Autologous free iliac crest bone grafting of glenoid through the rotator interval using double-barrelled cannula.

PURPOSE: The primary aim of this study is to prove that reconstructing the anterior glenoid defect with iliac crest graft arthroscopically using double-barrelled cannula through the rotator interval is safe and prevents both recurrence of instability and the neurovascular injury because subscapularis muscle is not split and procedure is far away from important structures. METHODS: Thirteen patients with anterior shoulder instability and engaging Hill-Sachs lesion were reviewed after arthroscopic reconstruction of the anterior glenoid with iliac crest autogenous graft. Patient satisfaction and Western Ontario Instability Score (WOSI) were evaluated on clinical examination. Computed tomography was used to analyse graft position on sagittal and axial planes. RESULTS: The mean follow-up was 28.7 months (SD 7.1), and age at surgery was 31 years (21 to 64 years). Post-operatively there was only one dislocation due to trauma. There was statistically significant improvement of WOSI scores (p: 0.001). There was not any neurological injury. Graft position on the axial plane was described as flush in 5 cases (41%), lateral in 2 (16%), too lateral in one (8%) and medial in 4 of the cases (33%). Graft position could be accepted as high in only three patients (23%). CONCLUSION: Arthroscopic reconstruction of glenoid defect using autogenous iliac bone graft, through rotator interval, without splitting subscapularis is safe and effective without any neurological injury, producing substantial graft position and good functional outcomes in patients.

Femur can be lengthened over nail, along its mechanical axis : a modified lengthening over nail technique.

The theoretical risk of medialisation of the knee joint and the lateral shift of the lower extremity mechanical axis, due to achievement of lengthening along the anatomical axis is present in the process of lengthening with elongation nails and the "lengthening over nail" technique. With this new technique described in this study we aimed to prove that lengthening over nail can be performed along the mechanical axis of the femur. Six lower-limb models were used to perform three different lengthening techniques. In group 1, lengthening was achieved along the anatomical axis with an external fixator. In group 2, the clamps of the external fixator were adjusted at 6° to achieve lengthening along the mechanical axis. In group 3, eight different sized nails were applied with an external fixator (angle adjustable clamps were at 6°) to achieve lengthening along the mechanical axis by LON technique. Photographs were taken after each cm of lengthening and the distance from the mechanical axis line were measured. The modified LON technique described in this study provided lengthening along the mechanical axis. One of the main advantages of the procedure described in our study is the chance for reconsideration and revision of unforeseen angulations and malalignments, via the help of the distal angular adjustable clamps; during the time of the surgery for external fixator removal before application of the poller screws.

Young Bovine Hip Model for Hip Arthroscopy Training.

Hip arthroscopy is associated with risks for complications, especially for novice surgeons. The present article reports use of a young bovine hip as a valid educational tool for key components of arthroscopic treatment of femoroacetabular impingement syndrome, ie, labrum repair and cam excision. The purpose of this Technical Note is to describe the steps of arthroscopic femoroacetabular impingement treatment in the bovine hip.

The effect of arthroscopic coracoplasty on subscapularis strength in cases of subcoracoid impingement in the absence of subscapularis tear.

Subcoracoid impingement leads to anterior shoulder pain, and arthroscopic subcoracoid decompression (coracoplasty) is the preferred treatment in recalcitrant cases. The purpose of the present study was to evaluate the effect of coracoplasty on the severity of anterior shoulder pain and the strength of the subscapularis muscle and to correlate it with the preoperative and postoperative coracohumeral distance (CHD) (t:transverse, s:sagittal). Sixteen patients without any subscapularis tendon tears who underwent arthroscopic subcoracoid decompression and rotator cuff repair with 2 years follow-up were included. Preoperative and postoperative 2-year assessments of function and pain were performed using the modified Kennedy-Hawkins test, power grading of various subscapularis muscle tests, and ASES scores. Preoperative and postoperative coracohumeral distance (tCHD, sCHD) and coracoid overlap (CO) were measured using MRIs before and after surgery. The Mean Hawkins pain score and coracoid overlap were decreased. The strength scores for subscapularis strength testing, ASES score, maximum degree of internal rotation, and coracohumeral distance increased (P < .05). Changes in belly press strength were negatively correlated with postoperative tCHD (r = -0.6, P = .04) and postoperative sCHD (r = -0.7, P = .008). A significant increase in the internal rotation range of the shoulder, subscapularis strength, and relief of anterior shoulder pain was observed. However, this increase was inversely proportional to the postoperative CHD, indicating the mechanical effect of the coracoid on subscapularis strength.

Factors affecting medium-term patient satisfaction after arthroscopic repair of small to medium-sized rotator cuff tears: An observational study.

This study aimed to assess the effect of the status of the tendon and patient factors on patient satisfaction after rotator cuff repair. Forty-six patients treated for tears with a minimum of 5-year follow-up were included. Gender, age, and active smoking status were recorded. Pain visual analogue scale, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, Simple Shoulder Test, and Single Assessment Numeric Evaluation were recorded preoperatively and at the last follow-up. Patients were divided into groups of highly satisfied (HS) and vaguely satisfied (VS) patients. Patients were evaluated with MRI both preoperatively and at their last follow-up. Of the 46 patients, 17 were HS and 29 were VS. The HS group had 7 re-ruptures, 4 of which were progressed tears, whereas the VS group had 15 re-ruptures, 4 of which were progressed tears. There was no difference in the rate of re-ruptures or progressed tears between groups. The HS group had a higher frequency of males. However, frequencies of active smoking or osteoarthritis of grade 2 or higher were lower in the HS group. It was shown that patient satisfaction after repair depends on patient-related factors like gender and smoking rather than tendon healing or degeneration.

Effect of cam resection depth on clinical outcomes after primary hip arthroscopy.

BACKGROUND: The amount of resection or the starting point of the resection on the femoral head for cam lesions in femoroacetabular impingement (FAI) is controversial. AIM: The purpose of this study was to study the effect of postoperative resection depth, and resection arc ratio of cam lesion on the frequency of achieving substantial clinical benefit (SCB), patient acceptable state (PASS) in modified Harris Hip Score (mHHS) and Hip Outcome Score Activity of Daily Living (HOSADL), 2 years postoperatively. PATIENTS AND METHODS: All patients who underwent first-time hip arthroscopy for FAI with a 2-year follow-up were included in this study. Patient-reported outcomes included the mHHS, HOSADL, and visual analogue scale for pain (Pain VAS). Radiological parameters such as alpha angletraditional (αT), alpha anglecartilage (αC), resection arc ratio (% alpha anglecartilage-alpha angletraditional/360°), resection depth (''D''mm) and resection depth ratio 'D%' (D/femoral head diameter %) were measured using the 45° Dunn view. RESULTS: We identified 26 patients (27 hips) with 2-year follow-up. There were 10 female and 16 male patients. The mean age of the patients was 33 ± 12 years.Higher frequency of achieving SCB threshold for mHHS was related to labrum repair (73% vs. debridement '27%' p = 0.03), lower preoperative αT (64° vs. 76°, p = 0.04), lower preoperative mHHS (54 vs. 81, p < 0.001) and higher preoperative VAS scores (8 vs. 7, p = 0.02). Higher frequency of reaching PASS threshold for mHHS was associated with lower αC (82°vs. 92° p:0.02), lower RA (8% vs. 11%, p = 0.03), lower D (2.8 mm vs. 4.5 mm p:0.03), lower D% (4.7% vs. 8.4% p = 0.04) and higher postoperative mHHS (97 vs. 82 p < 0.001). CONCLUSIONS: A higher frequency of achieving SCB for HOSADL was related to lower D% (5% vs. 10.5%, p = 0.04).Cam resection depth affects the frequency of achieving clinically meaningful scores and resection depth less than 6% of the femoral head diameter seems to be appropriate for optimal results. The starting point of resection on head cartilage needs to be <90° when alpha angle is used for reference.

Anatomic footprint of the direct head of the rectus femoris origin: cadaveric study and clinical series of hips after arthroscopic anterior inferior iliac spine/subspine decompression.

PURPOSE: The purposes of this study were to define the anatomy of the anterior inferior iliac spine (AIIS) and its relation to the footprint of the rectus femoris tendon and to evaluate on the clinical outcomes after AIIS/subspine decompression. METHODS: The rectus origin was dissected and detached in 11 male cadaveric hips with a mean age of 54.3 ± 14.3 years (range, 33 to 74 years). The proximal-distal and medial-lateral extent of the footprint and its relation to the AIIS and acetabular rim were evaluated, with the 12-o'clock position defined as directly lateral at the insertion of the indirect head of the rectus tendon and the 1- to 6-o'clock positions defined as anterior acetabular positions. To assess the safety and efficacy of subspine decompression for AIIS deformity, clinical correlation of a series of 163 AIIS decompressions (mean age, 27.8 years; age range, 14 to 52 years) performed from January 2011 to January 2012 was completed, and outcome scores, strength deficits, and ruptures were assessed by manual muscle testing and postoperative radiographs. All patients presented with symptomatic FAI with proximal femoral and/or acetabular deformity and type 2 (131 hips) or type 3 (32 hips) AIIS morphology as defined by Hetsroni et al. RESULTS: The mean proximal-distal and medial-lateral distances for the rectus origin footprint were 2.2 ± 0.1 cm (range, 2.1 to 2.4 cm) and 1.6 ± 0.3 cm (range, 1.2 to 2.3 cm), respectively. There was a characteristic bare area at the anteromedial AIIS. On the clock face, the lateral margin (1-o'clock to 1:30 position) and medial margin (2-o'clock to 2:30 position) of the AIIS and the indirect head of the rectus (12 o'clock) were consistent for all specimens. In the clinical series, 163 AIIS decompressions were performed for symptomatic subspine impingement. The mean modified Harris Hip Score was 63.1 points (range, 21 to 90 points) preoperatively compared with 85.3 points (range, 37 to 100 points) at a mean follow-up of 11.1 ± 4.1 months (range, 6 to 24 months) (P < .01). Short Form 12 scores improved significantly from a mean of 70.4 (range, 34 to 93) preoperatively to a mean of 81.3 (range, 31 to 99) postoperatively (P < .01). The mean pain score on a visual analog scale also improved significantly from a mean of 4.9 (range, 0.1 to 8.6) preoperatively to a mean of 1.9 (range, 0 to 7.8) postoperatively (P < .01). The mean alpha angle improved from 61.5° (range, 35° to 90°) preoperatively to 49° (range, 35° to 63°) postoperatively on anteroposterior radiographs and from 71° (range, 45° to 90°) preoperatively to 44.3° (range, 37° to 60°) postoperatively on lateral radiographs. No short- or long-term hip flexion deficits or rectus femoris avulsions were noted with up to 2 years' follow-up. CONCLUSIONS: The origin of the rectus femoris tendon is broad on the AIIS and protective against direct head detachment with subspine decompression. This broad origin and consistent bare area anteromedially on the AIIS can be readily used by surgeons to perform a safe AIIS resection in cases of symptomatic impingement. Arthroscopic subspine decompression in addition to osteoplasty for symptomatic cam- and/or pincer-type FAI deformities can reliably improve outcome scores without significant hip flexion deficits or AIIS/rectus femoris avulsions. CLINICAL RELEVANCE: The direct head of the rectus tendon has a broad insertion on the AIIS, and an area devoid of tendon provides a "safe zone" for subspine decompression in cases of symptomatic AIIS impingement.

Postoperative alpha angle seems to be important for the achievement of clinical significance at a minimum 5-year follow-up after primary hip arthroscopy.

The purpose of the present study was to clarify whether there is an association of postoperative alpha value with functional scores or progression of osteoarthritis at X-rays at the midterm after arthroscopic treatment of femoroacetabular impingement (FAI) syndrome with femoral osteoplasty, labral repair or debridement and rim trimming. A retrospective review of prospectively gathered data from 2013 to 2017 was performed. All patients who underwent first-time unilateral hip arthroscopy for FAI resection with 5-year follow-up were included. Patient-reported outcomes included the modified Harris Hip Score (mHHS) and Visual Analog Scale for Pain (Pain VAS). The progression of osteoarthritis (Tönnis grade) and radiological parameters (alpha angle, lateral center-edge angle [LCEA] and head-neck offset) were evaluated. A receiver operating characteristic (ROC) analysis was used to evaluate the correlation between significant variables and achievement of patient-acceptable symptomatic state (PASS) and degree of osteoarthritis. We identified 52 patients with a minimum 5-year follow-up (average, 6.7 years). The average patient age was 33.9 ± 11.5 years. There were 19 (36.5%) female patients. The mHHS improved from 60.1 ± 13.4 before surgery to 86.8 ± 14 after surgery (P < 0.001). The Pain VAS decreased from 6.21 before surgery to 2 after surgery (P < 0.001). Overall, 69% achieved the PASS for mHHS. The ROC curve for postoperative alpha angle demonstrated acceptable discrimination between patients achieving a fifth-year PASS value and those who did not have an area under the curve of 0.72. Patients having a postoperative alpha angle of ≤48.3° achieved the fifth-year PASS value at a significantly higher rate than patients having a postoperative alpha angle of >48.3° (P = 0.002). The postoperative alpha angle is a predictor of the achievement of the fifth-year PASS value for the mHHS. A threshold of ≤48.3° had a sensitivity of 0.75 and a specificity of 0.69 to predict positivity. Level of evidence IV.

The evaluation of a de novo biplanar distal humerus plate: A biomechanical study.

OBJECTIVES: The aim of this study was to compare the stability of a novel biplanar distal humerus plate with the single- and double-columns J-plating techniques. MATERIALS AND METHODS: Eighteen sawbones humera were divided into three groups. In Groups 1, 2 and 3, biplanar plate, single lateral J-plate and double J-plate, were used, respectively. Transverse osteotomies at the upper portion of the olecranon fossa were made. Blocks of 10-mm was removed from each sample. Axial, torsional, and extensional stiffness of each group were measured. RESULTS: The mean axial stiffness values in Groups 1, 2, and 3 were 64.80±6.75, 33.70±5.71, and 171.48±9.53 N/mm, respectively. Group 1 demonstrated a statistically significant difference compared to Group 2 (p=0.032), whereas Group 3 showed a statistically significant difference compared to Groups 1 and 2 (p=0.025 and p=0.014, respectively). The mean torsional stiffness values of Groups 1, 2, and 3 were 0.23±0.01, 0.14±0.008, and 0.30±0.007 N/ degree, respectively. Groups 1 and 3 demonstrated a statistically significant difference compared to Group 2 (p=0.042 and p=0.028, respectively). No statistically significant difference was detected between Groups 1 and 3 (p=0.27). The mean extensional bending stiffness values of Groups 1, 2 and 3 were 2.64±0.31, 1.17±0.13, and 3.2±0.1 N/mm, respectively. Group 1 demonstrated a statistically significant difference compared to Group 2 (p=0.041). There was no statistically significant difference between Groups 1 and 3 (p=0.083). CONCLUSION: Biplanar plate allows applying enough numbers of long sagittal screws and offers more biomechanical stability than lateral column J-plate and in some aspects strong as dual J-plating in torsional and bending tests.

Computational analysis of the effects of interprosthetic distance on normal and reduced cortical thickness femur models.

Distal femoral fractures associated with the femoral stem in a well-fixed hip arthroplasty pose a risk of an interprosthetic fracture, the treatment of which is known as difficult. To effectively prevent and treat IP fractures, biomechanical effects must be demonstrated. We defined eight variations of the interprosthetic distance ranging from 48 mm overlap to 128 mm gap. Femoral geometries with normal and reduced cortical thickness were modeled to evaluate the effects of cortical thickness. In addition to the intact model, a total of 16 finite element models were analyzed under physiological boundary conditions. Maximum and minimum principal strains on the lateral and medial cortex surfaces were always found to be greater in models with reduced cortical thickness than in normal femurs. The model with 48 mm overlapping interprosthetic distance produced the least peak strain and the model with 16 mm interprosthetic gap produced the greatest strain with both normal and reduced cortical thickness. The screw holes produced local strain concentrations and increased the peak strains on the cortex surfaces, especially close to the stem tip. Statistically, a significant correlation (R2 = 0.9483) was found between strain shielding and interprosthetic distance. Axial stiffness, interfragmentary shear motion, and maximum von-Mises stress on the distal plate showed a high correlation with the interprosthetic distance. It was concluded that the overlapping structures are superior to other fixations we analyzed in that they offer better mechanical stability and eliminates the local strain concentrations.

Effects of degree of translation or rotation of acetabular fragment of periacetabular osteotomy procedure on pelvic X-ray parameters.

The present study aims to investigate the effect of amount of lateralization and/or anteversion of the point where the iliac cut meets with the posterior column cut of periacetabular osteotomy (PAO), on X-ray parameters such as Center of edge (CE) angle, retroversion index (RVI) and sharp angle. Fourteen patients with symptomatic hip dysplasia (CE° < 20°) were included. Pelvis Computerized tomography (CT) sections were used for 3D printing. PAO was then performed on these models. The point (A), 1 cm lateral to the pelvic brim, is marked where the iliac cut intersects the posterior column cut. In Group I (1.5-0), point A is lateralized parallel to the osteotomy line for 1.5 cm. In Group II (1.5-0.5), it is additionally anteverted for 0.5 cm. In Group III (3-0), point A is lateralized for 3 cm and then additionally anteverted for 1 cm (Group IV: 3-1). Radiographs were taken in each stage. The lateral CE angle, RVI and sharp angle were measured. All had an increase in the CE angle and RVI and a decrease in the sharp angle compared to the control group (P < 0.05). The amount of CE angle (ΔCE) or RVI increase (ΔRV) was as follows: 3-1(38°, 0.3) > 3-0(27°, 0.2) and 1.5-0.5(25°, 0.1) > 1.5-0(17°, 0.07) (P < 0.05) (with no difference between groups 1.5-0.5 and 3-0, P = 0.7). The amount of sharp angle decrease was as follows: 3-1(20°), 3-0(18°) < 1.5-0.5(11°) < 1.5-0(8°) (P < 0.05). The lateralization of the intersection point where the iliac wing cut meets with the posterior column cut along the cut surface led to an increase of lateral cover and focal retroversion. Additional anteversion leads to further increases in those parameters, while groups 1.5-0.5 and 3-0 did not differ between.

Three-Dimensionally-Printed Joint-Preserving Prosthetic Reconstruction of Massive Bone Defects After Malignant Tumor Resection of the Proximal Tibia.

Joint-preserving prosthetic reconstruction for massive bone defects has the potential to be a new and revolutionary treatment option. In this paper, we discuss the case of a 30-year-old female patient who presented with pain and swelling around the knee for three months. The patient underwent this procedure. Postoperative patient satisfaction, pain scores, and range of motion results were found to be promising. We believe that this method has the potential to be the next stage in the quest for better treatment options for this condition.

Biceps tenodesis combined with rotator cuff repair increases functional status and elbow strength.

PURPOSE: The aim of the present study was to prospectively evaluate the elbow flexion and supination strengths and the functional outcomes of patients following arthroscopic rotator cuff repair combined with simultaneous biceps tenodesis. METHODS: 19 patients who underwent arthroscopic rotator cuff repair and biceps tenodesis with at least 24 months of follow-up were included. Patients were evaluated using a visual analog scale (VAS) for bicipital groove pain, American Shoulder and Elbow Surgeons (ASES), and constant scores (CS), biceps apex distance (BAD), elbow flexion, and supination strengths. RESULTS: The VAS for biceps groove measurement averages in the postoperative 6th, 12th, and 24th months was lower in comparison to preoperative data and was considered to be statistically significant (p < .05). The constant score, an average of all postoperative measurements and scores, was found to be higher than preoperative values and was considered to be statistically significant (p < .01). There was a significant difference in the operated and non-operated forearm supination and elbow flexion muscle strength measurements at the postoperative 3- and 6-month follow-ups (p < .01). CONCLUSION: Arthroscopic biceps tenodesis into the anchors of the lateral row in combination with rotator cuff repair provides an increase in the strength of elbow flexion and forearm supination, while decreasing pain. LEVEL OF EVIDENCE: Level IV.

Bony landmarks, distances and their correlations to each other, which can be used during periacetabular osteotomy: a CT study performed on dysplastic hips.

As a surgical technique for hip dysplasia, Bernese periacetabular osteotomy (PAO) still poses technical difficulties and unclear surgical steps like the depth of the first 'ischial' cut, the start of the iliac cut and the width of the retroacetabular cut to prevent either iatrogenic joint entrance or posterior column fracture. Twenty-seven dysplastic hips (CE < 25°) were randomly matched with nondysplastic hips (n: 27, CE > 25°). 3D CT sections of the hips were evaluated and the width of the ischium, the distance from the infra-acetabular groove to the ischial spine, from the anterior superior iliac spine (ASIS) to the joint or sciatic notch or the sciatic spine, from the most medial point at the acetabulum to the posterior column, ischial spine or sciatic notch were measured for each group and correlated. The distances (mm) from the infra-acetabular groove to the ischial spine (42 ± 4, 44 ± 4, P: 0.03), the anterior superior iliac spine to the joint (52 ± 6, 60 ± 3, P: 0.03), the most medial point at the acetabulum to the posterior column (34 ± 2, 36 ± 2, P: 0.005) were shorter in the dysplastic group. The distance from the ASIS to the sciatic notch was correlated with the distance from the infra-acetabular groove to the ischial spine, from the ASIS to the joint and the most medial point at the acetabulum to the posterior column. The distance from the ASIS to the sciatic notch can be used intraoperatively to guess the X-ray guided or blindly osteotomized stages to predict the width or depth of the osteotomy to prevent intraarticular extension or posterior column fracture.

Cosmetic bilateral leg lengthening using intramedullary nail experience of 9 cases.

BACKGROUND: Distraction osteogenesis to correct deformity and limb-length discrepancy was defined by Ilizarov. Traditional distraction osteogenesis was made with circular external fixators or monolateral fixators commonly for deformity, and external fixators was related with pin site infections and pain due to soft-tissue transfixation. Nowadays, bone lengthening method is used with different intramedullary nail systems for cosmetic purposes. METHODS: From 2011 until 2018, a total of 9 patients (6 males and 3 females:16 femoral, 2 tibial), with constitutional short stature, to whom the intramedullary nail lengthening technique for cosmetic purposes had been applied, were retrospectively reviewed. The mean age was 28.3 while the mean height before the lengthening was 151 cm. RESULT: The mean lengthening gained in all patients were 8.7 cm. The mean follow-up period was 22 ± 11 months while the healing index with normal bone healing was 46.8 ± 16 months/cm. Complications that we noted were; insufficient bone regeneration (n = 2), quadriceps contracture (n = 1), proximal locking screw runaway (n = 1). CONCLUSION: Bone lengthening for aesthetic purposes with different nail systems can be very safe and beneficial to the patients improving their social capabilities and self-confidence. Yet, patients should be well informed about the complications and risks of the lengthening surgery.

Labral tears with axial plane disorders.

OBJECTIVES: This study aims to determine if there is an axial plane coverage insufficiency in patients with symptomatic labral tears compared to the contralateral asymptomatic side and healthy control subjects. PATIENTS AND METHODS: This retrospective study was conducted between December 2017 and January 2019. Thirty patients (21 males, 9 females; mean age 28 years; range, 20 to 36 years) operated due to unilateral symptomatic acetabular labral tears secondary to femoroacetabular impingement were evaluated. Twenty asymptomatic patients (13 males, 7 females; mean age 27±9 years; range, 19 to 36 years) were included in the control group. The relationship between acetabular morphology and labral tear was investigated with the comparison of unilateral symptomatic hips with contralateral asymptomatic hips and the control group by using radiological parameters on plain radiographs and computed tomography. RESULTS: When the patient group symptomatic side was compared to the control group, acetabular anteversion angle (A A A) and alpha (α) angle were higher, while posterior acetabular sector angle and horizontal acetabular sector angle were lower. When the asymptomatic side was compared to the control group, AAA was higher in the patient group. There was no difference between the symptomatic and asymptomatic sides in the patient group; the symptomatic side yielded a higher α; angle. CONCLUSION: Posterior axial plane coverage deficiency in combination with cam deformity (increased α angle) seems to play a role in the pathogenesis of symptomatic acetabular labral tears, even creating a side-to-side difference in some individuals.

Preoperative Mild Pericardial Effusion Is Associated With Perioperative Complications In Elderly Patients Following Hip Fracture Surgery.

Background: The prevalence and prognostic value of mild pericardial effusion (MPE) has not been examined in patients undergoing non-cardiac surgery. Our study aimed to assess the frequency and prognostic value of MPE in elderly patients undergoing surgery for hip fracture. Methods: This is a single center, and retrospective study including elderly patients who underwent hip fracture surgery. The medical records of all patients, aged ≥65 years with femoral neck, intertrochanteric or subtrochanteric hip fracture undergoing surgery (intramedullary hip screw, sliding compression hip screw, hemiarthroplasty, or total hip arthroplasty) from June 2014 to June 2019 were analyzed. Patients with of multiple trauma and accidents were excluded. The MPE was defined as the presence of <10 mm pericardial effusion. The primary outcomes of the study were perioperative adverse medical events and length of stay in hospital. Results: A total of 462 patients (mean age 75.2 ± 11.7 years, and 53.5% female) were enrolled. MPE was detected in 72 patients (15.6%), and 62 patients (13.4%) experienced perioperative adverse medical events. Patients with MPE were older, had higher prevalence of diabetes, coronary artery disease, and heart failure, and had longer length of stay compared to patients without MPE. Univariate analysis showed a significant association between age, diabetes, coronary artery disease, American Society of Anesthesiologists status, MPE, and perioperative adverse events. After adjustment for age, demographics, and medical history, the presence of MPE remained as significant variable associated with perioperative complications (OR: 2.543, 95% CI: 1.173-3.469, p = 0.003). Conclusion: Our study is the first to demonstrate that the presence of MPE is associated with perioperative adverse events in elderly patients undergoing hip fracture surgery.

Late treatment of obstetrical brachial plexus palsy by humeral rotational osteotomy and lengthening with an intramedullary elongation nail.

To date, all the authors who have recommended external rotation osteotomy (ERO) in the late treatment of obstetrical brachial plexus palsy (OBPP), have neglected upper limb length discrepancy, which is an another sequelae of OBPP. In this paper, a new technique is reported for the late treatment of OBPP patients with upper limb length discrepancy, in which both humeral external rotation osteotomy (ERO) and lengthening are applied with an intramedullary elongation nail. With this technique, upper limb function is improved through re-orientation of the shoulder arc to a more functional range, and further improvements will be seen in the appearance of the upper limb with the elimination of length discrepancy. It is also advocated that there is a potentiating effect of the humeral lengthening on shoulder movements gained by ERO when the osteotomy is applied above the deltoid insertion, as this allows more lateralized placement of the deltoid insertion.