Seven-Coordinate Tb3+ Complexes with 90% Quantum Yields: High-Performance Examples of Combined Singlet- and Triplet-to-Tb3+ Energy-Transfer Pathways.

Seven-coordinate, pentagonal-bipyramidal (PBP) complexes [Ln(bbpen)Cl] and [Ln(bbppn)Cl], in which Ln = Tb3+ (products I and II), Eu3+ (III and IV), and Gd3+ (V and VI), with bbpen2- = N,N'-bis(2-oxidobenzyl)-N,N'-bis(pyridin-2-ylmethyl)ethylenediamine and bbppn2- = N,N'-bis(2-oxidobenzyl)-N,N'-bis(pyridin-2-ylmethyl)-1,2-propanediamine, were synthesized and characterized by single-crystal X-ray diffraction analysis, alternating-current magnetic susceptibility measurements, and photoluminescence (steady-state and time-resolved) spectroscopy. Under a static magnetic field of 0.1 T, the Tb3+ complexes I and II revealed single-ion-magnet behavior. Also, upon excitation at 320 nm at 300 K, I and II presented very high absolute emission quantum yields (0.90 ± 0.09 and 0.92 ± 0.09, respectively), while the corresponding Eu3+ complexes III and IV showed no photoluminescence. Detailed theoretical calculations on the intramolecular energy-transfer rates for the Tb3+ products indicated that both singlet and triplet ligand excited states contribute efficiently to the overall emission performance. The expressive quantum yields, QLnL, measured for I and II in the solid state and a dichloromethane solution depend on the excitation wavelength, being higher at 320 nm. Such a dependence was rationalized by computing the intersystem crossing rates (WISC) and singlet fluorescence lifetimes (τS) related to the population dynamics of the S1 and T1 levels. Thin films of product II showed high air stability and photostability upon continuous UV illumination, which allowed their use as downshifting layers in a green light-emitting device (LED). The prototypes presented a luminous efficacy comparable with those found in commercial LED coatings, without requiring encapsulation or dispersion of II in host matrixes. The results indicate that the PBP environment determined by the ethylenediamine (en)-based ligands investigated in this work favors the outstanding optical properties in Tb3+ complexes. This work presents a comprehensive structural, chemical, and spectroscopic characterization of two Tb3+ complexes of mixed-donor, en-based ligands, focusing on their outstanding optical properties. They constitute good molecular examples in which both triplet and singlet excited states provide energy to the Tb3+ ion and lead to high values of QLnL.

Promoting a Significant Increase in the Photoluminescence Quantum Yield of Terbium(III) Complexes by Ligand Modification.

Two discrete mononuclear complexes, [Tb(bbpen)(NO3)] (I) and [Tb(bbppn)(NO3)] (II), for which H2bbpen = N,N'-bis(2-hydroxybenzyl)-N,N'-bis(pyridin-2-ylmethyl)ethylenediamine and H2bbppn = N,N'-bis(2-hydroxylbenzyl)-N,N'-bis(pyridin-2-ylmethyl)-1,2-propanediamine, were synthesized and characterized by FTIR, Raman, and photoluminescence (PL, steady-state and time-resolved modes) spectroscopy. The attachment of a methyl group to the ethylenediamine portion of the ligand backbone differentiates II from I and acts as a determining feature to both the structural and optical properties of the former. The single-crystal X-ray structure of H2bbppn is described here for the first time, while that of complex II has been redetermined in the monoclinic C2 space group in light of new diffraction data. In II, selective crystallization leads to spontaneous resolution of enantiomeric molecules in different crystals. Absolute emission quantum yields (ϕ) and luminescence excited-state lifetimes (at room temperature and 11 K) were measured for both complexes. Despite their similar molecular structures, I and II exhibit remarkably different ϕ values of 21 ± 2% and 67 ± 7%, respectively, under UV excitation at room temperature. Results of quantum-mechanical (DFT and TD-DFT) calculations and experimental PL measurements also performed for H2bbpen and H2bbppn confirmed that both ligands are suitable to work as "antennas" for TbIII. Considering the 5D4 lifetime profiles and the significantly higher absolute quantum yield of II, it appears that thermally active nonradiative pathways present in I are minimized in II due to differences in the conformation of the ethylenediamine bridge.

Infrared and Raman spectroscopy of non-conventional hydrogen bonding between N,N'-disubstituted urea and thiourea groups: a combined experimental and theoretical investigation.

The variety of H bond (HB) interactions is a source of inspiration for bottom-up molecular engineering through self-aggregation. Non-conventional intermolecular HBs between N,N'-disubstituted urea and thiourea are studied in detail by vibrational spectroscopies and ab initio calculations. Raman and IR mode assignments are given. We show that it is possible to study selectively the different intermolecular bifurcated intra- and inter-dimer HBs with the two types of HB acceptors. Through the ab initio calculation, the thioamide I mode, a specific marker of N-HS[double bond, length as m-dash]C HB interactions, is unambiguously identified.

Surface crystallization of ionic liquid crystals.

The evidence for surface crystallization in ionic liquids is scarce. The existing reports seem to be contradictory as for its driving forces, since in the two compounds investigated in the literature, the contribution of coloumbic and van der Waals forces is very different. In this work 1-dodecyl-3-methylimidazolium tetrafluoroborate was studied and its surface crystallization characterized by surface tension, ellipsometry and optical microscopy. The results obtained seem to reconcile previous observations, and it was further shown, using the same techniques, that this phenomenon is prevalent in other ionic liquids. MD simulation results illustrate the different possibilities of organization, providing reasonable models to rationalize the experimental observations.

Integrated Optical Mach-Zehnder Interferometer Based on Organic-Inorganic Hybrids for Photonics-on-a-Chip Biosensing Applications.

The development of portable low-cost integrated optics-based biosensors for photonics-on-a-chip devices for real-time diagnosis are of great interest, offering significant advantages over current analytical methods. We report the fabrication and characterization of an optical sensor based on a Mach-Zehnder interferometer to monitor the growing concentration of bacteria in a liquid medium. The device pattern was imprinted on transparent self-patternable organic-inorganic di-ureasil hybrid films by direct UV-laser, reducing the complexity and cost production compared with lithographic techniques or three-dimensional (3D) patterning using femtosecond lasers. The sensor performance was evaluated using, as an illustrative example, E. coli cell growth in an aqueous medium. The measured sensitivity (2 × 10-4 RIU) and limit of detection (LOD = 2 × 10-4) are among the best values known for low-refractive index contrast sensors. Furthermore, the di-ureasil hybrid used to produce this biosensor has additional advantages, such as mechanical flexibility, thermal stability, and low insertion losses due to fiber-device refractive index mismatch (~1.49). Therefore, the proposed sensor constitutes a direct, compact, fast, and cost-effective solution for monitoring the concentration of lived-cells.

Dual-Property Supramolecular H-Bonded 15-Crown-5 Ln(III) Chains: Joint Magneto-Luminescence and ab Initio Studies.

Two complexes comprising 9-coordinate capped square antiprismatic [Ln(NO3)3(OH2)2(MeOH)] units [Ln(III) = Dy 6; Tb 7] are reported in which the metal complexes are hydrogen-bonded to 15C5 (15-crown-5) macrocycles to form supramolecular chains, {[Ln(NO3)3(OH2)2(MeOH)]·(15C5)}n. Alternating current magnetic susceptibility measurements supported by ab initio studies show field-induced SMM (single-molecule magnet) behavior for 6, but rapid relaxation of the magnetization for 7 because of the presence of dominant quantum tunneling processes as evidenced by the presence of a significant calculated tunnel splitting within the ground-state multiplet. Modeling the high-resolution emission spectra for 6 afforded energies of 37 ± 5 and 28 ± 5 cm-1 for the first-excited-state Stark sublevels of the two crystallographically independent Dy1 and Dy2 ions, in excellent agreement with the calculated values of 31 and 21 cm-1 for ΔE1 derived from ab initio studies.

Influence of the surface termination on the light emission of crystalline silicon nanoparticles.

The light emission properties of silicon crystalline nanoparticles (SiNPs) have been investigated using steady-state and time-resolved photoluminescence measurements carried out at 12 K and at room temperature. To enable a comparative study of the role of surface terminal groups on the optical properties, we investigated SiNPs-H ensembles with the same mean NP diameter but differing on the surface termination, namely organic-functionalized with 1-dodecene (SiNPs-C12) and H-terminated (SiNPs-H). We show that although the spectral dependence of the light emission is rather unaffected by surface termination, characterized by a single broad band peaking at ∼1.64 eV, both the exciton recombination lifetimes and quantum yields display a pronounced dependence on the surface termination. Exciton lifetimes and quantum yields are found to be significantly lower in SiNPs-H compared SiNPs-C12. This difference is due to distinct non-radiative recombination probabilities resulting from inter-NP exciton migration, which in SiNPs-C12 is inhibited by the energy barriers imposed by the bulky surface groups. The surface groups of organic-terminated SiPs are responsible for the inhibition of inter-NP exciton transfer, yielding a higher quantum yield compared to SiNPs-H. The surface oxidation of SiNPs-C12 leads to the appearance of a phenomenon of an exciton transference from to the Si core to oxide-related states that contribute to light emission. These excitons recombine radiatively, explaining why the emission quantum of the organic-terminated SiNPs is the same after surface oxidation of SiNPs-C12.

Easily processable multimodal spectral converters based on metal oxide/organic-inorganic hybrid nanocomposites.

This manuscript reports the synthesis and characterization of the first organic-inorganic hybrid material exhibiting efficient multimodal spectral converting properties. The nanocomposite, made of Er(3+), Yb(3+) codoped zirconia nanoparticles (NPs) entrapped in a di-ureasil d-U(600) hybrid matrix, is prepared by an easy two-step sol-gel synthesis leading to homogeneous and transparent materials that can be very easily processed as monolith or film. Extensive structural characterization reveals that zirconia nanocrystals of 10-20 nm in size are efficiently dispersed into the hybrid matrix and that the local structure of the di-ureasil is not affected by the presence of the NPs. A significant enhancement in the refractive index of the di-ureasil matrix with the incorporation of the ZrO2 nanocrystals is observed. The optical study demonstrates that luminescent properties of both constituents are perfectly preserved in the final hybrid. Thus, the material displays a white-light photoluminescence from the di-ureasil component upon excitation at UV/visible radiation and also intense green and red emissions from the Er(3+)- and Yb(3+)-doped NPs after NIR excitation. The dynamics of the optical processes were also studied as a function of the lanthanide content and the thickness of the films. Our results indicate that these luminescent hybrids represent a low-cost, environmentally friendly, size-controlled, easily processed and chemically stable alternative material to be used in light harvesting devices such as luminescent solar concentrators, optical fibres and sensors. Furthermore, this synthetic approach can be extended to a wide variety of luminescent NPs entrapped in hybrid matrices, thus leading to multifunctional and versatile materials for efficient tuneable nonlinear optical nanodevices.

A high-temperature molecular ferroelectric Zn/Dy complex exhibiting single-ion-magnet behavior and lanthanide luminescence.

Multifunctional molecular ferroelectrics are exciting materials synthesized using molecular chemistry concepts, which may combine a spontaneous electrical polarization, switched upon applying an electric field, with another physical property. A high-temperature ferroelectric material is presented that is based on a chiral Zn(2+) /Dy(3+) complex exhibiting Dy(3+) luminescence, optical activity, and magnetism. We investigate the correlations between the electric polarization and the crystal structure as well as between the low-temperature magnetic slow relaxation and the optical properties.

A comprehensive dataset of photonic features on spectral converters for energy harvesting.

Building integrated photovoltaics is a promising strategy for solar technology, in which luminescent solar concentrators (LSCs) stand out. Challenges include the development of materials for sunlight harvesting and conversion, which is an iterative optimization process with several steps: synthesis, processing, and structural and optical characterizations before considering the energy generation figures of merit that requires a prototype fabrication. Thus, simulation models provide a valuable, cost-effective, and time-efficient alternative to experimental implementations, enabling researchers to gain valuable insights for informed decisions. We conducted a literature review on LSCs over the past 47 years from the Web of ScienceTM Core Collection, including published research conducted by our research group, to gather the optical features and identify the material classes that contribute to the performance. The dataset can be further expanded systematically offering a valuable resource for decision-making tools for device design without extensive experimental measurements.

Refined structural studies on the fluorite-related polymorphs of sol-gel undoped and Eu3+-doped yttrium tantalates.

Compounds with the general formula RE3MO7 (RE = rare earth ions; M = Ta, Nb, Sb, Ru, Ir, Os, Re, etc.), crystallize as a fluorite-related structure, forming polymorphs with different space groups. The space group strongly depends on the RE3+ and M5+ ionic radii and processing conditions. Structural characterization is well-established for the lanthanide series, but literature studies have divergent views about how to attribute yttrium tantalate (Y3TaO7) space groups-some authors have described the Y3TaO7 structure as orthorhombic and belonging to space group C2221 or Ccmm, whereas others have assigned a cubic Fm3̄m structure to it. Here, we have characterized the structure of undoped and Eu3+-doped Y3TaO7 (0.1 to 50 mol% of Eu3+) samples synthesized by the sol-gel method that crystallized as a cubic disordered fluorite-type structure, space group Fm3̄m. Their powder X-ray diffraction measurements, Rietveld analyzes and Raman spectra were used as a conclusive technique of the structural properties. We have also investigated whether a secondary phase (M'-YTaO4) emerged in the samples and compared the phase composition of each sample to their Raman spectra. Low-temperature photoluminescence measurements (∼15 K) using Eu3+ as a structural probe helped us analyze the inhomogeneous broadening observed in the emission spectra. These measurements can be used as an important tool to attribute the crystalline phases of rare earth tantalates and niobates.

Predicting the efficiency of luminescent solar concentrators for solar energy harvesting using machine learning.

Building-integrated photovoltaics (BIPV) is an emerging technology in the solar energy field. It involves using luminescent solar concentrators to convert traditional windows into energy generators by utilizing light harvesting and conversion materials. This study investigates the application of machine learning (ML) to advance the fundamental understanding of optical material design. By leveraging accessible photoluminescent measurements, ML models estimate optical properties, streamlining the process of developing novel materials, offering a cost-effective and efficient alternative to traditional methods, and facilitating the selection of competitive materials. Regression and clustering methods were used to estimate the optical conversion efficiency and power conversion efficiency. The regression models achieved a Mean Absolute Error (MAE) of 10%, which demonstrates accuracy within a 10% range of possible values. Both regression and clustering models showed high agreement, with a minimal MAE of 7%, highlighting the efficacy of ML in predicting optical properties of luminescent materials for BIPV.

Thermal properties of nanofluids using hydrophilic and hydrophobic LiYF4:Yb/Er upconverting nanoparticles.

Luminescent nanoparticles have shown great potential for thermal sensing in bio-applications. Nonetheless, these materials lack water dispersibility that can be overcome by modifying their surface properties with water dispersible molecules such as cysteine. Herein, we employ LiYF4:Er3+/Yb3+ upconverting nanoparticles (UCNPs) capped with oleate or modified with cysteine dispersed in cyclohexane or in water, respectively, as thermal probes. Upconversion emission was used to sense temperature with a relative thermal sensitivity of ∼1.24% K-1 (at 300 K) and a temperature uncertainty of 0.8 K for the oleate capped and of 0.5 K for cysteine modified NPs. To study the effect of the cysteine modification in the heat transfer processes, the thermal conductivity of the nanofluids was determined, yielding 0.123(6) W m-1 K-1 for the oleate capped UCNPs dispersed in cyclohexane and 0.50(7) W m-1 K-1 for the cysteine modified UCNPs dispersed in water. Moreover, through the heating curves, the nanofluids' thermal resistances were estimated, showing that the cysteine modification partially prevents heat transfer.

Correction: Carbon dots on LAPONITE® hybrid nanocomposites: solid-state emission and inter-aggregate energy transfer.

Correction for 'Carbon dots on LAPONITE® hybrid nanocomposites: solid-state emission and inter-aggregate energy transfer' by Bruno S. D. Onishi et al., Nanoscale, 2024, https://doi.org/10.1039/d3nr06336d.

Carbon dots on LAPONITE® hybrid nanocomposites: solid-state emission and inter-aggregate energy transfer.

This study delves into the photoluminescent characteristics of solid-state hybrid carbon dots/LAPONITE® (CDLP). These hybrid materials were synthesized using the hydrothermal method with a precise pH control set at 8.5. The LAPONITE® structure remains intact without structural collapse, and we detected the possible deposition of carbon dots (CDs) aggregates on the clay mineral's edges. The use of different concentrations of citric acid (10-, 6-, 2- and 1-times weight/weight of LAPONITE® mass, maintaining the 1 : 1 molar ratio with ethylenediamine) during synthesis results in different CDs concentrations in CDLP-A (low precursors concentration) and CDLP-D (high concentration) with an amorphous structure and average size around 2.8-3.0 nm. The CDLP displayed visible photoluminescence emission in aqueous and powder, which the last underwent quenching according to lifetimes and quantum yield measurements. Low-temperature measurements revealed an enhancement of the non-radiative pathways induced by aggregation. Energy transfer modelling based on Förster-Dexter suggests an approximate mean distance of 9.5 nm between clusters of CDs.

Lanthanide-based logic: a venture for the future of molecular computing.

Managing the continuous and fast-growing volume of information, the progress in the Internet-of-Things, and the evolution from digitalization to networking are huge technological chores. Si-based integrated chips face increasing demands as they strive to meet these challenges. However, there is growing recognition that information processing and computing based on molecules performing logic operations may play a decisive role in shaping the future of the computer industry. Molecular logic gates are molecular counterparts of electronic devices that, instead of exclusively by electrical signals, can be stimulated by diverse chemical or physical input signals that produce optical outputs according to a well-defined logical transfer function. Several materials have been applied for molecular logic, however, the Ln3+-based ones appear to be a commendable choice, as they can respond to both chemical and physical stimuli, presenting unique photophysical properties that make them quite popular for photonics applications. Here we critically review illustrative molecular logic systems based on Ln3+ ions and discuss their potential for integration in future molecular photonic-electronic hybrid logic computing systems.

Exploring the intra-4f and the bright white light upconversion emissions of Gd2O3:Yb3+,Er3+-based materials for thermometry.

Upconversion broadband white light emission driven by low-power near-infrared (NIR) lasers has been reported for many materials, but the mechanisms and effects related to this phenomenon remain unclear. Herein, we investigate the origin of laser-induced continuous white light emission in synthesized nanoparticles (Gd0.89Yb0.10Er0.01)2O3 and a mechanical mixture of commercial oxides with the same composition 89% Gd2O3, 10% Yb2O3, and 1% Er2O3. We report their photophysical features with respect to sample compactness, laser irradiation (wavelength, power density, excitation cycles), pressure, temperature, and temporal dynamics. Despite the sensitizer (Yb3+) and activator (Er3+) being in different particles for the mechanical mixture, efficient discrete and continuous upconversion emissions were observed. Furthermore, the synthesized nanoparticles were developed as primary luminescent thermometers (upon excitation at NIR) in the 299-363 K range, using the Er3+ upconversion 2H11/2 → 4I15/2/4S3/2 → 4I15/2 intensity ratio. They were also operating as secondary ones in the 1949-3086 K, based on the blackbody distribution of the observed white light emission. Our findings provide important insights into the mechanisms and effects related to the transition from discrete to continuous upconversion emissions with potential applications in remote temperature sensing.

An autonomous power temperature sensor based on window-integrated transparent PV using sustainable luminescent carbon dots.

The energy efficiency of buildings can be significantly improved through the use of renewable energy sources. Luminescent solar concentrators (LSCs) appear to be a solution for integrating photovoltaic (PV) devices into the structure of buildings (windows, for instance) to enable low-voltage devices to be powered. Here, we present transparent planar and cylindrical LSCs based on carbon dots in an aqueous solution and dispersed in organic-inorganic hybrid matrices, which present photoluminescent quantum yield values up to 82%, facilitating an effective solar photon conversion. These LSCs showed the potencial for being incorporated as building windows due to an average light transmittance of up to ∼91% and color rendering index of up to 97, with optical and power conversion efficiency values of 5.4 ± 0.1% and 0.18 ± 0.01%, respectively. In addition, the fabricated devices showed temperature sensing ability enabling the fabrication of an autonomous power mobile temperature sensor. Two independent thermometric parameters were established based on the emission and the electrical power generated by the LSC-PV system, which could both be accessed by a mobile phone, enabling mobile optical sensing through multiparametric thermal reading with relative sensitivity values up to 1.0% °C-1, making real-time mobile temperature sensing accessible to all users.

Dependence of the lifetime upon the excitation energy and intramolecular energy transfer rates: the 5D0Eu(III) emission case.

In many Eu(III)-based materials, the presence of an intermediate energy level, such as ligand-to-metal charge transfer (LMCT) states or defects, that mediates the energy transfer mechanisms can strongly affect the lifetime of the (5)D(0) state, mainly at near-resonance (large transfer rates). We present results for the dependence of the (5)D(0) lifetime on the excitation wavelength for a wide class of Eu(III)-based compounds: ionic salts, polyoxometalates (POMs), core/shell inorganic nanoparticles (NPs) and nanotubes, coordination polymers, ß-diketonate complexes, organic-inorganic hybrids, macro-mesocellular foams, functionalized mesoporous silica, and layered double hydroxides (LDHs). This yet unexplained behavior is successfully modelled by a coupled set of rate equations with seven states, in which the wavelength dependence is simulated by varying the intramolecular energy transfer rates. In addition, the simulations of the rate equations for four- and three-level systems show a strong dependence of the emission lifetime upon the excitation wavelength if near-resonant non-radiative energy transfer processes are present, indicating that the proposed scheme can be generalized to other trivalent lanthanide ions, as observed for Tb(III)/Ce(III). Finally, the proper use of lifetime definition in the presence of energy transfer is emphasized.

Metal-free highly luminescent silica nanoparticles.

Stable, cost-effective, brightly luminescent, and metal-free organosilica nanoparticles (NPs) were prepared using the Stöber method without any thermal treatment above 318 K. The white-light photoluminescence results from a convolution of the emission originated in the NH(2) groups of the organosilane and oxygen defects in the silica network. The time-resolved emission spectra are red-shifted, relative to those acquired in the steady-state regime, pointing out that the NPs emission is governed by donor-acceptor (D-A) recombination mechanisms. Moreover, the increase of the corresponding lifetime values with the monitored wavelength further supports that the emission is governed by a recombination mechanism typical of a D-A pair attributed to an exceptionally broad inhomogeneous distribution of the emitting centers peculiar to silica-based NPs. These NPs exhibit the highest emission quantum yield value (0.15 ± 0.02) reported so far for organosilica biolabels without activator metals. Moreover, the emission spectra and the quantum yield values are quite stable over time showing no significant aging effects after exposure to the ambient environment for more than 1 year, stressing the potential of these NPs as metal-free biolabels.