RESUMO
Aerophilic surfaces immersed underwater trap films of air known as plastrons. Plastrons have typically been considered impractical for underwater engineering applications due to their metastable performance. Here, we describe aerophilic titanium alloy (Ti) surfaces with extended plastron lifetimes that are conserved for months underwater. Long-term stability is achieved by the formation of highly rough hierarchically structured surfaces via electrochemical anodization combined with a low-surface-energy coating produced by a fluorinated surfactant. Aerophilic Ti surfaces drastically reduce blood adhesion and, when submerged in water, prevent adhesion of bacteria and marine organisms such as barnacles and mussels. Overall, we demonstrate a general strategy to achieve the long-term stability of plastrons on aerophilic surfaces for previously unattainable underwater applications.
RESUMO
Vimentin is a highly charged intermediate filament protein that inherently forms extended dimeric coiled coils, which serve as the basic building blocks of intermediate filaments. Under low ionic strength conditions, vimentin filaments dissociate into uniform tetrameric complexes of two anti-parallel-oriented, half-staggered coiled-coil dimers. By addition of salt, vimentin tetramers spontaneously reassemble into filaments in a time-dependent process: 1) lateral assembly of tetramers into unit-length filaments, 2) longitudinal annealing of unit-length filaments, and 3) longitudinal assembly of filaments coupled with subsequent radial compaction. To independently determine the lateral and longitudinal assembly kinetics, we measure with a stopped-flow instrument the static light scattering signal at two different wavelengths (405 and 594 nm) with a temporal resolution of 3 ms and analyze the signals based on Rayleigh-Gans theory. This theory considers that the intensity of the scattered light depends not only on the molecular weight of the scattering object but also on its shape. This shape dependence is more pronounced at shorter wavelengths, allowing us to decompose the scattered light signal into its components arising from lateral and longitudinal filament assembly. We demonstrate that both the lateral and longitudinal filament assembly kinetics increase with salt concentration.
Assuntos
Citoesqueleto , Filamentos Intermediários , Filamentos Intermediários/metabolismo , Vimentina , Cinética , Citoesqueleto/metabolismo , Concentração OsmolarRESUMO
AIMS: Desminopathies comprise hereditary myopathies and cardiomyopathies caused by mutations in the intermediate filament protein desmin that lead to severe and often lethal degeneration of striated muscle tissue. Animal and single cell studies hinted that this degeneration process is associated with massive ultrastructural defects correlating with increased susceptibility of the muscle to acute mechanical stress. The underlying mechanism of mechanical susceptibility, and how muscle degeneration develops over time, however, has remained elusive. METHODS: Here, we investigated the effect of a desmin mutation on the formation, differentiation, and contractile function of in vitro-engineered three-dimensional micro-tissues grown from muscle stem cells (satellite cells) isolated from heterozygous R349P desmin knock-in mice. RESULTS: Micro-tissues grown from desmin-mutated cells exhibited spontaneous unsynchronised contractions, higher contractile forces in response to electrical stimulation, and faster force recovery compared with tissues grown from wild-type cells. Within 1 week of culture, the majority of R349P desmin-mutated tissues disintegrated, whereas wild-type tissues remained intact over at least three weeks. Moreover, under tetanic stimulation lasting less than 5 s, desmin-mutated tissues partially or completely ruptured, whereas wild-type tissues did not display signs of damage. CONCLUSIONS: Our results demonstrate that the progressive degeneration of desmin-mutated micro-tissues is closely linked to extracellular matrix fibre breakage associated with increased contractile forces and unevenly distributed tensile stress. This suggests that the age-related degeneration of skeletal and cardiac muscle in patients suffering from desminopathies may be similarly exacerbated by mechanical damage from high-intensity muscle contractions. We conclude that micro-tissues may provide a valuable tool for studying the organization of myocytes and the pathogenic mechanisms of myopathies.
Assuntos
Cardiomiopatias , Desmina , Músculos , Animais , Cardiomiopatias/genética , Desmina/genética , Humanos , Camundongos , Músculo Esquelético/patologia , Músculos/patologia , Mutação , Células-Tronco/metabolismo , Células-Tronco/patologiaRESUMO
Wegener's granulomatosis (WG) is a form of systemic vasculitis characterized by granulomatous inflammation of the upper and lower airways, vasculitis, and necrotizing glomerulonephritis. It is strongly associated with anti-neutrophil cytoplasmic antibodies against proteinase 3 (PR3-ANCAs). Various in vitro observations provided strong evidence that autoimmune PR3-ANCAs are directly involved in glomerular and vascular inflammation. However, little is known about the pathogenic significance of PR3-ANCAs in vivo. Therefore, the generation of animal models helped to validate the suggested autoimmune origin and pathophysiology in WG. To characterize and improve the models, numerous studies were carried out to elucidate the effect of mouse/rat PR3-ANCAs on neutrophil function as well as the role of CD4/CD8 in T and B cells and antibodies in the pathogenesis of the disease. Understanding the pathogenesis is therefore critical to relate these models to human studies hoping that they will be useful for better insight of WG and the development of specific therapies for the disease.
Assuntos
Granulomatose com Poliangiite , Animais , Anticorpos Anticitoplasma de Neutrófilos , Camundongos , Mieloblastina , Neutrófilos , RatosRESUMO
Metallic materials are commonly used for load-bearing implants and as internal fixation devices. It is customary to use austenitic stainless steel, especially surgical grade type 316L SS as temporary and Ti alloys as permanent implants. However, long-term, poor bonding with bone, corrosion, and release of metal ions, such as chromium and nickel occur. These ions are powerful allergens and carcinogens and their uncontrolled leaching may be avoided by surface coatings. Therefore, bioactive glasses (BGs) became a vital biomedical material, which can form a biologically active phase of hydroxycarbonate apatite on their surface when in contact with physiological fluids. To reduce the high coefficient of friction and the brittle nature of BGs, polymers are normally incorporated to avoid the high-temperature sintering/densification of ceramic-only coatings. For medical application, electrophoretic deposition (EPD) is now used for polymer (organic) and ceramic (inorganic) components at room temperature due to its simplicity, control of coating thickness and uniformity, low cost of equipment, ability to coat substrates of intricate shape and to supply thick films in composite form, high purity of deposits as well as no phase transformation during coating. Although extensive research has been conducted on polymer/inorganic composite coatings, only some studies have reported multifunctional properties, such as biological antibacterial activity, enhanced cell adhesion, controlled drug release ability, and mechanical properties. This review will focus on biodegradable coatings, including zien, chitosan, gelatin, cellulose loaded with antibacterial drugs/metallic ions/natural herbs on biostable substrates (PEEK/PMMA/PCL/PLLA layers), which have the potential of multifunctional coating for metallic implants.
Assuntos
Antibacterianos/química , Materiais Biocompatíveis/química , Implantes de Medicamento/química , Teste de Materiais/métodos , Metais/química , Ligas/administração & dosagem , Ligas/química , Ligas/metabolismo , Animais , Antibacterianos/administração & dosagem , Antibacterianos/metabolismo , Materiais Biocompatíveis/administração & dosagem , Materiais Biocompatíveis/metabolismo , Quitosana/administração & dosagem , Quitosana/química , Quitosana/metabolismo , Implantes de Medicamento/administração & dosagem , Implantes de Medicamento/metabolismo , Gelatina/administração & dosagem , Gelatina/química , Gelatina/metabolismo , Humanos , Metais/administração & dosagem , Metais/metabolismoRESUMO
In this study, as a measure to enhance the antimicrobial activity of biomaterials, the selenium ions have been substituted into hydroxyapatite (HA) at different concentration levels. To balance the potential cytotoxic effects of selenite ions (SeO32-) in HA, strontium (Sr2+) was co-substituted at the same concentration. Selenium and strontium-substituted hydroxyapatites (Se-Sr-HA) at equal molar ratios of x Se/(Se + P) and x Sr/(Sr + Ca) at (x = 0, 0.01, 0.03, 0.05, 0.1, and 0.2) were synthesized via the wet precipitation route and sintered at 900 °C. The effect of the two-ion concentration on morphology, surface charge, composition, antibacterial ability, and cell viability were studied. X-ray diffraction verified the phase purity and confirmed the substitution of selenium and strontium ions. Acellular in vitro bioactivity tests revealed that Se-Sr-HA was highly bioactive compared to pure HA. Se-Sr-HA samples showed excellent antibacterial activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus carnosus) bacterial strains. In vitro cell-material interaction, using human osteosarcoma cells MG-63 studied by WST-8 assay, showed that Se-HA has a cytotoxic effect; however, the co-substitution of strontium in Se-HA offsets the negative impact of selenium and enhanced the biological properties of HA. Hence, the prepared samples are a suitable choice for antibacterial coatings and bone filler applications.
Assuntos
Antibacterianos/síntese química , Antibacterianos/farmacologia , Hidroxiapatitas/química , Selênio/química , Estrôncio/química , Antibacterianos/efeitos adversos , Antibacterianos/química , Sobrevivência Celular/efeitos dos fármacos , Staphylococcus/efeitos dos fármacosRESUMO
Hyper-activation of extracellular signal-regulated kinase (ERK) 1/2 contributes to heart dysfunction in cardiomyopathy caused by mutations in the lamin A/C gene (LMNA cardiomyopathy). The mechanism of how this affects cardiac function is unknown. We show that active phosphorylated ERK1/2 directly binds to and catalyzes the phosphorylation of the actin depolymerizing factor cofilin-1 on Thr25. Cofilin-1 becomes active and disassembles actin filaments in a large array of cellular and animal models of LMNA cardiomyopathy. In vivo expression of cofilin-1, phosphorylated on Thr25 by endogenous ERK1/2 signaling, leads to alterations in left ventricular function and cardiac actin. These results demonstrate a novel role for cofilin-1 on actin dynamics in cardiac muscle and provide a rationale on how increased ERK1/2 signaling leads to LMNA cardiomyopathy.
Assuntos
Actinas/metabolismo , Cardiomiopatia Dilatada/patologia , Cofilina 1/metabolismo , Lamina Tipo A/genética , Proteína Quinase 1 Ativada por Mitógeno/metabolismo , Proteína Quinase 3 Ativada por Mitógeno/metabolismo , Mutação , Actinas/genética , Adolescente , Adulto , Animais , Cardiomiopatia Dilatada/genética , Cardiomiopatia Dilatada/metabolismo , Estudos de Casos e Controles , Cofilina 1/genética , Feminino , Coração/fisiologia , Humanos , Lamina Tipo A/metabolismo , Masculino , Camundongos , Pessoa de Meia-Idade , Proteína Quinase 1 Ativada por Mitógeno/genética , Proteína Quinase 3 Ativada por Mitógeno/genética , Fosforilação , Transdução de Sinais , Adulto JovemRESUMO
The cytoskeleton is a complex network interlinking filaments that extend throughout the cytoplasm from the nucleus to the plasma membrane. Three major types of filaments are found in the cytoskeleton: actin filaments, microtubules, and intermediate filaments. They play a key role in the ability of cells to both resist mechanical stress and generate force. However, the precise involvement of intermediate filament proteins in these processes remains unclear. Here, we focused on nuclear A-type lamins, which are connected to the cytoskeleton via the Linker of Nucleoskeleton and Cytoskeleton (LINC) complex. Using micro-constriction rheology, we investigated the impact of A-type lamins (p.H222P) mutation on the mechanical properties of muscle cells. We demonstrate that the expression of point mutation of lamin A in muscle cells increases cellular stiffness compared with cells expressing wild type lamin A and that the chemical agent selumetinib, an inhibitor of the ERK1/2 signaling, reversed the mechanical alterations in mutated cells. These results highlight the interplay between A-type lamins and mechano-signaling, which are supported by cell biology measurements.
Assuntos
Lamina Tipo A/genética , Fibras Musculares Esqueléticas/citologia , Mutação Puntual , Animais , Fenômenos Biomecânicos , Linhagem Celular , Lamina Tipo A/metabolismo , Sistema de Sinalização das MAP Quinases , Camundongos , Fibras Musculares Esqueléticas/metabolismoRESUMO
Living cells interact with the extracellular matrix (ECM) transducing biochemical signals into mechanical cues and vice versa. Thanks to this mechano-transduction process, cells modify their internal organization and upregulate their physiological functions differently. In this complex mechanism integrins play a fundamental role, connecting the extracellular matrix with the cytoskeleton. Cytoskeletal rearrangements, such as the increase of the overall contractility, impact cell mechanical properties, the entire cell stiffness, and cell deformability. How cell mechanics is influenced via different integrins and their interaction with ECM in health and disease is still unclear. Here, we investigated the influence of αvß3 integrin expression on the mechanics of human melanoma M21 cells using atomic force microscopy and micro-constriction. Evidence is provided that (i) αvß3 integrin expression in human melanoma cells increases cell stiffness in both adherent and non-adherent conditions; (ii) replacing αvß3 with αIIbß3 integrin in melanoma cells, cell stiffness is increased under adherent, while decreased under non-adherent conditions; (iii) αvß3 integrin cell stiffening is also maintained when cells adhere to fibronectin, but this phenomenon does not strongly depend on the fibronectin concentration. In all, this study sheds light on the role of αvß3 in regulating cellular mechanics.
Assuntos
Integrina alfaVbeta3/metabolismo , Melanoma/metabolismo , Melanoma/patologia , Linhagem Celular Tumoral , Módulo de Elasticidade , Elasticidade , Humanos , Integrina alfa5beta1/metabolismo , Microscopia de Força Atômica , Complexo Glicoproteico GPIIb-IIIa de Plaquetas/metabolismoRESUMO
Intermediate filaments (IFs) are principal components of the cytoskeleton, a dynamic integrated system of structural proteins that provides the functional architecture of metazoan cells. They are major contributors to the elasticity of cells and tissues due to their high mechanical stability and intrinsic flexibility. The basic building block for the assembly of IFs is a rod-like, 60-nm-long tetrameric complex made from two antiparallel, half-staggered coiled coils. In low ionic strength, tetramers form stable complexes that rapidly assemble into filaments upon raising the ionic strength. The first assembly products, "frozen" by instantaneous chemical fixation and viewed by electron microscopy, are 60-nm-long "unit-length" filaments (ULFs) that apparently form by lateral in-register association of tetramers. ULFs are the active elements of IF growth, undergoing longitudinal end-to-end annealing with one another and with growing filaments. Originally, we have employed quantitative time-lapse atomic force and electron microscopy to analyze the kinetics of vimentin-filament assembly starting from a few seconds to several hours. To obtain detailed quantitative insight into the productive reactions that drive ULF formation, we now introduce a "stopped-flow" approach in combination with static light-scattering measurements. Thereby, we determine the basic rate constants for lateral assembly of tetramers to ULFs. Processing of the recorded data by a global fitting procedure enables us to describe the hierarchical steps of IF formation. Specifically, we propose that tetramers are consumed within milliseconds to yield octamers that are obligatory intermediates toward ULF formation. Although the interaction of tetramers is diffusion controlled, it is strongly driven by their geometry to mediate effective subunit targeting. Importantly, our model conclusively reflects the previously described occurrence of polymorphic ULF and mature filaments in terms of their number of tetramers per cross section.
Assuntos
Filamentos Intermediários/metabolismo , Multimerização Proteica , Vimentina/química , Humanos , Cinética , Modelos Moleculares , Estrutura Quaternária de ProteínaRESUMO
Intermediate filaments (IFs) are one of the three types of cytoskeletal polymers that resist tensile and compressive forces in cells. They crosslink each other as well as with actin filaments and microtubules by proteins, which include desmin, filamin C, plectin, and lamin (A/C). Mutations in these proteins can lead to a wide range of pathologies, some of which exhibit mechanical failure of the skin, skeletal, or heart muscle.
Assuntos
Filamentos Intermediários/metabolismo , Desmina/metabolismo , Filaminas/metabolismo , Filamentos Intermediários/química , Filamentos Intermediários/genética , Lamina Tipo A/metabolismo , Plectina/metabolismoRESUMO
The focal adhesion protein vinculin has been implicated in associating with soluble and membranous phospholipids. Detailed investigations over the past ten years describe the intermolecular interactions of the vinculin tail domain with soluble and membrane phospholipids. Previous studies have implied that the tail's unstructured C-terminal region affects the mechanical behavior of cells and that the same region, at the molecular level, has bi-stable behavior sensitive to different protonation states. The aim of this short communication is to discuss whether the C-terminal vinculin tail (Vt) domain interacts favorably with membrane-embedded phospholipids such as PIP2 and that the region is also an anchor for lipid membranes.
Assuntos
Fosfolipídeos/metabolismo , Vinculina/metabolismo , Animais , Dicroísmo Circular , Bicamadas Lipídicas/metabolismo , Simulação de Dinâmica Molecular , Fosfatidilinositol 4,5-Difosfato/química , Fosfatidilinositol 4,5-Difosfato/metabolismo , Fosfolipídeos/química , Ligação Proteica , Domínios Proteicos , Vinculina/químicaRESUMO
Biodegradable and bioresorbable polyesters (BBPEs) are a widespread class of aliphatic polymers with a plethora of applications in the medical field. Some reports speculate that these polymers have intrinsic antibacterial activity as a consequence of their acidic degradation by-products. The release of organic acids as a result of the hydrolytic degradation of BBPEs in vivo and the resulting pH drop could be an effective inhibitor of the growth of pathogens in the local environment adjacent to BBPE-based devices. However, there is no clear and conclusive evidence in the literature concerning the antibacterial activity of BBPE to support or refute this hypothesis. In this communication we address this point through an assessment of the antibacterial properties of six well-established commercially available BBPEs. Agar diffusion assays and optical density measurements at 600 nm were performed on all the polymer samples to characterize the growth of bacteria and any potential inhibition over an incubation period of 24 h. The results indicated that BBPEs do not possess an intrinsic and immediate antibacterial activity, which is consistent with the clear mismatch between the time-scales for bacterial growth and the rate of degradation of the polyesters.
Assuntos
Implantes Absorvíveis , Antibacterianos/farmacologia , Materiais Biocompatíveis/farmacologia , Poliésteres/farmacologia , Antibacterianos/química , Materiais Biocompatíveis/química , Escherichia coli , Hidroxibutiratos/química , Hidroxibutiratos/farmacologia , Ácido Láctico/química , Ácido Láctico/farmacologia , Testes de Sensibilidade Microbiana , Poliésteres/química , Ácido Poliglicólico/química , Ácido Poliglicólico/farmacologia , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Staphylococcus aureusRESUMO
The focal adhesion protein vinculin connects the actin cytoskeleton, through talin and integrins, with the extracellular matrix. Vinculin consists of a globular head and tail domain, which undergo conformational changes from a closed auto-inhibited conformation in the cytoplasm to an open conformation in focal adhesions. Src-mediated phosphorylation has been suggested to regulate this conformational switch. To explore the role of phosphorylation in vinculin activation, we used knock-out mouse embryonic fibroblasts re-expressing different vinculin mutants in traction microscopy, magnetic tweezer microrheology, FRAP and actin-binding assays. Compared to cells expressing wild-type or constitutively active vinculin, we found reduced tractions, cytoskeletal stiffness, adhesion strength, and increased vinculin dynamics in cells expressing constitutively inactive vinculin or vinculin where Src-mediated phosphorylation was blocked by replacing tyrosine at position 100 and/or 1065 with a non-phosphorylatable phenylalanine residue. Replacing tyrosine residues with phospho-mimicking glutamic acid residues restored cellular tractions, stiffness and adhesion strength, as well as vinculin dynamics, and facilitated vinculin-actin binding. These data demonstrate that Src-mediated phosphorylation is necessary for vinculin activation, and that phosphorylation controls cytoskeletal mechanics by regulating force transmission between the actin cytoskeleton and focal adhesion proteins.
Assuntos
Adesão Celular/fisiologia , Citoesqueleto/fisiologia , Vinculina/fisiologia , Animais , Transferência de Energia , Fibroblastos/fisiologia , Fibroblastos/ultraestrutura , Integrinas/metabolismo , Camundongos , Camundongos Knockout , Fosforilação , Mutação Puntual , Estrutura Secundária de Proteína , Quinases da Família src/fisiologiaRESUMO
Mutations in the cytoskeletal linker protein plectin result in multisystemic diseases affecting skin and muscle with indications of additional vascular system involvement. To study the mechanisms underlying vascular disorders, we established plectin-deficient endothelial cell and mouse models. We show that apart from perturbing the vimentin cytoskeleton of endothelial cells, plectin deficiency leads to severe distortions of adherens junctions (AJs), as well as tight junctions, accompanied by an upregulation of actin stress fibres and increased cellular contractility. Plectin-deficient endothelial cell layers were more leaky and showed reduced mechanical resilience in fluid-shear stress and mechanical stretch experiments. We suggest that the distorted AJs and upregulated actin stress fibres in plectin-deficient cells are rooted in perturbations of the vimentin cytoskeleton, as similar phenotypes could be mimicked in wild-type cells by disruption of vimentin filaments. In vivo studies in endothelium-restricted conditional plectin-knockout mice revealed significant distortions of AJs in stress-prone aortic arch regions and increased pulmonary vascular leakage. Our study opens a new perspective on cytoskeleton-controlled vascular permeability, where a plectin-organized vimentin scaffold keeps actomyosin contractility 'in-check' and maintains AJ homeostasis.
Assuntos
Actinas/metabolismo , Células Endoteliais/metabolismo , Plectina/metabolismo , Vimentina/metabolismo , Animais , Permeabilidade Capilar , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Knockout , Camundongos Transgênicos , Plectina/genética , Estresse MecânicoRESUMO
Integrins play an important role in cell adhesion, morphology, migration, and many other physiological processes. The role of αvß3 integrin has been intensively investigated in the past. However, much is still unclear about its selective role in cell contractility, adhesion, and mechanics. We looked at the influence of αvß3 integrin on the cell mechanics of adherent M21 and suspended K562 cells with a microconstriction assay and found that the expression of αvß3 integrin leads to higher cell stiffness and decreased fluidity in both cell lines. The disruption of the actin cytoskeleton decreased cellular stiffness in M21 (expressing α5ß1 and αvß3 integrins) and M21L (expressing only α5ß1 integrin) cell lines in a similar way, but did not lead to the same baseline stiffness. The activation of integrins after the addition of Mn(2+) led to higher stiffness in all observed cell lines, independent of αvß3 integrin expression and disruption of the actin cytoskeleton. In summary, these results show that differences in stiffness/fluidity due to αvß3 integrin expression or integrin activation by Mn(2+) might not simply be explained by the coupling of integrins to actin via focal adhesions, which in turn induces changes in the actin cytoskeleton, but also by other cellular components such as the cell nucleus, intermediate filaments, or microtubules.
Assuntos
Forma Celular , Integrina alfaVbeta3/metabolismo , Fenômenos Biomecânicos , Linhagem Celular Tumoral , Fluorescência , Humanos , Integrina alfa5beta1/metabolismo , Células K562 , Dispositivos Lab-On-A-ChipRESUMO
Cell-matrix adhesion and cell-cell contacts are essential for the metabolism, protein synthesis, survival, and cancer metastasis of cells. Major transmembrane receptors are the integrins, which are responsible for cell-matrix adhesions, and the cadherins, which are important for cell-cell adhesions. Adherent cells anchor via focal adhesion proteins to the extracellular matrix, whereas cell-cell contacts connect via focal adherens junction proteins. The temporal formation of these connections is greatly strengthened either through externally applied stresses on the cell or by myosin-driven cell contractility. The mechanism by which protein(s) within these connections sense, transmit, and respond to mechanochemical signaling is currently strongly debated and various candidates have been named. Vinculin has been described as one of the key players in cell-matrix and cell-cell adhesions that build a strong physical connection for transmitting forces between the cytoskeleton, the extracellular matrix, and cell-cell connections.
Assuntos
Mecanotransdução Celular/fisiologia , Vinculina/metabolismo , Actinas/metabolismo , Junções Aderentes/metabolismo , Adesão Celular , Proteína Substrato Associada a Crk/metabolismo , Matriz Extracelular/metabolismo , Humanos , Integrinas/metabolismo , Ligação Proteica , Vinculina/químicaRESUMO
Plectin is the prototype of an intermediate filament (IF)-based cytolinker protein. It affects cells mechanically by interlinking and anchoring cytoskeletal filaments and acts as scaffolding and docking platform for signaling proteins to control cytoskeleton dynamics. The most common disease caused by mutations in the human plectin gene, epidermolysis bullosa simplex with muscular dystrophy (EBS-MD), is characterized by severe skin blistering and progressive muscular dystrophy. Therefore, we compared the biomechanical properties and the response to mechanical stress of murine plectin-deficient myoblasts and keratinocytes with wild-type cells. Using a cell stretching device, plectin-deficient myoblasts exhibited lower mechanical vulnerability upon external stress compared to wild-type cells, which we attributed to lower cellular pre-stress. Contrary to myoblasts, wild-type and plectin-deficient keratinocytes showed no significant differences. In magnetic tweezer measurements using fibronectin-coated paramagnetic beads, the stiffness of keratinocytes was higher than of myoblasts. Interestingly, cell stiffness, adhesion strength, and cytoskeletal dynamics were strikingly altered in plectin-deficient compared to wild-type myoblasts, whereas smaller differences were observed between plectin-deficient and wild-type keratinocytes, indicating that plectin might be more important for stabilizing cytoskeletal structures in myoblasts than in keratinocytes. Traction forces strongly correlated with the stiffness of plectin-deficient and wild-type myoblasts and keratinocytes. Contrary to that cell motility was comparable in plectin-deficient and wild-type myoblasts, but was significantly increased in plectin-deficient compared to wild-type keratinocytes. Thus, we postulate that the lack of plectin has divergent implications on biomechanical properties depending on the respective cell type.