epoxy resins was analyzed by DSC, thermal gravimetric analysis (TGA), and tensile tests. As the content of lignin in the resin increases, so does the glass transition, the Young's modulus, and the onset of thermal degradation. This correlation is non-linear, and the higher the percentage of lignin, the more pronounced the effect. All the components of the epoxy resin being commodity chemicals, the present system provides a realistic opportunity for the preparation of fully biorenewable resins at an industrial scale.

Novel L-DOPA-derived poly(ester amide)s: monomers, polymers, and the first L-DOPA-functionalized biobased adhesive tape.

The synthesis, characterization, and testing of a range of novel bio-inspired L-DOPA-derived poly(ester amide)s is presented, using a widely applicable, straightforward chemistry. A model system is used to study and establish the monomer and polymer synthetic protocols, and to provide a set of optimum reaction conditions. It is further shown that fully biobased L-DOPA-containing adhesive tapes can be fabricated, which are positively evaluated in terms of their adhesive properties. The newly developed synthetic protocol constitutes a versatile platform for accessing and tailoring a plethora of relevant structures, including a variety of potentially biocompatible poly(ethylene glycol)-based materials.

Interplay between viscoelastic and chemical tunings in fatty-acid-based polyester adhesives: engineering biomass toward functionalized step-growth polymers and soft networks.

This Article describes the synthesis and characterization of renewable self-adhesive coatings with tunable viscoelastic properties and equipped with well-defined amounts of carboxylic acid "sticker" groups with adhesion promoting characteristics. Hydroxyl-ended polyesters with various architectures (linear, branched) were synthesized by melt polycondensation of dimerized fatty acids and fatty diols and then cured with maleic anhydride-modified triglycerides (such as maleinized soybean oil) in the presence of the amidine catalyst 1,8-diazabicyclo[5.4.0]undec-7-ene. The curing reaction of alcoholysis has the dual effect of chain extending/cross-linking the base polymers via creation of polymeric half-esters linkages while introducing carboxylic acid functions within the gel structure. We demonstrated how the adhesion properties can be finely tuned from molecular design and formulation of the network precursors and how the rheology and functionality of the coatings influence the adhesive bond formation and development. These renewable polyester adhesives proved to be suitable materials for pressure-sensitive adhesives applications with respect to adhesion strength, viscoelasticity, and functionality. In addition, the environmental benefits of such materials are briefly discussed.

Thermosetting Polymers from Lignin Model Compounds and Depolymerized Lignins.

Lignin is the most abundant source of renewable ready-made aromatic chemicals for making sustainable polymers. However, the structural heterogeneity, high polydispersity, limited chemical functionality and solubility of most technical lignins makes them challenging to use in developing new bio-based polymers. Recently, greater focus has been given to developing polymers from low molecular weight lignin-based building blocks such as lignin monomers or lignin-derived bio-oils that can be obtained by chemical depolymerization of lignins. Lignin monomers or bio-oils have additional hydroxyl functionality, are more homogeneous and can lead to higher levels of lignin substitution for non-renewables in polymer formulations. These potential polymer feed stocks, however, present their own challenges in terms of production (i.e., yields and separation), pre-polymerization reactions and processability. This review provides an overview of recent developments on polymeric materials produced from lignin-based model compounds and depolymerized lignin bio-oils with a focus on thermosetting materials. Particular emphasis is given to epoxy resins, polyurethanes and phenol-formaldehyde resins as this is where the research shows the greatest overlap between the model compounds and bio-oils. The common goal of the research is the development of new economically viable strategies for using lignin as a replacement for petroleum-derived chemicals in aromatic-based polymers.