Structure-Property Relationships for Potential Inversion From Electron Acceptors Based on Thiophene-Fused Triptycene Quinones, 1,4-Diketones and Their Malononitrile Adducts.

The synthesis and properties of a series of 11,11,12,12-tetracyano-9,10-anthraquinodimethane (TCAQ) inspired electron acceptors based on thiophene-fused quinone and triptycene motifs is presented. This has yielded insights into structure-property relationships for establishing and modulating simultaneous two-electron reduction processes in TCAQ analogues. These new compounds were synthesised using a Friedel-Crafts acylation between triptycene and thiophene-3,4-dicarbonyl chloride. Isomeric para-quinones featuring a [c]-fused thiophene on one side and a ß,ß- or α,ß-fused triptycene on the other were isolated alongside a thiophene-3,4-diketone which bears two triptycene fragments. Knoevenagel condensation of these products with malononitrile produced a quinoidal bis(dicyanomethylene), an oxo-dicyanomethylene and an acyclic bis(dicyanomethylene). This series of new electron accepting molecules has been studied using X-ray crystallography and the implications of their 3D structures on NMR and UV/vis absorbance spectroscopy and cyclic voltammetry results have been ascertained with conclusions underpinned by computational methods.

Transition-Metal-Free Continuous-Flow Synthesis of 2,5-Diaryl Furans: Access to Medicinal Building Blocks and Optoelectronic Materials.

The direct transformation of 1,3-dienes into valuable 2,5-diarylfurans using transition-metal-free conditions is presented. By employing a simple oxidation─dehydration sequence on readily accessible 1,3-dienes, important 2,5-diarylfuran building blocks frequently used in medicinal and material chemistry are prepared. The oxidation step is realized using singlet oxygen, and the intermediate endoperoxide is dehydrated under metal-free conditions and at ambient temperature using the Appel reagent. Notably, this sequence can be streamlined into continuous flow, thereby eliminating the isolation of the intermediate, often unstable endoperoxide. This leads to a significant improvement in isolated yields (ca. 27% average increase) of the 2,5-diarylfurans while also increasing safety and reducing waste. Our transition-metal-free synthetic approach to 2,5-diarylfurans delivers several important furan building blocks used commonly in medicinal chemistry and as optoelectronic materials, including short-chain linearly conjugated furan oligomers. Consequently, we also complete a short study of the optical and electrochemical properties of a selection of these novel materials.

Novel 4-[4-(4-methylpiperazin-1-yl)phenyl]-6-arylpyrimidine derivatives and their antitrypanosomal activities against T.brucei.

Human African trypanosomiasis, or sleeping sickness, is a neglected tropical disease caused by Trypanosoma brucei rhodesiense and Trypanosoma brucei gambiense and is invariably fatal unless treated. Current therapies present limitations in their application, parasite resistance, or require further clinical investigation for wider use. Our work, informed by previous findings, presents novel 4-[4-(4-methylpiperazin-1-yl)phenyl]-6-arylpyrimidine derivatives with promising antitrypanosomal activity. In particular, 32 exhibits an in vitro EC50 value of 0.5 µM against Trypanosoma brucei rhodesiense, and analogues 29, 30 and 33 show antitrypanosomal activities in the <1 µM range. We have demonstrated that substituted 4-[4-(4-methylpiperazin-1-yl)phenyl]-6-arylpyrimidines present promising antitrypanosomal hit molecules with potential for further preclinical development.

A simple and Sequential Strategy for the Introduction of Complexity and Hierarchy in Hydrogen-bonded Organic Framework (HOF) Crystals for Environmental Applications.

Hydrogen-bonded organic frameworks (HOFs) are a new class of crystalline porous organic molecular materials (POMMs) with great potential for a diverse range of applications. HOFs face common challenges to POMMs, and in general to purely organic crystals, that is, the difficulty of integrating complexity in crystals. Herein, we proposed a simple and sequential strategy for the formation of HOFs with hierarchical superstructures. The strategy is based on controlling the assembly conditions, avoiding the use of any surface functionalization or template, which allows to obtain hierarchical crystalline porous superstructures in an easy manner. As proof of concept, we obtained the first example of core-shell (HOF-on-HOF) crystals and HOFs with hierarchical superstructures having superhydrophobicity and trapping abilities for the capture of persistent water contaminants such as oils and microplastics. We expect that this strategy could serve as inspiration for the construction of more intricated multiscale structures that could greatly expand the library of HOFs materials.

A Family of Bisnaphthyl C2-Symmetric and Asymmetric Clefts: Synthesis, Solid-State Structure, and Calculation of the Interplanar Angle.

The synthesis of a new family of naphthalenoid C2-symmetric clefts has been realized through a four-step synthetic sequence giving three C2-symmetric clefts and a rare nonsymmetric example. Subsequently, stereoselective reduction of the carbonyl groups at C-8 and C-16 then provides cleft molecules with hydrogen bonding potential. Using single-crystal X-ray and computational analysis, the cleft angle of the dione has been determined.

An investigation into the adsorption mechanism of n-butanol by ZIF-8: a combined experimental and ab initio molecular dynamics approach.

The zeolitic imidazolate framework, ZIF-8, has been shown by experimental methods to have a maximum saturation adsorption capacity of 0.36 g g-1 for n-butanol from aqueous solution, equivalent to a loading of 14 butanol molecules per unit cell or 7 molecules per sodalite ß-cage. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) shows the presence of hydrogen bonding between adsorbed butanol molecules within the cage; the presence of three different O-H stretching modes indicates the formation of butanol clusters of varying size. Ab initio molecular dynamics simulations show the formation of intermolecular hydrogen bonding between the butanol molecules, with an average hydrogen-bond coordination number of 0.9 after 15 ps simulation time. The simulations also uniquely demonstrate the presence of weaker interactions between the alcohol O-H group and the π-orbital of the imidazole ring on the internal surface of the cage during early stages of adsorption. The calculated adsorption energy per butanol molecule is -33.7 kJ mol-1, confirming that the butanol is only weakly bound, driven primarily by the hydrogen bonding. Solid-state MAS NMR spectra suggest that the adsorbed butanol molecules possess a reasonable degree of mobility in their adsorbed state, rather than being rigidly held in specific sites. 2D 13C-1H heteronuclear correlation (HETCOR) experiments show interactions between the butanol aliphatic chain and the ZIF-8 framework experimentally, suggesting that O-H interactions with the π-orbital are only short lived. The insight gained from these results will allow the design of more efficient ways of recovering and isolating n-butanol, an important biofuel, from low-concentration solutions.

Organocatalytic Enantioselective Synthesis of Bicyclo[2.2.2]octenones via Oxaziridinium Catalysed ortho-Hydroxylative Phenol Dearomatization.

Hydroxylative dearomatization reactions of phenols (HPD) offer an efficient way to assemble complex, biologically relevant scaffolds. Despite this, enantioselective hydroxylative phenol dearomatizations for the construction of bicyclo[2.2.2]octenones are classically limited to stoichiometric chiral reagents, and a practical, enantioselective catalytic method has remained elusive. Herein, we describe a highly enantioselective, organocatalytic tandem o-HPD-[4+2] reaction. Our methodology utilizes a chiral oxaziridinium organocatalyst, that is available in both enantiomeric forms, to afford dearomatized products in high enantioselectivity over a range of phenol substitution patterns. This approach was applied to the highly enantioselective synthesis of (+)-biscarvacrol (99 : 1 e.r.) and (-)-bis(2,6-xylenol) (94 : 6 e.r.). The practicality of our conditions was demonstrated at gram-scale, using an amine precatalyst, accessible in a single synthetic step.

Hierarchical Assembly of a Micro- and Macroporous Hydrogen-Bonded Organic Framework with Tailored Single-Crystal Size.

Porous organic molecular materials represent an emergent field of research in Chemistry and Materials Science due to their unique combination of properties. To enhance their performance and expand the number of applications, the incorporation of hierarchical porosity is required, as exclusive microporosity entails several limitations. However, the integration of macropores in porous organic molecular materials is still an outstanding challenge. Herein, we report the first example of a hydrogen-bonded organic framework (MM-TPY) with hierarchical skeletal morphology, containing stable micro- and macroporosity. The crystal size, from micro to centimetre scale, can be controlled in a single step without using additives or templates. The mechanism of assembly during the crystal formation is compatible with a skeletal crystal growth. As proof of concept, we employed the hierarchical porosity as a platform for the dual, sequential and selective co-recognition of molecular species and microparticles.

An Air-Stable Organic Radical from a Controllable Photoinduced Domino Reaction of a Hexa-aryl Substituted Anthracene.

Air-stable organic radicals and radical ions have attracted great attention for their far-reaching application ranging from bioimaging to organic electronics. However, because of the highly reactive nature of organic radicals, the design and synthesis of air-stable organic radicals still remains a challenge. Herein, an air-stable organic radical from a controllable photoinduced domino reaction of a hexa-aryl substituted anthracene is described. The domino reaction involves a photoinduced [4 + 2] cycloaddition reaction, rearrangement, photolysis, and an elimination reaction; 1H/13C NMR spectroscopy, high resolution mass spectrometry, single-crystal X-ray diffraction, and EPR spectroscopy were exploited for characterization. Furthermore, a photoinduced domino reaction mechanism is proposed according to the experimental and theoretical studies. In addition, the effects of employing push and pull electronic groups on the controllable photoinduced domino reaction were investigated. This article not only offers a new blue emitter and novel air-stable organic radical compound for potential application in organic semiconductor applications, but also provides a perspective for understanding the fundamentals of the reaction mechanism on going from anthracene to semiquinone in such anthracene systems.

Lithiated Calix[n]arenes (n = 6 or 8): Synthesis, Structures, and Use in the Ring-Opening Polymerization of Cyclic Esters.

A variety of lithiated calix[n]arenes, for which n = 6 or 8, have been isolated, structurally characterized, and evaluated as catalysts for the ring-opening polymerization (ROP) of the cyclic esters ε-caprolactone (ε-CL), δ-valerolactone (δ-VL), and rac-lactide (r-LA). In particular, interaction of p-tert-butylcalix[6]areneH6 (L6H6) with LiOtBu in THF led to the isolation of [Li14(L6H)2(CO3)2(THF)6(OH2)6]·14THF (1·14THF), the core of which has a chain of five Li2O2 diamonds. Similar use of p-tert-butylcalix[8]areneH8 (L8H8) afforded [Li10(L8)(OH)2(THF)8]·7THF (2·7THF), where the core is composed of a six-rung Li-O ladder. Use of debutylated calix[8]areneH8 (deBuL8H8) led to an elongated dimer [Li18(deBuL8)2(OtBu)2(THF)14]·4THF (3·4THF) in which the calix[8]arenes possess a wavelike conformation forming bridges to link three separate LixOy clusters (where x and y = 6, ignoring the THF donor oxygens). Interaction of L8H8 with LiOH·H2O afforded [Li4(L8H4)(OH2)4(THF)6]·5.5THF (4·5.5THF), where intramolecular H-bond interactions involving Li, O, and H construct a cage in the core of the structure with six- and eight-membered rings. Lastly, addition of Me3Al to the solution generated from L8H8 and LiOtBu led to the isolation of [(AlMe2)2Li20(L8H2)2(OH2)4(O2-)4(OH)2(NCMe)12]·10MeCN (5·10MeCN) in which Li, O, Al, and N centers build a polyhedral core. These complexes have been screened for their potential to act as precatalysts in the ring-opening polymerization (ROP) of ε-CL, δ-VL, and r-LA. For the ROP of ε-CL, δ-VL, and r-LA, systems 1-4 exhibited moderate activity at 130 °C over 8 h. In the case of ROP using the mixed-metal (Li/Al) system 5, better conversions and high molecular weight polymers were achieved. In the case of the ROP of ω-pentadecalactone (ω-PDL), the systems proved to be inactive under the conditions employed herein.

Low-Dimensional Architectures in Isomeric cis-PtCl2{Ph2PCH2N(Ar)CH2PPh2} Complexes Using Regioselective-N(Aryl)-Group Manipulation.

The solid-state behaviour of two series of isomeric, phenol-substituted, aminomethylphosphines, as the free ligands and bound to PtII, have been extensively studied using single crystal X-ray crystallography. In the first library, isomeric diphosphines of the type Ph2PCH2N(Ar)CH2PPh2 [1a-e; Ar = C6H3(Me)(OH)] and, in the second library, amide-functionalised, isomeric ligands Ph2PCH2N{CH2C(O)NH(Ar)}CH2PPh2 [2a-e; Ar = C6H3(Me)(OH)], were synthesised by reaction of Ph2PCH2OH and the appropriate amine in CH3OH, and isolated as colourless solids or oils in good yield. The non-methyl, substituted diphosphines Ph2PCH2N{CH2C(O)NH(Ar)}CH2PPh2 [2f, Ar = 3-C6H4(OH); 2g, Ar = 4-C6H4(OH)] and Ph2PCH2N(Ar)CH2PPh2 [3, Ar = 3-C6H4(OH)] were also prepared for comparative purposes. Reactions of 1a-e, 2a-g, or 3 with PtCl2(η4-cod) afforded the corresponding square-planar complexes 4a-e, 5a-g, and 6 in good to high isolated yields. All new compounds were characterised using a range of spectroscopic (1H, 31P{1H}, FT-IR) and analytical techniques. Single crystal X-ray structures have been determined for 1a, 1b∙CH3OH, 2f∙CH3OH, 2g, 3, 4b∙(CH3)2SO, 4c∙CHCl3, 4d∙½Et2O, 4e∙½CHCl3∙½CH3OH, 5a∙½Et2O, 5b, 5c∙»H2O, 5d∙Et2O, and 6∙(CH3)2SO. The free phenolic group in 1b∙CH3OH, 2f∙CH3OH,2g, 4b∙(CH3)2SO, 5a∙½Et2O, 5c∙»H2O, and 6∙(CH3)2SO exhibits various intra- or intermolecular O-H∙∙∙X (X = O, N, P, Cl) hydrogen contacts leading to different packing arrangements.

Facile Multicomponent Polymerizations toward Unconventional Luminescent Polymers with Readily Openable Small Heterocycles.

Heterocyclic polymers have gained enormous attention for their unique functionalities and wide applications. In contrast with the well-studied polymer systems with five- or six-membered heterocycles, functional polymers with readily openable small-ring heterocycles have rarely been explored due to their large synthetic difficulty. Herein, a facile one-pot multicomponent polymerization to such polymers is developed. A series of functional polymers with multisubstituted and heteroatom-rich azetidine frameworks are efficiently generated at room temperature in high atom economy from handy monomers. The four-membered azetidine rings in the polymer skeletons can be easily transformed into amide and amidine moieties via a fast and efficient acid-mediated ring-opening reaction, producing brand-new polymeric materials with distinctive properties. All the as-prepared azetidine-containing polymers exhibit intrinsic visible luminescence in the solid state under long-wavelength UV irradiation even without conventionally conjugated structures. Such unconventional luminescence is attributed to the clusteroluminogens formed by through-space electronic interactions of heteroatoms and phenyl rings. All the obtained polymers show excellent optical transparency, high and tunable refractive indices, low optical dispersions and good photopatternability, which make them promising materials in various advanced electronic and optoelectronic devices. The ring-opened polymers can also function as a lysosome-specific fluorescent probe in biological imaging.

A Hexahomotrioxacalix[3]arene-Based Ditopic Receptor for Alkylammonium Ions Controlled by Ag⁺ Ions.

A receptor cone-1 based on a hexahomotrioxacalix[3]arene bearing three pyridyl groups was successfully synthesized, which has a C3-symmetric conformation and is capable of binding alkylammonium and metal ions simultaneously in a cooperative fashion. It can bind alkylammonium ions through the -cavity formed by three aryl rings. This behaviour is consistent with the cone-in/cone-out conformational rearrangement needed to reorganize the cavity for endo-complexation. As a C3-symmetrical pyridyl-substituted calixarene, receptor cone-1 can also bind an Ag⁺ ion, and the nitrogen atoms are turned towards the inside of the cavity and interact with Ag⁺. After complexation of tris(2-pyridylamide) derivative receptor cone-1 with Ag⁺, the original C3-symmetry was retained and higher complexation selectivity for n-BuNH3⁺ versus t-BuNH3⁺ was observed. Thus, it is believed that this receptor will have a role to play in the sensing, detection, and recognition of Ag⁺ and n-BuNH3+ ions.

Pyrene-Based Approach to Tune Emission Color from Blue to Yellow.

The development of functionalized, luminescent, pyrene-based monomers has been and continues to be an area of great interest in terms of the design and fabrication of optical and electronic devices. Herein, a facile strategy to tune the emission color of pyrene-based chromophores has been established by simple functional group modification at the para position to the diphenylamino on the donor building block. Intriguing photophysical properties were obtained and are described both in different solutions and in the solid state. The results obtained could be explained by the Hammett method and by density functional theory (DFT) calculations. A good correlation was observed between the Hammett σpara constants of the functional groups para to the phenyl and the wavenumber (cm-1) of the emission profile. This positive correlation, namely between the σ constants of the functional groups and the emission properties of the monomers, can be used to develop a predictive method for these types of systems.

Vanadium(V) Oxo and imido calix[8]arene complexes: synthesis, structural studies, and ethylene homo/copolymerisation capability.

Interaction of p-tert-butylcalix[8]areneH8 (L(8) H8 ) with [NaVO(OtBu)4 ] (formed in situ from VOCl3 ) afforded the complex [Na(NCMe)5 ][(VO)2 L(8) H]⋅4 MeCN (1⋅4 MeCN). Increasing [NaVO(OtBu)4 ] to 4 equiv led to [Na(NCMe)6 ]2 [(Na(VO)4 L(8) )(Na(NCMe))3 ]2 ⋅10 MeCN (2⋅10 MeCN). With adventitious oxygen, reaction of 4 equiv of [VO(OtBu)3 ] with L(8) H8 afforded the alkali-metal-free complex [(VO)4 L(8) (µ(3) -O)2 ] (3); solvates 3⋅3 MeCN and 3⋅3 CH2 Cl2 were isolated. For the lithium analogue, the order of addition had to be reversed such that lithium tert-butoxide was added to L(8) H8 and then treated with 2 equiv of VOCl3 ; crystallisation afforded [(VO2 )2 Li6 [L(8) ](thf)2 (OtBu)2 (Et2 O)2 ]⋅Et2 O (4⋅Et2 O). Upon extraction into acetonitrile, [Li(NCMe)4 ][(VO)2 L(8) H]⋅8 MeCN (5⋅8 MeCN) was formed. Use of the imido precursors [V(NtBu)(OtBu)3 ] and [V(Np-tolyl)(OtBu)3 ] and L(8) H8 , afforded [tBuNH3 ][{V(p-tolylN)}2 L(8) H]⋅3 1/2 MeCN (6⋅3 1/2 MeCN). The molecular structures of 1 to 6 are reported. Complexes 1, 3, and 4 were screened as precatalysts for the polymerisation of ethylene in the presence of cocatalysts at various temperatures and for the copolymerisation of ethylene with propylene. Activities as high as 136 000 g (mmol(V) h)(-1) were sometimes achieved; higher molecular weight polymers could be obtained versus the benchmark [VO(OEt)Cl2 ]. For copolymerisation, incorporation of propylene was 7.1-10.9 mol % (compare 10 mol % for [VO(OEt)Cl2 ]), although catalytic activities were lower than [VO(OEt)Cl2 ].

Catalytic asymmetric crotylation of aldehydes: application in total synthesis of (-)-elisabethadione.

A new, highly efficient Lewis base catalyst for a practical enantio- and diastereoselective crotylation of unsaturated aldehydes with E- and Z-crotyltrichlorosilanes has been developed. The method was employed as a key step in a novel asymmetric synthesis of bioactive serrulatane diterpene (-)-elisabethadione. Other strategic reactions for setting up the stereogenic centers included anionic oxy-Cope rearrangement and cationic cyclization. The synthetic route relies on simple, high yielding reactions and avoids use of protecting groups or chiral auxiliaries.

Regioselective Substitution at the 1,3- and 6,8-Positions of Pyrene for the Construction of Small Dipolar Molecules.

This article presents a novel asymmetrical functionalization strategy for the construction of dipolar molecules via efficient regioselective functionalization along the Z-axis of pyrene at both the 1,3- and 6,8-positions. Three asymmetrically substituted 1,3-diphenyl-6,8-R-disubsituted pyrenes were fully characterized by X-ray crystallography, photophysical properties, electrochemistry, and density functional theory calculations.

Atropo- and Diastereoselective Construction of Tetracyclic Biphenylazepinium Salts Derived from Aminoalcohols: Use as Catalysts in Enantioselective Asymmetric Epoxidation.

A range of new biphenylazepinium salt organocatalysts effective for asymmetric epoxidation has been developed incorporating an additional substituted oxazolidine ring, and providing improved enantiocontrol in alkene epoxidation over the parent structure. Starting from enantiomerically pure aminoalcohols, tetracyclic iminium salts were obtained as single diastereoisomers through an atroposelective oxazolidine formation.

The first study about the relationship between the extractability of thiacalix[4]arene derivatives and the position of the coordination binding sites.

Three organic ionophores (2-4) based on the p-tert-butylthiacalix[4]arene backbone, blocked in the 1,3-alternate conformation, bearing two pyridyl coordinating moieties (ortho for 2, meta for 3 and para for 4), have been synthesized and characterized in the solid state. The solvent extraction experiments with the metal ions showed that the ability of these derivatives to complex with Ag(+) appeared to be largely dependent on the position of the nitrogen atoms of the pyridyl ring. Two different complexation modes have been confirmed by 1H NMR titration. Ionophore 2 armed with two pyridyl moieties, complexed with Ag(+) cation through N···Ag(+)···S interactions; however, ionophore 3 and ionophore 4 complexed with Ag(+) through metal-nitrogen (N···Ag(+)) interactions. The DFT computational studies were consistent with the experimental findings. These findings will provide us with an important rule to design an appropriate thiacalix[4]arene ionophore in the future. Another study on the possibility for application of ionophores 2-4 for the treatment of waste water containing Cr(VI) and Cr(III), showed that ionophore 3 was useful in the application of the solvent extraction method in selective treatment of waste water containing Cr(VI) and Cr(III) prior to discharge.

Palladium-catalyzed stereoselective intramolecular oxidative amidation of alkenes in the synthesis of 1,3- and 1,4-amino alcohols and 1,3-diamines.

An efficient and practical Pd-catalyzed intramolecular oxidative allylic amidation provides facile access to derivatives of 1,3- and 1,4-amino alcohols and 1,3-diamines. The method operates under mild reaction conditions (RT) with molecular oxygen (1 atm) as the sole reoxidant of Pd. Excellent diastereoselectivities were attained with substrates bearing a secondary stereogenic center.