RESUMO
KEY MESSAGE: For genomic selection in clonally propagated crops with diploid (-like) meiotic behavior to be effective, crossing parents should be selected based on genomic predicted cross-performance unless dominance is negligible. For genomic selection (GS) in clonal breeding programs to be effective, parents should be selected based on genomic predicted cross-performance unless dominance is negligible. Genomic prediction of cross-performance enables efficient exploitation of the additive and dominance value simultaneously. Here, we compared different GS strategies for clonally propagated crops with diploid (-like) meiotic behavior, using strawberry as an example. We used stochastic simulation to evaluate six combinations of three breeding programs and two parent selection methods. The three breeding programs included (1) a breeding program that introduced GS in the first clonal stage, and (2) two variations of a two-part breeding program with one and three crossing cycles per year, respectively. The two parent selection methods were (1) parent selection based on genomic estimated breeding values (GEBVs) and (2) parent selection based on genomic predicted cross-performance (GPCP). Selection of parents based on GPCP produced faster genetic gain than selection of parents based on GEBVs because it reduced inbreeding when the dominance degree increased. The two-part breeding programs with one and three crossing cycles per year using GPCP always produced the most genetic gain unless dominance was negligible. We conclude that (1) in clonal breeding programs with GS, parents should be selected based on GPCP, and (2) a two-part breeding program with parent selection based on GPCP to rapidly drive population improvement has great potential to improve breeding clonally propagated crops.
Assuntos
Melhoramento Vegetal , Seleção Genética , Melhoramento Vegetal/métodos , Genoma , Genômica/métodos , Endogamia , Produtos Agrícolas/genética , Modelos GenéticosRESUMO
KEY MESSAGE: The integration of known and latent environmental covariates within a single-stage genomic selection approach provides breeders with an informative and practical framework to utilise genotype by environment interaction for prediction into current and future environments. This paper develops a single-stage genomic selection approach which integrates known and latent environmental covariates within a special factor analytic framework. The factor analytic linear mixed model of Smith et al. (2001) is an effective method for analysing multi-environment trial (MET) datasets, but has limited practicality since the underlying factors are latent so the modelled genotype by environment interaction (GEI) is observable, rather than predictable. The advantage of using random regressions on known environmental covariates, such as soil moisture and daily temperature, is that the modelled GEI becomes predictable. The integrated factor analytic linear mixed model (IFA-LMM) developed in this paper includes a model for predictable and observable GEI in terms of a joint set of known and latent environmental covariates. The IFA-LMM is demonstrated on a late-stage cotton breeding MET dataset from Bayer CropScience. The results show that the known covariates predominately capture crossover GEI and explain 34.4% of the overall genetic variance. The most notable covariates are maximum downward solar radiation (10.1%), average cloud cover (4.5%) and maximum temperature (4.0%). The latent covariates predominately capture non-crossover GEI and explain 40.5% of the overall genetic variance. The results also show that the average prediction accuracy of the IFA-LMM is [Formula: see text] higher than conventional random regression models for current environments and [Formula: see text] higher for future environments. The IFA-LMM is therefore an effective method for analysing MET datasets which also utilises crossover and non-crossover GEI for genomic prediction into current and future environments. This is becoming increasingly important with the emergence of rapidly changing environments and climate change.
Assuntos
Interação Gene-Ambiente , Modelos Genéticos , Genômica , Genótipo , Melhoramento Vegetal , SoloRESUMO
Genetic variance is a central parameter in quantitative genetics and breeding. Assessing changes in genetic variance over time as well as the genome is therefore of high interest. Here, we extend a previously proposed framework for temporal analysis of genetic variance using the pedigree-based model, to a new framework for temporal and genomic analysis of genetic variance using marker-based models. To this end, we describe the theory of partitioning genetic variance into genic variance and within-chromosome and between-chromosome linkage-disequilibrium, and how to estimate these variance components from a marker-based model fitted to observed phenotype and marker data. The new framework involves three steps: (i) fitting a marker-based model to data, (ii) sampling realisations of marker effects from the fitted model and for each sample calculating realisations of genetic values and (iii) calculating the variance of sampled genetic values by time and genome partitions. Analysing time partitions indicates breeding programme sustainability, while analysing genome partitions indicates contributions from chromosomes and chromosome pairs and linkage-disequilibrium. We demonstrate the framework with a simulated breeding programme involving a complex trait. Results show good concordance between simulated and estimated variances, provided that the fitted model is capturing genetic complexity of a trait. We observe a reduction of genetic variance due to selection and drift changing allele frequencies, and due to selection inducing negative linkage-disequilibrium.
Assuntos
Cruzamento , Modelos Genéticos , Seleção Genética , Genoma , Genômica/métodos , Desequilíbrio de Ligação , Linhagem , FenótipoRESUMO
Genomic selection offers several routes for increasing the genetic gain or efficiency of plant breeding programmes. In various species of livestock, there is empirical evidence of increased rates of genetic gain from the use of genomic selection to target different aspects of the breeder's equation. Accurate predictions of genomic breeding value are central to this, and the design of training sets is in turn central to achieving sufficient levels of accuracy. In summary, small numbers of close relatives and very large numbers of distant relatives are expected to enable predictions with higher accuracy. To quantify the effect of some of the properties of training sets on the accuracy of genomic selection in crops, we performed an extensive field-based winter wheat trial. In summary, this trial involved the construction of 44 F2:4 bi- and tri-parental populations, from which 2992 lines were grown on four field locations and yield was measured. For each line, genotype data were generated for 25 K segregating SNP markers. The overall heritability of yield was estimated to 0.65, and estimates within individual families ranged between 0.10 and 0.85. Genomic prediction accuracies of yield BLUEs were 0.125-0.127 using two different cross-validation approaches and generally increased with training set size. Using related crosses in training and validation sets generally resulted in higher prediction accuracies than using unrelated crosses. The results of this study emphasise the importance of the training panel design in relation to the genetic material to which the resulting prediction model is to be applied.
Assuntos
Genômica/métodos , Melhoramento Vegetal , Triticum/genética , Cruzamentos Genéticos , Marcadores Genéticos , Genótipo , Modelos Genéticos , Polimorfismo de Nucleotídeo Único , Seleção GenéticaRESUMO
BACKGROUND: In this paper, we simulate deleterious load in an animal breeding program, and compare the efficiency of genome editing and selection for decreasing it. Deleterious variants can be identified by bioinformatics screening methods that use sequence conservation and biological prior information about protein function. However, once deleterious variants have been identified, how can they be used in breeding? RESULTS: We simulated a closed animal breeding population that is subject to both natural selection against deleterious load and artificial selection for a quantitative trait representing the breeding goal. Deleterious load was polygenic and was due to either codominant or recessive variants. We compared strategies for removal of deleterious alleles by genome editing (RAGE) to selection against carriers. When deleterious variants were codominant, the best strategy for prioritizing variants was to prioritize low-frequency variants. When deleterious variants were recessive, the best strategy was to prioritize variants with an intermediate frequency. Selection against carriers was inefficient when variants were codominant, but comparable to editing one variant per sire when variants were recessive. CONCLUSIONS: Genome editing of deleterious alleles reduces deleterious load, but requires the simultaneous editing of multiple deleterious variants in the same sire to be effective when deleterious variants are recessive. In the short term, selection against carriers is a possible alternative to genome editing when variants are recessive. Our results suggest that, in the future, there is the potential to use RAGE against deleterious load in animal breeding.
Assuntos
Cruzamento/métodos , Biologia Computacional/métodos , Edição de Genes/métodos , Alelos , Animais , Simulação por Computador , Frequência do Gene/genética , Variação Genética , Endogamia , Fenótipo , Seleção Genética , Seleção Artificial/genéticaRESUMO
Key message Optimal cross selection increases long-term genetic gain of two-part programs with rapid recurrent genomic selection. It achieves this by optimising efficiency of converting genetic diversity into genetic gain through reducing the loss of genetic diversity and reducing the drop of genomic prediction accuracy with rapid cycling. This study evaluates optimal cross selection to balance selection and maintenance of genetic diversity in two-part plant breeding programs with rapid recurrent genomic selection. The two-part program reorganises a conventional breeding program into a population improvement component with recurrent genomic selection to increase the mean value of germplasm and a product development component with standard methods to develop new lines. Rapid recurrent genomic selection has a large potential, but is challenging due to genotyping costs or genetic drift. Here we simulate a wheat breeding program for 20 years and compare optimal cross selection against truncation selection in the population improvement component with one to six cycles per year. With truncation selection we crossed a small or a large number of parents. With optimal cross selection we jointly optimised selection, maintenance of genetic diversity, and cross allocation with AlphaMate program. The results show that the two-part program with optimal cross selection delivered the largest genetic gain that increased with the increasing number of cycles. With four cycles per year optimal cross selection had 78% (15%) higher long-term genetic gain than truncation selection with a small (large) number of parents. Higher genetic gain was achieved through higher efficiency of converting genetic diversity into genetic gain; optimal cross selection quadrupled (doubled) efficiency of truncation selection with a small (large) number of parents. Optimal cross selection also reduced the drop of genomic selection accuracy due to the drift between training and prediction populations. In conclusion optimal cross selection enables optimal management and exploitation of population improvement germplasm in two-part programs.
Assuntos
Cruzamentos Genéticos , Genômica , Melhoramento Vegetal , Seleção Genética , Simulação por Computador , Variação Genética , Triticum/genéticaRESUMO
Key message New fast and accurate method for phasing and imputation of SNP chip genotypes within diploid bi-parental plant populations. This paper presents a new heuristic method for phasing and imputation of genomic data in diploid plant species. Our method, called AlphaPlantImpute, explicitly leverages features of plant breeding programmes to maximise the accuracy of imputation. The features are a small number of parents, which can be inbred and usually have high-density genomic data, and few recombinations separating parents and focal individuals genotyped at low density (i.e. descendants that are the imputation targets). AlphaPlantImpute works roughly in three steps. First, it identifies informative low-density genotype markers in parents. Second, it tracks the inheritance of parental alleles and haplotypes to focal individuals at informative markers. Finally, it uses this low-density information as anchor points to impute focal individuals to high density. We tested the imputation accuracy of AlphaPlantImpute in simulated bi-parental populations across different scenarios. We also compared its accuracy to existing software called PlantImpute. In general, AlphaPlantImpute had better or equal imputation accuracy as PlantImpute. The computational time and memory requirements of AlphaPlantImpute were tiny compared to PlantImpute. For example, accuracy of imputation was 0.96 for a scenario where both parents were inbred and genotyped at 25,000 markers per chromosome and a focal F2 individual was genotyped with 50 markers per chromosome. The maximum memory requirement for this scenario was 0.08 GB and took 37 s to complete.
Assuntos
Heurística Computacional , Plantas/genética , Polimorfismo de Nucleotídeo Único , Software , Alelos , Simulação por Computador , Marcadores Genéticos , Genômica , Genótipo , Haplótipos , Melhoramento VegetalRESUMO
Advances in sequencing technologies mean that insights into crop diversification can now be explored in crops beyond major staples. We use a genome assembly of finger millet, an allotetraploid orphan crop, to analyze DArTseq single nucleotide polymorphisms (SNPs) at the whole and sub-genome level. A set of 8778 SNPs and 13 agronomic traits was used to characterize a diverse panel of 423 landraces from Africa and Asia. Through principal component analysis (PCA) and discriminant analysis of principal components, four distinct groups of accessions were identified that coincided with the primary geographic regions of finger millet cultivation. Notably, East Africa, presumed to be the crop's origin, exhibited the lowest genetic diversity. The PCA of phenotypic data also revealed geographic differentiation, albeit with differing relationships among geographic areas than indicated with genomic data. Further exploration of the sub-genomes A and B using neighbor-joining trees revealed distinct features that provide supporting evidence for the complex evolutionary history of finger millet. Although genome-wide association study found only a limited number of significant marker-trait associations, a clustering approach based on the distribution of marker effects obtained from a ridge regression genomic model was employed to investigate trait complexity. This analysis uncovered two distinct clusters. Overall, the findings suggest that finger millet has undergone complex and context-specific diversification, indicative of a lengthy domestication history. These analyses provide insights for the future development of finger millet.
Assuntos
Eleusine , Eleusine/genética , Estudo de Associação Genômica Ampla , Ásia , Fenótipo , GenômicaRESUMO
Nucleus-based breeding programs are characterized by intense selection that results in high genetic gain, which inevitably means reduction of genetic variation in the breeding population. Therefore, genetic variation in such breeding systems is typically managed systematically, for example, by avoiding mating the closest relatives to limit progeny inbreeding. However, intense selection requires maximum effort to make such breeding programs sustainable in the long-term. The objective of this study was to use simulation to evaluate the long-term impact of genomic selection on genetic mean and variance in an intense layer chicken breeding program. We developed a large-scale stochastic simulation of an intense layer chicken breeding program to compare conventional truncation selection to genomic truncation selection optimized with either minimization of progeny inbreeding or full-scale optimal contribution selection. We compared the programs in terms of genetic mean, genic variance, conversion efficiency, rate of inbreeding, effective population size, and accuracy of selection. Our results confirmed that genomic truncation selection has immediate benefits compared to conventional truncation selection in all specified metrics. A simple minimization of progeny inbreeding after genomic truncation selection did not provide any significant improvements. Optimal contribution selection was successful in having better conversion efficiency and effective population size compared to genomic truncation selection, but it must be fine-tuned for balance between loss of genetic variance and genetic gain. In our simulation, we measured this balance using trigonometric penalty degrees between truncation selection and a balanced solution and concluded that the best results were between 45° and 65°. This balance is specific to the breeding program and depends on how much immediate genetic gain a breeding program may risk vs. save for the future. Furthermore, our results show that the persistence of accuracy is better with optimal contribution selection compared to truncation selection. In general, our results show that optimal contribution selection can ensure long-term success in intensive breeding programs using genomic selection.
RESUMO
Genomic selection has recently become an established part of breeding strategies in cereals. However, a limitation of linear genomic prediction models for complex traits such as yield is that these are unable to accommodate Genotype by Environment effects, which are commonly observed over trials on multiple locations. In this study, we investigated how this environmental variation can be captured by the collection of a large number of phenomic markers using high-throughput field phenotyping and whether it can increase GS prediction accuracy. For this purpose, 44 winter wheat (Triticum aestivum L.) elite populations, comprising 2,994 lines, were grown on two sites over 2 years, to approximate the size of trials in a practical breeding programme. At various growth stages, remote sensing data from multi- and hyperspectral cameras, as well as traditional ground-based visual crop assessment scores, were collected with approximately 100 different data variables collected per plot. The predictive power for grain yield was tested for the various data types, with or without genome-wide marker data sets. Models using phenomic traits alone had a greater predictive value (R2 = 0.39-0.47) than genomic data (approximately R2 = 0.1). The average improvement in predictive power by combining trait and marker data was 6%-12% over the best phenomic-only model, and performed best when data from one full location was used to predict the yield on an entire second location. The results suggest that genetic gain in breeding programmes can be increased by utilisation of large numbers of phenotypic variables using remote sensing in field trials, although at what stage of the breeding cycle phenomic selection could be most profitably applied remains to be answered.
RESUMO
This paper introduces AlphaSimR, an R package for stochastic simulations of plant and animal breeding programs. AlphaSimR is a highly flexible software package able to simulate a wide range of plant and animal breeding programs for diploid and autopolyploid species. AlphaSimR is ideal for testing the overall strategy and detailed design of breeding programs. AlphaSimR utilizes a scripting approach to building simulations that is particularly well suited for modeling highly complex breeding programs, such as commercial breeding programs. The primary benefit of this scripting approach is that it frees users from preset breeding program designs and allows them to model nearly any breeding program design. This paper lists the main features of AlphaSimR and provides a brief example simulation to show how to use the software.
Assuntos
Melhoramento Vegetal , Software , Animais , Simulação por Computador , DiploideRESUMO
Breeding has increased genetic gain for dairy cattle in advanced economies but has had limited success in improving dairy cattle in low- to middle-income countries (LMIC). Genetic evaluations are a central component of delivering genetic gain, because they separate the genetic and environmental effects of animals' phenotypes. Genetic evaluations have been successful in advanced economies because of large data sets and strong genetic connectedness, provided by the widespread use of artificial insemination (AI) and accurate recording of pedigree information. In smallholder dairy production systems of many LMICs, the limited use of AI and small herd sizes results in a data structure with insufficient genetic connectedness between herds to facilitate genetic evaluations based on pedigree. Genomic information keeps track of shared haplotypes rather than shared relatives captured by pedigree records. Therefore, genomic information could capture "hidden" genetic relationships, that are not captured by pedigree information, to strengthen genetic connectedness in LMIC smallholder dairy data sets. This study's objective was to use simulation to quantify the power of genomic information to enable genetic evaluation using LMIC smallholder dairy data sets. The results from this study show that (1) genetic evaluations using genomic information were more accurate than those using pedigree information in populations with a high effective population size and weak genetic connectedness; and (2) genetic evaluations modeling herd as a random effect had higher or equal accuracy than those modeling herd as a fixed effect. This demonstrates the potential of genomic information to be an enabling technology in LMIC smallholder dairy production systems by facilitating genetic evaluations with in situ records collected from herds of ≤4 cows. The establishment of routine genomic evaluations could allow the development of LMIC breeding programs comprising an informal set of nucleus animals distributed across many small herds within the target environment. These nucleus animals could be used for genetic evaluation, and the best animals could be disseminated to participating smallholder dairy farms. Together, this could increase the productivity, profitability, and sustainability of LMIC smallholder dairy production systems.
RESUMO
This paper presents an extension to a heuristic method for phasing and imputation of genotypes of descendants in biparental populations so that it can phase and impute genotypes of parents that are ungenotyped or partially genotyped. The imputed genotypes of the parent are used to impute low-density (Ld) genotyped descendants to high density (Hd). The extension was implemented as part of the AlphaPlantImpute software and works in three steps. First, it identifies whether a parent has no or Ld genotypes and identifies its relatives that have Hd genotypes. Second, using the Hd genotypes of relatives, it determines whether the parent is homozygous or heterozygous for a given locus. Third, it phases heterozygous positions of the parent by matching haplotypes to its relatives. We measured the accuracy (correlation between true and imputed genotypes) of imputing parent genotypes in simulated biparental populations from different scenarios. We tested the imputation accuracy of the missing parent's descendants using the true genotype of the parent and compared this with using the imputed genotypes of the parent. Across all scenarios, the imputation accuracy of a parent was >0.98 and did not drop below â¼0.96. The imputation accuracy of a parent was always higher when it was inbred than outbred. Including ancestors of the parent at Hd, increasing the number of crosses and the number of Hd descendants increased the imputation accuracy. The high imputation accuracy achieved for the parent translated to little or no impact on the imputation accuracy of its descendants.
RESUMO
Invasive species are among the major driving forces behind biodiversity loss. Gene drive technology may offer a humane, efficient and cost-effective method of control. For safe and effective deployment it is vital that a gene drive is both self-limiting and can overcome evolutionary resistance. We present HD-ClvR in this modelling study, a novel combination of CRISPR-based gene drives that eliminates resistance and localises spread. As a case study, we model HD-ClvR in the grey squirrel (Sciurus carolinensis), which is an invasive pest in the UK and responsible for both biodiversity and economic losses. HD-ClvR combats resistance allele formation by combining a homing gene drive with a cleave-and-rescue gene drive. The inclusion of a self-limiting daisyfield gene drive allows for controllable localisation based on animal supplementation. We use both randomly mating and spatial models to simulate this strategy. Our findings show that HD-ClvR could effectively control a targeted grey squirrel population, with little risk to other populations. HD-ClvR offers an efficient, self-limiting and controllable gene drive for managing invasive pests.
Assuntos
Biodiversidade , Sistemas CRISPR-Cas/genética , Controle Biológico de Vetores , Controle de Pragas/métodos , Alelos , Animais , Tecnologia de Impulso Genético/métodos , Genes Essenciais/genética , Humanos , Espécies IntroduzidasRESUMO
Intercrop breeding programs using genomic selection can produce faster genetic gain than intercrop breeding programs using phenotypic selection. Intercropping is an agricultural practice in which two or more component crops are grown together. It can lead to enhanced soil structure and fertility, improved weed suppression, and better control of pests and diseases. Especially in subsistence agriculture, intercropping has great potential to optimize farming and increase profitability. However, breeding for intercrop varieties is complex as it requires simultaneous improvement of two or more component crops that combine well in the field. We hypothesize that genomic selection can significantly simplify and accelerate the process of breeding crops for intercropping. Therefore, we used stochastic simulation to compare four different intercrop breeding programs implementing genomic selection and an intercrop breeding program entirely based on phenotypic selection. We assumed three different levels of genetic correlation between monocrop grain yield and intercrop grain yield to investigate how the different breeding strategies are impacted by this factor. We found that all four simulated breeding programs using genomic selection produced significantly more intercrop genetic gain than the phenotypic selection program regardless of the genetic correlation with monocrop yield. We suggest a genomic selection strategy which combines monocrop and intercrop trait information to predict general intercropping ability to increase selection accuracy in the early stages of a breeding program and to minimize the generation interval.
RESUMO
Hybrid vigour has the potential to substantially increase the yield of self-pollinating crops such as wheat and rice, but future hybrid performance may depend on the initial strategy to form heterotic pools. We used in silico stochastic simulation of future hybrid performance in a self-pollinating crop to evaluate three strategies of forming heterotic pools in the founder population. The model included either 500, 2000 or 8000 quantitative trait nucleotides (QTN) across 10 chromosomes that contributed to a quantitative trait with population mean 100 and variance 10. The average degree of dominance at each QTN was either 0.2, 0.4 or 0.8 with variance 0.2. Three strategies for splitting the founder population into two heterotic pools were compared: (i) random split; (ii) split based on genetic distance according to principal component analysis of SNP genotypes; and (iii) optimized split based on F1 hybrid performance in a diallel cross among the founders. Future hybrid performance was stochastically simulated over 30 cycles of reciprocal recurrent selection based on true genetic values for additive and dominance effects. The three strategies of forming heterotic pools produced similar future hybrid performance, and superior future hybrids to a control population selected on inbred line performance when the number of quantitative trait nucleotides was ≥2000 and/or the average degree of dominance was ≥0.4.
Assuntos
Simulação por Computador , Produtos Agrícolas , Hibridização Genética , Modelos Genéticos , Oryza , Polinização/genética , Triticum , Produtos Agrícolas/genética , Produtos Agrícolas/crescimento & desenvolvimento , Oryza/genética , Oryza/crescimento & desenvolvimento , Polimorfismo de Nucleotídeo Único , Locos de Características Quantitativas , Triticum/genética , Triticum/crescimento & desenvolvimentoRESUMO
Over the last two decades, the application of genomic selection has been extensively studied in various crop species, and it has become a common practice to report prediction accuracies using cross validation. However, genomic prediction accuracies obtained from random cross validation can be strongly inflated due to population or family structure, a characteristic shared by many breeding populations. An understanding of the effect of population and family structure on prediction accuracy is essential for the successful application of genomic selection in plant breeding programs. The objective of this study was to make this effect and its implications for practical breeding programs comprehensible for breeders and scientists with a limited background in quantitative genetics and genomic selection theory. We, therefore, compared genomic prediction accuracies obtained from different random cross validation approaches and within-family prediction in three different prediction scenarios. We used a highly structured population of 940 Brassica napus hybrids coming from 46 testcross families and two subpopulations. Our demonstrations show how genomic prediction accuracies obtained from among-family predictions in random cross validation and within-family predictions capture different measures of prediction accuracy. While among-family prediction accuracy measures prediction accuracy of both the parent average component and the Mendelian sampling term, within-family prediction only measures how accurately the Mendelian sampling term can be predicted. With this paper we aim to foster a critical approach to different measures of genomic prediction accuracy and a careful analysis of values observed in genomic selection experiments and reported in literature.
RESUMO
In this work, we performed simulations to develop and test a strategy for exploiting surrogate sire technology in animal breeding programs. Surrogate sire technology allows the creation of males that lack their own germline cells, but have transplanted spermatogonial stem cells from donor males. With this technology, a single elite male donor could give rise to huge numbers of progeny, potentially as much as all the production animals in a particular time period. One hundred replicates of various scenarios were performed. Scenarios followed a common overall structure but differed in the strategy used to identify elite donors and how these donors were used in the product development part. The results of this study showed that using surrogate sire technology would significantly increase the genetic merit of commercial sires, by as much as 6.5 to 9.2 years' worth of genetic gain compared to a conventional breeding program. The simulations suggested that a strategy involving three stages (an initial genomic test followed by two subsequent progeny tests) was the most effective of all the strategies tested. The use of one or a handful of elite donors to generate the production animals would be very different to current practice. While the results demonstrate the great potential of surrogate sire technology there are considerable risks but also other opportunities. Practical implementation of surrogate sire technology would need to account for these.
Assuntos
Células-Tronco Germinativas Adultas , Animais Domésticos/genética , Gado/genética , Seleção Genética , Animais , Animais Domésticos/crescimento & desenvolvimento , Cruzamento , Feminino , Genoma/genética , Lactação/genética , Gado/crescimento & desenvolvimento , MasculinoRESUMO
Wheat ( L.) breeding programs test experimental lines in multiple locations over multiple years to get an accurate assessment of grain yield and yield stability. Selections in early generations of the breeding pipeline are based on information from only one or few locations and thus materials are advanced with little knowledge of the genotype × environment interaction (G × E) effects. Later, large trials are conducted in several locations to assess the performance of more advanced lines across environments. Genomic selection (GS) models that include G × E covariates allow us to borrow information not only from related materials, but also from historical and correlated environments to better predict performance within and across specific environments. We used reaction norm models with several cross-validation schemes to demonstrate the increased breeding efficiency of Kansas State University's hard red winter wheat breeding program. The GS reaction norm models line effect (L) + environment effect (E), L + E + genotype environment (G), and L + E + G + (G × E) effects) showed high accuracy values (>0.4) when predicting the yield performance in untested environments, sites or both. The GS model L + E + G + (G × E) presented the highest prediction ability ( = 0.54) when predicting yield in incomplete field trials for locations with a moderate number of lines. The difficulty of predicting future years (forward prediction) is indicated by the relatively low accuracy ( = 0.171) seen even when environments with 300+ lines were included.