RESUMO
With the rapid growth and development of proton-exchange membrane fuel cell (PEMFC) technology, there has been increasing demand for clean and sustainable global energy applications. Of the many device-level and infrastructure challenges that need to be overcome before wide commercialization can be realized, one of the most critical ones is increasing the PEMFC power density, and ambitious goals have been proposed globally. For example, the short- and long-term power density goals of Japan's New Energy and Industrial Technology Development Organization are 6 kilowatts per litre by 2030 and 9 kilowatts per litre by 2040, respectively. To this end, here we propose technical development directions for next-generation high-power-density PEMFCs. We present the latest ideas for improvements in the membrane electrode assembly and its components with regard to water and thermal management and materials. These concepts are expected to be implemented in next-generation PEMFCs to achieve high power density.
RESUMO
Understanding the ice nucleation mechanism in the catalyst layers (CLs) of proton exchange membrane (PEM) fuel cells and inhibiting icing by designing the CLs can optimize the cold start strategies, which can enhance the performance of PEM fuel cells. Herein, mitigating the structural matching and templating effects by adjusting the surface morphology and wettability can inhibit icing on the platinum (Pt) catalyst surface effectively. The Pt(211) surface can inhibit icing because the atomic spacing of (211) crystalline surface is much larger than the characteristic distance of ice crystal, thereby mitigating the structural matching effects. A water overlayer on the Pt surface induced by the strong attraction of Pt can act as a template for ice layers and plays an important role in the icing process. Buckling of water overlayer due to the larger atomic spacing of (211) crystalline surface mitigates the templating effect and inhibits icing. Moreover, the water overlayer on the hydrophobic Pt(211) surface with fewer water molecules also mitigates the templating effect, which makes ice nucleation more difficult than homogeneous nucleation. These findings reveal the ice nucleation mechanisms on the Pt catalyst surface from the molecular level and are valuable for catalyst designs to inhibit icing in CL.
RESUMO
Proton exchange membrane (PEM) fuel cell faces the inevitable challenge of the cold start at a sub-freezing temperature. Understanding the underlying degradation mechanisms in the cold start and developing a better starting strategy to achieve a quick startup with no degradation are essential for the wide application of PEM fuel cells. In this study, the comprehensive in situ non-accelerated segmented techniques are developed to analyze the icing processes and obtain the degradation mechanisms under the conditions of freeze-thaw cycle, voltage reversal, and ice formation in different components of PEM fuel cells for different freezing time. A detailed degradation mechanism map in the cold start of PEM fuel cells is proposed to demonstrate how much degradation occurs under different conditions, whether the ice formation is acceptable under the actual operating conditions, and how to suppress the ice formation. Moreover, an ideal starting strategy is developed to achieve the cold start of PEM fuel cells without degradation. This map is highly valuable and useful for researchers to understand the underlying degradation mechanisms and develop the cold start strategy, thereby promoting the commercialization of PEM fuel cells.
RESUMO
Proton exchange membrane (PEM) fuel cell has been regarded as a promising approach to the decarbonization and diversification of energy sources. In recent years, durability and cost issues of PEM fuel cells are increasingly significant with the rapid increase of power density. However, the failure to maintain the cell consistency, as one major cause of the above issue, has attracted little attention. Therefore, this study intends to figure out the underlying cause of cell inconsistency and provide solutions to it from the perspective of multi-physics transport coupled with electrochemical reactions. The PEM fuel cells with electrodes under two compression modes are firstly discussed to fully explain the relationship of cell performance and consistency to electrode structure and multi-physics transport. The result indicates that one main cause of cell inconsistency is the intrinsic conflict between the separated transport and cooperated consumption of oxygen and electron throughout the active area. Then, a mixed-pathway electrode design is proposed to reduce the cell inconsistency by enhancing the mixed transport of oxygen and electron in the electrode. It is found that the mixing of pathways in electrodes at under-rib region is more effective than that at the under-channel region, and can achieve an up to 40% reduction of the cell inconsistency with little (3.3%) sacrificed performance. In addition, all the investigations are implemented based on a self-developed digitalization platform that reconstructs the complex physical-chemical system of PEM fuel cells. The fully observable physical information of the digitalized cells provides strong support to the related analysis.
RESUMO
The O2 permeation barrier across the nanoscale ionomer films on electrocatalysts contributes to a major performance loss of proton exchange membrane (PEM) fuel cells under low Pt loading. Enhancing O2 transport through the ionomer films is essential for developing low Pt loading catalyst materials in high-performance PEM fuel cells. This study found that adding an ionic liquid (IL) can effectively mitigate the dense ionomer ultrathin sublayer formed on the Pt surface, which severely hinders O2 transport to the catalyst sites. The molecular dynamics simulation results show that adding the IL significantly alters the ionomer ultrathin sublayer structure by inhibiting its tight arrangement of perfluorosulfonic acid chains but scarcely impacts the ultrathin sublayer thickness. Additionally, the IL addition provides a larger free space for O2 dissolution in the ultrathin sublayer. Consequently, due to IL molecules' presence, the O2 density in the ultrathin sublayer on the Pt surface is improved by an order of magnitude, which will benefit the catalytic efficiency, and the O2 permeation flux across the ionomer film is increased by up to 8 times, which will reduce the O2 transport loss of the catalyst layer.
RESUMO
Understanding the O2 permeation phenomenon in the ionomer thin film on platinum (Pt) nanoparticles is vital to improve the electrocatalyst performance of proton exchange membrane fuel cells at a low Pt loading. In this study, the ionomer film structure, O2 density distribution, transport fluxes, and permeation routes are investigated for carbon-supported polyhedral Pt nanoparticles (cube and tetrahedron) in the facet, edge, and corner regions. The molecular dynamic simulation takes into account the molecular interactions among the ionomer, Pt nanoparticles, carbon support, and O2 molecules. The results show that a dense ionomer ultrathin layer with a tight arrangement of perfluorosulfonic acid is present on the Pt facets (namely region A). In the ionomer near the Pt edges and corners (namely region B), the structure is less dense due to the weaker Pt attraction, resulting in a higher O2 density than that in region A. O2 fluxes in the different regions show that approximately 90% of O2 molecules reach the Pt cube and tetrahedron nanoparticles via their upper corner and edge regions. In the vicinity of Pt nanoparticles, O2 permeation routes are inferred to penetrating region B to the Pt upper corners or edges instead of region A to the Pt facets.
RESUMO
Combined molecular dynamics (MD) simulation and experiment are adopted to gain the mechanism of water content on the electrochemical surface area (ECSA) of the catalyst layer in a proton exchange membrane fuel cell. The morphology of water domains in the catalyst layer has a strong impact on the ECSA via MD simulation. The morphology of the water domains is isolated water clusters at low water content, resulting in the poor ECSA due to the lack of proton transport paths. The transport paths of protons tend to be quickly established with increasing water content during the transition process of the morphology of water domains from isolated water clusters to the water channel network, thereby leading to the rapid increase of the ECSA. However, the slight increase of the ECSA at high water content mainly results from the improved contact area between water domains and Pt particle instead of the formation of new transport paths. In addition, the stronger binding of water molecules and the Pt particle at low temperature results in a higher ECSA.