RESUMO
As a specialty board, the American Board of Orthodontics (ABO) serves to protect the public and the orthodontic specialty by certifying orthodontists. The demonstration of commitment to lifelong learning and self-improvement is critical to achieving the highest level of patient care. The ABO completed a practice analysis study in 2023 to ensure all examinations represent current assessments of proficiency in orthodontics at a level of quality that satisfies professional expectations. The practice analysis is essential to providing a demonstrable relationship between the examination content and orthodontic practice and provides a critical foundation for ABO's examination programs.
Assuntos
Ortodontia , Humanos , Estados Unidos , Conselhos de Especialidade Profissional , Ortodontistas , Assistência OdontológicaRESUMO
BACKGROUND: Retention has been always considered a major challenge in orthodontics. Recently computer-aided design/computer-aided manufacturing (CAD/CAM) fixed retainers (FRs) have been introduced as a marked development in retainer technology, offering potential advantages. OBJECTIVE: The objective of this study was to compare the differences in relapse and failure rates in patients treated with FRs using CAD/CAM technology, lab-based technique, and chairside method. TRIAL DESIGN: A double-blinded, prospective, randomized controlled clinical trial was conducted over a 2-year period at a single centre. INTERVENTIONS: These patients were divided into three groups: CAD/CAM group with multistranded Stainless Steel wires (CAD/CAM, nâ =â 14), lab group with the same multistranded wires (lab, nâ =â 15), and a chairside group with Stainless Steel Ortho-FlexTech wires (chairside, nâ =â 14). OUTCOMES: Inter-canine width (ICW) and Little's irregularity index were digitally measured from scans at the orthodontic debonding (T1), 6-month retention (T2), 1-year retention (T3), and 2-year retention (T4) visits. All forms of failure were documented and analyzed. RANDOMIZATION: Participants were randomly assigned to the three groups using online randomization software (randomization.com) by a statistician who was not involved in the study. BLINDING: Patients were blinded in terms of the FR group to which they were each randomly assigned. The principal investigator was blinded upon data analysis since patients' records were coded to minimize observer and measurement bias. RESULTS: Initially 81 patients were assessed for eligibility. Seventy-five patients were randomly allocated into the three study groups. After 2-year follow-up, 43 patients came back for the follow-up and were analyzed. The CAD/CAM group showed significantly less reduction in ICW compared to the chairside group at all time intervals (Pâ <â .05) and compared to the lab group at 6 months (Pâ =â .038). In terms of LII, the CAD/CAM group exhibited significantly less change than the chairside and lab groups at all time intervals (Pâ <â .05). The CAD/CAM group had the lowest failure rate (21.4%), followed by chairside group (28.6%) and then lab group (33.3%), however the differences were insignificant. No harms were observed in the current study. CONCLUSION: Within 2 years of fixed retention, CAD/CAM FRs showed significantly less relapse than lab-based and chairside FRs. However, there was no significant difference in failure rates among the groups. TRIAL REGISTRATION: NCT05915273.
Assuntos
Desenho de Aparelho Ortodôntico , Aço Inoxidável , Humanos , Seguimentos , Estudos Prospectivos , Contenções Ortodônticas , Aparelhos Ortodônticos Fixos , RecidivaRESUMO
OBJECTIVES: The aim of this investigation was to evaluate whether Class II malocclusion in adult patients can be successfully corrected using a completely customized lingual appliance (CCLA) in combination with Class II elastics. METHODS: In order to detect differences in the final treatment outcome, two groups were matched for age and gender. Treatment results of 40 adult orthodontic patients with a Class I malocclusion (Group 1) were compared to 40 adults with a Class II malocclusion (Group 2). All patients had completed treatment with a CCLA (WIN, DW Lingual Systems, Bad Essen, Germany) without known centric occlusion-centric relation discrepancies, issues of compliance, or overcorrection in the individual treatment plan which was defined by a target set-up. In order to compare the treatment results of the two groups, 7 measurements using the American Board of Orthodontics Model Grading System (ABO MGS) and linear measurements for anterior-posterior (AP) and vertical dimensions were assessed at the start of lingual treatment (T1), after debonding (T2B) and compared to the individual target set-up (T2A). RESULTS: A statistically significant AP correction was achieved in Group 2 which represented 95% of the planned amount. The planned overbite correction was fully achieved in the Class I and Class II group. In both groups, there was a statistically significant improvement in the ABO scores, with no significant difference between the two groups at T2. 100% of the patients in Group 2 and 92.5% in Group 1 would meet the ABO standards after CCLA treatment. LIMITATIONS: The main limitation of this study is that only patients who were wearing the elastics as prescribed were retrospectively included. Therefore, the results of this study may have limited generalizability. CONCLUSIONS: Completely customized lingual appliances in combination with Class II elastics can correct a Class II malocclusion successfully in adult patients. The final treatment outcome can be of a similar high quality in Class I and Class II patients.
Assuntos
Má Oclusão Classe II de Angle , Má Oclusão Classe I de Angle , Desenho de Aparelho Ortodôntico , Humanos , Má Oclusão Classe II de Angle/terapia , Masculino , Feminino , Adulto , Resultado do Tratamento , Má Oclusão Classe I de Angle/terapia , Adulto Jovem , Cefalometria , Dimensão Vertical , Técnicas de Movimentação Dentária/instrumentação , Técnicas de Movimentação Dentária/métodos , Braquetes Ortodônticos , Estudos RetrospectivosRESUMO
INTRODUCTION: The anterior and overall Bolton ratios and their application in orthodontics are widely known. However, little has been reported about the posterior Bolton ratio, how it is affected by the extraction of posterior teeth, and its application in orthodontic treatment planning. This study aimed to investigate how extracting maxillary first and mandibular second premolars affects the posterior Bolton ratio. METHODS: The sample included 55 patients with Class I occlusion within 1 standard deviation of ideal anterior and overall Bolton ratios. The digitized models were subjected to virtual extraction of maxillary first premolars and mandibular second premolars and setup of posterior teeth in ideal occlusion. If space closure compromised occlusion, the teeth were moved to achieve ideal cusp-fossa or cusp-marginal ridge occlusion. The ideal setups were measured for residual interproximal spacing. Statistical analysis used R statistical software (version 2018; R Core Team, Vienna, Austria). RESULTS: The ideal nonextraction posterior Bolton ratio was determined from the sample to be 105.77 ± 1.99%. The ideal expected posterior Bolton ratio for maxillary first and mandibular second premolar extraction patients was 106.52 ± 2.52%. This significantly differed from the expected posterior Bolton ratio for the 4 first premolar extractions. Patients finished with an average of 1.28 mm net residual spacing between mandibular first premolars and first molars; 38.2% of patients finished with at least 1.5 mm of residual space, and 9.1% of patients finished with at least 2 mm of residual space. CONCLUSIONS: A patient with ideal anterior, posterior, and overall Bolton ratios treated with maxillary first and mandibular second premolar extractions to ideal occlusion will likely finish with some spacing in the mandibular dentition.
Assuntos
Mandíbula , Dente Molar , Humanos , Dente Pré-Molar/cirurgia , Maxila , Oclusão Dentária , Extração DentáriaRESUMO
INTRODUCTION: Overall and anterior Bolton ratios have been well covered in the orthodontic literature; however, little has been reported on posterior Bolton ratios. Considering the frequency of premolar extractions in the specialty, it would be relevant to know how the posterior occlusion is affected by premolar extractions. This study aimed to investigate how the posterior Bolton ratio is affected by the extraction of the 4 first premolars. METHODS: Fifty-five patients with Class I occlusion within 1 standard deviation of ideal anterior and overall Bolton ratios models were selected and digitized. Tooth widths were measured. Virtual extractions of 4 first premolars were performed, and a digital setup of anterior and remaining posterior teeth observing ideal occlusion relationships was executed. When space closure compromised the occlusion, preference was given to the latter. Residual interproximal spacing was digitally measured on the setups. Analysis of variance and linear regression tests were used to identify factors contributing to interproximal spacing. RESULTS: An average of 1.1 mm of net residual spacing between mandibular second premolars and first molars was observed. In 27% of the sample, at least 1.5 mm of residual space was found. In addition, 16% showed at least 2 mm of residual space. The ratio of the maxillary second premolars to the mandibular second premolars and the width of the maxillary second premolars best explain residual space (r = 0.554; r2 = 0.307). A regression equation for predicting residual space is offered. CONCLUSIONS: Ideal anterior, posterior, and overall Bolton ratios treated with extraction of 4 first premolars and ideal occlusion will likely finish with some spacing in the mandible.
Assuntos
Má Oclusão , Mandíbula , Dente Pré-Molar/cirurgia , Oclusão Dentária , Humanos , Mandíbula/cirurgia , Maxila , OdontometriaRESUMO
INTRODUCTION: This research aimed to determine whether Class II malocclusion can be treated with clear aligners after completing treatment with the initial set of aligners. METHODS: A sample of 80 adult patients were divided into Group 1 with Class I molar malocclusions (n = 40 [11 men and 29 women]; 38.70 ± 15.90 years) and Group 2 with Class II molar malocclusions (n = 40 [11 men and 29 women]; 35.25 ± 15.21 years). All patients had finished treatment with the initial set of Invisalign aligners (Align Technology, Santa Jose, Calif) without known centric occlusion-centric relation discrepancies, issues of compliance, or overcorrection. The 7 measurements using the American Board of Orthodontics (ABO) Model Grading System and millimetric measurements for anteroposterior (AP) and vertical dimensions were assessed and compared between the 2 groups at pretreatment, posttreatment ClinCheck (Align Technology) prediction, and posttreatment. RESULTS: No improvements were observed in the AP correction. The amount of AP correction in patients with Class II malocclusion was 6.8% of the predicted amount. The amount of overbite correction achieved was 28.8% and 38.9% of the predicted amounts in patients with Class I and Class II malocclusion, respectively. Significant improvements in alignment and interproximal contact scores were observed, with only slight improvements in total ABO scores. An increase in mean occlusal contacts score was observed after treatment. No patient with Class II malocclusions would meet the ABO standards after Invisalign treatment. CONCLUSIONS: The Invisalign system successfully achieves certain tooth movements but fails to achieve other movements predictably. No significant Class II correction or overjet reduction was observed with elastics for an average of 7-month duration in the adult population. Additional refinements may be necessary to address problems created during treatment, as evidenced by a posterior open bite incidence.
Assuntos
Má Oclusão Classe II de Angle , Má Oclusão Classe I de Angle , Má Oclusão , Aparelhos Ortodônticos Removíveis , Adulto , Cefalometria , Feminino , Humanos , Masculino , Má Oclusão/terapia , Má Oclusão Classe II de Angle/terapia , Técnicas de Movimentação DentáriaRESUMO
In 2017, the directors of the American Board of Orthodontics (ABO) decided to move forward with a new clinical examination format-a scenario-based examination. The first examination of this type was administered in February 2019, and 2 more exams have been given since then. Each examination consisted of at least 6 scenarios with 4-7 questions for each scenario. Questions came from 4 domains or categories-data gathering and diagnosis, treatment objectives and planning, treatment implementation and management, and critical analysis and outcomes assessment. As of today, 49% of members of the American Association of Orthodontists are ABO certified. For more information about the scenario-based examination and ABO certification or certification renewal processes, go to AmericanBoardOrtho.com.
Assuntos
Ortodontia , Certificação , Assistência Odontológica , Humanos , Exame Físico , Conselhos de Especialidade Profissional , Estados UnidosRESUMO
The American Board of Orthodontics has updated its clinical examination process to remove barriers to the case-based examination, strengthen the specialty, and further distinguish board-certified orthodontists from other dental practitioners providing orthodontic care. The ABO adopted a scenario-based clinical examination and discontinued case requirements. The first new exam was administered in February 2019. It consisted of 6 scenarios with 4-7 questions for each scenario. The scenarios represent a variety of problems and patients, and the questions relate to data gathering and diagnosis, treatment objectives and planning, treatment implementation and management, and critical analysis and outcomes assessment. Feedback from the February 2019 exam was positive, and 4 more have been scheduled. For more information about the ABO certification process, go to AmericanBoardOrtho.com.
Assuntos
Educação de Pós-Graduação em Odontologia , Avaliação Educacional/métodos , Ortodontia/educação , Conselhos de Especialidade Profissional , Certificação , Humanos , Estados UnidosRESUMO
The American Board of Orthodontics (ABO) works to certify orthodontists in a fair, reliable, and valid manner. The process must examine an orthodontist's knowledge, abilities, and critical thinking skills to ensure that each certified orthodontist has the expertise to provide the highest level of patient care. Many medical specialty boards and 4 American Dental Association specialty boards use scenario-based testing for board certification. Changing to a scenario-based clinical examination will allow the ABO to test more orthodontists. The new process will not result in an easier examination; standards will not be lowered. It will offer an improved testing method that will be fair, valid, and reliable for the specialty of orthodontics while increasing accessibility and complementing residency curricula. The ABO's written examination will remain as it is.
Assuntos
Certificação , Inovação Organizacional , Objetivos Organizacionais , Ortodontia/normas , Conselhos de Especialidade Profissional/organização & administração , Humanos , Estados UnidosRESUMO
Despite advances in genomic analysis, the molecular origin of neuroendocrine tumors (NETs) is complex and poorly explained by described oncogenes. The neurotrophic TRK family, including NTRK1, 2, and 3, encode the proteins TRKA, TRKB, TRKC, respectively, involved in normal nerve development. Because NETs develop from the diffuse neuroendocrine system, we sought to determine whether NTRK alterations occur in NETs and whether TRK-targeted therapy would be effective. A patient with metastatic well-differentiated NET, likely of the small intestine, was enrolled on the STARTRK2 trial (ClinicalTrials.gov identifier: NCT02568267) and tissue samples were analyzed using an RNA-Seq next-generation sequencing platform. An ETV6:NTRK3 fusion was identified and therapy was initiated with the investigational agent entrectinib, a potent oral tyrosine kinase inhibitor of TRKA, TRKB, and TRKC. Upon treatment with entrectinib, the patient experienced rapid clinical improvement; his tumor response was characterized by initial tumor growth and necrosis. This is the first report of an NTRK fusion in NETs. Our patient's response to entrectinib suggests that NTRK fusions can be important in the pathogenesis of NETs. Recent DNA-based genomic analyses of NETs may have missed NTRK fusions due its large gene rearrangement size and multiple fusion partners. The tumor's initial pseudoprogression may represent a unique response pattern for TRK-targeted therapies. An effort to characterize the prevalence of NTRK fusions in NETs using optimal sequencing technology is important.
Assuntos
Protocolos de Quimioterapia Combinada Antineoplásica/uso terapêutico , Benzamidas/uso terapêutico , Drogas em Investigação/uso terapêutico , Indazóis/uso terapêutico , Neoplasias Intestinais/terapia , Dor Lombar/terapia , Tumores Neuroendócrinos/terapia , Proteínas de Fusão Oncogênica/genética , Cuidados Paliativos/métodos , Inibidores de Proteínas Quinases/uso terapêutico , Adulto , Biópsia , Quimioterapia Adjuvante/métodos , Ensaios Clínicos como Assunto , Progressão da Doença , Éxons/genética , Sequenciamento de Nucleotídeos em Larga Escala , Humanos , Neoplasias Intestinais/diagnóstico por imagem , Neoplasias Intestinais/genética , Neoplasias Intestinais/patologia , Intestino Delgado/patologia , Dor Lombar/etiologia , Masculino , Gradação de Tumores , Tumores Neuroendócrinos/diagnóstico por imagem , Tumores Neuroendócrinos/genética , Tumores Neuroendócrinos/patologia , Tomografia por Emissão de Pósitrons/métodos , Radioterapia/métodos , Critérios de Avaliação de Resposta em Tumores Sólidos , Análise de Sequência de RNA , Resultado do TratamentoRESUMO
The American Board of Orthodontics has developed tools to help examinees select patients to be used for the Board examination. The Case Management Form can be used to evaluate aspects of a patient's treatment that cannot be measured by other tools. The Case Management Form is a structured treatment-neutral assessment of orthodontic objectives and outcomes associated with a patient's treatment. Despite the availability of this form, examiners continue to see problems, including lack of attention to finishing details, inappropriate treatment objectives, excessive proclination of mandibular incisors due to treatment mechanics, excessive expansion of mandibular intercanine width, closing skeletal open bite with extrusion of anterior teeth leading to excessive gingival display, and failure to recognize the importance of controlling the eruption or extrusion of molars during treatment. In addition, some examinees exhibit a lack of understanding of proper cephalometric tracing and superimposition techniques, which lead to improper interpretation of cephalometric data and treatment outcomes.
Assuntos
Certificação , Ortodontia/normas , Conselhos de Especialidade Profissional , Administração de Caso , Certificação/normas , Certificação/estatística & dados numéricos , Humanos , Ortodontia/estatística & dados numéricos , Conselhos de Especialidade Profissional/normas , Estados UnidosRESUMO
California voles (Microtus californicus Peale) harbor fleas and ticks, may be infected with vector-borne pathogens, and could themselves suffer from disease and serve as a source of infection for people and other animals. Here we summarize publications, museum archives, and recent records of ticks and fleas from California voles. There have been 18 flea species reported on California voles with geographic locations reported for 13. During recent statewide surveys, we found six flea species, with the highest species richness in Humboldt County. We found three of five previously reported tick species as well as a tick resembling the eastern North American tick Ixodes minor Neumann (which we here designate Ixodes "Mojave morphotype") on isolated Amargosa voles and Owens Valley voles (Microtus californicus vallicola Bailey) in Inyo County in 2012 and 2014. Additional incidental observations of this Mojave morphotype tick were on a western harvest mouse (Reithrodontomys megalotis Baird) at the Mojave site and a montane vole (Microtus montanus Peale) in the Owens Valley, both in March, 2014. We cannot rule out that this tick species has been present in remote areas of California but gone unrecognized, but these data are consistent with recent introduction of this tick, possibly from migrating birds. Changes in the ectoparasite fauna suggest changing ecologies of vectors and vector-borne pathogens that could influence animals and people as well.
Assuntos
Arvicolinae/parasitologia , Infestações por Pulgas/veterinária , Ixodidae/fisiologia , Doenças dos Roedores/epidemiologia , Sifonápteros/fisiologia , Infestações por Carrapato/veterinária , Distribuição Animal , Animais , California/epidemiologia , Infestações por Pulgas/epidemiologia , Infestações por Pulgas/parasitologia , Ixodidae/anatomia & histologia , Ixodidae/classificação , Ixodidae/crescimento & desenvolvimento , Larva/anatomia & histologia , Larva/classificação , Larva/crescimento & desenvolvimento , Larva/fisiologia , Ninfa/anatomia & histologia , Ninfa/classificação , Ninfa/crescimento & desenvolvimento , Ninfa/fisiologia , Doenças dos Roedores/parasitologia , Sifonápteros/classificação , Infestações por Carrapato/epidemiologia , Infestações por Carrapato/parasitologiaRESUMO
Rocky Mountain spotted fever (RMSF) is a fatal tick-borne zoonotic disease that has emerged as an epidemic in western North America since the turn of the 21st century. Along the US south-western border and across northern Mexico, the brown dog tick, Rhipicephalus sanguineus, is responsible for spreading the disease between dogs and humans. The widespread nature of the disease and the ongoing epidemics contrast with historically sporadic patterns of the disease. Because dogs are amplifying hosts for the Rickettsia rickettsii bacteria, transmission dynamics between dogs and ticks are critical for understanding the epidemic. In this paper, we developed a compartment metapopulation model and used it to explore the dynamics and drivers of RMSF in dogs and brown dog ticks in a theoretical region in western North America. We discovered that there is an extended lag-as much as two years-between introduction of the pathogen to a naïve population and epidemic-level transmission, suggesting that infected ticks could disseminate extensively before disease is detected. A single large city-size population of dogs was sufficient to maintain the disease over a decade and serve as a source for disease in surrounding smaller towns. This model is a novel tool that can be used to identify high risk areas and key intervention points for epidemic RMSF spread by brown dog ticks.
RESUMO
BACKGROUND: The aim of the investigation was to evaluate if a Class II malocclusion in adult patients can be successfully corrected by maxillary total arch distalization with interradicular mini-screws in combination with completely customized lingual appliances (CCLA). METHODS: Two patient groups were matched for age and gender to determine differences in the quality of final treatment outcome. The treatment results of 40 adult patients with a Class I malocclusion (Group 1) were compared with those of 40 adult patients with a moderate to severe Class II malocclusion (Group 2). All patients had completed treatment with a CCLA (WIN, DW Lingual Systems, Bad Essen, Germany) without overcorrection in the individual treatment plan defined by a target set-up. To compare the treatment results of the two groups, 7 measurements using the American Board of Orthodontics Model Grading System (ABO MGS) and linear measurements for anterior-posterior (AP) and vertical dimensions were assessed at the start of lingual treatment (T1), after debonding (T2B), and compared to the individual target set-up (T2A). RESULTS: A statistically significant AP correction (mean 4.5 mm, min/max 2.1/8.6, SD 1.09) was achieved in Group 2, representing 99% of the planned amount. The planned overbite correction was fully achieved in both the Class I and Class II groups. There was a statistically significant improvement in the ABO scores in both groups (Group 1: 39.4 to 17.7, Group 2: 55.8 to 17.1), with no significant difference between the two groups at T2B. 95% of the adult patients in Group 1 and 95% in Group 2 would meet the ABO standards after maxillary total arch distalization with a CCLA and interradicular mini-screws. CONCLUSIONS: CCLAs in combination with interradicular mini-screws for maxillary total arch distalization can successfully correct moderate to severe Class II malocclusions in adult patients. The quality of the final occlusal outcome is high and the amount of the sagittal correction can be predicted by the individual target set-up.
Assuntos
Má Oclusão Classe II de Angle , Humanos , Má Oclusão Classe II de Angle/terapia , Feminino , Masculino , Adulto , Resultado do Tratamento , Parafusos Ósseos , Adulto Jovem , Técnicas de Movimentação Dentária/métodos , Técnicas de Movimentação Dentária/instrumentação , Maxila/cirurgia , Procedimentos de Ancoragem Ortodôntica/métodos , Procedimentos de Ancoragem Ortodôntica/instrumentação , Estudos Retrospectivos , Desenho de Aparelho OrtodônticoRESUMO
Anaplasma phagocytophilum is an obligately intracellular tick-transmitted bacterial pathogen of humans and other animals. During the course of infection, A. phagocytophilum utilizes gene conversion to shuffle â¼100 functional pseudogenes into a single expression cassette of the msp2(p44) gene, which codes for the major surface antigen and major surface protein 2 (MSP2). The role and extent of msp2(p44) recombination, particularly in hosts that only experience acute infections, is not clear. In the present study, we explored patterns of recombination and expression of the msp2(p44) gene of A. phagocytophilum in a serially infected mouse model. Even though the bacterium was passed rapidly among mice, minimizing the opportunities for the host to develop adaptive immunity, we detected the emergence of 34 unique msp2(p44) expression cassette variants. The expression of msp2(p44) pseudogenes did not follow a consistent pattern among different groups of mice, although some pseudogenes were expressed more frequently than others. In addition, among 263 expressed pseudogenes, 3 mosaic sequences each consisting of 2 different pseudogenes were identified. Population genetic analysis showed that genetic diversity and subpopulation differentiation tended to increase over time until stationarity was reached but that the variance that was observed in allele (expressed pseudogene) frequency could occur by drift alone only if a high variance in bacterial reproduction could be assumed. These findings suggest that evolutionary forces influencing antigen variation in A. phagocytophilum may comprise random genetic drift as well as some innate but apparently nonpurifying selection prior to the strong frequency-dependent selection that occurs cyclically after hosts develop strong adaptive immunity.
Assuntos
Anaplasma phagocytophilum/genética , Variação Antigênica/genética , Evolução Molecular , Anaplasma phagocytophilum/imunologia , Animais , Proteínas da Membrana Bacteriana Externa/genética , DNA Bacteriano/sangue , DNA Bacteriano/genética , Ehrlichiose/genética , Ehrlichiose/microbiologia , Deriva Genética , Genética Populacional , Cavalos , Interações Hospedeiro-Patógeno/genética , Humanos , Leucócitos/microbiologia , Masculino , Camundongos , Camundongos Endogâmicos C3H , Pseudogenes , Recombinação Genética , Seleção Genética , Inoculações SeriadasRESUMO
This critical review focuses on the origins and preparation of bio-based surfactants, defined here as non-soap, amphiphilic molecules in which the carbon atoms are derived from annually renewable feedstocks. Environmental concerns and market pressures have led to greater relevance of these chemicals in commercial applications in recent years and extensive research has gone into exploring new classes of surfactants. Highlighted here are examples of bio-based surfactants that are produced on an industrial scale and/or are based on abundant starting materials. The trend of increasing use of renewable resources as starting materials for surfactants is introduced, followed by extensive discussion of the major classes of bio-derived hydrophobes and hydrophiles. Also discussed is the status of research and development with regard to biosynthetically produced surfactants. Finally, concluding remarks address the potential for new surfactant molecular structures as a result of ongoing development in the chemistry of biorefineries, i.e., that the transformation of lignocellulose into fuels is likely to support the manufacturing of new bio-based coproducts (238 references).
RESUMO
Sarcoptic mange poses a serious conservation threat to endangered San Joaquin kit foxes (Vulpes macrotis mutica). After first appearing in Bakersfield, California in spring 2013, mange reduced the kit fox population approximately 50% until the epidemic ended with minimally detectable endemic cases after 2020. Mange is lethal and thus, with such a high force of infection and lack of immunity, it remains unclear why the epidemic did not burn itself out rapidly and how it persisted so long. Here we explored spatio-temporal patterns of the epidemic, analyzed historical movement data, and created a compartment metapopulation model (named "metaseir") to evaluate whether movement of foxes among patches and spatial heterogeneity would reproduce the eight years epidemic with 50% population reduction observed in Bakersfield. Our main findings from metaseir were that: 1) a simple metapopulation model can capture the Bakersfield-like disease epidemic dynamics even when there is no environmental reservoir or external spillover host, 2) the most impactful parameter on persistence and magnitude of the epidemic is the projection, ß/αß (transmission over decay rate of transmission over space), 3) heterogeneity in patch carrying capacities changes the critical value of the projection needed to achieve an epidemic but makes little difference to epidemic persistence time, and 4) the epidemic is relatively insensitive to birth rates and density vs. frequency-dependent transmission. Our model can help guide management and assessment of metapopulation viability of this vulpid subspecies, while the exploratory data analysis and model will also be valuable to understand mange in other, particularly den-occupying, species.
Assuntos
Escabiose , Animais , Escabiose/epidemiologia , Escabiose/veterinária , Raposas , Conservação dos Recursos NaturaisRESUMO
INTRODUCTION: Knowledge of the nonlinear viscoelastic properties of the liver is important, but the complex tissue behavior outside the linear viscoelastic regime has impeded their characterization, particularly in vivo. Combining static compression with magnetic resonance (MR) elastography has the potential to be a useful imaging method for assessing large deformation mechanical properties of soft tissues in vivo. However, this remains to be verified. Therefore this study aims first to determine whether MR elastography can measure the nonlinear mechanical properties of ex vivo bovine liver tissue under varying levels of uniform and focal preloads (up to 30%), and second to compare MR elastography-derived complex shear modulus with standard rheological measurements. METHOD: Nine fresh bovine livers were collected from a local abattoir, and experiments were conducted within 12hr of death. Two cubic samples (â¼10 × 10 × 10 cm3) were dissected from each liver and imaged using MR elastography (60 Hz) under 4 levels of uniform and focal preload (1, 10, 20, and 30% of sample width) to investigate the relationship between MR elastography-derived complex shear modulus (G∗) and the maximum principal Right Cauchy Green Strain (C11). Three tissue samples from each of the same 9 livers underwent oscillatory rheometry under the same 4 preloads (1, 10, 20, and 30% strain). MR elastography-derived complex shear modulus (G∗) from the uniform preload was validated against rheometry by fitting the frequency dependence of G∗ with a power-law and extrapolating rheometry-derived G∗ to 60 Hz. RESULTS: MR elastography-derived G∗ increased with increasing compressive large deformation strain, and followed a power-law curve (G∗ = 1.73 × C11-0.38, R2 = 0.96). Similarly, rheometry-derived G∗ at 1 Hz, increasing from 0.66 ± 1.03 kPa (1% strain) to 1.84 ± 1.65 kPa (30% strain, RM one-way ANOVA, P < 0.001), and the frequency dependence of G∗ followed a power-law with the exponent decreasing from 0.13 to 0.06 with increasing preload. MR elastography-derived G∗ was 1.4-3.1 times higher than the extrapolated rheometry-derived G∗ at 60 Hz, but the strain dependence was consistent between rheometry and MR elastography measurements. CONCLUSIONS: This study demonstrates that MR elastography can detect changes in ex vivo bovine liver complex shear modulus due to either uniform or focal preload and therefore can be a useful technique to characterize nonlinear viscoelastic properties of soft tissue, provided that strains applied to the tissue can be quantified. Although MR elastography could reliably characterize the strain dependence of the ex vivo bovine liver, MR elastography overestimated the complex shear modulus of the tissue compared to rheological measurements, particularly at lower preload (<10%). That is likely to be important in clinical hepatic MR elastography diagnosis studies if preload is not carefully considered. A limitation is the absence of overlapping frequency between rheometry and MR elastography for formal validation.
Assuntos
Técnicas de Imagem por Elasticidade , Animais , Bovinos , Técnicas de Imagem por Elasticidade/métodos , Elasticidade , Viscosidade , Fígado/diagnóstico por imagem , ReologiaRESUMO
OBJECTIVE: The objective of this study was to measure the forces and moments exerted by direct printed aligners (DPAs) with varying facial and lingual aligner surface thicknesses, in all three planes of space, during lingual movement of a maxillary central incisor. MATERIALS AND METHODS: An in vitro experimental setup was used to quantify forces and moments experienced by a programmed tooth to be moved and by adjacent anchor teeth, during lingual movement of a maxillary central incisor. DPAs were directly 3D-printed with Tera Harz TC-85 (Graphy Inc., Seoul, South Korea) clear photocurable resin in 100-µm layers. Three multi-axis sensors were used to measure the moments and forces generated by 0.50 mm thick DPAs modified with labial and lingual surface thicknesses of 1.00 mm in selective locations. The sensors were connected to three maxillary incisors (the upper left central, the upper right central, and the upper left lateral incisors) during 0.50 mm of programmed lingual bodily movement of the upper left central incisor. Moment-to-force ratios were calculated for all three incisors. Aligners were benchtop tested in a temperature-controlled chamber at intra-oral temperature to simulate intra-oral conditions. RESULTS: The results showed that increased facial thickness of DPAs slightly reduced force levels on the upper left central incisor compared to DPAs of uniform thickness of 0.50 mm. Additionally, increasing the lingual thickness of adjacent teeth reduced force and moment side effects on the adjacent teeth. DPAs can produce moment-to-force ratios indicative of controlled tipping. CONCLUSIONS: Targeted increases in thickness of direct 3D-printed aligners change the magnitude of forces and moments generated, albeit in complex patterns that are difficult to predict. The ability to vary labiolingual thicknesses of DPAs is promising to optimize the prescribed orthodontic movements while minimizing unwanted tooth movements, thereby increasing the predictability of tooth movements.