RESUMO
The high expression of Spermidine/spermine N1-acetyltransferase (SSAT-1) is an important indicator in early cancer diagnosis. Here, we developed a nanopore-based methodology with γ-cyclodextrin as an adaptor to detect and quantify acetylamantadine, the specific SSAT-1-catalyzed product from amantadine, to accordingly reflect the activity of SSAT-1. We employ γ-cyclodextrin and report that amantadine cannot cause any secondary signals in γ-cyclodextrin-assisted α-HL nanopore, while its acetylation product, acetylamantadine, does. This allows γ-cyclodextrin to practically detect acetylamantadine in the interference of excessive amantadine, superior to the previously reported ß-cyclodextrin. The quantification of acetylamantadine was not interfered with even a 50-fold amantadine and displayed no interference in artificial urine sample analysis, which indicates the good feasibility of this nanopore-based methodology in painless cancer prediagnosis. In addition, the discrimination mechanism is also explored by 2-D nuclear magnetic resonance (NMR) and nanopore experiments with a series of adamantane derivatives with different hydrophilic and hydrophobic groups. We found that both the hydrophobic region matching effect and hydrophilic interactions play a synergistic effect in forming a host-guest complex to further generate the characteristic signals, which may provide insights for the subsequent design and study of drug-cyclodextrin complexes.
Assuntos
Amantadina , Nanoporos , gama-Ciclodextrinas , gama-Ciclodextrinas/química , Humanos , Amantadina/química , Amantadina/análise , NeoplasiasRESUMO
Modulating mass transfer is crucial for optimizing the catalytic and separation performances of porous materials. Here, we systematically developed a series of continuously tunable MOFs (CTMOFs) that exhibit incessantly increased mass transfer. This was achieved through the strategic blending of ligands with different lengths and ratios in MOFs featuring the fcu topology. By employing a proportional mixture of two ligands in the synthesis of UiO-66, the micropores expanded, facilitating faster mass transfer. The mass transfer rate was evaluated by dye adsorption, dark-field microscopy, and gas chromatography (GC). The GC performance proved that both too-fast and too-slow mass transfer led to low separation performance. The optimized mass transfer in CTMOFs resulted in an exceptionally high separation resolution (5.96) in separating p-xylene and o-xylene. Moreover, this study represents the first successful use of MOFs for high-performance separation of propylene and propane by GC. This strategy provides new inspiration in regulating mass transfer in porous materials.
RESUMO
The wrinkles are pervasive in ultrathin two-dimensional (2D) materials, but the regulation of wrinkles is rarely explored systematically. However, the regulation of wrinkles at nanometer scale is merely explored. Here, we employed a series of carboxylic acids (from formic acid to octanoic acid) to control the wrinkles of Zr-BTB (BTB = 1, 3, 5-(4-carboxylphenyl)-benzene) metal-organic framework (MOF) nanosheet. The wrinkles at the micrometer scale were observed with transmission electron microscopy. Furthermore, high-angle annular dark-field (HAADF) images showed lattice distortion in many nanoscale regions, which was precisely matched to the nano-wrinkles. With the changes of hydrophilicity/hydrophobicity, MOF-MOF and MOF-solvent interactions were synergistically regulated and wrinkles with different sizes were obtained, which was supported by HAADF, molecular dynamics and density functional theory calculation. Different wrinkle sizes resulted in different pore sizes between the Zr-BTB nanosheet interlayers, providing highly-oriented thin films and the successive optimization of kinetic diffusion pathways, proved by grazing-incidence wide-angle X-ray scattering and nitrogen adsorption. The most suitable wrinkle pore from Zr-BTB-C4 exhibited highly efficient chromatographic separation of the substituted benzene isomers. Our work provides a rational route for the modulation of nanoscale wrinkles and their stacked pores of MOF nanosheets and improves the separation abilities of MOFs.
RESUMO
Copper-based catalysts are widely explored in electrochemical CO2 reduction (CO2RR) because of their ability to convert CO2 into high-value-added multicarbon products. However, the poor stability and low selectivity limit the practical applications of these catalysts. Here, we proposed a simple and efficient asymmetric low-frequency pulsed strategy (ALPS) to significantly enhance the stability and the selectivity of the Cu-dimethylpyrazole complex Cu3(DMPz)3 catalyst in CO2RR. Under traditional potentiostatic conditions, Cu3(DMPz)3 exhibited poor CO2RR performance with the Faradaic efficiency (FE) of 34.5% for C2H4 and FE of 5.9% for CH4 as well as the low stability for less than 1 h. We optimized two distinguished ALPS methods toward CH4 and C2H4, correspondingly. The high selectivities of catalytic product CH4 (FECH4 = 80.3% and above 76.6% within 24 h) and C2H4 (FEC2H4 = 70.7% and above 66.8% within 24 h) can be obtained, respectively. The ultralong stability for 300 h (FECH4 > 60%) and 145 h (FEC2H4 > 50%) was also recorded with the ALPS method. Microscopy (HRTEM, SAED, and HAADF) measurements revealed that the ALPS method in situ generated and stabilized extremely dispersive and active Cu-based clusters (â¼2.7 nm) from Cu3(DMPz)3. Meanwhile, ex situ spectroscopies (XPS, AES, and XANES) and in situ XANES indicated that this ALPS method modulated the Cu oxidation states, such as Cu(0 and I) with C2H4 selectivity and Cu(I and II) with CH4 selectivity. The mechanism under the ALPS methods was explored by in situ ATR-FTIR, in situ Raman, and DFT computation. The ALPS methods provide a new opportunity to boost the selectivity and stability of CO2RR.
RESUMO
The precise modulation of nanosheet stacking modes introduces unforeseen properties and creates momentous applications but remains a challenge. Herein, we proposed a strategy using bipolar molecules as torque wrenches to control the stacking modes of 2-D Zr-1,3,5-(4-carboxylphenyl)-benzene metal-organic framework (2-D Zr-BTB MOF) nanosheets. The bipolar phenyl-alkanes, phenylmethane (P-C1) and phenyl ethane (P-C2), predominantly instigated the rotational stacking of Zr-BTB-P-C1 and Zr-BTB-P-C2, displaying a wide angular distribution. This included Zr-BTB-P-C1 orientations at 0, 12, 18, and 24° and Zr-BTB-P-C2 orientations at 0, 6, 12, 15, 24, and 30°. With reduced polarity, phenyl propane (P-C3) and phenyl pentane (P-C5) introduced steric hindrance and facilitated alkyl hydrophobic interactions with the nanosheets, primarily resulting in the modulation of eclipsed stacking for Zr-BTB-P-C3 (64.8%) and Zr-BTB-P-C5 (93.3%) nanosheets. The precise angle distributions of four Zr-BTB-P species were in agreement with theoretical calculations. The alkyl induction mechanism was confirmed by the sequential guest replacement and 2-D 13C-1H heteronuclear correlation (HETCOR). In addition, at the single-particle level, we first observed that rotational stacked pores exhibited similar desorption rates for xylene isomers, while eclipsed stacked pores showed significant discrepancy for xylenes. Moreover, the eclipsed nanosheets as stationary phases exhibited high resolution, selectivity, repeatability, and durability for isomer separation. The universality was proven by another series of bipolar acetate-alkanes. This bipolar molecular torque wrench strategy provides an opportunity to precisely control the stacking modes of porous nanosheets.
RESUMO
Protein identification and discrimination at the single-molecule level are big challenges. Solid-state nanopores as a sensitive biosensor have been used for protein analysis, although it is difficult to discriminate proteins with similar structures in the traditional discrimination method based on the current blockage fraction. Here, we select ferritin and apo-ferritin as the model proteins that exhibit identical exterior and different interior structures and verify the practicability of their discrimination with flexibility features by the strategy of gradually decreasing the nanopore size. We show that the larger nanopore (relative to the protein size) has no obvious effect on discriminating two proteins. Then, the comparable-sized nanopore plays a key role in discriminating two proteins based on the dwell time and fraction distribution, and the conformational changes of both proteins are also studied with this nanopore. Finally, in the smaller nanopore, the protein molecules are trapped rather than translocated, where two proteins are obviously discriminated through the current fluctuation caused by the vibration of proteins. This strategy has potential in the discrimination of other important similar proteins.
Assuntos
Técnicas Biossensoriais , Nanoporos , Ferritinas , NanotecnologiaRESUMO
Selective recognition of short oligonucleotides at the single-molecule level is particularly important for early disease detection and treatment. In this work, polydopamine (PDA)-coated nanopores were prepared via self-polymerization as a solid-state nanopore sensing platform for the recognition of oligonucleotide C (PolyC). The PDA coating possesses abundant active sites, such as indole, amino, carboxyl, catechol, and quinone structures, which had interactions with short oligonucleotides to slow down the translocation rate. PDA-coated nanopores selectively interact with PolyC20 by virtue of differences in hydrogen bonding forces, generating a larger blocking current, while polyA and polyT demonstrated very small blockings. At the same time, PDA-coated nanopores can sensitively distinguish PolyC with different lengths, such as 20, 14, and 10 nt. The functionalization of PDA on the solid-state nanopore provides an opportunity for the rational design of the recognition surface for biomolecules.
Assuntos
Nanoporos , Oligonucleotídeos , Nanotecnologia , IndóisRESUMO
In separation science, precise control and regulation of the MOF stationary phase are crucial for achieving a high separation performance. We supposed that increasing the mass transfer resistance of MOFs with excessive porosity to achieve a moderate mass transfer resistance of the analytes is the key to conducting the MOF stationary phase with a high resolution. Three-dimensional UiO-67 (UiO-67-3D) and two-dimensional UiO-67 (UiO-67-2D) were chosen to validate this strategy. Compared with UiO-67-3D with overfast mass transfer and low retention, the reduced porosity of UiO-67-2D increased the mass transfer resistance of analytes in reverse, resulting in improved separation performance. Kinetic diffusion experiments were conducted to verify the difference in mass transfer resistance of the analytes between UiO-67-3D and UiO-67-2D. In addition, the optimization of the UiO-67-2D thickness for separation revealed that a moderate diffusion length of the analytes is more advantageous in achieving the equilibrium of absorption and desorption.
RESUMO
BACKGROUND: The association between thyroid hormone sensitivity and thyroid cancer is unknown, and we aimed to investigate the association between sensitivity to thyroid hormone indices and papillary thyroid carcinoma (PTC) in Chinese patients with thyroid nodules (TNs). METHODS: A total of 1,998 patients undergoing thyroid surgery due to TNs from Nanjing Drum Tower Hospital were included in this study. We evaluated central sensitivity to thyroid hormones, such as thyroid stimulating hormone index (TSHI), TSH T4 resistance index (TT4RI), thyroid feedback quantile-based index (TFQI), and parametric thyroid feedback quantile-based Index (PTFQI). Peripheral sensitivity to thyroid hormone was evaluated by FT3 to FT4 ratio. Multivariate logistic regression analysis was performed to evaluate the association between sensitivity to thyroid hormone indices and PTC risk. RESULTS: The results showed that central indices of thyroid hormone sensitivity, including TSHI, TT4RI, TFQI, and PTFQI, were positively associated with PTC risk. For each SD increase in TSHI, TT4RI, TFQI, and PTFQI, the odds ratios (OR, 95% CI) of PTC were 1.31 (1.18-1.46), 1.01 (1.01-1.02), 1.94 (1.45-2.60), and 1.82 (1.41-2.34), respectively. On the other hand, the association between peripheral sensitivity to thyroid hormone and PTC was significantly negative. For each SD increase in FT3/FT4 ratio, the OR (95% CI) of PTC was 0.18 (0.03-0.96), and a negative correlation was found between FT3/FT4 ratio and TNM staging of PTC. CONCLUSIONS: Sensitivity to thyroid hormone indices could be used as new indicators for predicting PTC in Chinese patients with TNs. Future researches are still needed to confirm our findings.
Assuntos
Neoplasias da Glândula Tireoide , Nódulo da Glândula Tireoide , Humanos , Câncer Papilífero da Tireoide/complicações , Nódulo da Glândula Tireoide/cirurgia , População do Leste Asiático , Hormônios Tireóideos , Neoplasias da Glândula Tireoide/epidemiologia , Neoplasias da Glândula Tireoide/cirurgia , Neoplasias da Glândula Tireoide/complicações , TireotropinaRESUMO
Peak broadening and peak tailing are common but rebarbative phenomena that always occur when using metal-organic frameworks (MOFs) as stationary phases. These phenomena result in diverse "low-performance" MOF stationary phases. Here, by adjusting the particle size of MOF stationary phases from microscale to nanoscale, we successfully enhance the separation abilities of these "low-performance" MOFs. Three zirconium-based MOFs (NU-1000, PCN-608, and PCN-222) with different organic ligands were synthesized with sizes of tens of micrometers and hundreds of nanometers, respectively. All the nanoscale MOFs exhibited exceedingly higher separation abilities than the respective microscale MOFs. The mechanism investigation proved that reducing the particle size can reduce the mass transfer resistance, thus enhancing the column efficiency by controlling the separation kinetics. Modulating the particle size of MOFs is an efficient way to enhance the separation capability of "low-performance" MOFs and to design high-performance MOF stationary phases.
RESUMO
Precise shaping of metal-organic frameworks (MOFs) is significant in both fundamental coordination chemistry and practical applications, such as catalysis, separation, and biomedicine. Herein, we demonstrated a linker scissoring strategy for precisely shaping MOFs through surface conformational pairing. In this strategy, the bidentate linkers which were designed according to the original tetratopic ligands and the coordination environment of MOF surfaces, were utilized as the covering agents. The shape of these covering agents and the surface conformation of metals onto MOFs restricted them to coordinate on specific MOF facets thus precisely controlling the shape of the MOFs. Different shapes of PCN-608 from nanoplate (PCN-NP) to nanorod (PCN-NR) have been targeted by adding different bidentate linkers. The universality of this strategy was demonstrated by controlling the shapes of the NU-MOFs from nanoplate to nanorod. This strategy provides a new guiding principle to synthesize MOF nanocrystals with controlled shapes.
Assuntos
Estruturas Metalorgânicas , Catálise , Cromatografia , Estruturas Metalorgânicas/química , Conformação MolecularRESUMO
Creating more exposed active sites on the metal-organic framework (MOF) surface is crucial for enhancing the recognition ability of MOF artificial receptors. Here, a copper-based MOF Cu(im)2 (im = imidazole) was utilized to act as an artificial receptor, inhibiting the activity of α-chymotrypsin. The shortest diazole ligand reduced the distance between regenerative copper sites, creating as many active sites as possible on the MOF unit surface. The amount of copper(ii) centers on the Cu(im)2 surface was calculated to be 4.96 × 106µm-2. Thus, Cu(im)2 showed exceedingly higher inhibition performance than other copper-based MOFs. The ChT activity was almost inhibited (88.8%) after the incubation with only 20 µg mL-1 Cu(im)2 for 10 min. The binding between ChT and Cu(im)2 was very fast with high affinity. Further results proved that Cu(im)2 inhibited the activity of ChT through electrostatic interactions and coordination interactions via the mixed inhibition mode. This strategy to use short ligands to create more active sites on the MOF surface provides a new direction to enhance the inhibition efficiency.
Assuntos
Estruturas Metalorgânicas , Cobre , LigantesRESUMO
The synthesis of a specific Sn plane as an efficient electrocatalyst for CO2 electrochemical reduction to generate fuels and chemicals is still a huge challenge. Density functional theory (DFT) calculations first reveal that the Sn(101) crystal plane is more advantageous for CO2 electroreduction. A metal-organic framework (MOF) precursor Sn-MOF has been carbonized and then etched to successfully fabricate Sn(101)/SnO2/C composites with good control of the carbonization time and the concentration of hydrochloric acid. The Sn(101) crystal plane of the catalyst could enhance the faradaic efficiency of formate to as high as 93.3% and catalytic stability up to 20 h. The promotion of the selectivity and activity by Sn(101) advances new possibilities for the rational design of high-activity Sn catalysts derived from MOFs.
RESUMO
High-efficiency photocatalysis in metal-organic frameworks (MOF) and MOF nanosheets (NSs) are often limited by their short-lived charge separation as well as self-quenching. Here, we propose to use the energy-transfer process (EnT) to increase charge separation, thus enhancing the catalytic performance of a series of MOF NSs. With the use of NS, the photocatalyst can also be well isolated to reduce self-quenching. Tetrakis(4-carboxyphenyl) porphyrin (H4 TCPP) and 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4 TBAPy) linkers were chosen as the acceptor and donor moieties, respectively. Accounting for the precise spatial design afforded by the MOF NSs, the donor and acceptor moieties could be closely positioned on the NSs, allowing for an efficient EnT process as well as a high degree of site isolation. Two templates, donor-on-acceptor NS and acceptor-on-donor NS catalysts, were successfully synthesized, and the results show that the second one has much enhanced catalytic performances over the first one due to site-isolated active photocatalysts.
RESUMO
The tuning of metal-organic framework (MOF) nanosheet stacking modes from molecular level was rarely explored although it significantly affected the properties and applications of nanosheets. Here, the different stacking modes of Zr-1, 3, 5-(4-carboxylphenyl)-benzene framework nanosheets were synthesized through the induction of different host-guest noncovalent interactions. The solvents of methyl benzene and ethyl acetate induced twisted stacking of nanosheets with the specific rotation angles of 12°, 18°, 24° and 6°, 18°, 24°, 30°, respectively, which was in agreement with theoretical calculations. Meanwhile, the alkanes were likely to vertically enter the pores of Zr-BTB nanosheets because of steric hindrance and hydrophobic interactions, resulting in the untwisted stacking of nanosheets. The untwisted ordered nanopores showed the excellent gas chromatographic separations of benzene derivative isomers, which was better than twisted nanosheets stacking and commercial columns. This work uncovers a rational strategy to control the stacking of two-dimensional MOF nanosheets.
RESUMO
The electrochemical reduction of CO2 presents a promising strategy to mitigate the greenhouse effect and reduce excess carbon dioxide emission to realize a carbon-neutral energy cycle, but it suffers from the lack of high-performance electrocatalysts. In this work, catalytic active cobalt porphyrin [TCPP(Co)=(5,10,15,20)-tetrakis(4-carboxyphenyl)porphyrin-CoII ] was precisely anchored onto water-stable 2D metal-organic framework (MOF) nanosheets (Zr-BTB) to obtain ultrathin 2D MOF nanosheets [TCPP(Co)/Zr-BTB] with accessible catalytic sites for the CO2 reduction reaction. Compared with molecular cobalt porphyrin, the TCPP(Co)/Zr-BTB exhibits an ultrahigh turnover frequency (TOF=4768â h-1 at -0.919â V vs. reversible hydrogen electrode, RHE) owing to high active-site utilization. In addition, three post-modified 2D MOF nanosheets [TCPP(Co)/Zr-BTB-PABA, TCPP(Co)/Zr-BTB-PSBA, TCPP(Co)/Zr-BTB-PSABA] were obtained, with the modifiers of p-(aminomethyl)benzoic acid (PABA), p-sulfobenzoic acid potassium (PSBA), and p-sulfamidobenzoic acid (PSABA), to change the micro-environments around TCPP(Co) through the tuning of steric effects. Among them, the TCPP(Co)/Zr-BTB-PSABA exhibited the best performance with a faradaic efficiency (FECO ) of 85.1 %, TOF of 5315â h-1 , and jtotal of 6â mA cm-2 at -0.769â V (vs. RHE). In addition, the long-term durability of the electrocatalysts is evaluated and the role of pH buffer is revealed.
RESUMO
Highly efficient enrichment of target glycopeptides plays a crucial role in glycoproteome research. Owing to their large surface area and excellent hydrophilicity, 2-D Hf-BTB nanosheets showed effective and selective enrichment of 78 glycopeptides derived from 29 glycoproteins with 90 N-glycosylation sites from just 2 µL of human serum.
RESUMO
It is urgent to find a catalyst with high selectivity and efficiency for the reduction of CO2 by renewable electric energy, which is the important means to reduce the greenhouse effect. In this work, we report that the metal-organic framework (MOF) indium-based 1,4-benzenedicarboxylate (In-BDC) catalyzes CO2 to formate with a Faradaic efficiency (FEHCOO-) of more than 80% in a wide voltage range between -0.419 and -0.769 V (vs. reversible hydrogen electrode, RHE). In-BDC performs at a maximum FEHCOO- of 88% at -0.669 V (vs. RHE) and a turnover frequency of up to 4798 h-1 at -1.069 V (vs. RHE). The long-term durability of 21 h and reusability of the electrocatalyst are clearly demonstrated. It opens up a new opportunity to utilize MOF with novel metal motifs for the efficient electroreduction of CO2.
RESUMO
Separation of monophosphopeptides from multi-phosphopeptides in complex biological samples is significant in the study of protein kinase signal transduction pathways. To the best of our knowledge, very few materials have been reported that could selectively enrich monophosphopeptides because of the chemical difficulty in retaining the intermediate monophosphopeptides and excluding both non-phosphopeptides and multi-phosphopeptides in acidic conditions, which requires unique interactions to balance the metallic affinity and the hydrophobicity. With the large surface area, abundant accessible active sites, and ultrathin structures, two-dimensional (2-D) metal-organic framework (MOF) Hf-1,3,5-tris(4-carboxyphenyl)benzene (BTB) nanosheets were rationally selected. Due to the elongated organic ligands and the balance between metallic affinity of clusters and hydrophobicity from ligands, the 2-D Hf-BTB nanosheets exhibited unique enrichment selectivity toward monophosphopeptides. The 2-D MOF nanosheets demonstrated excellent sensitivity (detection limit of 0.4 fmol µL-1) and selectivity [1:1000 molar ratios of ß-casein/BSA (bovine serum albumin)] in model phosphopeptides enrichment. The nanosheets were implemented for the analysis of nonfat milk and human saliva samples as well as in situ isotope labeling for dysregulated phosphopeptides from patients' serum with anal canal inflammation, exhibiting 6.6-fold upregulation of serum phosphopeptide HS4 (ADpSGEGDFLAEGGGVR) compared to the control healthy serum. The proteomics analysis of mouse brain cortical samples associated with Alzheimer's disease, which were from Akt (protein kinase B) conditional knockout mouse and littermate control mouse, was further established with 2-D Hf-BTB nanosheets. With high capture efficiency for monophosphopeptides, this method was capable of distinguishing the difference of monophosphopeptides from microtubule-associated protein τ (MAPT/τ) between the Akt knockout sample and control sample.
Assuntos
Estruturas Metalorgânicas/química , Nanoestruturas/química , Fosfopeptídeos/isolamento & purificação , Adulto , Doença de Alzheimer/metabolismo , Sequência de Aminoácidos , Animais , Humanos , Inflamação/sangue , Limite de Detecção , Camundongos Knockout , Leite/química , Fosfopeptídeos/sangue , Proctite/sangue , Proteômica/métodos , Proteínas Proto-Oncogênicas c-akt/genética , Saliva/química , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por MatrizRESUMO
Metal-organic frameworks (MOFs) have drawn great interest in recent decades due to their fascinating structures, unusual physical properties, versatile modification strategies, and biological compatibilities. In this review, we describe recent progress in the application of MOFs to matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). Owing to their high porosities, specific affinities, and photon absorption capacities, MOFs can be used as solid adsorbents to selectively capture peptides (including endogenous peptides, phosphopeptides, and glycopeptides) and as matrices in MALDI MS. Current developments in and future prospects for this field of research are also discussed.