Cis-suppression to arrest protein aggregation in mammalian cells.

Protein misfolding and aggregation are implicated in numerous human diseases and significantly lower production yield of proteins expressed in mammalian cells. Despite the importance of understanding and suppressing protein aggregation in mammalian cells, a protein design and selection strategy to modulate protein misfolding/aggregation in mammalian cells has not yet been reported. In this work, we address the particular challenge presented by mutation-induced protein aggregation in mammalian cells. We hypothesize that an additional mutation(s) can be introduced in an aggregation-prone protein variant, spatially near the original mutation, to suppress misfolding and aggregation (cis-suppression). As a model protein, we chose human copper, zinc superoxide dismutase mutant (SOD1(A4V) ) containing an alanine to valine mutation at residue 4, associated with the familial form of amyotrophic lateral sclerosis. We used the program RosettaDesign to identify Phe20 in SOD1(A4V) as a key residue responsible for SOD1(A4V) conformational destabilization. This information was used to rationally develop a pool of candidate mutations at the Phe20 site. After two rounds of mammalian-cell based screening of the variants, three novel SOD1(A4V) variants with a significantly reduced aggregation propensity inside cells were selected. The enhanced stability and reduced aggregation propensity of the three novel SOD1(A4V) variants were verified using cell fractionation and in vitro stability assays.

Distinct aggregation mechanisms of monoclonal antibody under thermal and freeze-thaw stresses revealed by hydrogen exchange.

PURPOSE: Aggregation of monoclonal antibodies (mAbs) is a common yet poorly understood issue in therapeutic development. There remains a need for high-resolution structural information about conformational changes and intermolecular contacts during antibody aggregation. METHODS: We used hydrogen exchange mass spectrometry (HX-MS) to compare the aggregation mechanism and resultant aggregate structures of the pharmaceutical antibody Bevacizumab under freeze-thaw (F/T) and thermal stresses. RESULTS: Bevacizumab aggregation increased with number of F/T cycles and decreased with protein concentration. HX-MS showed native-like aggregates. Conversely, thermal stress triggered non-native aggregation at temperatures below melting point of the least stable CH2 domain. Under these conditions, HX was significantly enhanced in much of the Fab fragment while being decreased relative to native HX in CDRs. Analysis of intrinsic fluorescence Trp and extrinsic ANS dye binding supported structural differences between two antibody aggregates formed by F/T vs. thermal stresses. CONCLUSIONS: Reduced hydrogen exchange in three CDRs suggests these residues may form strong intermolecular contacts in the antibody aggregates; regions of enhanced HX indicate unfolding. Residue level modeling methods with varying levels of atomistic detail were unable to identify aggregation patterns predictively.

Computational design and biophysical characterization of aggregation-resistant point mutations for γD crystallin illustrate a balance of conformational stability and intrinsic aggregation propensity.

γD crystallin is a natively monomeric eye-lens protein that is associated with hereditary juvenile cataract formation. It is an attractive model system as a multidomain Greek-key protein that aggregates through partially folded intermediates. Point mutations M69Q and S130P were used to test (1) whether the protein-design algorithm RosettaDesign would successfully predict mutants that are resistant to aggregation when combined with informatic sequence-based predictors of peptide aggregation propensity and (2) how the mutations affected relative unfolding free energies (ΔΔG(un)) and intrinsic aggregation propensity (IAP). M69Q was predicted to have ΔΔG(un) ≫ 0, without significantly affecting IAP. S130P was predicted to have ΔΔG(un) ∼ 0 but with reduced IAP. The stability, conformation, and aggregation kinetics in acidic solution were experimentally characterized and compared for the variants and wild-type (WT) protein using circular dichroism and intrinsic fluorescence spectroscopy, calorimetric and chemical unfolding, thioflavin-T binding, chromatography, static laser light scattering, and kinetic modeling. Monomer secondary and tertiary structures of both variants were indistinguishable from WT, while ΔΔG(un) > 0 for M69Q and ΔΔG(un) < 0 for S130P. Surprisingly, despite being the least conformationally stable, S130P was the most resistant to aggregation, indicating a significant decrease of its IAP compared to WT and M69Q.

Protein stability and structure in HIC: hydrogen exchange experiments and COREX calculations.

Hydrogen exchange mass spectrometry (HXMS) coupled to proteolytic digestion has been used to probe the conformation of bovine ß-lactoglobulin (BLG), bovine α-lactalbumin (BLA), and human serum albumin (HSA) in solution and while adsorbed to the hydrophobic interaction chromatography media Phenyl Sepharose 6FF. All three proteins show evidence of EX1 exchange kinetics, indicating a loss of stability on the surface. HX protection patterns for all three proteins also indicate that the unfolded form is only partially solvent exposed. The hydrogen-deuterium exchange patterns of BLG and BLA on the surface suggest a structure that resembles each protein's respective solution phase molten globule state. The low stability of Domain II of HSA observed on Phenyl Sepharose 6FF also suggests a link to solution stability because Domain II is frequently cited as the least stable domain in solution unfolding pathways. COREX, an algorithm used to compute protein folding stabilities, correctly predicts solution hydrogen-deuterium exchange patterns for BLG and offers insight into its adsorbed phase stabilities but is unreliable for BLA predictions. The results of this work demonstrate a link between solution-phase local stability patterns and the nature of partially unfolded states that proteins can adopt on HIC surfaces.

A new approach to explore the impact of freeze-thaw cycling on protein structure: hydrogen/deuterium exchange mass spectrometry (HX-MS).

PURPOSE: The impact of freeze-thaw (F/T) on structure integrity of protein therapeutics is poorly understood, partially due to lack of methods to detect protein structural perturbations during F/T processing in the frozen state. METHODS: A new approach of hydrogen/deuterium exchange was developed to separate and distinguish the specific impact of single freezing and F/T cycling on protein structure, using lactate dehydrogenase (LDH) as model system. RESULTS: In the freezing process, a fraction of LDH molecules that was inversely dependent on protein concentration was observed to partially denature its structure. Local structural perturbations were localized by peptide level HX analysis to the surface residues in segments 91-132, 170-237 and 288-331. In contrast, F/T cycling led to irreversible LDH aggregation with global structural unfolding. Residual solvent-protected structure was only detected in the aggregates for three segments, 13-31, 109-117 and 133-143, that were coincident with the consensus aggregation hotspots predicted by four different algorithms. CONCLUSIONS: Results indicate freezing preferentially disturbs local structure at the surface residues, consistent with ice-solution interface-mediated denaturation mechanism. F/T-induced aggregation begins as partial denaturation during freezing, but is accompanied by more comprehensive structural rearrangement during F/T cycling.

Molecular level insights into thermally induced α-chymotrypsinogen A amyloid aggregation mechanism and semiflexible protofibril morphology.

Understanding nonnative protein aggregation is critical not only to a number of amyloidosis disorders but also for the development of effective and safe biopharmaceuticals. In a series of previous studies [Weiss et al. (2007) Biophys. J. 93, 4392-4403; Andrews et al. (2007) Biochemistry 46, 7558-7571; Andrews et al. (2008) Biochemistry 47, 2397-2403], α-chymotrypsinogen A (aCgn) and bovine granulocyte colony stimulating factor (bG-CSF) have been shown to exhibit the kinetic and morphological features of other nonnative aggregating proteins at low pH and ionic strength. In this study, we investigated the structural mechanism of aCgn aggregation. The resultant aCgn aggregates were found to be soluble and exhibited semiflexible filamentous aggregate morphology under transmission electron microscopy. In addition, the filamentous aggregates were demonstrated to possess amyloid characteristics by both Congo red binding and X-ray diffraction. Peptide level hydrogen exchange (HX) analysis suggested that a buried native ß-sheet comprised of three peptide segments (39-46, 51-64, and 106-114) reorganizes into the cross-ß amyloid core of aCgn aggregates and that at least ∼50% of the sequence adopts a disordered structure in the aggregates. Furthermore, the equimolar, bimodal HX labeling distribution observed for three reported peptides (65-102, 160-180, and 229-245) suggested a heterogeneous assembly of two molecular conformations in aCgn aggregates. This demonstrates that extended ß-sheet interactions typical of the amyloid are sufficiently strong that a relatively small fraction of polypeptide sequence can drive formation of filamentous aggregates even under conditions favoring colloidal stability.

Membrane interactions of a self-assembling model peptide that mimics the self-association, structure and toxicity of Abeta(1-40).

Beta-amyloid peptide (Abeta) is a primary protein component of senile plaques in Alzheimer's disease (AD) and plays an important, but not fully understood role in neurotoxicity. Model peptides with the demonstrated ability to mimic the structural and toxicity behavior of Abeta could provide a means to evaluate the contributions to toxicity that are common to self-associating peptides from many disease states. In this work, we have studied the peptide-membrane interactions of a model beta-sheet peptide, P(11-2) (CH(3)CO-Gln-Gln-Arg-Phe-Gln-Trp-Gln-Phe-Glu-Gln-Gln-NH(2)), by fluorescence, infrared spectroscopy, and hydrogen-deuterium exchange. Like Abeta(1-40), the peptide is toxic, and conditions which produce intermediate oligomers show higher toxicity against cells than either monomeric forms or higher aggregates of the peptide. Further, P(11-2) also binds to both zwitterionic (POPC) and negatively charged (POPC:POPG) liposomes, acquires a partial beta-sheet conformation in presence of lipid, and is protected against deuterium exchange in the presence of lipids. The results show that a simple rationally designed model beta-sheet peptide recapitulates many important features of Abeta peptide structure and function, reinforcing the idea that toxicity arises, at least in part, from a common mode of action on membranes that is independent of specific aspects of the amino acid sequence. Further studies of such well-behaved model peptide systems will facilitate the investigation of the general principles that govern the molecular interactions of aggregation-prone disease-associated peptides with cell and/or membrane surfaces.

Structural differences between Abeta(1-40) intermediate oligomers and fibrils elucidated by proteolytic fragmentation and hydrogen/deuterium exchange.

The aggregation of amyloid-beta protein (Abeta) in vivo is a critical pathological event in Alzheimer's disease. Although more and more evidence shows that the intermediate oligomers are the primary neurotoxic species in Alzheimer's disease, the particular structural features responsible for the toxicity of these intermediates are poorly understood. We measured the peptide level solvent accessibility of multiple Abeta(1-40) aggregated states using hydrogen exchange detected by mass spectrometry. A gradual reduction in solvent accessibility, spreading from the C-terminal region to the N-terminal region was observed with ever more aggregated states of Abeta peptide. The observed hydrogen exchange protection begins with reporter peptides 20-34 and 35-40 in low molecular weight oligomers found in fresh samples and culminates with increasing solvent protection of reporter peptide 1-16 in long time aged fibrillar species. The more solvent exposed structure of intermediate oligomers in the N-termini relative to well-developed fibrils provides a novel explanation for the structure-dependent neurotoxicity of soluble oligomers reported previously.

Two disaccharides and trimethylamine N-oxide affect Abeta aggregation differently, but all attenuate oligomer-induced membrane permeability.

Interaction between aggregates of amyloid beta protein (Abeta) and membranes has been hypothesized by many to be a key event in the mechanism of neurotoxicity associated with Alzheimer's disease (AD). Proposed membrane-related mechanisms of neurotoxicity include ion channel formation, membrane disruption, changes in membrane capacitance, and lipid membrane oxidation. Recently, osmolytes such as trehalose have been found to delay Abeta aggregation in vitro and reduce neurotoxicity. However, no direct measurements have separated the effects of osmolytes on Abeta aggregation versus membrane interactions. In this article, we tested the influence of trehalose, sucrose and trimethylamine-N-oxide (TMAO) on Abeta aggregation and fluorescent dye leakage induced by Abeta aggregates from liposomes. In the absence of lipid vesicles, trehalose and sucrose, but not TMAO, were found to delay Abeta aggregation. In contrast, all of the osmolytes significantly attenuated dye leakage. Dissolution of preformed Abeta aggregates was excluded as a possible mechanism of dye leakage attenuation by measurements of Congo red binding as well as hydrogen-deuterium exchange detected by mass spectrometry (HX-MS). However, the accelerated conversion of high order oligomers to fibril caused by vesicles did not take place if any of the three osmolytes presented. Instead, in the case of disaccharide, osmolytes were found to form adducts with Abeta, and change the dissociation dynamics of soluble oligomeric species. Both effects may have contributed to the observed osmolyte attenuation of dye leakage. These results suggest that disaccharides and TMAO may have very different effects on Abeta aggregation because of the different tendencies of the osmolytes to interact with the peptide backbone. However, the effects on Abeta membrane interaction may be due to much more general phenomena associated with osmolyte enhancement of Abeta oligomer stability and/or direct interaction of osmolyte with the membrane surface.

Structural understanding of stabilization patterns in engineered bispecific Ig-like antibody molecules.

Bispecific immunoglobulin-like antibodies capable of engaging multiple antigens represent a promising new class of therapeutic agents. Engineering of these molecules requires optimization of the molecular properties of one of the domain components. Here, we present a detailed crystallographic and computational characterization of the stabilization patterns in the lymphotoxin-beta receptor (LTbetaR) binding Fv domain of an anti-LTbetaR/anti-TNF-related apoptosis inducing ligand receptor-2 (TRAIL-R2) bispecific immunoglobulin-like antibody. We further describe a new hierarchical structure-guided approach toward engineering of antibody-like molecules to enhance their thermal and chemical stability.

Kinetic study of beta-amyloid residue accessibility using reductive alkylation and mass spectrometry.

Beta-amyloid peptide (Abeta) is the major protein constituent found in senile plaques in Alzheimer's disease (AD). It is believed that Abeta plays a role in neurodegeneration associated with AD and that its toxicity is related to its structure or aggregation state. In this study, an approach based on chemical modification of primary amines and mass spectrometric (MS) detection was used to identify residues on Abeta peptide that were exposed or buried upon changes in peptide structure associated with aggregation. Results indicate that the N terminus was the most accessible primary amine in the fibril, followed by lysine 28, then lysine 16. A kinetic analysis of the data was then performed to quantify differences in accessibility between these modification sites. We estimated apparent equilibrium unfolding constants for each modified site of the peptide, and determined that the unfolding constant for the N terminus was approximately 100 times greater than that for K28, which was about six times greater than that for K16. Understanding Abeta peptide structure at the residue level is a first step in designing novel therapies for prevention of Abeta structural transitions and/or cell interactions associated with neurotoxicity in Alzheimer's disease.

QCM-D sensitivity to protein adsorption reversibility.

Using a quartz crystal microbalance with dissipative monitoring (QCM-D) we have determined the adsorption reversibility and viscoelastic properties of ribonuclease A adsorbed to hydrophobic self-assembled monolayers. Consistent with previous work with proteins unfolding on hydrophobic surfaces, high protein solution concentrations, reduced adsorption times, and low ammonium sulfate concentrations lead to increased adsorption reversibility. Measured rigidity of the protein layers normalized for adsorbed protein amounts, a quantity we term specific dissipation, correlated with adsorption reversibility of ribonuclease A. These results suggest that specific dissipation may be correlated with changes in structure of adsorbed proteins.

Simultaneous monitoring of peptide aggregate distributions, structure, and kinetics using amide hydrogen exchange: application to Abeta(1-40) fibrillogenesis.

Increasing evidence indicates that soluble aggregates of amyloid beta protein (Abeta) are neurotoxic. However, difficulty in isolating these unstable, dynamic species impedes studies of Abeta and other aggregating peptides and proteins. In this study, hydrogen-deuterium exchange (HX) detected by mass spectrometry (MS) was used to measure Abeta(1-40) aggregate distributions without purification or modification that might alter the aggregate structure or distribution. Different peaks in the mass spectra were assigned to monomer, low molecular weight oligomer, intermediate, and fibril based on HX labeling behavior and complementary assays. After 1 h labeling, the intermediates incorporated approximately ten more deuterons relative to fibrils, indicating a more solvent exposed structure of such intermediates. HX-MS also showed that the intermediate species dissociated much more slowly to monomer than did the very low molecular weight oligomers that were formed at very early times in Abeta aggregation. Atomic force microscopy (AFM) measurements revealed the intermediates were roughly spherical with relatively homogenous diameters of 30-50 nm. Quantitative analysis of the HX mass spectra showed that the amount of intermediate species was correlated with Abeta toxicity patterns reported in a previous study under the same conditions. This study also demonstrates the potential of the HX-MS approach to characterizing complex, multi-component oligomer distributions of aggregating peptides and proteins.

Advancement in the modeling of pressure-flow for the guidance of development and scale-up of commercial-scale biopharmaceutical chromatography.

This paper details the advancements made in the modeling of open column and packed bed pressure-flow. The theoretical description is a one-dimensional elasticity model. By accounting for the loss of intra-particle porosity through empiricism, and by systematically selecting the functional form of the elastic modulus from stress-strain data, this model can accurately predict several kinds of large-scale behavior from small-scale data: packed pressure-flow, open column pressure-flow, and critical velocity. The robustness of the model has been demonstrated for MabSelect, SP 650M, Butyl Sepharose 4 FF and several other agarose-based and polymethacrylate-based resins. The predicted critical velocities are on average within +/-5% of observations. A simple modification to the Blake-Kozeny permeability expression allows accurate prediction of packed bed pressure-flow explicitly from compression factor, packed bed height, and settled bed inter-particle porosity. The model provides limits on mobile phase velocity and on operating pressure-flow as a function of bed height, particle size, and resin rigidity, and allows exploration of commercial manufacturing scenarios to identify scalable process time and cycle number.

Role of aggregation conditions in structure, stability, and toxicity of intermediates in the Abeta fibril formation pathway.

beta-amyloid peptide (Abeta) is one of the main protein components of senile plaques associated with Alzheimer's disease (AD). Abeta readily aggregates to forms fibrils and other aggregated species that have been shown to be toxic in a number of studies. In particular, soluble oligomeric forms are closely related to neurotoxicity. However, the relationship between neurotoxicity and the size of Abeta aggregates or oligomers is still under investigation. In this article, we show that different Abeta incubation conditions in vitro can affect the rate of Abeta fibril formation, the conformation and stability of intermediates in the aggregation pathway, and toxicity of aggregated species formed. When gently agitated, Abeta aggregates faster than Abeta prepared under quiescent conditions, forming fibrils. The morphology of fibrils formed at the end of aggregation with or without agitation, as observed in electron micrographs, is somewhat different. Interestingly, intermediates or oligomers formed during Abeta aggregation differ greatly under agitated and quiescent conditions. Unfolding studies in guanidine hydrochloride indicate that fibrils formed under quiescent conditions are more stable to unfolding in detergent than aggregation associated oligomers or Abeta fibrils formed with agitation. In addition, Abeta fibrils formed under quiescent conditions were less toxic to differentiated SH-SY5Y cells than the Abeta aggregation associated oligomers or fibrils formed with agitation. These results highlight differences between Abeta aggregation intermediates formed under different conditions and provide insight into the structure and stability of toxic Abeta oligomers.

Generalizing a two-conformation model for describing salt and temperature effects on protein retention and stability in hydrophobic interaction chromatography.

A two-conformation adsorption model that includes the effects of salt concentration and temperature on both stability and adsorption has been developed to describe the effects of secondary protein unfolding on hydrophobic interaction chromatography (HIC). The model has been applied to a biotech protein and to beta-lactoglobulin on Phenyl Sepharose 6FF low sub HIC media. Thermodynamic property models for adsorption and protein stability with parameters obtained from experimental chromatographic data successfully describe observed chromatographic behavior over ranges of temperature and salt concentration, provide predictions of distribution among different conformers, and give a basis for calculating trends in retention strength and stability with changing conditions, that might prove useful in HIC process development.

Loading, stationary phase, and salt effects during hydrophobic interaction chromatography: alpha-lactalbumin is stabilized at high loadings.

Amide hydrogen-deuterium exchange labeling has been used to study the effects of salt and protein loading on alpha-lactalbumin (BLA) stability during hydrophobic interaction chromatography (HIC). Stability in the adsorbed phase increased dramatically with increasing loading, and unfolding was nearly undetectable close to the resin saturation capacity. We also found that a butyl surface destabilized BLA more than a phenyl surface, despite the fact that BLA was bound more strongly on the phenyl surface. These observations have important implications for HIC process design and indicate that in some cases column capacity does not have to be sacrificed to preserve protein stability.

Simulation and experiment of temperature and cosolvent effects in reversed phase chromatography of peptides.

Experiments and simulations have been carried out for several polar protected peptides in reversed phase chromatography in order to demonstrate how simulation can describe the effects of varying temperature and cosolvent fraction. Comparisons of adsorption chemical potentials from mesoscopic simulations and experimental chromatographic retention data show very good agreement with only one temperature-independent solvent parameter from a single peptide. Such simulations should help guide the design of chromatography experiments with biomolecules and predict retention, including conditions for which empirical correlations such as hydrophobicity scales and molecular descriptors have not been developed.

Structural features of interferon-gamma aggregation revealed by hydrogen exchange.

Using hydrogen-deuterium exchange (HX) and electrospray ionization mass spectrometry, we have investigated the stability and structural changes of recombinant human interferon-gamma (IFN-gamma) during aggregation induced by guanidine hydrochloride (GdnHCl) and potassium thiocyanate. First, HX labeling was initiated after the amorphous aggregates were formed to probe the tertiary structure of the aggregated state. Second, labeling was performed at low protein concentrations to assess stability under aggregation prone conditions. In 1 M GdnHCl, the stability of IFN-gamma was greatly reduced and much less protection from HX in solution was observed. Exchange under these conditions was slower in helix C than in the rest of the protein. Aggregates formed in 1 M GdnHCl showed a HX pattern consistent with a partially unfolded state with an intact helix C. Although aggregates formed in 0.3 M KSCN exhibited a HX pattern similar to those formed in GdnHCl, the solution phase HX pattern in 0.3 M KSCN was surprisingly comparable to that of the native state. Varying the aggregation time before performing HX revealed that KSCN first precipitated native protein and then facilitated partial unfolding of the precipitated protein. These results show that helix C, which forms the hydrophobic core of the IFN-gamma dimer, is highly protected from HX under native conditions, is more stable in GdnHCl than the rest of the protein and remains intact in both GdnHCl- and KSCN-induced aggregates. This suggests that native-state HX patterns may presage regions of the protein susceptible to unfolding during aggregation.

Aprotinin conformational distributions during reversed-phase liquid chromatography. Analysis by hydrogen-exchange mass spectrometry.

Hydrogen-exchange mass spectrometry analysis of the stable protein aprotinin during reversed-phase liquid chromatography shows both native and unfolded protein. The behavior is consistent with only two conformational states, a near-native state and a fully solvent-accessible state, with reversible interchange of species within and between the mobile and stationary phases. The amount of unfolded form is greater on C18 relative to C4 alkyl modified silica surfaces. The addition of (NH4)2SO4, Na2SO4, NaCl, or NaSCN to the mobile phase stabilized native conformation on the chromatographic surface, especially on the C4 media. Finally, the retention and the proportion of denatured form increases with added salts in anorder consistent with the lyotropic series, but reversed from that observed for small molecules.