DNA bending by Cro protein in specific and nonspecific complexes: implications for protein site recognition and specificity.

Scanning force microscopy was used to resolve lambda Cro protein when bound as a single dimer or multiple dimers to its three operator (OR) sites. The bend angles induced by binding of Cro to specific and nonspecific sites were determined and are 69 degrees +/- 11 degrees for specific and 62 degrees +/- 23 degrees for nonspecific complexes. Bending of the nonspecific sites is advantageous for a protein such as Cro that bends its specific site, because it increases the binding specificity of the protein and it can be used by the protein to sample contacts required for the recognition of its target sequence. It is proposed here that bending of nonspecific DNA may be a general property among DNA binding proteins that bend their specific sites.

Multiple RNA polymerase conformations and GreA: control of the fidelity of transcription.

Pre-steady state kinetics of misincorporation were used to investigate the addition of single nucleotides to nascent RNA by Escherichia coli RNA polymerase during transcription elongation. The results were fit with a branched kinetic mechanism that permits conformational switching, at each template position, between an activated and an unactivated enzyme complex, both of which can bind nucleotide triphosphates (NTPs) from solution. The complex exists most often in the long-lived activated state, and only becomes unactivated when transcription is slowed. This model permits multiple levels of nucleotide discrimination in transcription, since the complex can be "kinetically trapped" in the unactivated state in the absence of the correct NTP or if the 3' terminal residue is incorrectly matched. The transcription cleavage factor GreA (or an activity enhanced by GreA) increased the fidelity of transcription by preferential cleavage of transcripts containing misincorporated residues in the unactivated state of the elongation complex. This cleavage mechanism by GreA may prevent the formation of "dead-end" transcription complexes in vivo.

Single-Molecule FRET to Measure Conformational Dynamics of DNA Mismatch Repair Proteins.

Single-molecule FRET measurements have a unique sensitivity to protein conformational dynamics. The FRET signals can either be interpreted quantitatively to provide estimates of absolute distance in a molecule configuration or can be qualitatively interpreted as distinct states, from which quantitative kinetic schemes for conformational transitions can be deduced. Here we describe methods utilizing single-molecule FRET to reveal the conformational dynamics of the proteins responsible for DNA mismatch repair. Experimental details about the proteins, DNA substrates, fluorescent labeling, and data analysis are included. The complementarity of single molecule and ensemble kinetic methods is discussed as well.

High affinity cooperative DNA binding by the yeast Mlh1-Pms1 heterodimer.

We demonstrate here that the Saccharomyces cerevisiae Mlh1-Pms1 heterodimer required for DNA mismatch repair and other cellular processes is a DNA binding protein. Binding was evaluated using a variety of single and double-stranded DNA molecules. Mlh1-Pms1 bound short substrates with low affinity and showed a slight preference for single-stranded DNA. In contrast, Mlh1-Pms1 exhibited a much higher affinity for long DNA molecules, suggesting that binding is cooperative. High affinity binding required a duplex DNA length greater than 241 base-pairs. The rate of association with DNA was rapid and dissociation of protein-DNA complexes following extensive dilution was very slow. However, in competition experiments, we observed a rapid active transfer of Mlh1-Pms1 from labeled to unlabeled DNA. Binding was non-sequence specific and highly sensitive to salt type and concentration, suggesting that Mlh1-Pms1 primarily interacts with the DNA backbone via ionic contacts. Cooperative binding was observed visually by atomic force microscopy as long, continuous tracts of Mlh1-Pms1 protein bound to duplex DNA. These images also showed that Mlh1-Pms1 simultaneously interacts with two different regions of duplex DNA. Taken together, the atomic force microscope images and DNA binding assays provide strong evidence that Mlh1-Pms1 binds duplex DNA with positive cooperativity and that there is more than one DNA binding site on the heterodimer. These DNA binding properties of Mlh1-Pms1 may be relevant to its participation in DNA mismatch repair, recombination and cellular responses to DNA damage.

High accuracy FIONA-AFM hybrid imaging.

Multi-protein complexes are ubiquitous and play essential roles in many biological mechanisms. Single molecule imaging techniques such as electron microscopy (EM) and atomic force microscopy (AFM) are powerful methods for characterizing the structural properties of multi-protein and multi-protein-DNA complexes. However, a significant limitation to these techniques is the ability to distinguish different proteins from one another. Here, we combine high resolution fluorescence microscopy and AFM (FIONA-AFM) to allow the identification of different proteins in such complexes. Using quantum dots as fiducial markers in addition to fluorescently labeled proteins, we are able to align fluorescence and AFM information to ≥8nm accuracy. This accuracy is sufficient to identify individual fluorescently labeled proteins in most multi-protein complexes. We investigate the limitations of localization precision and accuracy in fluorescence and AFM images separately and their effects on the overall registration accuracy of FIONA-AFM hybrid images. This combination of the two orthogonal techniques (FIONA and AFM) opens a wide spectrum of possible applications to the study of protein interactions, because AFM can yield high resolution (5-10nm) information about the conformational properties of multi-protein complexes and the fluorescence can indicate spatial relationships of the proteins in the complexes.

A novel single-molecule study to determine protein--protein association constants.

Atomic force microscopy (AFM) is traditionally used as an imaging technique to gain qualitative information for a biological system. We have successfully used the imaging capabilities of the AFM to determine protein-protein association constants. We have developed a method to measure the molecular weight of a protein based on its volume determined from AFM images. Our volume determination method allows for rapid, accurate analysis of large protein populations. On the basis of the measured volume, the fraction of monomers as dimers was determined for the DNA helicase UvrD, and the dissociation constant (K(d)) for the helicase was calculated. We determined a K(d) for UvrD of 1.4 microM, which is in good agreement with published K(d) data obtained from analytical ultracentrifugation (AUC) studies. Our method provides a rapid method for determining protein-protein association constants.

A Monte Carlo method for generating structures of short single-stranded DNA sequences.

A Monte Carlo method has been developed for generating the conformations of short single-stranded DNAs from arbitrary starting states. The chain conformers are constructed from energetically favorable arrangements of the constituent mononucleotides. Minimum energy states of individual dinucleotide monophosphate molecules are identified using a torsion angle minimizer. The glycosyl and acyclic backbone torsions of the dimers are allowed to vary, while the sugar rings are held fixed in one of the two preferred puckered forms. A total of 108 conformationally distinct states per dimer are considered in this first stage of minimization. The torsion angles within 5 kcal/mole of the global minimum in the resulting optimized states are then allowed to vary by +/- 10 degrees in an effort to estimate the breadth of the different local minima. The energies of a total of 2187 (3(7)) angle combinations are examined per local conformational minimum. Finally, the energies of all dinucleotide conformers are scaled so that the populations of differently puckered sugar rings in the theoretical sample match those found in nmr solution studies. This last step is necessitated by limitations in the theoretical methods to predict DNA sugar puckering accurately. The conformer populations of the individual acyclic torsion angles in the composite dimer ensembles are found to be in good agreement with the distributions of backbone conformations deduced from nmr coupling constants and the frequencies of glycosyl conformations in x-ray crystal structures, suggesting that the low energy states are reasonable. The low energy dimer forms (consisting of 150-325 conformational states per dimer step) are next used as variables in a Monte Carlo algorithm, which generates the conformations of single-stranded d(CXnG) chains, where X = A, T and n = 3, 4, 5. The oligonucleotides are built sequentially from the 5' end of the chain using random numbers to select the conformations of overlapping dimer units. The simulations are very fast, involving a total of 10(6) conformations per chain sequence. The potential errors in the buildup procedure are minimized by taking advantage of known rotational interdependences in the sugar-phosphate backbone. The distributions of oligonucleotide conformations are examined in terms of the magnitudes, positions, and orientations of the end-to-end vectors of the chains. The differences in overall flexibility and extension of the oligomers are discussed in terms of the conformations of the constituent dinucleotide steps, while the general methodology is discussed and compared with other nucleic acid model building techniques.

Human factor IX binds to specific sites on the collagenous domain of collagen IV.

The primary region of factor IX that mediates binding to bovine aortic endothelial cells resides in residues 3-11 of the N-terminal region known as the Gla domain. Recently, it was proposed that the observed binding to endothelial cells is actually a measure of the interaction between factor IX and collagen IV (Cheung, W. F., van den Born, J., Kuhn, K., Kjellen, L., Hudson, B. G., and Stafford, D. W. (1996) Proc. Natl. Acad. Sci. U. S. A. 93, 11068-11073). To confirm that factor IX binds to collagen IV and to examine the specificity of this interaction, we used scanning force microscopy to examine factor IX binding to collagen IV. We imaged collagen IV in the presence and the absence of factor IX and observed specific interactions between factor IX and collagen IV. Our results demonstrate that factor IX binds to collagen IV at specific sites in the collagenous domain approximately 98 and approximately 50 nm from the C-terminal pepsin-cleaved end.

Allosteric binding of nucleoside triphosphates to RNA polymerase regulates transcription elongation.

The regulation of transcription elongation and termination appears to be governed by the ability of RNA polymerase elongation complexes to adopt multiple conformational states; however, the factors controlling the distribution between these states remain elusive. We used transient-state kinetics to investigate the incorporation of single nucleotides. We demonstrate that E. coli RNA polymerase contains an allosteric binding site in addition to the catalytic site. Binding of the templated nucleoside triphosphate (NTP), but not nontemplated NTPs, to this site increases the rate of nucleotide incorporation. The data suggest that RNA polymerase can exist in a state that catalyzes synthesis slowly (unactivated) and one that catalyzes synthesis rapidly (activated), with the transition from the slow to the fast state being induced by binding of the templated NTP to the allosteric site.

Purification and initial characterization of RNA polymerase from Thermus thermophilus strain HB8.

Utilizing a novel and rapid two-column purification procedure, the DNA-dependent RNA polymerase (RNAP) from the thermophile, Thermus thermophilus HB8, was purified to electrophoretic homogeneity with a recovery of 65% (as determined by RNAP activity) in less than 2 days. The purified enzyme was characterized using DNA containing the lambdaP(R) promoter. KMnO(4) footprinting, abortive initiation assays, and the formation of the specific stalled elongation complex provide compelling evidence that T. thermophilus RNA polymerase can bind to DNA containing the lambdaP(R) promoter, form an open complex, and initiate transcription in a temperature-dependent manner. This evidence suggests that T. thermophilus RNAP possesses less intrinsic binding energy than E. coli RNAP. Instead, T. thermophilus relies on the high temperatures of its environment to provide the thermal energy required to stimulate open promoter complex formation, initiate transcription, and facilitate the conformational changes in RNA polymerase that result in nucleotide incorporation.

Following the assembly of RNA polymerase-DNA complexes in aqueous solutions with the scanning force microscope.

The capability of the scanning force microscope (SFM) to image molecules in aqueous buffers has opened the exciting possibility of following processes of molecular assembly in real time and in near-physiological environments. This capability is demonstrated in this paper by following the assembly process of RNA polymerase-DNA complexes. DNA fragments deposited on mica and imaged in Hepes/MgCl2 are shown before and after Escherichia coli RNA polymerase holoenzyme is injected in the SFM liquid chamber. The protein can recognize and bind to these DNA fragments within several seconds after injection, suggesting that the protein and the DNA retain their native configuration after deposition and during SFM imaging. A time-lapse sequence depicting the process of assembly of RNA polymerase-DNA complexes is shown. These results represent the first step for acquiring the capabilities to monitor complex biomolecular processes as they take place in ionic solutions and to characterize their spatial organization.

The single-nucleotide addition cycle in transcription: a biophysical and biochemical perspective.

This review has summarized the known features of the single-nucleotide addition reaction cycle in transcription. The reader will have noted that the information available is very incomplete, and that, in some cases, related experiments seem to lead to contradictory conclusions. We have tried to point out these discrepancies as they occur and to indicate areas where more experimentation is needed. We look forward to the day when all the microscopic steps of the single-nucleotide addition cycle can be identified and defined in thermodynamic, kinetic, and structural terms. At that point, we can begin to understand the principles that relate these parameters to template position and to the pathway of formation of a specific complex. It should be possible to provide specific molecular interpretations for observed effects on activation barrier heights to elongation and termination (154, 155) and to begin to understand the molecular bases of the regulation in these phases of transcription. Much work remains before this happy situation can be totally realized, but we feel that now the problem can at least be approached at this level. We hope that this review helps to illuminate the difficulties that remain.

Theoretical predictions of DNA hairpin loop conformations: correlations with thermodynamic and spectroscopic data.

A computational procedure for generating conformations of DNA hairpin loop structures from a broad range of low-energy starting states is described. The starting point of the modeling is the distribution of oligonucleotide chain conformations obtained from Monte Carlo simulations of feasible dinucleotide steps. Structures which meet the spatial criteria for hairpin loop formation are selected from the distributions and subsequently minimized using all-atom molecular mechanics. Both d(CTnG) and d(CAnG) oligomers, where n = 3, 4, or 5, are modeled. These sequences are chosen because of the large number of published NMR and thermodynamic studies on DNA hairpins containing thymine or adenine residues. The minimized three-dimensional hairpin loop structures are compared with one another as well as analyzed in terms of available experimental data. The computational approach provides the first detailed analysis of DNA hairpin loop structure in terms of a multistate conformational model. Investigation of the minimized conformations reveals several interesting structural features. First, hairpin loops of the same sequence adopt several distinctly different conformations, as opposed to minor variants of the same equilibrium structure, that could potentially interconvert in solution. Second, in contrast to double-helical nucleic acids, the hairpin loop models exhibit hydrophobic and hydrophilic surfaces. The different disposition of hydrophobic groups in loops versus duplexes could modulate both protein-nucleic acid interactions and nucleic acid self-associations. Third, perpendicular aromatic interactions of loop residues are observed in many of the computed hairpins. This sort of interaction might be important in the stabilization of non-hydrogen-bonded nucleic acid secondary and tertiary structures. The predicted structural features in the models help, in addition, to account for the unusual thermodynamic properties of DNA hairpin loops. Comparison of the theoretically-generated NOEs in different structures further reveals that very different molecular structures and interactions can, in principle, produce the same NOEs. The multistate description suggested by this observation differs from the conventional interpretation of DNA solution structure in terms of the fluctuations about a single preferred chain conformation. There is not necessarily only one set of closely related structures consistent with the observed data.

Osmolyte-induced changes in protein conformational equilibria.

Examining solute-induced changes in protein conformational equilibria is a long-standing method for probing the role of water in maintaining protein stability. Interpreting the molecular details governing the solute-induced effects, however, remains controversial. We present experimental and theoretical data for osmolyte-induced changes in the stabilities of the A and N states of yeast iso-1-ferricytochrome c. Using polyol osmolytes of increasing size, we observe that osmolytes alone induce A-state formation from acid-denatured cytochrome c and N state formation from the thermally denatured protein. The stabilities of the A and N states increase linearly with osmolyte concentration. Interestingly, osmolytes stabilize the A state to a greater degree than the N state. To interpret the data, we divide the free energy for the reaction into contributions from nonspecific steric repulsions (excluded volume effects) and from binding interactions. We use scaled particle theory (SPT) to estimate the free energy contributions from steric repulsions, and we estimate the contributions from water-protein and osmolyte-protein binding interactions by comparing the SPT calculations to experimental data. We conclude that excluded volume effects are the primary stabilizing force, with changes in water-protein and solute-protein binding interactions making favorable contributions to stability of the A state and unfavorable contributions to the stability of the N state. The validity of our interpretation is strengthened by analysis of data on osmolyte-induced protein stabilization from the literature, and by comparison with other analyses of solute-induced changes in conformational equilibria.

Sugar-induced molten-globule model.

Proteins denature at low pH because of intramolecular electrostatic repulsions. The addition of salt partially overcomes this repulsion for some proteins, yielding a collapsed conformation called the A-state. A-states have characteristics expected for the molten globule, a notional kinetic protein folding intermediate. Here we show that the addition of neutral sugars to solutions of acid-denatured equine ferricytochrome c induces formation of the A-state in the absence of added salt. We characterized the structure and stability of the sugar-induced A-state with circular dichroism spectropolarimetry (CD) and NMR-monitored hydrogen-deuterium exchange experiments. We also examined the stability of the sugar-induced A-state as a function of sugar size and concentration. The results are interpreted using several models and we conclude that the stabilizing effect is consistent with increased steric repulsion between the protein and the sugar solutions.

Interpreting the effects of small uncharged solutes on protein-folding equilibria.

Proteins are designed to function in environments crowded by cosolutes, but most studies of protein equilibria are conducted in dilute solution. While there is no doubt that crowding changes protein equilibria, interpretations of the changes remain controversial. This review combines experimental observations on the effect of small uncharged cosolutes (mostly sugars) on protein stability with a discussion of the thermodynamics of cosolute-induced nonideality and critical assessments of the most commonly applied interpretations. Despite the controversy surrounding the most appropriate manner for interpreting these effects of thermodynamic nonideality arising from the presence of small cosolutes, experimental advantage may still be taken of the ability of the cosolute effect to promote not only protein stabilization but also protein self-association and complex formation between dissimilar reactants. This phenomenon clearly has potential ramifications in the cell, where the crowded environment could well induce the same effects.

Melting behavior of a covalently closed, single-stranded, circular DNA.

We synthesized the 26-residue deoxynucleotide sequence d(TTCCT5GGAATTCCT5GGAA) which folds intramolecularly to form a dumbbell-shaped, double-hairpin structure with a gap between the 3' and the 5' ends. We used T4 polynucleotide kinase to phosphorylate the 5' end followed by T4 DNA ligase to close the 3' and 5' ends. Melting of the dumbbell structure formed by this ligated sequence produces a covalently closed, single-stranded, circular final state. We employed calorimetric and spectroscopic techniques to characterize thermodynamically the melting behavior of the ligated molecule and compared it with the corresponding melting behavior of its unligated precursor. This comparison allowed us to characterize uniquely the influence of single-stranded ring closure on intramolecular duplex melting. The data reveal that ring closure produces a thermally more stable structure which exhibits significantly altered melting thermodynamics. We rationalize these thermodynamic differences in terms of differential solvation and differential counterion association between the ligated and unligated molecules. We also note the importance of such constrained dumbbell structures as models for hairpins, cruciforms, and locally melted domains within naturally occurring DNA polymers.

Visualization and mechanical manipulations of individual fibrin fibers suggest that fiber cross section has fractal dimension 1.3.

We report protocols and techniques to image and mechanically manipulate individual fibrin fibers, which are key structural components of blood clots. Using atomic force microscopy-based lateral force manipulations we determined the rupture force, FR, f fibrin fibers as a function of their diameter, D, in ambient conditions. As expected, the rupture force increases with increasing diameter; however, somewhat unexpectedly, it increases as FR approximately D1.30+/-0.06. Moreover, using a combined atomic force microscopy-fluorescence microscopy instrument, we determined the light intensity, I, of single fibers, that were formed with fluorescently labeled fibrinogen, as a function of their diameter, D. Similar to the force data, we found that the light intensity, and thus the number of molecules per cross section, increases as I approximately D1.25+/-0.11. Based on these findings we propose that fibrin fibers are fractals for which the number of molecules per cross section increases as about D1.3. This implies that the molecule density varies as rhoD approximately D -0.7, i.e., thinner fibers are denser than thicker fibers. Such a model would be consistent with the observation that fibrin fibers consist of 70-80% water and only 20-30% protein, which also suggests that fibrin fibers are very porous.