RESUMO
Emulsion hydrogels are promising materials for encapsulating and stabilizing high amounts of hydrophobic essential oils in hydrophilic matrices. In this work, clove oil-loaded hydrogels (CS/OP-C) are synthesized by combining covalent and physical cross-linking approaches. First, clove oil (CO) was emulsified and stabilized in a chitosan (CS) solution, which was further hardened by Schiff base covalent cross-linking with oxidized pullulan (OP). Second, the hydrogels were subjected to freeze-thaw cycles and, as a result, the clove oil was stabilized in physically cross-linked polymeric walls. Moreover, due to cryogelation, the obtained hydrogels exhibited sponge-like porous interconnected morphology (160-250 µm). By varying the clove oil content in the starting emulsion and the degree of cross-linking, the hydrogels displayed a high water retention capacity (swelling ratios between 1300 and 2000%), excellent elastic properties with fast shape recovery (20 s) after 70% compression, and controlled in vitro clove oil release in simulated skin conditions for 360 h. Furthermore, the prepared clove oil-loaded hydrogels had a strong scavenging activity of 83% and antibacterial and antifungal properties, showing a bacteriostatic effect after 48 and 72 h against S. aureus and E. coli. Our results recommend the new clove oil-embedded emulsion hydrogels as promising future materials for application as wound dressings.
RESUMO
Thermally-induced gelling systems based on Poloxamer 407 (PL) and polysaccharides are known for their biomedical applications; however, phase separation frequently occurs in mixtures of poloxamer and neutral polysaccharides. In the present paper, the carboxymethyl pullulan (CMP) (here synthesized) was proposed for compatibilization with poloxamer (PL). The miscibility between PL and CMP in dilute aqueous solution was studied by capillary viscometry. CMP with substitution degrees higher than 0.5 proved to be compatible with PL. The thermogelation of concentrated PL solutions (17%) in the presence of CMP was monitored by the tube inversion method, texture analysis and rheology. The micellization and gelation of PL in the absence or in the presence of CMP were also studied by dynamic light scattering. The critical micelle temperature and sol-gel transition temperature decrease with the addition of CMP, but the concentration of CMP has a peculiar influence on the rheological parameters of the gels. In fact, low concentrations of CMP decrease the gel strength. With a further increase in polyelectrolyte concentration, the gel strength increases until 1% CMP, then the rheological parameters are lowered again. At 37 °C, the gels are able to recover the initial network structure after high deformations, showing a reversible healing process.
RESUMO
The therapeutic efficiency of plant extracts has been limited by their poor pharmaceutical availability. Hydrogels have promising potential to be applied as wound dressings due to their high capacity to absorb exudates and their enhanced performance in loading and releasing plant extracts. In this work, pullulan/poly (vinyl alcohol) (P/PVA) hydrogels were first prepared using an eco-friendly method based on both a covalent and physical cross-linking approach. Then, the hydrogels were loaded with the hydroalcoholic extract of Calendula officinalis by a simple post-loading immersion method. Different loading capacities were investigated in terms of the physico-chemical properties, chemical composition, mechanical properties, and water absorption. The hydrogels exhibited high loading efficiency due to the hydrogen bonding interactions between polymer and extract. The water retention capacity as well as the mechanical properties decreased with the increase in the extract amount in hydrogel. However, higher amounts of extract in the hydrogel improved the bioadhesiveness. The release of extract from hydrogels was controlled by the Fickian diffusion mechanism. Extract-loaded hydrogels expressed high antioxidant activity, reaching 70% DPPH radical scavenging after 15 min immersion in buffer solution at pH 5.5. Additionally, loaded hydrogels showed a high antibacterial activity against Gram-positive and Gram-negative bacteria and were non-cytotoxic against HDFa cells.
RESUMO
Composite hydrogels containing apatite-like particles can act as scaffolds for osteoblast proliferation, with applications in bone tissue engineering. In this respect, porous biocompatible hydrogels were obtained from chitosan, oxidized pullulan, and PVA in different ratios. The stability of the hydrogels was ensured both by covalent bonds between aldehyde groups of oxidized pullulan and free amino groups of chitosan, and by physical bonds formed during freeze-thaw cycles and lyophilization. The deposition of calcium phosphates was performed by alternate soaking of the porous hydrogels into solutions with calcium and phosphate ions, assuring a basic pH required for hydroxyapatite formation. The mineralized hydrogels were characterized using FTIR spectroscopy, scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis, showing that inorganic particles containing between 80 and 92% hydroxyapatite were deposited in a high amount on the pore walls of the polymeric matrix. The composition of the organic matrix influenced the crystallization of calcium phosphates and the mechanical properties of the composite hydrogels. In vitro biological tests showed that mineralized hydrogels support the proliferation of MG-63 osteoblast-like cells to a greater extent compared to pristine hydrogels.
RESUMO
Novel double cross-linked (DC) hydrogels with pH-/temperature-sensitive properties were designed and developed. Therefore, linear pH-sensitive poly(methyl vinyl ether-alt-maleic acid) (P(VME/MA)) macromolecules were absorbed within a thermosensitive poly(N-isopropylacrylamide-co-hydroxyethylacrylamide)-hydrogel (PNH) and, subsequently, cross-linked together through a solvent-free thermal method. As a novelty, double cross-linked hydrogels were obtained from previously purified polymers in the absence of any solvent or cross-linking agent, which are generally harmful for the body. The new DC structures were characterized by FT-IR spectroscopy, SEM, swelling kinetic measurements, and mechanical tests. The resulting scaffolds exhibited interconnected pores and a flexible pattern, compared to the brittle structure of conventional PNH. The swelling kinetics of DC hydrogels were deeply affected by temperature (25 and 37 °C) and pH (7.4 and 1.2). Furthermore, the hydrogels absorbed a great amount of water in a basic environment and displayed improved mechanical properties. Metoclopramide (Met) was loaded within DC hydrogels as a model drug to investigate the ability of the support to control the drug release rate. The results obtained recommended them as convenient platforms for the oral administration of drugs, with the release of the largest part of the active principle occurring in the colon.
RESUMO
OBJECTIVES: Cyclodextrins (CDs) play a pivotal role in the controlled release of drugs; however, their ability to gradually release drugs is here interrogated: can cyclodextrins, even those that form strong inclusion complexes, sustain a prolonged release of drugs? METHODS: An original chromatographic approach was developed and accordingly we classified and determined drugs that form the most stable inclusion complexes with cyclodextrins. ß-CD and hydroxypropyl-ß-CD (HP-ß-CD) were coupled to pullulan (Pul) microspheres and packed into a chromatographic column. Then, different drugs or model compounds were eluted, and values of the retention time (RT) were determined. In vitro release studies were performed for drugs that form the most stable inclusion complexes. RESULTS: The drugs with the longest RT value form the most stable inclusion complexes with Pul/ß-CD and Pul/HP-ß-CD microspheres. Pul/ß-CD microspheres form more stable inclusion complexes than Pul/HP-ß-CD microspheres. However, in spite of their high stability, they were not able to gradually release the included drug (15 min release time). The cross-chromatographic experiments confirmed the hypothesis that in aqueous solution, drug/cyclodextrin complexes are continuously associated and dissociated. CONCLUSIONS: If the dissociation of the guest molecule is very rapid, why is it expected that these complexes gradually release the drug?
Assuntos
Ciclodextrinas , beta-Ciclodextrinas , Ciclodextrinas/química , 2-Hidroxipropil-beta-Ciclodextrina , beta-Ciclodextrinas/química , Preparações Farmacêuticas , Sistemas de Liberação de Medicamentos , SolubilidadeRESUMO
Local delivery of drugs or antimicrobial agents is a suitable approach in the management of periodontitis when the infection is localized deep in the pockets and does not adequately respond to mechanical debridement and/or systemic antibiotic treatment. In this context, the objective of this study was to prepare new biocomposite films with antimicrobial, anti-inflammatory, and good mechanical properties to be applied in periodontal pockets. The composite film is eco-friendly synthesized from poly(vinyl alcohol) (PVA) cross-linked with oxidized chitosan (OxCS). Silver nanoparticles (AgNps) were inserted during film synthesis by adding freshly chitosan-capped AgNps colloidal solution to the polymer mixture; the addition of AgNps up to 1.44 wt.% improves the physico-chemical properties of the film. The characterization of the films was performed by FT-IR, atomic mass spectrometry, X-ray spectroscopy, and SEM. The films displayed a high swelling ratio (162%), suitable strength (1.46 MPa), and excellent mucoadhesive properties (0.6 N). Then, ibuprofen (IBF) was incorporated within the best film formulation, and the IBF-loaded PVA/OxCS-Ag films could deliver the drug in a sustained manner up to 72 h. The biocomposite films have good antimicrobial properties against representative pathogens for oral cavities. Moreover, the films are biocompatible, as demonstrated by in vitro tests on HDFa cell lines.
RESUMO
The cellular internalization of drug carriers occurs via different endocytic pathways that ultimately involve the endosomes and the lysosomes, organelles where the pH value drops to 6.0 and 5.0, respectively. We aimed to design and characterize pH/temperature-responsive carriers for the effective delivery of the anti-tumoral drug doxorubicin. To this purpose, poly(N-isopropylacrylamide-co-vinylimidazole) was synthesized as an attractive pH/temperature-sensitive copolymer. Microspheres made of this copolymer, loaded with doxorubicin (MS-DXR), disintegrate in monodisperse nanospheres (NS-DXR) under conditions similar to that found in the bloodstream (pH = 7.4, temperature of 36 °C) releasing a small amount of payload. However, in environments that simulate the endosomal and lysosomal conditions, nanospheres solubilize, releasing the entire amount of drug. We followed the NS-DXR internalization using two cancer cell lines, hepatic carcinoma HepG2 cells and lung adenocarcinoma A549 cells. The data showed that NS-DXR are internalized to a greater extent by HepG2 cells than A549 cells, and this correlated with increased cytotoxicity induced by NS-DXR in HepG2 cells compared with A549 cells. Moreover, NS-DXR particles do not cause hemolysis and erythrocytes aggregation. Administered in vivo, NS-DXR localized in the liver and kidneys of mice, and the loading of DXR into NS resulted in the reduced renal clearance of DXR. In conclusion, the newly developed poly(N-isopropylacrylamide-co-vinyl imidazole) particles are biocompatible and may be introduced as carriers for doxorubicin to hepatic tumors.
RESUMO
PVA/chitosan (PVA/CS) composite hydrogels incorporating silver nanoparticles (AgNPs) were prepared by double-cross-linked procedures: freeze−thawing and electrostatic interactions. Oxalic acid (OA) was used both for solubilization and ionic cross-linking of CS. AgNPs covered by CS (CS-AgNPs) with an average diameter of 9 nm and 18% silver were obtained in the presence of CS, acting as reducing agent and particle stabilizer. The increase of the number of freeze−thaw cycles, as well as of the PVA:CS and OA:CS ratios, resulted in an increase of the gel fraction and elastic modulus. Practically, the elastic modulus of the hydrogels increased from 3.5 kPa in the absence of OA to 11.6 kPa at a 1:1 OA:CS weight ratio, proving that OA was involved in physical cross-linking. The physicochemical properties were not altered by the addition of CS-AgNPs in low concentration; however, concentrations higher than 3% resulted in low gel fraction and elastic modulus. The amount of silver released from the composite hydrogels is very low (<0.4%), showing that AgNPs were well trapped within the polymeric matrix. The composite hydrogels displayed antimicrobial activity against S. aureus, K. pneumoniae or P. gingivalis. The low cytotoxicity and the antibacterial efficacy of hydrogels recommend them for wound and periodontitis treatment.
RESUMO
A thermosensitive copolymer composed of amphiphilic triblock copolymer, poloxamer 407, grafted on hydrophilic pullulan with pendant carboxymethyl groups (CMP) was prepared and characterized. The structure of the new copolymer was assessed by Fourier transform infrared (FT-IR) and 1H nuclear magnetic resonance (1H NMR) spectroscopy. The content of the poloxamer in the grafted copolymer was 83.8% (w/w). The effect of the copolymer concentration on the gelation behavior was analyzed by the vertical method and rheological tests; the gel phase of the copolymer occurred at a lower concentration (11%, w/v) as compared with poloxamer (18%, w/v). The starting gelation time under the simulated physiological conditions (phosphate buffer with a pH of 7.4, at 37 °C) was sensitive on the rest temperature before the test, this being 990 s and 280 s after 24 h rest at 4 °C and 20 °C, respectively. The rheological tests evidenced a high elasticity and excellent ability of the copolymer to recover the initial structure after the removal of the applied force or external stimuli. Moreover, the hydrogel has proved a sustained release of amoxicillin (taken as a model drug) over 168 h. Taken together, the results clearly indicate that this copolymer can be used as an injectable hydrogel.
RESUMO
Stable chitosan/PVA-based hydrogels were obtained by combining covalent and physical cross-linking methods. As covalent cross-linkers, epoxy agents with different chain lengths were used, while freeze-thaw cycles were applied for additional physical cross-linking. The chemical structure of the hydrogel was examined by FTIR spectroscopy whereas the morphology was analyzed by SEM, showing well-defined pores with dimensions of around 50 µm in diameter. It was proved that gel fraction and the network morphology were deeply influenced by the synthesis conditions. Chitosan/PVA hydrogel showed a relative high swelling rate, reaching equilibrium in the first hour. The values obtained for the elastic modulus were relatively low (3-30 kPa); as a result, these hydrogels are soft and very flexible, and are ideal candidates for medical applications as wound or oral dressings. In addition, the natural antimicrobial activity of chitosan was enhanced by in situ generation of silver nanoparticles (AgNPs) under UV irradiation. The total amount of Ag from hydrogel was determined by elemental analyses and its crystalline state was confirmed by XRD. The CS/PVA hydrogels entrapped with AgNPs exhibited high inhibitory activity against S. aureus and K. pneumonia. The vitality tests confirmed the lack of cytotoxicity of CS/PVA hydrogels without and with AgNPs.
RESUMO
Hepatic cancer is one of the most widespread maladies worldwide that requires urgent therapies and thus reliable means for testing anti-cancer drugs. The switch from two-dimensional (2D) to three-dimensional (3D) cell cultures produced an improvement in the in vitro outcomes for testing anti-cancer drugs. We aimed to develop a novel hyaluronic acid (HA)-based 3D cell model of human hepatocellular carcinoma (HepG2 cells) for drug testing and to assess comparatively in 3D vs. 2D, the cytotoxicity and the apoptotic response to the anti-tumor agent, cisplatin. The 3D model was developed by seeding HepG2 cells in a HA/poly(methylvinylether-alt-maleic acid) (HA3P50)-based scaffold. Compared to 2D, the cells grown in the HA3P50 scaffold proliferate into larger-cellular aggregates that exhibit liver-like functions by controlling the release of hepatocyte-specific biomarkers (albumin, urea, bile acids, transaminases) and the synthesis of cytochrome-P450 (CYP)7A1 enzyme. Also, growing the cells in the scaffold sensitize the hepatocytes to the anti-tumor effect of cisplatin, by a mechanism involving the activation of ERK/p38α-MAPK and dysregulation of NF-kB/STAT3/Bcl-2 pathways. In conclusion, the newly developed HA-based 3D model is suitable for chemotherapeutic drug testing on hepatocellular carcinoma. Moreover, the system can be adapted and employed as experimental platform functioning as a proper tissue/tumor surrogate.
Assuntos
Materiais Biomiméticos/química , Carcinoma Hepatocelular/metabolismo , Cisplatino/farmacologia , Ácido Hialurônico/química , Neoplasias Hepáticas/metabolismo , Biomarcadores Tumorais/metabolismo , Carcinoma Hepatocelular/tratamento farmacológico , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Colesterol 7-alfa-Hidroxilase/metabolismo , Cisplatino/química , Ensaios de Seleção de Medicamentos Antitumorais , Regulação Neoplásica da Expressão Gênica/efeitos dos fármacos , Células Hep G2 , Humanos , Neoplasias Hepáticas/tratamento farmacológico , Alicerces TeciduaisRESUMO
An original multicompartmental drug delivery system based on encapsulation of "intelligent" starch microspheres was designed and developed. Starch microspheres with thermo-responsive properties and possessing strong anionic functional groups (-SO(3)H), capable to bind electrostatically drugs, has been prepared. Firstly, the thermo-responsive units based on copolymer of poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) with a lower critical solution temperature around 36 degrees C, were grafted on preformed starch microspheres. Secondly, the strong anionic groups (-SO(3)H) were introduced by sequential grafting of 2-acrylamido-2-methyl-1-propanesulfonic acid on the remaining--OH groups of starch. The thermo-sensitive microspheres with sulfonic groups display a sharp phase transition around the human body temperature. They were complexed with the positively-charged metoclopramide (low molecular weight model drug) and then encapsulated in cellulose acetate butyrate microcapsules by an oil-in-water solvent evaporation method. The swelling and diffusion of encapsulated microspheres to the aqueous continuous phase is avoided because the temperature of aqueous phase is higher than volume phase transition temperature (VPTT) of microspheres. This multicompartmental device could develop the background of "smart" implantable drug delivery system for persons that work in dangerous cold places (builders, climbers). When the temperature of the human body decreases below the normal temperature (the threshold temperature could be tuned), the encapsulated microspheres swell extensively in contact with physiological fluids, break the microcapsules and a large amount of bioactive compounds is released, keeping the activity of the vital organs. In normal physiological conditions (above LCST), the microspheres slightly swell, fill up the microcavities of microcapsules, but do not break them and release the drug in microcompartments. These microcompartments become microreservoirs with bioactive compounds and release it with a very low rate maintaining the necessary concentration for a sustained activity of the body.
Assuntos
Preparações de Ação Retardada/administração & dosagem , Sistemas de Liberação de Medicamentos/métodos , Microesferas , Amido/química , Temperatura , Acrilamidas/química , Resinas Acrílicas , Cápsulas , Celulose/análogos & derivados , Celulose/química , Cicloexanos/química , Preparações de Ação Retardada/química , Humanos , Troca Iônica , Metoclopramida/administração & dosagem , Metoclopramida/química , Polímeros/química , Eletricidade Estática , Temperatura de Transição , Agentes Molhantes/químicaRESUMO
Essentially, the human body can release in different disease conditions specific biomolecules such as histamines when the body encounters a toxic substance, antibodies which are part of the body's natural immune response or nitric oxide as a cardiovascular signalling molecule. Design and development of "intelligent" delivery systems able to release the therapeutic agent only in the presence of bioactive compounds was presented here. Poly(N-isopropylacrylamide-co-N-(3-aminopropyl)methacrylamide)) (poly(NIPAAm-co-APM)) was synthesized as an exciting pH/temperature sensitive copolymer. Under physiological conditions (pH = 7.4), the APM in copolymer is in the ionized state (pKa = 8.7), highly hydrophilic and therefore the copolymer loses thermosensitive properties. Remarkably, after electrostatic interactions of APM with specific biomolecules, the copolymer restores the thermosensitive property. Thus, the microgels synthesized from this copolymer are in the "inactivated" state at normal physiological pH and temperature (pH = 7.4 and T = 36 °C). In the presence of specific biomolecules, microgels undergo "activation", shrink and expel mechanically a certain amount of drug. It must be mentioned that the pH-sensitive component plays the role of a biosensor, the biomolecule acts as a triggering agent, and the poly(NIPAAm) represents the delivery component (actuator). MTT tests showed that poly(NIPAAm-co-APM) microspheres are completely devoid of toxicity; moreover, the rabbit dermal fibroblasts vastly adhere to the surface of microspheres.
Assuntos
Derme/metabolismo , Portadores de Fármacos , Fibroblastos/metabolismo , Teste de Materiais , Animais , Preparações de Ação Retardada/síntese química , Preparações de Ação Retardada/química , Preparações de Ação Retardada/farmacocinética , Preparações de Ação Retardada/farmacologia , Derme/citologia , Portadores de Fármacos/síntese química , Portadores de Fármacos/química , Portadores de Fármacos/farmacocinética , Portadores de Fármacos/farmacologia , Fibroblastos/citologia , Concentração de Íons de Hidrogênio , CoelhosRESUMO
A new amphiphilic pullulan derivative (DBAP-PO) was obtained by grafting tertiary butyl amine and octanoyl groups on the pullulan backbone as cationic and hydrophobic moieties, respectively. The structural characteristics of the modified polymer were investigated by FT-IR and 1H and 13C NMR spectroscopy. The self-association ability in aqueous solution of DBAP-PO was studied by viscosity and fluorescence methods. The intrinsic viscosity of the polymer was determined by Wolf model. The critical aggregation concentration (CAC) value of 0.028 g/dL, determined by fluorescence measurements in the presence of pyrene, was confirmed by capillary viscosimetry and dynamic laser scattering (DLS). Dialysis method was used to demonstrate the capacity of the pullulan derivative to form spherical nanoparticles (d ~ 200 nm) loaded with model drug, sodium diclofenac (DF) (74% entrapment efficiency). The DF release was sustained and pH-dependent. In vitro cytotoxicity as well as morphological studies conducted on the human skin fibroblasts showed that DBAP-PO/DF nanoparticles do not exhibit cytotoxic effects at the pharmacologically relevant concentration of DF, maintaining the typical morphology of the cells.
Assuntos
Portadores de Fármacos , Glucanos/química , Nanopartículas/administração & dosagem , Cátions , Células Cultivadas , Diclofenaco/administração & dosagem , Diclofenaco/farmacocinética , Avaliação Pré-Clínica de Medicamentos , Liberação Controlada de Fármacos , Fibroblastos/efeitos dos fármacos , Glucanos/administração & dosagem , Glucanos/toxicidade , Humanos , Concentração de Íons de Hidrogênio , Interações Hidrofóbicas e Hidrofílicas , Estrutura Molecular , Nanopartículas/química , Nanopartículas/toxicidade , Ressonância Magnética Nuclear Biomolecular , Espectroscopia de Infravermelho com Transformada de Fourier , Tensoativos/administração & dosagem , Tensoativos/química , Tensoativos/toxicidade , Viscosidade , ÁguaRESUMO
A new sponge-type hydrogel was obtained by cross-linking hyaluronic acid (HA) and poly(methylvinylether-alt-maleic acid) P(MVE-alt-MA) through a solvent-free thermal method. The sponge-type hydrogel was characterized and checked as a support for cell growth. The influence of concentration and weight ratio of polymers on the morphology and hydrogel stability was investigated. The total polymers concentration of 3% (w/w) and the weight ratio of 1:1 were optimal for the synthesis of a stable hydrogel (HA3P50) and to promote cell proliferation. The swelling measurements revealed a high-water absorption capacity of the hydrogel in basic medium. Diphenhydramine (DPH), lidocaine (Lid) and propranolol (Prop) were loaded within the hydrogel as a model drugs to investigate the ability of drug transport and release. In vitro studies revealed that HA3P50 hydrogel promoted the adhesion and proliferation of human hepatocellular carcinoma cell line HepG2, providing a good support for 3D cell culture to obtain surrogate tumor scaffold suitable for preclinical anti-cancer drug screening.
Assuntos
Proliferação de Células/efeitos dos fármacos , Ácido Hialurônico/química , Hidrogel de Polietilenoglicol-Dimetacrilato/farmacologia , Hidrogéis/farmacologia , Carcinoma Hepatocelular/tratamento farmacológico , Ciclo Celular/efeitos dos fármacos , Difenidramina/farmacologia , Células Hep G2 , Humanos , Ácido Hialurônico/farmacologia , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Hidrogéis/química , Lidocaína/farmacologia , Neoplasias Hepáticas/tratamento farmacológico , Maleatos/química , Maleatos/farmacologia , Propranolol/farmacologiaRESUMO
The chitosan hydrochloride (Cs·HCl) was obtained as a polymer soluble in physiological solutions to be used as potential support for safely cell culture or cell encapsulation. Viability tests showed that concentrations between 0.16 and 5 mg/mL of Cs·HCl were not toxic for the HEK293 cells. In parallel, aldehyde-functionalized pullulan (Pul-CHO) was synthesized as the macromolecular cross-linker. Cs·HCl was dissolved in 0.9% NaCl and injected (INJECTOMAT SEP 21S PLUS) through a needle to obtain small droplets in a sodium tripolyphosphate solution in the absence and presence of 0.1% (w/v) Pul-CHO. Simple and dual cross-linked millicapsules were obtained with pore size ranging from 50 µm to 5 µm, respectively. FITC-Dextran with molecular weights of 4000 and 70,000 g/mol was encapsulated during microcapsule synthesis as macromolecular models to check the permeability of Cs millicapsules. The results show that FITC-Dextran 4000 and 70,000 diffuses quickly from simple cross-linked millicapsules while dual cross-linked millicapsules release slowly both FITC-dextrans. Microscopy experiments show that HEK 293 cells adhere to the surface of millicapsules. Taken together the data reveal that Cs millicapsules allow the cell growth on their surface, and thus, they offer new perspectives for cell encapsulation strategy.
Assuntos
Técnicas de Cultura de Células , Encapsulamento de Células , Quitosana/química , Reagentes de Ligações Cruzadas/química , Quitosana/síntese química , Quitosana/farmacologia , Reagentes de Ligações Cruzadas/síntese química , Reagentes de Ligações Cruzadas/farmacologia , Dextranos/química , Fluoresceína-5-Isotiocianato/análogos & derivados , Fluoresceína-5-Isotiocianato/química , Glucanos/síntese química , Glucanos/química , Células HEK293 , HumanosRESUMO
Most pH-/temperature-responsive polymers for controlled release of drugs are used as cross-linked hydrogels. However, the solubility properties of the linear polymers below and above the lower critical solution temperature (LCST) are not exploited. Here, the preparation and characterization of poly (N-isopropylacrylamide-co-methacrylic acid-co-methyl methacrylate) (poly (NIPAAm-co-MA-co-MM)) and poly (N-isopropylacrylamide-co-acrylamide) (poly (NIPAAm-co-AAm)), known as "smart" polymers (SP), is reported. Both poly (NIPAAm-co-MA-co-MM) and poly (NIPAAm-co-AAm) display pH- and temperature-responsive properties. Poly (NIPAAm-co-MA-co-MM) was designed to be insoluble in the gastric fluid (pH = 1.2), but soluble in the intestinal fluid (pH = 6.8 and 7.4), at the body temperature (37 degrees C). Poly (NIPAAm-co-AAm) was designed to have a lower critical solution temperature (LCST) corresponding to 37 degrees C at pH = 7.4, therefore it is not soluble above the LCST. The solubility characteristics of these copolymers were exploited to modulate the rate of release of drugs by changing pH and/or temperature. These copolymers were solubilized with hydrophobic cellulose acetate butyrate (CAB) and vitamin B(12) (taken as a water soluble drug model system) in an acetone/methanol mixture and dispersed in mineral oil. By a progressive evaporation of the solvent, the liquid droplets were transformed into loaded CAB/SP microspheres. Differential scanning calorimetric studies and scanning electron microscopy analysis demonstrated that the polymeric components of the microspheres precipitated separately during solvent evaporation forming small microdomains. Moreover, vitamin B(12) was found to be molecularly dispersed in both microdomains with no specific affinity for any polymeric component of microspheres. The release of vitamin B(12) was investigated as a function of temperature, pH, and the CAB/SP ratio.
Assuntos
Sistemas de Liberação de Medicamentos , Concentração de Íons de Hidrogênio , Polímeros/química , Temperatura , Varredura Diferencial de Calorimetria , Espectroscopia de Ressonância Magnética , Microscopia Eletrônica de Varredura , Microesferas , Solubilidade , Vitamina B 12/administração & dosagemRESUMO
Composite hydrogels based on pullulan (HP) and poly(vinyl alcohol) (PVA) were both prepared by simple chemical crosslinking with sodium trimethaphosphate (STMP) or by dual crosslinking (simultaneously chemical crosslinking with STMP and physical crosslinking by freeze-thaw technique). The resulting hydrogels and cryogels were designed for tissue engineering applications. PVA, with two different molecular weights (47,000 and 125,000 g/mol; PVA47 and PVA125, respectively), as well as different P/PVA weight ratios were tested. The physico-chemical characterization of the hydrogels was performed by FTIR spectroscopy and scanning electron microscopy (SEM). The swelling kinetics, dissolution behavior, and degradation profiles in simulated physiological conditions (phosphate buffer at pH 7.4) were investigated. Pullulan concentration and the crosslinking method had significant effects on the pore size, swelling ratio, and degradation profiles. Cryogels exhibit lower swelling capacities than the conventional hydrogels but have better stability against hydrolitic degradation. Biocompatibility of the hydrogels was also investigated by both MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) and LDH (lactaten dehydrogenase) assay. The MTT and LDH assays proved that dual crosslinked HP/PVA125 (75:25, w/w) scaffolds are more biocompatible and promote to a greater extent the adhesion and proliferation of L929 murine fibroblast cells than chemically crosslinked HP/PVA47 (50/50, w/w) scaffolds. Moreover, the HP/PVA125 cryogel had the best ability for the adipogenic differentiation of cells. The overall results demonstrated that the HP/PVA composite hydrogels or cryogels are suitable biomaterials for tissue engineering applications.
RESUMO
Most part of pH- and temperature-sensitive microspheres used for the controlled delivery of drugs are not biodegradable. Therefore, the aim of this work is to prepare pH- and temperature-sensitive microspheres from biodegradable and biocompatible natural polymers. Pullulan microspheres were prepared by suspension cross-linking with epichlorohydrin of an aqueous solution of the polymer. In order to confer them temperature sensitivity, poly(N-isopropylacrylamide-co-acrylamide) was grafted onto pullulan microspheres. Then, the pH-sensitive units (-COOH) were introduced by reaction between the remaining -OH groups of the pullulan with succinic anhydride. The grafted pullulan microspheres are more hydrophilic than pullulan microspheres, their swelling degree as well as water regain increase significantly. The thermo-sensitivity of the carboxylated microspheres depends to the number and the ionization form (-COOH/-COO(-)) of carboxylic groups. At a low exchange capacity (0.35 meq/g), microspheres are thermo-sensitive both in the protonated and deprotonated form of -COOH groups. At a higher exchange capacity (2.25 meq/g), microspheres are almost unswellable in the protonated form and swell extensively in the ionized form (up to 28 times than their dried form) loosing in a great extent the thermo-sensitive properties. In isotonic phosphate buffer pH=7.4, both thermo-sensitive and pH/thermo-sensitive microspheres possess a phase transition temperature close to that of the human body temperature. Loading and release profiles of lysozyme, taken as a molecular model system, were investigated.