3D morphometry of red blood cells by digital holography.

Three dimensional (3D) morphometric analysis of flowing and not-adherent cells is an important aspect for diagnostic purposes. However, diagnostics tools need to be quantitative, label-free and, as much as possible, accurate. Recently, a simple holographic approach, based on shape from silhouette algorithm, has been demonstrated for accurate calculation of cells biovolume and displaying their 3D shapes. Such approach has been adopted in combination with holographic optical tweezers and successfully applied to cells with convex shape. Nevertheless, unfortunately, the method fails in case of specimen with concave surfaces. Here, we propose an effective approach to achieve correct 3D shape measurement that can be extended in case of cells having concave surfaces, thus overcoming the limit of the previous technique. We prove the new procedure for healthy red blood cells (RBCs) (i.e., discocytes) having a concave surface in their central region. Comparative analysis of experimental results with a theoretical 3D geometrical model of RBC is discussed in order to evaluate accuracy of the proposed approach. Finally, we show that the method can be also useful to classify, in terms of morphology, different varieties of RBCs.

Determination of dimethyl fumarate in desiccant and antimould sachets by reversed-phase liquid chromatography.

A method for the determination of dimethyl fumarate (DMF) in desiccant and antimould sachets, employed for protecting consumer products from humidity and mould, has been developed. The method is based on a solid-liquid extraction followed by HPLC-UV analysis. The method was validated with respect to recovery, linearity, limits of detection and quantitation and precision. The recovery was 98%. The correlation coefficient value (r) was equal to 0.94. Both intra- and inter-day precisions were studied at several concentration levels, being satisfactory in all cases (RSD < 5). Limits of detection and quantification values were in the low microgram per gram level, thus allowing the determination of DMF at concentrations below the limit established (0.1 mg/kg) by the recent EU Directive (Decision 2009/251/EC). The proposed procedure was applied for the determination of the target compound in 41 desiccant and antimould samples. DMF was detected in 39.0% of samples and its content in many samples exceeded the legal limits. The results of our analysis highlight the high risk of exposure to this powerful allergic sensitizer for consumers.

Maskless Arrayed Nanofiber Mats by Bipolar Pyroelectrospinning.

The numerous advantages of micro- and nanostructures produced by electrospinning (ES) have stimulated enormous interest in this technology with potential application in several fields. However, ES still has some limitations in controlling the geometrical arrangement of the fiber mats so that expensive and time-consuming technologies are usually employed for producing ordered geometries. Here we present a technique that we call "bipolar pyroelectrospinning" (b-PES) for generating ordered arrays of fiber mats in a direct manner by using the bipolar pyroelectric field produced by a periodically poled lithium niobate crystal (PPLN). The b-PES is free from expensive electrodes, nozzles, and masks because it makes use simply of the structured pyroelectric field produced by the PPLN crystal used as collector. The results show clearly the reliability of the technique in producing a wide variety of arrayed fiber mats that could find application in bioengineering or many other fields. Preliminary results of live cells patterning under controlled geometrical constraints is also reported and discussed in order to show potential exploitation as a scaffold in tissue engineering.

Pyro-Electrification of Freestanding Polymer Sheets: A New Tool for Cation-Free Manipulation of Cell Adhesion in vitro.

Localized electric fields have become, in recent years, a source of inspiration to researchers and laboratories thanks to a huge amount of applications derived from it, including positioning of microparticles as building blocks for electrical, optical, and magnetic devices. The possibility of producing polymeric materials with surface charge thus opens new perspectives for applications where process simplicity and cost-effectiveness of flexible electronics are of fundamental importance. In particular, the influence of surface charges is widely studied and is a critical issue especially when new materials and functional technologies are introduced. Here, we report a voltage-free pyro-electrification (PE) process able to induce a permanent dipole orientation into polymer sheets under both mono- and bipolar distribution. The technique makes use of the pyroelectric effect for generating electric potentials on the order of kilovolts by an easy-to-accomplish thermal treatment of ferroelectric lithium niobate (LN) crystals. The PE allows us to avoid the expensive and time-consuming fabrication of high-power electrical circuits, as occurs in traditional generator-based techniques. Since the technique is fully compatible with spin-coating-based procedures, the pyro-electrified polymer sheets are easily peeled off the surface of the LN crystal after PE completion, thus providing highly stable and freestanding charged sheets. We show the reliability of the technique for different polymers and for different applications ranging from live cell patterning to biofilm formation tests for bacteria linked to food-processing environments.

Label-free quantification of the effects of lithium niobate polarization on cell adhesion via holographic microscopy.

The surface of a c- cut ferroelectric crystal at room temperature is characterized by the so-called screening surface charges, able to compensate the charge due to the spontaneous polarization. Recently, these charges inspired the investigation of the interaction affinity of live cells with lithium niobate and lithium tantalate crystals. However, different knowledge gaps still remain that prevent a reasonable application of these materials for biological applications. Here, a label-free holographic total internal reflection microscopy is shown; the technique is able to evaluate quantitatively the contact area of live fibroblast cells adhering onto the surface of a ferroelectric lithium niobate crystal. The results show values of contact area significantly different between cells adhering onto the positive or negative face of the crystal. This reinforces the reasons for using the polarization charge of these materials to study and/or control cellular processes and, thus, to develop an innovative platform based on polar dielectric functional substrates.

Label free imaging of cell-substrate contacts by holographic total internal reflection microscopy.

The study of cell adhesion contacts is pivotal to understand cell mechanics and interaction at substrates or chemical and physical stimuli. We designed and built a HoloTIR microscope for label-free quantitative phase imaging of total internal reflection. Here we show for the first time that HoloTIR is a good choice for label-free study of focal contacts and of cell/substrate interaction as its sensitivity is enhanced in comparison with standard TIR microscopy. Finally, the simplicity of implementation and relative low cost, due to the requirement of less optical components, make HoloTIR a reasonable alternative, or even an addition, to TIRF microscopy for mapping cell/substratum topography. As a proof of concept, we studied the formation of focal contacts of fibroblasts on three substrates with different levels of affinity for cell adhesion.

Simple and Rapid Bioink Jet Printing for Multiscale Cell Adhesion Islands.

A simple and rapid process for multiscale printing of bioinks with dot widths ranging from hundreds of microns down to 0.5 µm is presented. The process makes use of spontaneous surface charges generated pyroelectrically that are able to draw little daughter droplets directly from the free meniscus of a mother drop through jetting ("p-jet"), thus avoiding time-consuming and expensive fabrication of microstructured nozzles. Multiscale can be easily achieved by modulating the parameters of the p-jet process. Here, it is shown that the p-jet allows us to print well-defined adhesion islands where NIH-3T3 fibroblasts are constrained to live into cluster configurations ranging from 20 down to single cell level. The proposed fabrication approach can be useful for high-throughput studies on cell adhesion, cytoskeleton organization, and stem cell differentiation.

Bipolar Patterning of Polymer Membranes by Pyroelectrification.

Polymer freestanding membranes with permanent bipolar patterns are fabricated by "pyroelectrification". The thermal stimulation of periodically poled lithium niobate (PPLN) crystals simultaneously generates the pyroelectric effect, the glass transition of the polymer, and therefore the periodic electric poling of the polymer. The reliability of these membranes is demonstrated for applications under both dry and wet conditions, including cell patterning.

Effects of Lithium Niobate Polarization on Cell Adhesion and Morphology.

Understanding how the interfacial effects influence cell adhesion and morphology is of fundamental interest for controlling function, growth, and movement of cells in vitro and in vivo. In particular, the influence of surface charges is well-known but still controversial, especially when new functional materials and methods are introduced. Here, the influence of the spontaneous polarization of ferroelectric lithium niobate (LN) on the adhesion properties of fibroblast cells is investigated. The spontaneous polarization of LN has one of the largest known magnitudes at room temperature (∼78 µC/cm(2)), and its orientation can be patterned easily by an external voltage, this motivating highly the investigation of its interaction with cells. Immunofluorescence and migration assays show strong evidence that the surface polarity regulates the adhesion functions, with enhanced spreading of the cytoskeleton on the negative face. The results suggest the potential of LN as a platform for investigating the role of charges on cellular processes, thus favoring new strategies in fabricating those biocompatible constructs used for tissue engineering. In fact, the orientation of the high-magnitude polarization can be patterned easily and, in combination with piezoelectric, pyroelectric, and photorefractive properties, may open the route to more sophisticated charge templates for modulating the cell response.

Imaging adherent cells in the microfluidic channel hidden by flowing RBCs as occluding objects by a holographic method.

Imaging through turbid media is a challenging topic. A liquid is considered turbid when dispersed particles provoke strong light scattering, thus destroying the image formation by any standard optical system. Generally, colloidal solutions belong to the class of turbid media since dispersed particles have dimensions ranging between 0.2 µm and 2 µm. However, in microfluidics, another relevant issue has to be considered in the case of flowing liquid made of a multitude of occluding objects, e.g. red blood cells (RBCs) flowing in veins. In such a case instead of severe scattering processes unpredictable phase delays occur resulting in a wavefront distortion, thus disturbing or even hindering the image formation of objects behind such obstructing layer. In fact RBCs can be considered to be thin transparent phase objects. Here we show that sharp amplitude imaging and phase-contrast mapping of cells hidden behind biological occluding objects, namely RBCs, is possible in harsh noise conditions and with a large field-of view by Multi-Look Digital Holography microscopy (ML-DH). Noteworthy, we demonstrate that ML-DH benefits from the presence of the RBCs, providing enhancement in terms of numerical resolution and noise suppression thus obtaining images whose quality is higher than the quality achievable in the case of a liquid without occlusive objects.

Determination of five bisphenols in commercial milk samples by liquid chromatography coupled to fluorescence detection.

The presence of five bisphenols, i.e., bisphenol F, bisphenol A, bisphenol B, bisphenol F diglycidyl ether, and bisphenol A diglycidyl ether, was monitored in commercial milk packed in plastic bottles marketed in Italy. The new validated method includes a solid-phase extraction procedure followed by liquid chromatography with fluorescence detection. All positive results were confirmed by liquid chromatography-tandem mass spectrometry analysis. The limits of detection and quantification and the recovery percentages indicated that the method is suitable for detecting bisphenols in milk at concentrations far below the legal limits. Of 68 commercial milk samples analyzed, no bisphenol was found in 27 samples (39.7%), and 41 samples (60.3%) contained one or more bisphenols. The bisphenol most frequently found was bisphenol F (36 samples, 52.9%) followed by bisphenol A (20 samples, 29.4%) and bisphenol B (6 samples, 8.8%). Taking into consideration the limits of detection, no sample contained either bisphenol F diglycidyl ether or bisphenol A diglycidyl ether.