Environmentally friendly cellulose-based polyelectrolytes in wastewater treatment.

Natural-based polyelectrolytes (PELs), with all the advantages coming from being produced from renewable and biodegradable sources, are a potential solution for the removal of dyes from wastewater. In this work, surplus Eucalyptus bleached cellulose fibres from a paper mill were modified to increase the charge and solubility of cellulose. First, reactive aldehyde groups were introduced in the cellulose backbone by periodate oxidation of cellulose. Further modification with alkylammonium produced positively charged cellulose-based PELs. The final products were characterized by several analytical techniques. The PEL with the highest substitution degree of cationic groups was evaluated for its performance in decolouration processes, bentonite being used as aid. This was found to be effective for colour removal of either anionic or cationic dyes. Bio-PELs can thus be considered as very favourable eco-friendly flocculation agents for decolouration of harsh effluents from several industries, considering their biodegradable nature and thus the ability to produce less sludge.

Nanocelluloses and Their Applications in Conservation and Restoration of Historical Documents.

Nanocelluloses have gained significant attention in recent years due to their singular properties (good biocompatibility, high optical transparency and mechanical strength, large specific surface area, and good film-forming ability) and wide-ranging applications (paper, food packaging, textiles, electronics, and biomedical). This article is a comprehensive review of the applications of nanocelluloses (cellulose nanocrystals, cellulose nanofibrils, and bacterial nanocellulose) in the conservation and restoration of historical paper documents, including their preparation methods and main properties. The novelty lies in the information collected about nanocelluloses as renewable, environmentally friendly, and sustainable materials in the field of cultural heritage preservation as an alternative to conventional methods. Several studies have demonstrated that nanocelluloses, with or without other particles, may impart to the paper documents excellent optical and mechanical properties, very good stability against temperature and humidity aging, higher antibacterial and antifungal activity, high protection from UV light, and may be applied without requiring additional adhesive.

Rheology of Suspensions of TEMPO-Oxidised and Cationic Cellulose Nanofibrils-The Effect of Chemical Pre-Treatment.

Cellulose nanofibrils (CNFs) are particles with a high aspect ratio. Typically, chemically pre-treated CNFs (containing anionic or cationic charged groups) consist of long fibrils (up to 2 µm) with very low thickness (less than 10 nm). Derived from their high aspect ratio, CNFs form strong hydrogels with high elasticity at low concentrations. Thus, CNF suspensions appear as an interesting rheology modifier to be applied in cosmetics, paints, foods, and as a mineral suspending agent, among other applications. The high viscosity results from the strong 3D fibril network, which is related to the good fibrillation of the material, allowing the nanofibrils to overlap. The overlap concentration (c*) was found to vary from ca. 0.13 to ca. 0.60 wt.% depending on the type and intensity of the pre-treatment applied during the preparation of the CNFs. The results confirm the higher tendency for the fibres treated with (3-chloro-2-hydroxypropyl) trimethylammonium chloride (CHPTAC) and 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) to form a 3D network, resulting in the lowest c*. For the TEMPO-oxidised CNF suspensions, it was also found that aggregation is improved at acidic pH conditions due to lower charge repulsion among fibrils, leading to an increase in the suspension viscosity as well as higher apparent yield stresses. TEMPO CNF suspensions with a low content of carboxylic groups tend to precipitate at moderately acidic pH values.

Anionic bio-flocculants from sugarcane for purification of sucrose: An application of circular bioeconomy.

In sugar production, polyacrylamide-based anionic flocculants are added for juice treatment, the main objective being to remove impurities that affect the quality of the sugar. However, if they remain in the final product, those polymers can present carcinogenic and neurotoxic actions besides contaminating the soils where the waste is discharged. To overcome this problem, the present study proposes, for the first time, natural flocculants based on cellulose obtained from sugarcane bagasse (residue from sugarcane processing) as substitutes for the flocculants based on polyacrylamide, normally used in sugar cane juice purification. Additionally, cellulose-based flocculants obtained from Acacia wood, developed in a previous study, have also been tested for sugar juice treatment. Acacia wood and sugarcane bagasse were first treated with a choline chloride/levulinic acid solution in a molar ratio of 1:2, at 160 °C, for 4 h. Subsequently, the cellulose-rich samples were modified by a two-stage process (oxidation with sodium periodate followed by reaction with sodium metabisulfite), and polyelectrolytes with different characteristics were produced. The final products obtained were characterized, and their performance in the treatment of sugarcane juice, at different concentrations (10, 50, 100, 250, and 500 mg kg-1), was evaluated and compared to the synthetic commercial flocculant (Flonex, based on polyacrylamide) usually used by the sugarcane industry in Brazil. The substitution of petrol-based flocculants by natural-based ones, obtained from sugarcane residues, is presented for the first time in this study, with very relevant performance of the new flocculants. Overall, it was possible to produce anionic flocculants, modifying the cellulose obtained from different raw materials, which showed good results in the purification of sucrose, when compared with the commercial polyacrylamide normally used. It is also important to stress that, for the first time, a residue from sugarcane industry could be used with success in the purification of the sugar juice itself, which constitutes a major novelty.

Impact of bacterial cellulose on the physical properties and printing quality of fine papers.

Bacterial nanocellulose (BNC), due to its inherent nanometric scale and strength properties, can be considered as a good candidate to be used in papermaking. This work explored the possibility of using it in the production of fine paper as a wet-end component and for the paper coating. Filler-containing handsheet production was performed with and without the presence of common additives typically used in the furnish of office papers. It was found that, under optimized conditions, BNC mechanically treated by high-pressure homogenization could improve all the evaluated paper properties (mechanical, optical and structural) without impairing the filler retention. However, paper strength was improved only to a small extent (increase in the tensile index of 8 % for a filler content of ca. 27.5 %). On the other hand, when used at the paper surface, remarkable improvements in the gamut area of >25 % in comparison to the base paper and of >40 % in comparison to starch-only coated papers were achieved for a formulation having 50 % BNC and 50 % of carboxymethylcellulose. Overall, the present results highlight the possibility of using BNC as a paper component, particularly when applied at the paper substrate as a coating agent aiming at improving printing quality.

High-performance delignification of invasive tree species wood with ionic liquid and deep eutectic solvent for the production of cellulose-based polyelectrolytes.

An efficient and eco-friendly process for lignocellulosic biomass fractionation is essential for the production of high value-added bioproducts from biomass. The present work aimed to obtain cellulose-rich materials from the wood of an invasive tree species (Acacia dealbata) using an appropriate choice of ionic liquids (ILs) and deep eutectic solvents (DESs), and of the processing conditions, for the subsequent production of cationic wood-based polyelectrolytes. In the pretreatment step, the 1-butyl-3-methylimidazolium methyl sulfate (IL) + H2O and choline chloride + imidazole (DES) systems demonstrated a remarkable ability to remove lignin from acacia, reaching up to 92.4 and 90.2% of delignification, respectively. However, the DES pretreatment revealed to be more selective for lignin removal with lower cellulose losses (less than 15%) than the IL treatment (up to 30%) and less cellulose depolymerization. The hemicellulose was also removed but in a lesser extent with the DES treatment. Both systems could provide treated materials with a very high cellulose content (≥89%). Afterwards, cationic polyelectrolytes having a considerable content of quaternary ammonium groups (up to 3.6 mmol g-1) were obtained directly from the IL- and DES-pretreated woods. The treated woods, when used as raw materials for cationization reaction, allow to synthesize water-soluble polyelectrolytes with potential to be applied in wastewater treatment, pharmaceutical or cosmetic products.

Acacia Wood Fractionation Using Deep Eutectic Solvents: Extraction, Recovery, and Characterization of the Different Fractions.

The selective extraction and recovery of different lignocellulosic molecules of interest from forestry residues is increasing every day not only to satisfy the needs of driving a society toward more sustainable approaches and materials (rethinking waste as a valuable resource) but also because lignocellulosic molecules have several applications. For this purpose, the development of new sustainable and ecologically benign extraction approaches has grown significantly. Deep eutectic solvents (DESs) appear as a promising alternative for the processing and manipulation of biomass. In the present study, a DES formed using choline chloride and levulinic acid (ChCl:LA) was studied to fractionate lignocellulosic residues of acacia wood (Acacia dealbata Link), an invasive species in Portugal. Different parameters, such as temperature and extraction time, were optimized to enhance the yield and purity of recovered cellulose and lignin fractions. DESs containing LA were found to be promising solvent systems, as the hydrogen bond donor was considered relevant in relation to lignin extraction and cellulose concentration. On the other hand, the increase in temperature and extraction time increases the amount of extracted material from biomass but affects the purity of lignin. The most promising DES system, ChCl:LA in a ratio of 1:3, was found to not significantly depolymerize the extracted lignin, which presented a similar molecular weight to a kraft lignin. Additionally, the 31P NMR results revealed that the extracted lignin has a high content of phenolic OH groups, which favor its reactivity. A mixture of ChCl:LA may be considered a fully renewable solvent, and the formed DES presents good potential to fractionate wood residues.

Polyoxometalate/laccase-mediated oxidative polymerization of catechol for textile dyeing.

The synergistic effect between polyoxometalates (POMs), namely K(5)[SiW(11)V(V)O(40)]·11H(2)O and H(5)[PMo(10)V(V) (2)O(40)]·13H(2)O and laccase from ascomycete Myceliophthora thermophila has been employed for the first time in oxidative polymerization of catechol. Such a laccase-mediator system allowed the formation of a relatively high molecular weight polycatechol as confirmed by size exclusion chromatography and electrospray ionization mass spectrometry (ESI-MS) (3990 Da when using K(5)[SiW(11)V(V)O(40)]·11H(2)O and 3600 Da with H(5)[PMo(10)V(V) (2)O(40)]·13H(2)O). The synthesized polymers were applied as dyes for the dyeing of flax fabrics. The color intensity of flax fabrics colored with polymer solutions was evaluated by diffuse reflectance spectrophotometry via k/s measurements (+10% of fixation ratio). A new synthetic process allowed a dyeing polymer, provided upon flax coloration, better color fixation and color resistance when compared to that obtained by conventional synthesis with laccase solely or with addition of organic mediator (1-hydroxybenzotriazole).

Comparison of Surface Properties of Sepiolite and Palygorskite: Surface Energy and Nanoroughness.

The surface properties of two sepiolite samples and one palygorskite sample were compared using inverse gas chromatography (IGC). Samples were previously conditioned at appropriate temperatures for the removal of all zeolitic water. Dispersive (or Lifshitz-van der Waals) component of the surface energy (γsd), specific interactions (-ΔGas) with π electron donor bases (1-alkenes), and nanomorphology indices (IMχT) based on the injections of cycloalkanes and a branched alkane were measured. From IGC data, at 240 °C, it was found that the palygorskite was clearly distinguished from the sepiolites. The palygorskite possessed a lower γsd, larger -ΔGas with 1-alkenes, and remarkably higher IMχT. Slight differences could also be observed between the two sepiolite samples with the same origin. The results were rationalized in terms of the structural features of the two studied minerals. The larger channels of the sepiolite allow for a better insertion of the n-alkanes (longer retention times) while excluding the bulkier probes, such as cyclooctane or 2,2,4-trimethylpentane. Accordingly, the corresponding γsd values were larger and the IMχT values were lower (higher surface nanoroughness) for the sepiolites. Regarding Lewis acid-base properties, all the sample's surfaces evidenced a very strong amphoteric character. The present results highlight the potential of the evaluated samples for, e.g., adsorption processes with volatile organic compounds or matrix-filler interactions regarding the production of composite structures with Lewis acid-base matrices.

Characterization of Two Cactus Formulation-Based Flocculants and Investigation on Their Flocculating Ability for Cationic and Anionic Dyes Removal.

Dye invasion in wastewaters is undeniably one of the crucial environmental concerns in addition to the supplement of toxic synthetic chemical flocculants used for color removal using the conventional coagulation-flocculation process. With the aim to improve the flocculation stage in terms of reagents safety and ensure dyes removal, the present study explores the flocculating effectiveness of two natural, stable, and eco-friendly cactus formulations, namely 60 °C oven-dried (DP) and lyophilized (LP) cladodes. Both formulations were assessed to treat cationic (Methylene blue; MB) and anionic (Methyl Orange; MO) dye solutions as a substitution attempt for the currently questioned employed synthetic chemical flocculants. Obtained results demonstrate that, in conjunction with alum as coagulant, the lyophilized powder (LP) bio-based flocculant appears to be the most efficient cactus formulation, showing a significant color (83%) and a turbidity (69%) abatement for the cationic dye (MB) and, respectively, 63% and 62% for the anionic one (MO). Additionally, the flocculation activity of the LP formula remained high over an eight-month period of storage. Moreover, based on the Fourier transform infrared (FTIR) spectroscopic analysis and the chemical characterization of cactus formulations, the occurring flocculation mechanisms of the dye removal are presumed to be based on both adsorption and bridging phenomena. Further, the significant color and turbidity decline achieved upon the addition of the lyophilized cactus cladodes powder (LP), enhancing thus the coagulation performance of the alum-based coagulant, proved the effectiveness of this bio-flocculant compared to the commonly used chemical flocculant (polyacrylamide). Hence, it was suggested that lyophilized cactus cladodes as a natural flocculant could be one of the effective surrogates to chemical flocculants conventionally used in wastewater treatment for the sake of a safer and sustainable environment.

Evaluation of Anionic and Cationic Pulp-Based Flocculants With Diverse Lignin Contents for Application in Effluent Treatment From the Textile Industry: Flocculation Monitoring.

In wastewater treatment, flocculation is a widely used solid/liquid separation technique, which typically employs a charged polymer, a polyelectrolyte (PEL). Polyelectrolytes features, such as charge type, charge density and molecular weight, are essential parameters affecting the mechanism of flocculation and subsequent floc sedimentation. The effectiveness of the process is also influenced by the characteristics of the system (e.g., type, size, and available surface area of suspended particles, pH of the medium, charge of suspended particles). Thus, a good understanding of the flocculation kinetics, involved mechanisms and flocs structure is essential in identifying the most adequate treatment conditions, having also into consideration possible subsequent treatments. In this study, Eucalyptus bleached pulp and a cellulosic pulp with high lignin content (~4.5 wt%) obtained from Eucalyptus wood waste were used for bio-PELs production. Firstly, a pre-treatment with sodium periodate increased the pulps reactivity. To produce cationic cellulose the oxidation step was followed by the introduction of cationic groups in the cellulose chains, through reaction with Girard's reagent T. Applying different molar ratios (0.975 and 3.9) of Girard's reagent T to aldehyde groups led to cationic PELs with diverse charge density. On the other hand, to obtain anionic cellulose a sulfonation reaction with sodium metabisulfite was applied to the intermediate dialdehyde cellulose-based products, during 24 or 72 h, and anionic-PELs with diverse features were obtained. The developed water soluble, anionic and cationic bio-PELs were characterized and tested as flocculation agents for a textile industry effluent treatment. Initially, jar-tests were used to tune the most effective flocculation procedure (pH, flocculant dosage, etc.). Flocculation using these conditions was then monitored continuously, over time, using laser diffraction spectroscopy (LDS). Due to the small size of the dyes molecules, a dual system with an inorganic complexation agent (bentonite) was essential for effective decolouration of the effluent. Performance in the treatment was monitored first by turbidity removal evaluation (75-88% with cationic-PELs, 75-81% with anionic-PELs) and COD reduction evaluation (79-81% with cationic-PELs, 63-77% with anionic-PELs) in the jar tests. Additionally, the evolution of flocs characteristics (structure and size) during their growth and the flocculation kinetics, were studied using the LDS technique, applying the different PELs produced and for a range of PEL concentration. The results obtained through this monitoring procedure allowed to discuss the possible flocculation mechanisms involved in the process. The results obtained with the bio-PELs were compared with those obtained using synthetic PELs, commonly applied in effluents treatment, polyacrylamides. The developed bio-PELs can be competitive, eco-friendly flocculation agents for effluents treatment from several industries, when compared to traditional synthetic flocculants with a significant environmental footprint. Moreover, LDS proved to be a feasible technique to monitor flocculation processes, even when a real industrial effluent is being tested.

Up-scaling of tannin-based coagulants for wastewater treatment: performance in a water treatment plant.

Tannin extracts from the bark of Acacia mearnsii and wood of Schinopsis balansae, commonly known as Quebracho, were employed. These were modified at laboratory sale via the Mannich aminomethylation with formaldehyde and dimethylamine hydrochloride. Some reaction conditions were varied, namely the formaldehyde dosage and reaction time, while keeping the Mannich solution activation time constant, and their influence on the shear viscosity of the created bio-coagulants was evaluated. The effect of the final pH of the products on their shear viscosity was also analyzed. Up-scaling of the Mannich reaction for tannin from South Africa was performed and the procedure developed at 1-L scale was reproducible in upscaled conditions. One example of a modified South Africa tannin and the modified Quebracho tannin was subsequently selected for the treatment of an industrial wastewater and tested for color and turbidity reduction in jar tests. The effluent treatment was carried out in a single and dual system with cationic synthetic flocculation agents of different charge degree. Good turbidity and decoloration results (93 and 89% reduction, respectively) were obtained with the simultaneous introduction of a cationic, 40% charged polyacrylamide, with minimal dosage (5 ppm) of the latter additive. The tannin-based coagulant from Acacia mearnsii was successfully applied in dual system with cationic polyacrylamide flocculant for industrial wastewater treatment at pilot plant scale. It was shown to satisfactorily treat the water and generate less sludge.

Evaluation of Anionic Eco-Friendly Flocculants Prepared from Eucalyptus Pulps with Diverse Lignin Contents for Application in Effluent Treatment.

Modification of cellulosic-rich materials for the production of cellulose-based polyelectrolytes (PELs) can bring several benefits, such as high biodegradability and low or no toxicity, for numerous applications, when compared with the use of traditional, synthetic PELs. Moreover, cellulose-based PELs originating from wood wastes, contribute to the valorisation of such wastes. In this work, Eucalyptus pulps with diverse lignin contents, extracted from Eucalyptus wood wastes, were anionized by a two-step reaction procedure (periodate oxidation followed by sulfonation). Applying different reaction times (24-144 h) in the sulfonation step allowed for producing a range of cellulose-based anionic polyelectrolytes with different characteristics. PELs obtained after 24 and 72 h of sulfonation were thoroughly characterized (Fourier transform infrared and 1H nuclear magnetic resonance spectroscopies, zeta potential and degree of substitution (elemental analysis) and hydrodynamic diameter (dynamic light scattering)) and subsequently evaluated as flocculants in decolouration processes of model effluents (Methylene Blue and Crystal Violet) and an industrial effluent from a textile industry. Furthermore, possible flocculation mechanisms induced by the use of the various PELs are discussed. Results are compared with those obtained with a commonly applied, synthetic flocculant (polyacrylamide). It is demonstrated that it was possible to obtain water-soluble lignocellulosic PELs starting from raw materials with different degrees of purity and that those PELs are promising eco-friendly alternative flocculation agents for the decolouration of effluents.

Stabilization of Palygorskite Aqueous Suspensions Using Bio-Based and Synthetic Polyelectrolytes.

Palygorskite is a natural fibrous clay mineral that can be used in several applications, for which colloidal stability in aqueous suspensions is a key point to improve its performance. In this study, methods of magnetic stirring, high-speed shearing, and ultrasonication, as well as different chemical dispersants, combined with these methods, namely carboxymethylcellulose, alginate, polyphosphate, and polyacrylate, were used to improve the dispersibility and the formation of stable suspensions of palygorskite in different conditions of pH. The stability and particle size of suspensions with a low concentration of palygorskite were evaluated by visual inspection, optical and electron microscopy, dynamic light scattering, and zeta potential measurements. Moreover, the palygorskite used in this work was initially characterized for its mineralogical, chemical, physical, and morphological properties. It was found that more stable suspensions were produced with ultrasonication compared to the other two physical treatments, with magnetic stirring being inefficient in all tested cases, and for higher pH values (pH of 12 and pH of 8, the natural pH of the clay) when compared to lower pH values (pH of 3). Remarkably, combined with ultrasonication, carboxymethylcellulose or in a lesser extent polyphosphate at near neutral pH allowed for the disaggregation of crystal bundles of palygorskite into individualized crystals. These results may be helpful to optimize the performance of palygorskite in several domains where it is applied.

A new formaldehyde optical sensor: Detecting milk adulteration.

A sensor consisting of an optical fibre with the exposed tip coated with the polyoxometalate salt [(C4H9)4N]4H[PMo10V2O40], specially designed to be insoluble in water, which UV-Vis spectrum changed in contact with formaldehyde, is presented. The sensor limit of detection for formaldehyde was 0.2 mg L-1, and the limit of quantification was 0.6 mg L-1, which were close to the conventional spectrophotometric method values of 0.2 mg L-1 and 0.5 mg L-1, respectively, and lower than the tolerable limit for ingested food. The sensor was tested for formaldehyde quantification in milk, as its deliberate addition is a matter of concern. The results obtained analysing formaldehyde in milk samples by the optical sensor and by the conventional method were not statistically different (α = 0.05).

Enzymatic nanocellulose in papermaking - The key role as filler flocculant and strengthening agent.

Nanocelluloses have been increasingly used in composites since their reduced size, high aspect ratio and stiffness confer great strength to the materials. In papermaking, it has been proved that harsh and expensive chemical pre-treatments to generate nanofibrils, such as TEMPO-mediated oxidation, are not the most favourable and therefore the use of cellulose microfibrils (CMF) have gained extra attention, especially those produced with the aid of enzymatic hydrolysis. In the present work, strategies to improve filler flocculation and the papermaking properties, by using enzymatic CMF, are provided. The CMF degree of polymerization was found to be directly related to precipitated calcium carbonate flocculation, leading to higher retentions in the fibre matrix. Besides, the paper dry and wet strengths were much improved, allowing in return the production of high-filler loaded handsheets with reduced requirements for common paper additives.

Cationization of Eucalyptus wood waste pulps with diverse lignin contents for potential application in colored wastewater treatment.

Modification of cellulosic-rich materials such as Eucalyptus wood waste and production of cellulose-based polyelectrolytes (PELs) presents several advantages for a variety of applications, when compared to the utilization of synthetic PELs, due to the nature, availability, high biodegradability and low or no toxicity of cellulosic materials. Moreover, valorization of the cellulosic waste itself to provide end products with higher added value is also an important aspect. In the present work, the objective was to evaluate the possibility of cationizing more complex and heterogeneous chemical pulps, obtained from Eucalyptus wood waste, with different cellulose purity and a relatively high lignin content (up to 4.5%). A two-step reaction (with sodium periodate and Girard's reagent T) was employed and a range of cellulose-based cationic polyelectrolytes were produced with different degrees of substitution. The final products were characterized by several analytical techniques and the bio-PELs with the highest and the lowest substitution degree by cationic groups were evaluated in a new application, as flocculants in the decoloration of model effluents, bentonite having been used as an inorganic aid. Also, possible mechanisms of flocculation were discussed and the results compared with those of a synthetic flocculant, often used in these treatments, cationic polyacrylamide. Lignocellulosic-PELs proved to be very favorable eco-friendly flocculation agents for the decoloration of dye-containing waters with potential application in several industries.

Determination of 5-hydroxymethylfurfural in honey, using headspace-solid-phase microextraction coupled with a polyoxometalate-coated piezoelectric quartz crystal.

High concentrations of 5-hydroxymethylfurfural (HMF) in honey provide an indication of overheating under inappropriate storage conditions or aging. Conventional methods for determining HMF are cumbersome and require expensive equipment or hazardous reagents. Hence the aim of this study was to propose a new analytical tool for HMF determination in honey, using a low cost acoustic wave sensor. Volatile organic compounds (VOCs) of honey samples were extracted, using the solid phase microextraction (SPME) technique, and HMF was quantified, using a piezoelectric quartz crystal with gold electrodes coated with a layer of decamolybdodivanado phosphoric acid, sensitive to HMF. The reliability of the proposed method was confirmed after comparing the results of HMF quantification with those obtained by the conventional spectrophotometric White method, and no statistical differences were found (α=0.05).

On the morphology of cellulose nanofibrils obtained by TEMPO-mediated oxidation and mechanical treatment.

The morphological properties of cellulose nanofibrils obtained from eucalyptus pulp fibres were assessed. Two samples were produced with the same chemical treatment (NaClO/NaBr/TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical) oxidation), but distinct mechanical treatment intensities during homogenization. It was shown that the nanofibrils production yield increases with the mechanical energy. The effect of mechanical treatment on the yield was confirmed by laser profilometry of air-dried nanocellulose films. However, no significant differences were detected regarding the nanofibrils width as measured by atomic force microscopy (AFM) of air-dried films. On the other hand, differences in size were found either by laser diffraction spectroscopy or by dynamic light scattering (DLS) of the cellulose nanofibrils suspensions as a consequence of the differences in the length distribution of both samples. The nanofibrils length of the more nanofibrillated sample was calculated based on the width measured by AFM and the hydrodynamic diameter obtained by DLS. A length value of ca. 600 nm was estimated. The DLS hydrodynamic diameter, as an equivalent spherical diameter, was used to estimate the nanofibrils length assuming a cylinder with the same volume and with the diameter (width) assessed by AFM. A simple method is thus proposed to evaluate the cellulose nanofibrils length combining microscopy and light scattering methods.

Nanostructured bacterial cellulose-poly(4-styrene sulfonic acid) composite membranes with high storage modulus and protonic conductivity.

The present study reports the development of a new generation of bio-based nanocomposite proton exchange membranes based on bacterial cellulose (BC) and poly(4-styrene sulfonic acid) (PSSA), produced by in situ free radical polymerization of sodium 4-styrenesulfonate using poly(ethylene glycol) diacrylate (PEGDA) as cross-linker, followed by conversion of the ensuing polymer into the acidic form. The BC nanofibrilar network endows the composite membranes with excellent mechanical properties at least up to 140 °C, a temperature where either pure PSSA or Nafion are soft, as shown by dynamic mechanical analysis. The large concentration of sulfonic acid groups in PSSA is responsible for the high ionic exchange capacity of the composite membranes, reaching 2.25 mmol g(-1) for a composite with 83 wt % PSSA/PEGDA. The through-plane protonic conductivity of the best membrane is in excess of 0.1 S cm(-1) at 94 °C and 98% relative humidity (RH), decreasing to 0.042 S cm(-1) at 60% RH. These values are comparable or even higher than those of ionomers such as Nafion or polyelectrolytes such as PSSA. This combination of electric and viscoelastic properties with low cost underlines the potential of these nanocomposites as a bio-based alternative to other polymer membranes for application in fuel cells, redox flow batteries, or other devices requiring functional proton conducting elements, such as sensors and actuators.