RESUMO
Analyzing the orbital angular momentum (OAM) distribution of a vortex beam is critical for OAM-based applications. Here, we propose a deep residual network (DRN) to model the relationship between characteristics of the multiplexed OAM beam and their complex spectrum. The favorable experimental results show that our proposal can obtain both the intensity and phase terms of multiplexed OAM beams, dubbed complex spectrum, with a wide range of OAM modes, varying in intensity, phase ratio, and mode intervals at high accuracy and real-time speed. Specifically, the root mean square error (RMSE) of intensity and phase spectrum is evaluated as 0.002 and 0.016, respectively, with a response time of only 0.020â s. To the best of our knowledge, this work opens a new sight for fast OAM complex spectrum analysis and paves the way for numerous advanced domains that need real-time OAM complex spectrum diagnostic like ultrahigh-dimensional OAM tailoring.
RESUMO
We demonstrate the direct generation of single-frequency switchable orbital angular momentum (OAM) modes in a 1â µm wavelength range using a Nd:YVO4 microchip laser. The 808â nm laser diode pump beam is shaped into annular through an axicon associated with a lens. By adjusting the diameter and power of the annular pump beam, various OAM modes with different mode volumes can oscillate inside the Nd:YVO4 microchip. Moreover, a single-frequency output is also available due to the short cavity of the microchip. In the proof-of-principle experiment, single-frequency twofold multiplexed OAM modes | ± 1> and | ± 2> are generated, with experimentally measured fidelity higher than 96%. This work presents a compact and versatile single-frequency OAM source and will inspire multiple advanced scenarios ranging from classical to quantum photonics.
RESUMO
We have developed and experimentally investigated a long-range 1.645 µm coherent Doppler wind lidar (CDWL) system. A compact 1.645 µm single-frequency Er:YAG laser is utilized as the laser transmitter. The impact of laser transmitter parameters on wind detection was assessed using the figure of merit (FOM) concept. To enhance the measurement efficiency, the influence of wave aberrations on the heterodyne efficiency was analyzed. A Galilean telescope with an optical aperture of 100 mm is designed as the optical antenna based on the analysis. The line of sight (LOS) detection range exceeds 30.42 km with a data rate of 1 Hz at an elevation angle of 3.5°. To evaluate the effectiveness of the CDWL, comparison experiments were conducted between the 1.645 µm CDWL and a calibrated 1.55 µm CDWL, revealing a correlation coefficient of 0.9816 for the whole detection path in the wind velocity measurement.
RESUMO
1.6â µm high-order vortex modes carrying orbital angular momentums (OAMs) play significant roles in long-range Doppler lidars and other remote sensing. Amplification of 1.6â µm high-order vortex modes is an important way to provide high-power laser sources for such lidars and also enable the weak echo signal to be amplified so that it can be analyzed. In this work, we propose a four-pass Er:YAG vortex master-oscillator-power-amplification (MOPA) system to amplify 1.6â µm high-order vortex modes. In the proof-of-concept experiments, 1.6â µm single OAM mode (l = 3) is amplified successfully and the gain ranging from 1.88 to 2.36 is achieved. Multiplexed OAM mode (l=±3) is also amplified with favorable results. This work addresses the issue as the low gain of Er:YAG vortex MOPA, which provides a feasible path for 1.6â µm high-order vortex modes amplification.
RESUMO
A 1645-nm single-frequency vortex beam with narrow linewidth from an Er:YAG nonplanar ring oscillator (NPRO) using an annular pump beam is demonstrated. The pump beam from a 1532-nm fiber laser is shaped to an annular beam by an axicon. The Er:YAG NPRO generates a 1.96-W single-frequency vortex beam under a pump power of 13 W. The linewidth of the 1645-nm vortex laser is measured as 6 kHz. This work provides a convenient way of single-frequency vortex beam generation.
RESUMO
We report a single-frequency Q-switched Er:YAG all-solid-state laser with a pulse repetition rate of up to 10 kHz. The single-frequency feature is ensured by injecting the seed laser into a Q-switched ring cavity, and the pulse repetition rate is increased by combing the Pound-Drever-Hall method and optical feedback. Peak power of 4.12 kW with an average pulse energy of 1.35 mJ single-frequency 1645 nm laser pulses is achieved at a pulse repetition rate of 10 kHz, which matches an average power of 13.5 W.
RESUMO
Coherent Doppler wind lidar (CDWL) is used to measure wind velocity distribution by using laser pulses. However, the echo signal is easily affected by atmospheric turbulence, which could decrease the effective detection range of CDWL. In this paper, a variation modal decomposition based on honey badger algorithm (VMD-HBA) is proposed and demonstrated. Compared with conventional VMD-based methods, the proposed method utilizes a newly developed HBA to obtain the optimal VMD parameters by iterating the spectrum fitness function. In addition, the Correlation Euclidean distance is applied to identify the relevant mode and used to reconstruct the signal. The simulation results show that the denoising performance of VMD-HBA is superior to other available denoising methods. Experimentally, this combined method was successfully realized to process the actual lidar echo signal. Under harsh detection conditions, the effective detection range of the homemade CDWL system is extended from 13.41â km to 20.61â km.
RESUMO
Optical vortex array has drawn widespread attention since the boom of special applications such as molecular selecting and optical communication. Here, we propose an integrated phase-only scheme to generate multiple multiplexed vortex beams simultaneously, constituting a multiplexed vortex state array, where the spatial position, as well as the corresponding orbital angular momentum (OAM) spectrum, can be manipulated flexibly as desired. Proof-of-concept experiments are carried out and show a few different multiplexed vortex state arrays that fit well with the simulation. Moreover, regarding the array as a data-carrier, a one-to-many multicasting link through multi-state OAM shift keying, a high-dimensional data coding, is also available in free space. In the experiment, four various OAM states are employed and achieve four bits binary symbols, and finally distribute three different images to three separate receivers independently from the same transmitter, showing great potential in the future high-dimensional optical networks.
RESUMO
Beams carrying orbital angular momentum (OAM) already play significant roles in many domains. Here we propose a practical design of an OAM beam splitter based on a single phase-only multi-ring azimuthal-quadratic diffraction optical element that can sort different OAM components into various spatial positions, and OAM state probing is also achieved. The performance is demonstrated through proof-of-principle experiments and shows favorable results. Furthermore, the intensity proportion of each OAM component, namely the OAM spectrum, is also diagnosed. This work offers high applicability and practicability for the recognition and separation of photon OAM, and thus paves the way for many advanced scenarios such as quantum communication, holographic encryption, and remote sensing.
RESUMO
Orbital angular momentum (OAM) is one of multiple dimensions of beams. A beam can carry multiple OAM components, and their intensity weights form the OAM spectrum. The OAM spectrum determines complex amplitude distributions of a beam and features unique characteristics. Thus, measuring the OAM spectrum is of great significance, especially for OAM-based applications. Here we employ a deep neural network combined with a phase-only diffraction optical element to measure the OAM spectrum. The diffraction optical element is designed to diffract incident beams into distinct patterns corresponding to OAM distributions. Then, the EfficientNet, a kind of deep neural network, is adjusted to adapt and analyze the diffraction pattern to calculate the OAM spectrum. The favorable experimental results show that our proposal can reconstruct the OAM spectra with high precision and speed, works well for different numbers of OAM channels, and is also robust to Gaussian noise and random zooming. This work opens a new, to the best of our knowledge, ability for OAM spectrum recognition and will find applications in a number of advanced domains including large capacity optical communications, quantum key distribution, optical trapping, rotation detection, and so on.
RESUMO
Optical vortex arrays (OVAs) have successfully aroused substantial interest from researchers for their promising prospects ranging from classical to quantum physics. Previous reported OVAs still show a lack of controllable dimensions which may hamper their applications. Taking an isolated perfect optical vortex (POV) as an array element, whose diameter is independent of its topological charge (TC), this paper proposes combined phase-only holograms to produce sophisticated POV arrays. The contributed scheme enables dynamically controllable multi-ring, TC, eccentricity, size, and the number of optical vortices (OVs). Apart from traditional single ring POV element, we set up a ßg library to obtain optimized double ring POV element. With multiple selective degrees of freedom to be chosen, a series of POV arrays are generated which not only elucidate versatility of the method but also unravel analytical relationships between the set parameters and intensity patterns. More exotic structures are formed like the "Bear POV" to manifest the potential of this approach in tailoring customized structure beams. The experimental results show robust firmness with the theoretical simulations. As yet, these arrays make their public debut so far as we know, and will find miscellaneous applications especially in multi-microparticle trapping, large-capacity optical communications, novel pumping lasers and so on.
RESUMO
A wavelength tunable single-longitudinal-mode (SLM) Er:YAG ring laser around 1.6 µm is demonstrated. By using an acousto-optic modulator (AOM) to force unidirectional operation, up to 10.4 W and 8.7 W SLM laser output power are obtained at 1645.22 nm and 1617.33 nm, with corresponding slope efficiencies of 45% and 40%, respectively. Besides, stable dual-wavelength operation at both 1645 nm and 1617 nm is also achieved with the maximum power of 9.1 W. By rotating the birefringent filter (BRF) in the ring cavity, the wavelength could be tuned from 1616.77 nm to 1617.51 nm and 1644.51 nm to 1646.12 nm. The line width is measured to be 125 kHz at 1617 nm and 131 kHz at 1645 nm via the time-delayed self-heterodyne method. As far as we know, 8.7 W is the highest continuous-wave SLM output power at 1617 nm.
RESUMO
A denoising method based on singular value decomposition (SVD) and variational mode decomposition (VMD) is proposed for wind lidar. Utilizing the covariance matrix based lidar signal simulation model, the performance of VMD, SVD, and VMD-SVD is evaluated. The results show that the VMD-SVD method is of better performance, and the output signal-to-noise ratio (SNR) is about 12 dB at the input SNR of -9dB. The actual lidar signals processing is performed with this combined denoising method, and the detection range and wind speed at pulse accumulation numbers of 50,100, and 300 are compared. We set the wind speed resulting from noisy signal with pulse accumulation number of 300 as the reference wind speed, and the mean value and standard deviation of wind differences are analyzed. The results show that the denoising method can not only increase the detection range while ensuring the accuracy of wind speed estimation but also achieve the same detection distance with fewer pulse accumulations, thereby improving the temporal resolution. For the pulse accumulation number of 50, the detection range is extended to 24 km from 18.45 km, and the standard deviation of speed difference is 0.88 m/s; for the same detection range, the temporal resolution is increased by about 6 times.
RESUMO
The vector vortex beams (VVB) possessing non-separable states of light, in which polarization and orbital angular momentum (OAM) are coupled, have attracted more and more attentions in science and technology, due to the unique nature of the light field. However, atmospheric transmission distortion is a recurring challenge hampering the practical application, such as communication and imaging. In this work, we built a deep learning based adaptive optics system to compensate the turbulence aberrations of the vector vortex mode in terms of phase distribution and mode purity. A turbulence aberration correction convolutional neural network (TACCNN) model, which can learn the mapping relationship of intensity profile of the distorted vector vortex modes and the turbulence phase generated by first 20 Zernike modes, is well designed. After supervised learning plentiful experimental samples, the TACCNN model compensates turbulence aberration for VVB quickly and accurately. For the first time, experimental results show that through correction, the mode purity of the distorted VVB improves from 19% to 70% under the turbulence strength of D/r0 = 5.28 with correction time 100â ms. Furthermore, both spatial modes and the light intensity distribution can be well compensated in different atmospheric turbulence.
RESUMO
Solid-state single-frequency lasers around 1.6 µm are ideal sources for coherent Doppler wind lidars (CDWLs). A CDWL system with 1645 nm sing-frequency, injection-seeded Er:YAG ceramic laser is demonstrated. The Er:YAG laser based on an "M-shaped" ring resonator operates at pulse repetition frequencies (PRFs) of 300-1000 Hz at room temperature. The maximum single-frequency output energy is 10.1 mJ with a pulse width of 179 ns at 300 Hz. The 1645 nm Er:YAG laser is first used in a long-range CDWL system, and a line of sight (LOS) wind velocity up to 25â km is detected with 90 m range resolution in 0.5 s observation. To verify the reliability of the measurement results, the relationship between detection range, pulse energy, and accumulated numbers is also demonstrated.
RESUMO
A 4-pass structure Er:YAG MOPA system at 1645â nm is theoretically and experimentally investigated. In accordance with the theoretical analysis, the 4-pass structure significantly improved the amplification performance. The highest gain is about 4 with 1 mJ incident seed energy. The power fluctuation and beam quality are improved after the amplification.
RESUMO
A laser beam lattice from tailoring spatial dimensions of lights is a kind of structured optical field, which already have found many applications in lots of domains. Here we propose a geometric phase element made from polymerized liquid crystals to transform Gaussian beams into a 64×64 beam lattice with high performance. Different from other geometric phase elements, the proposed element can introduce identical phase modulations for any polarizations, indicating that the beam lattice could be well generated with arbitrary incident homogeneous polarizations but not limited to specific circular polarizations. In the experiment, a 64×64 beam lattice is well generated. It is estimated that the uniformity of the obtained lattice fluctuates about 60% among various incident polarizations, which is very close to the prediction. This work opens a new site for producing high-dimensional beam lattices and will inspire more advanced applications.
RESUMO
A resonantly pumped Er:YAG vector laser emitting at 1645 nm with selective polarization states is demonstrated. A compact five-mirror resonator incorporated a pair of quarter-wave plates (QWPs), and a pair of q-plates (QPs) is employed. Cylindrical vector beams of all states on a single high-order Poincaré sphere could be obtained by rotating the QWPs and QPs relatively.
RESUMO
We present an injection-seeding Q-switched 1645 nm Er:YAG ceramic laser with high frequency stability and energy stability by combining the injection-seeding technique and Pound-Drever-Hall technique. 10.31 mJ single-frequency pulses with optimal frequency stability (525 kHz) and relative energy stability (0.52%) at a high pulse repetition rate of 1 kHz are obtained. To the best of our knowledge, this is the highest frequency stability and energy stability so far in a high pulse repetition frequency, large pulse energy, single-frequency Q-switched Er-doped solid laser. This single frequency laser with high stability provides an excellent light source for a coherent lidar system.
RESUMO
A high pulse repetition frequency (PRF) single-frequency Er:YAG ceramic ring laser is demonstrated. A double-ceramics ring cavity both end-pumped by a 1532-nm fiber laser is also used to increase the pulse energy. The maximum single-frequency output energies are 21.0 mJ, 18.3 mJ, and 14.4 mJ at the PRF of 500 Hz, 750 Hz, and 1 kHz, respectively. Correspondingly, the pulse widths are 93.2 ns, 106.8 ns, and 130 ns. To the best of our knowledge, this is the highest energy at high PRFs obtained from a single-frequency injection-seeded Er:YAG ceramic laser.