L-DOPA-Coated Manganese Oxide Nanoparticles as Dual MRI Contrast Agents and Drug-Delivery Vehicles.

Manganese oxide nanoparticles (MONPs) are capable of time-dependent magnetic resonance imaging contrast switching as well as releasing a surface-bound drug. MONPs give T2/T2* contrast, but dissolve and release T1-active Mn(2+) and L-3,4-dihydroxyphenylalanine. Complementary images are acquired with a single contrast agent, and applications toward Parkinson's disease are suggested.

Kinetics of hematopoietic stem cells and supportive activities of stromal cells in a three-dimensional bone marrow culture system.

In the bone marrow, hematopoietic cells proliferate and differentiate in close association with a three-dimensional (3D) hematopoietic microenvironment. Previously, we established a 3D bone marrow culture system. In this study, we analyzed the kinetics of hematopoietic cells, and more than 50% of hematopoietic progenitor cells, including CFU-Mix, CFU-GM and BFU-E in 3D culture were in a resting (non-S) phase. Furthermore, we examined the hematopoietic supportive ability of stromal cells by measuring the expression of various mRNAs relevant to hematopoietic regulation. Over the 4 weeks of culture, the stromal cells in the 3D culture are not needlessly activated and "quietly" regulate hematopoietic cell proliferation and differentiation during the culture, resulting in the presence of resting hematopoietic stem cells in the 3D culture for a long time. Thus, the 3D culture system may be a new tool for investigating hematopoietic stem cell-stromal cell interactions in vitro.

Formation of neural networks with structural and functional features consistent with small-world network topology on surface-grafted polymer particles.

In vitro electrophysiological investigation of neural activity at a network level holds tremendous potential for elucidating underlying features of brain function (and dysfunction). In standard neural network modelling systems, however, the fundamental three-dimensional (3D) character of the brain is a largely disregarded feature. This widely applied neuroscientific strategy affects several aspects of the structure-function relationships of the resulting networks, altering network connectivity and topology, ultimately reducing the translatability of the results obtained. As these model systems increase in popularity, it becomes imperative that they capture, as accurately as possible, fundamental features of neural networks in the brain, such as small-worldness. In this report, we combine in vitro neural cell culture with a biologically compatible scaffolding substrate, surface-grafted polymer particles (PPs), to develop neural networks with 3D topology. Furthermore, we investigate their electrophysiological network activity through the use of 3D multielectrode arrays. The resulting neural network activity shows emergent behaviour consistent with maturing neural networks capable of performing computations, i.e. activity patterns suggestive of both information segregation (desynchronized single spikes and local bursts) and information integration (network spikes). Importantly, we demonstrate that the resulting PP-structured neural networks show both structural and functional features consistent with small-world network topology.

Synthesis, Characterization and Drug Loading of Multiresponsive p[NIPAm-co-PEGMA] (core)/p[NIPAm-co-AAc] (Shell) Nanogels with Monodisperse Size Distributions.

We report the synthesis and properties of temperature- and pH-responsive p([NIPAm-co-PEGMA] (core)/[NIPAm-co-AAc] (shell)) nanogels with narrow size distributions, tunable sizes and increased drug loading efficiencies. The core-shell nanogels were synthesized using an optimized two-stage seeded polymerization methodology. The core-shell nanogels show a narrow size distribution and controllable physico-chemical properties. The hydrodynamic sizes, charge distributions, temperature-induced volume phase transition behaviors, pH-responsive behaviors and drug loading capabilities of the core-shell nanogels were investigated using transmission electron microscopy, zeta potential measurements, dynamic light scattering and UV-Vis spectroscopy. The size of the core-shell nanogels was controlled by polymerizing NIPAm with crosslinker poly(ethylene glycol) dimethacrylate (PEGDMA) of different molecular weights (Mn-200, 400, 550 and 750 g/mol) during the core synthesis. It was found that the swelling/deswelling kinetics of the nanogels was sharp and reversible; with its volume phase transition temperature in the range of 40⁻42 °C. Furthermore, the nanogels loaded with l-3,4-dihydroxyphenylalanine (L-DOPA), using a modified breathing-in mechanism, showed high loading and encapsulation efficiencies, providing potential possibilities of such nanogels for biomedical applications.

The Influence of Differently Shaped Gold Nanoparticles Functionalized with NIPAM-Based Hydrogels on the Release of Cytochrome C.

Here, we report the synthesis and functionalization of five different shapes of Au nanoparticles (NPs), namely nanorods, tetrahexahedral, bipyramids, nanomakura, and spheres with PEG and poly (N-isopropylacrylamide)-acrylic acid (pNIPAm-AAc) hydrogels. The anisotropic NPs are synthesized using seed-mediated growth in the presence of silver. The NPs have been characterized using Dynamic Light Scattering (DLS), zeta potential measurements, UV-Visible spectrophotometry (UV-Vis), and Scanning Transmission Electron Microscopy (S(T)EM). Cyt C was loaded into the PEG-hydrogel-coated AuNPs using a modified breathing-in method. Loading efficiencies (up to 80%), dependent on particle geometry, concentration, and hydrogel content, were obtained. Release experiments conducted at high temperature (40 °C) and acidic pH (3) showed higher release for larger sizes of PEG-hydrogel-coated AuNPs, with temporal transition from spherical to thin film release geometry. AuNP shape, size, number density, and hydrogel content are found to influence the loading as well as release kinetics of Cyt C from these systems.

Adhesive cell cultivation on polymer particle having grafted epoxy polymer chain.

In this study, we synthesized a new cell immobilization support having poly(glycidyl methacrylate) as a graft polymer chain and used this support for cell cultivation. Base polymer particle was synthesized by suspension polymerization and epoxy polymer chain was extended from particle surface on graft polymerization. Produced polymer particles had broad particle size distribution ranging from 20 to 1000 µm and the degree of polymerization of grafted polymer chain was ranged from 500 to 1000. The effects of various factors, such as grafted polymer chain length and its surface density, composition of base polymer network and graft polymer chain, on the cell growth of murine fibroblast cell line (MS-5 cell) on polymer particle were studied. This polymer particle could cultivate not only fibroblast cell line but also epidermal cell line (HeLa cell), osteoblast cell line (MC3T3E1 cell), and chondrocyte cell line (ch-8 cell) on its surface. Growth rate is almost the same as that of cells using poly(styrene) tissue culture dish. To apply this cell cultivation system for examination of cell co-culture, HeLa cell immobilized on 100 µm of polymer particle was successfully co-cultured with MS-5 cell immobilized on 300 µm of polymer particle for four weeks.

Novel three-dimensional long-term bone marrow culture system using polymer particles with grafted epoxy-polymer-chains supports the proliferation and differentiation of hematopoietic stem cells.

Hematopoiesis occurs in the bone marrow, where primitive hematopoietic cells proliferate and differentiate in close association with a three-dimensional (3D) hematopoietic microenvironment composed of stromal cells. We examined the hematopoietic supportive ability of stromal cells in a 3D culture system using polymer particles with grafted epoxy polymer chains. Umbilical cord blood-derived CD34(+) cells were co-cultivated with MS-5 stromal cells. They formed a 3D structure in the culture dish in the presence of particles, and the total numbers of cells and the numbers of hematopoietic progenitor cells, including colony-forming unit (CFU)-Mix, CFU-granulocyte-macrophage, CFU-megakaryocyte and burst-forming unit-erythroid, were measured every seven days. The hematopoietic supportive activity of the 3D culture containing polymer particles and stromal cells was superior to that of 2D culture, and allowed the expansion and maintenance of hematopoietic progenitor cells for more than 12 weeks. Various types of hematopoietic cells, including granulocytes, macrophages and megakaryocytes at different maturation stages, appeared in the 3D culture, suggesting that the CD34(+) cells were able to differentiate into a range of blood cell types. Morphological examination showed that MS-5 stromal cells grew on the surface of the particles and bridged the gaps between them to form a 3D structure. Hematopoietic cells slipped into the 3D layer and proliferated within it, relying on the presence of the MS-5 cells. These results suggest that this 3D culture system using polymer particles reproduced the hematopoietic phenomenon in vitro, and might thus provide a new tool for investigating hematopoietic stem cell-stromal cell interactions.

Preparation of uniform monomer droplets using packed column and continuous polymerization in tube reactor.

A two-step continuous emulsification and polymerization process was developed in which monomer droplets having narrow size distribution were prepared and polymerized while retaining their monodispersity. In the emulsification step, a column packed with glass beads, of diameters ranging from 70microm to 1mm, was used to prepare a monomer O/W emulsion. Monomer droplets were dispersed with an aqueous solution of poly(vinyl alcohol) (PVA). The droplet size and -distribution was studied with respect to the effects of diameter of glass beads, concentration of PVA in water phase, degree of polymerization of PVA, ratio of mass flow of water phase to that of oil phase, linear velocity of water phase and viscosity of water phase and oil phase. Droplet size was found to be strongly dependent on the diameter of the packed glass beads, while the droplet size distribution was affected by the viscosities of the continuous and dispersed phases. Increasing the viscosity of the dispersed phase by addition of poly(styrene) to the monomer mixture resulted in a narrow size distribution of glycidyl methacrylate-ethylene glycol dimethacrylate droplets. Furthermore, these initiator-containing monomer droplets were polymerized by heating in a tubular reactor, from which polymer particles with a narrow size distribution could be synthesized.