RESUMO
The Cr/SiO2 Phillips catalyst has taken a central role in ethylene polymerization since its invention in 1953. The uniqueness of this catalyst is related to its ability to produce broad molecular weight distribution (MWD) PE materials as well as that no co-catalysts are required to attain activity. Nonetheless, co-catalysts in the form of metal-alkyls can be added for scavenging poisons, enhancing catalyst activity, reducing the induction period, and tailoring polymer characteristics. The activation mechanism and related polymerization mechanism remain elusive, despite extensive industrial and academic research. Here, we show that by varying the type and amount of metal-alkyl co-catalyst, we can tailor polymer properties around a single Cr/SiO2 Phillips catalyst formulation. Furthermore, we show that these different polymer properties exist in the early stages of polymerization. We have used conventional polymer characterization techniques, such as size exclusion chromatography (SEC) and 13 Câ NMR, for studying the metal-alkyl co-catalyst effect on short-chain branching (SCB), long-chain branching (LCB) and molecular weight distribution (MWD) at the bulk scale. In addition, scanning transmission X-ray microscopy (STXM) was used as a synchrotron technique to study the PE formation in the early stages: allowing us to investigate the produced type of early-stage PE within one particle cross-section with high energy resolution and nanometer scale spatial resolution.
RESUMO
A combination of X-ray ptychography and X-ray fluorescence tomography (XRF) has been used to study the fragmentation behavior of an individual Ziegler-Natta catalyst particle, â¼40 µm in diameter, in the early stages of propylene polymerization with submicron spatial resolution. The electron density signal obtained from X-ray ptychography gives the composite phases of the Ziegler-Natta catalyst particle fragments and isotactic polypropylene, while 3-D XRF visualizes multiple isolated clusters, rich in Ti, of several microns in size. The radial distribution of Ti species throughout the polymer-catalyst composite particle shows that the continuous bisection fragmentation model is the main contributor to the fragmentation pathway of the catalyst particle as a whole. Furthermore, within the largest Ti clusters the fragmentation pathway was found to occur through both the continuous bisection and layer-by-layer models. The fragmentation behavior of polyolefin catalysts was for the first time visualized in 3-D by directly imaging and correlating the distribution of the Ti species to the polymer-catalyst composite phase.
RESUMO
The Cr/SiO2 Phillips catalyst has taken a central role in ethylene polymerization ever since its discovery in 1953. This catalyst is unique compared to other ethylene polymerization catalysts, since it is active without the addition of a metal-alkyl co-catalyst. However, metal-alkyls can be added for scavenging poisons, enhancing the catalyst activity, reducing the induction period and altering polymer characteristics. Despite extensive research into the working state of the catalyst, still no consensus has been reached. Here, we show that by varying the type of metal-alkyl co-catalyst and its amount, the Cr redox chemistry can be tailored, resulting in distinct catalyst activities, induction periods, and polymer characteristics. We have used in-situ UV-Vis-NIR diffuse reflectance spectroscopy (DRS) for studying the Cr oxidation state during the reduction by tri-ethyl borane (TEB) or tri-ethyl aluminum (TEAl) and during subsequent ethylene polymerization. The results show that TEB primarily acts as a reductant and reduces Cr6+ with subsequent ethylene polymerization resulting in rapid polyethylene formation. TEAl generated two types of Cr2+ sites, inaccessible Cr3+ sites and active Cr4+ sites. Subsequent addition of ethylene also revealed an increased reducibility of residual Cr6+ sites and resulted in rapid polyethylene formation. Our results demonstrate the possibility of controlling the reduction chemistry by adding the proper amount and type of metal-alkyl for obtaining desired catalyst activities and tailored polyethylene characteristics.
RESUMO
Ziegler-type catalysts are the grand old workhorse of the polyolefin industry, yet their hierarchically complex nature complicates polymerization activity-catalyst structure relationships. In this work, the degree of catalyst framework fragmentation of a high-density polyethylene (HDPE) Ziegler-type catalyst was studied using ptychography X-ray-computed nanotomography (PXCT) in the early stages of ethylene polymerization under mild reaction conditions. An ensemble consisting of 434 fully reconstructed ethylene prepolymerized Ziegler catalyst particles prepared at a polymer yield of 3.4 g HDPE/g catalyst was imaged. This enabled a statistical route to study the heterogeneity in the degree of particle fragmentation and therefore local polymerization activity at an achieved 3-D spatial resolution of 74 nm without requiring invasive imaging tools. To study the degree of catalyst fragmentation within the ensemble, a fragmentation parameter was constructed based on a k-means clustering algorithm that relates the quantity of polyethylene formed to the average size of the spatially resolved catalyst fragments. With this classification method, we have identified particles that exhibit weak, moderate, and strong degrees of catalyst fragmentation, showing that there is a strong heterogeneity in the overall catalyst particle fragmentation and thus polymerization activity within the entire ensemble. This hints toward local mass transfer limitations or other deactivation phenomena. The methodology used here can be applied to all polyolefin catalysts, including metallocene and the Phillips catalysts to gain statistically relevant fundamental insights in the fragmentation behavior of an ensemble of catalyst particles.
RESUMO
In the search for more efficient single-center ethene/α-olefin copolymerization catalysts, metallocenes bearing a 2-indenyl substituent pattern have largely been ignored in the past. Here, we show that such a structural motif yields competent linear low-density polyethylene (LLDPE) catalysts. They are also relatively easy to synthesize, allowing for a wide structural amplification. A screening of 28 catalysts reveals that the lead catalyst in this study displays high comonomer affinity and molecular weight capability at industrially relevant temperatures. QSAR models show that steric factors likely contribute stronger than electronic factors to the observed substituent trends, both for comonomer affinity and MW capability.
RESUMO
One of the important product parameters of polyolefins is their molecular weight (distribution). A common way to control this parameter is to add molecular hydrogen during the polymerization, which then acts as a chain transfer agent. The factors governing the hydrogen sensitivity of olefin polymerization catalysts are poorly understood and have attracted little attention from computational chemists. To explore the electronic factors determining hydrogen sensitivity we performed density functional calculations on a wide range of simple model systems including some metallocenes and a few basic models of heterogeneous catalysts. As a quantitative measure for hydrogen sensitivity we used the ratio of (i) the rate constant for chain transfer to hydrogen to (ii) the rate constant for ethene insertion, k(h)/k(p) (see the scheme below), and as a measure of electrophilicity we used the energy of complexation to the probe molecule ammonia. [Formula: see text] For isolated species in the gas phase, complexation energies appear to dominate the chemistry. Ethene complexes more strongly than hydrogen and with increasing electrophilicity of the metal centre this difference grows; the hydrogen sensitivity decreases accordingly. Although many factors (like catalyst dormancy and deactivation issues) complicate the comparison with experiment, this result seems to agree both in broad terms with the experimental lower hydrogen sensitivity of heterogeneous catalysts, and more specifically with the increased hydrogen sensitivity of highly alkylated or fused metallocenes. The opposite conclusion reached by Blom (see Blom et al 2002 Macromol. Chem. Phys. 203 381-7) is due to the use of a very different measure of electrophilicity, rather than to different experimental data.
RESUMO
A family of ca. 50 imidotitanium precatalysts [Ti(NR)(Me(3)[9]aneN(3))Cl(2)](R = alkyl or aryl; Me(3)[9]aneN(3)= 1,4,7-trimethyltriazacyclononane) were prepared in good yields using semi-automated procedures; high-throughput screening techniques identified seven highly active ethylene polymerisation precatalysts with activities in the range ca. 3 400 to 10 000 kg(PE) mol(-1) h(-1) bar(-1).
RESUMO
The influence of methylaluminoxane (MAO) catalyst activators of different concentrations and preparative histories on the performance of 1-hexene polymerisations was investigated by kinetic methods, using rac-Me2Si(2-Me-Benz[e]Ind)2ZrCl2 as the standard catalyst precursor. Fast sampling and analysis allow the time dependence of monomer conversion and the growth of the number-average polymer molecular weight to be determined at a sufficiently short timescale to make this a feasible method for routine catalyst evaluation. Differences in productivity, polymer molecular weight and active species count are shown to be primarily a linear function of the trimethylaluminium concentration. The results in toluene and heptane as solvents are compared; the data show that the inferior performance in heptane is due to a substantially lower active species concentration.
Assuntos
Alumínio/química , Compostos Organometálicos/química , Polímeros/química , Catálise , Cinética , Estrutura Molecular , Peso Molecular , Compostos Organometálicos/síntese química , Polímeros/síntese químicaRESUMO
The presence of "free" trimethylaluminum (TMA) in methylalumoxane (MAO) solutions can be highly detrimental to the performance of metallocene and "post-metallocene" olefin polymerization catalysts. The most used strategy to remove "free" TMA is to evaporate MAO solutions to dryness, until a free-flowing white powder ("solid MAO") is left. This procedure is tedious and potentially hazardous, because in some cases the distillate is a concentrated hydrocarbon solution of TMA. Moreover, "solid MAO" is poorly soluble in common polymerization media, and once in solution it can regenerate TMA to some extent. This communication reports on a facile alternative, which consists in the controlled addition of a sterically hindered phenol, such as 2,6-di-tert-butylphenol, effectively trapping "free" TMA. We show here that 2,6-di-tert-butylphenol/MAO solutions activate equally well the dichloro-precursors of well-known zirconocene and bis(phenoxyimine)Ti catalysts, and that their use in propene polymerization results in a substantially higher productivity, polymer stereoregularity, and/or average molecular mass compared with activation by MAO alone.