EEBR induces Caspase-1-dependent pyroptosis through the NF-κB/NLRP3 signalling cascade in non-small cell lung cancer.

Lung cancer is a leading cause of cancer-related deaths worldwide. Recent studies have identified pyroptosis, a type of programmed cell death, as a critical process in the development and progression of lung cancer. In this study, we investigated the effect of EEBR, a new compound synthesized by our team, on pyroptosis in non-small cell lung cancer cells (NSCLC) and the underlying molecular mechanisms. Our results demonstrated that EEBR significantly reduced the proliferation and metastasis of NSCLC cells in vitro. Moreover, EEBR-induced pyroptosis in NSCLC cells, as evidenced by cell membrane rupture, the release of cytokines such as interleukin-18 and interleukin-1 beta and the promotion of Gasdermin D cleavage in a Caspase-1-dependent manner. Furthermore, EEBR promoted the nuclear translocation of NF-κB and upregulated the protein level of NLRP3. Subsequent studies revealed that EEBR-induced pyroptosis was suppressed by the inhibition of NF-κB. Finally, EEBR effectively suppressed the growth of lung cancer xenograft tumours by promoting NSCLC pyroptosis in animal models. Taken together, our findings suggest that EEBR induces Caspase-1-dependent pyroptosis through the NF-κB/NLRP3 signalling cascade in NSCLC, highlighting its potential as a candidate drug for NSCLC treatment.

A turn-on fluorescent probe for detecting and bioimaging of HOCl in inflammatory and liver disease models.

Hypochlorous acid (HOCl) is a common reactive oxygen species (ROS) associated with the development of liver, tumor, inflammatory, and other diseases. In this work, the turn-on fluorescent probe named (WZ-HOCl) with a naphthalimide structure was designed and synthesized to detect endogenous HOCl in disease models. WZ-HOCl can achieve a fast response to HOCl with good linearity in the range of 0-45 µM (LOD = 147 nM). The application of WZ-HOCl in bioimaging was investigated by constructing a series of cellular disease models, and the results showed that WZ-HOCl could sensitively detect endogenous HOCl in inflammatory and liver disease models. It can also be used to differentiate between hepatocytes and hepatoma cells. WZ-HOCl will provide new methods and ideas for fluorescent probes in detecting drug-induced liver injury, alcoholic and non-alcoholic steatohepatitis, and some inflammation-related diseases.

A Lipid Droplet-Specific NIR Fluorescent Probe with a Large Stokes Shift for In Vivo Visualization of Polarity in Contrast-Induced Acute Kidney Injury.

The research on lipid droplets (LDs) has attracted great attention in the field of biomedical science in recent years. LD malfunction is found to be associated with the development of acute kidney injury (AKI). To monitor this biological process and explain related pathological behavior, the development of excellent LD fluorescent probes with a polarity-sensitive character would provide a desirable strategy. Herein, we designed a new polarity-susceptible fluorescent probe named LD-B with LD targetability, which exhibits very weak fluorescence in highly polar solvents based on the twisted intramolecular charge transfer effect but enhanced fluorescence in low polar environments, enabling us to visualize polarity alteration. The probe LD-B also possesses the merits of intense near-infrared (NIR) emission, good photostability, large Stokes shift, low toxicity, faster metabolic rate, and wash-free ability; thereby, it would contribute to efficient LD fluorescence visualization application. Using LD-B via confocal laser scanning fluorescence imaging and a small-animal imaging system in vivo, we first manifested a prominent rise of LD polarity in contrast-induced AKI (CI-AKI), not only at the cellular level but also in animals in vivo. Furthermore, the in vivo studies suggest that LD-B could accumulate in the kidney. In addition, the normal cell lines (including kidney cells) exhibiting a greater polarity of LDs than the cancer cells have been demonstrated systemically. Altogether, our work presents an effective approach for the medical diagnosis of LDs related to CI-AKI and identification of potential therapeutic markers.

Tetrahydroberberrubine retards heart aging in mice by promoting PHB2-mediated mitophagy.

Heart aging is characterized by left ventricular hypertrophy and diastolic dysfunction, which in turn induces a variety of cardiovascular diseases. There is still no therapeutic drug to ameliorate cardiac abnormities in heart aging. In this study we investigated the protective effects of berberine (BBR) and its derivative tetrahydroberberrubine (THBru) against heart aging process. Heart aging was induced in mice by injection of D-galactose (D-gal, 120 mg · kg-1 · d-1, sc.) for 12 weeks. Meanwhile the mice were orally treated with berberine (50 mg · kg-1 · d-1) or THBru (25, 50 mg · kg-1 · d-1) for 12 weeks. We showed that BBR and THBru treatment significantly mitigated diastolic dysfunction and cardiac remodeling in D-gal-induced aging mice. Furthermore, treatment with BBR (40 µM) and THBru (20, 40 µM) inhibited D-gal-induced senescence in primary neonatal mouse cardiomyocytes in vitro. Overall, THBru exhibited higher efficacy than BBR at the same dose. We found that the levels of mitophagy were significantly decreased during the aging process in vivo and in vitro, THBru and BBR promoted mitophagy with different potencies. We demonstrated that the mitophagy-inducing effects of THBru resulted from increased mRNA stability of prohibitin 2 (PHB2), a pivotal factor during mitophagy, thereby upregulating PHB2 protein expression. Knockdown of PHB2 effectively reversed the antisenescence effects of THBru in D-gal-treated cardiomyocytes. On the contrary, overexpression of PHB2 promoted mitophagy and retarded cardiomyocyte senescence, as THBru did. In conclusion, this study identifies THBru as a potent antiaging medicine that induces PHB2-mediated mitophagy and suggests its clinical application prospects.

Kanglexin delays heart aging by promoting mitophagy.

Heart aging is characterized by structural and diastolic dysfunction of the heart. However, there is still no effective drug to prevent and treat the abnormal changes in cardiac function caused by aging. Here, we present the preventive effects of emodin and its derivative Kanglexin (KLX) against heart aging. We found that the diastolic dysfunction and cardiac remodeling in mice with D-galactose (D-gal)-induced aging were markedly mitigated by KLX and emodin. In addition, the senescence of neonatal mouse cardiomyocytes induced by D-gal was also reversed by KLX and emodin treatment. However, KLX exhibited better anti-heart aging effects than emodin at the same dose. Dysregulated mitophagy was observed in aging hearts and in senescent neonatal mouse cardiomyocytes, and KLX produced a greater increase in mitophagy than emodin. The mitophagy-promoting effects of KLX and emodin were ascribed to their abilities to enhance the protein stability of Parkin, a key modulator in mitophagy, with different potencies. Molecular docking and SPR analysis demonstrated that KLX has a higher affinity for the ubiquitin-like (UBL) domain of Parkin than emodin. The UBL domain might contribute to the stabilizing effects of KLX on Parkin. In conclusion, this study identifies KLX and emodin as effective anti-heart aging drugs that activate Parkin-mediated mitophagy and outlines their putative therapeutic importance.

Fabrication of Ge2Sb2Te5 crystal micro/nanostructures through single-shot Gaussian-shape femtosecond laser pulse irradiation.

Femtosecond (fs) laser-thin film interaction is one of the most practical methods for fabricating functional nanostructures. However, the details of the interaction mechanism remain unclear. In this study, we demonstrate an abnormal ablation effect on nanofilms by using a tightly focused single fs laser pulse. After the irradiation of a single Gaussian-shaped femtosecond laser pulse, a molten micro/nanopatch at the irradiated central high-power zone is isolated from the surrounding film. The confined localized threshold effect is proposed as the main mechanism for the phase isolation. With this effect, the high refractive index dielectric Ge2Sb2Te5 crystal nanostructures can be fabricated by directed dewetting of the isolated molten micro/nanopatch on Si substrates. After the laser irradiation, the central isolated liquid through an amorphous GST film is transformed into a crystalline state after resolidification. The isolated central micro/nanopatch size can be controlled by the focused spot size and pulse energy, so that the morphologies (size, geometrical morphology, and distribution) of GST nanostructures can be flexibly modulated. Furthermore, separated solid and liquid phase states detected using spatial-temporal-resolved microscopy validates the crucial role of the confined-localized threshold effect in the dewetting effect based on the separated liquid phase.

Controllable formation of laser-induced periodic surface structures on ZnO film by temporally shaped femtosecond laser scanning.

We achieved the controllable formation of laser-induced periodic surface structures (LIPSSs) on ZnO films deposited on fused silica induced by modulated temporally shaped femtosecond (fs) laser pulses (800 nm, 50 fs, 1 kHz) through the laser scanning technique. Two-dimensional (2D) high spatial frequency LIPSSs (HSFLs) with a period from 100 to 200 nm could be flexibly modulated based on the preprocessed nanostructures with appropriate fs laser irradiation conditions (fluence, scanning speed, and pulse delay). The finite-difference time-domain (FDTD) method combined with the Drude model was employed to calculate the redistributions of electric fields, which suggested the origin of HSFL formation.

Design, synthesis and biological evaluation of 2-indolinone derivatives as PAK1 inhibitors in MDA-MB-231 cells.

P21-activated kinase 1 (PAK1) plays a vital role in the proliferation, survival and migration of cancer cells, which has emerged as a promising drug target for cancer therapy. In this study, a series of 2-indolinone derivatives were designed and synthesized through a structure-based strategy. A potent PAK1 inhibitor (ZMF-005) was discovered, which presented an IC50 value of 0.22 µM against PAK1 with potent antiproliferative activity. Furthermore, we predicted the binding mode of ZMF-005 and PAK1 by molecule docking and dynamic (MD) simulation. In addition, ZMF-005 was documented to induce significant apoptosis and suppress migration in MDA-MB-231 cells. Collectively, these findings revealed that ZMF-005 is a novel potent PAK1 inhibitor for breast cancer treatment.

Manipulation of LIPSS orientation on silicon surfaces using orthogonally polarized femtosecond laser double-pulse trains.

Laser-induced periodic surface structures (LIPSS) provide an easy and cost-effective means of fabricating gratings and have been widely studied in recent decades. To overcome the challenge of orientation controllability, we developed a feasible and efficient method for manipulating the orientation of LIPSS in real time. Specifically, we used orthogonally polarized and equal-energy femtosecond laser (50 fs, 800 nm) double-pulse trains with time delay about 1ps, total peak laser fluence about 1.0 J/cm2, laser repetition frequency at 100 Hz and scanning speed at 150 µm/s to manipulate the LIPSS orientation on silicon surfaces perpendicular to the scanning direction, regardless of the scanning paths. The underlying mechanism is attributed to the periodic energy deposition along the direction of surface plasmon polaritons (SPPs), which can be controlled oriented along the scanning direction in orthogonally polarized femtosecond laser double-pulse trains surface scan processing. An application of structural colors presents the functionality of our method.

Preparative separation of four isomers of synthetic anisodamine by HPLC and diastereomer crystallization.

Anisodamine (654-1), a well-known cholinergic antagonist, is marketed as synthetic anisodamine (mixture of four isomers, 654-2) in China. To preparative resolution and comparison of the bioactivities of the four isomers of synthetic anisodamine, current work explores an economic and effective separation method by using preparative high performance liquid chromatography (HPLC) and diastereomer crystallization. Their absolute configurations were established by single-crystal X-ray diffraction and circular dichroism method. The purities of each isomer were more than 95%. Among them, 654-2-A2 (6R, 2'S configuration) exhibited better effect on cabachol preconditioned small intestine tension more than 654-2 and other isomers. The direct separation method without using HPLC was tried as well, which was still on progress. This is the first report of the method for preparative separation of four isomers of synthetic anisodamine which could be used for large-scale production in industry.

Femtosecond laser induced concentric semi-circular periodic surface structures on silicon based on the quasi-plasmonic annular nanostructure.

In this study, we report polarization-dependent concentric circular periodic surface structures on Si induced by a single shot femtosecond (fs) laser pulse based on pre-processed quasi-plasmonic annular-shaped nanostructure. An abnormal annular-shaped energy deposition of the fundamental fs laser pulse can be found by using dual-wavelength superposition of the fundamental frequency (ω) and the second-harmonic frequency (2ω) of an fs Ti:sapphire laser, which is confirmed by real beam shape detection. Based on the annular-shaped energy distribution of dual-wavelength fs laser, a concentric quasi-plasmonic corral nanostructure can be imprinted on the Au thin film. Surface plasmon polaritons (SPPs) excitations on the planar metallic nanostructures enable the manipulation of light on subwavelength scales. Thus, the pre-processed concentric quasi-plasmonic corral nanostructure can act as a precursor for the subsequent SPPs excitation and propagation by the fs laser irradiation. Using this technique, polarization-dependent semi-circular periodic surface structures on silicon can be found by the irradiation of fs laser pulse with only one shot. This research provides an additional freedom for the laser induced periodic surface structure (LIPSS) modulation based on the modulation of SPPs excitation and propagation, which plays an important role in the formation of LIPSS.

Structural changes and electrical properties of nanowelded multiwalled carbon nanotube junctions.

This study proposes an efficient approach that uses a 1064 nm continuous fiber laser to achieve nanoscale welding of crossed multiwalled carbon nanotubes (MWCNTs). We investigate the effects of laser irradiation time (from 1 to 6 s) on the structure changes and the welding quality of crossed MWCNTs using a scanning electron microscope, transmission electron microscope, and Raman spectroscopy. The experimental results demonstrate that (1) after 2 or 3 s laser irradiation, moderate temperature of MWCNTs can be formed and can cause a higher degree of graphitization and (2) the degree of graphitization and effective contact of nanowelded MWCNT junctions strongly affects its electrical properties.

Colivelin ameliorates amyloid ß peptide-induced impairments in spatial memory, synaptic plasticity, and calcium homeostasis in rats.

Amyloid ß peptide (Aß) has been thought to be neurotoxic and responsible for the impairment of learning and memory in Alzheimer's disease (AD). Humanin (HN), a 24 amino acid polypeptide first identified from the unaffected occipital lobe of an AD patient, is believed to be neuroprotective against the AD-related neurotoxicity. In this study, we investigated the neuroprotective effects of Colivelin (CLN), a novel HN derivative, against Aß by using behavioral test, in vivo electrophysiological recording, and intracellular calcium imaging. Our results showed that intrahippocampal injection of CLN (0.2 nmol) effectively prevented Aß25-35 (4 nmol)-induced deficits in spatial learning and memory of rats in Morris water maze test; the suppression of in vivo hippocampal long term potentiation (LTP) by Aß25-35 was nearly completely prevented by CLN; in addition, CLN pretreatment also effectively inhibited Aß25-35-induced calcium overload in primary cultured hippocampal neurons. These results indicate that CLN has significant neuroprotective properties against Aß, and CLN may holds great promise for the treatment and prevention of AD.

The neuroprotection of Rattin against amyloid ß peptide in spatial memory and synaptic plasticity of rats.

Rattin, a specific derivative of humanin in rats, shares the ability with HN to protect neurons against amyloid ß (Aß) peptide-induced cellular toxicity. However, it is still unclear whether Rattin can protect against Aß-induced deficits in cognition and synaptic plasticity in rats. In the present study, we observed the effects of Rattin and Aß31-35 on the spatial reference memory and in vivo hippocampal Long-term potentiation of rats by using Morris water maze test and hippocampal field potential recording. Furthermore, the probable molecular mechanism underlying the neuroprotective roles of Rattin was investigated. We showed that intra-hippocampal injection of Rattin effectively prevented the Aß31-35-induced spatial memory deficits and hippocampal LTP suppression in rats; the Aß31-35-induced activation of Caspase-3 and inhibition of STAT3 in the hippocampus were also prevented by Rattin treatment. These findings indicate that Rattin treatment can protect spatial memory and synaptic plasticity of rats against Aß31-35-induced impairments, and the underlying protective mechanism of Rattin may be involved in STAT3 and Caspases-3 pathways. Therefore, application of Rattin or activation of its signaling pathways in the brain might be beneficial to the prevention of Aß-related cognitive deficits.

Anisotropy modulations of femtosecond laser pulse induced periodic surface structures on silicon by adjusting double pulse delay.

We demonstrate that the polarization-dependent anisotropy of the laser-induced periodic surface structure (LIPSS) on silicon can be adjusted by designing a femtosecond laser pulse train (800 nm, 50 fs, 1 kHz). By varying the pulse delay from 100 to 1600 fs within a double pulse train to reduce the deposited pulse energy, which weakens the directional surface plasmon polarition (SPP)-laser energy coupling based on the initial formed ripple structure, the polarization-dependent geometrical morphology of the LIPSS evolves from a nearly isotropic circular shape to a somewhat elongated elliptical shape. Meanwhile, the controllable anisotropy of the two-dimensional scanned-line widths with different directions is achieved based on a certain pulse delay combined with the scanning speed. This can effectively realize better control over large-area uniform LIPSS formation. As an example, we further show that the large-area LIPSS can be formed with different scanning times under different pulse delays.

Crystal orientation dependence of femtosecond laser-induced periodic surface structure on (100) silicon.

It is widely believed that laser-induced periodic surface structures (LIPSS) are independent of material crystal structures. This Letter reports an abnormal phenomenon of strong dependence of the anisotropic formation of periodic ripples on crystal orientation, when Si (100) is processed by a linearly polarized femtosecond laser (800 nm, 50 fs, 1 kHz). LIPSS formation sensitivity with a π/2 modulation is found along different crystal orientations with a quasi-cosinusoid function when the angle between the crystal orientation and polarization direction is changed from 0° to 180°. Our experiments indicate that it is much easier (or more difficult) to form ripple structures when the polarization direction is aligned with the lattice axis [011]/[011¯] (or [001]). The modulated nonlinear ionization rate along different crystal orientations, which arises from the direction dependence of the effective mass of the electron is proposed to interpret the unexpected anisotropic LIPSS formation phenomenon. Also, we demonstrate that the abnormal phenomenon can be applied to control the continuity of scanned ripple lines along different crystal orientations.

Polarization-dependent elliptical crater morphologies formed on a silicon surface by single-shot femtosecond laser ablation.

Formation of the elliptical-shaped craters on a silicon surface is investigated comprehensively using a single shot of a femtosecond laser. It is observed that the ablation craters are elongated along the major axis of the polarization direction, while their orientation is parallel to the polarization direction. The ablation area grows and the morphology of the craters evolves from an ellipse to nearly a circle with increasing fluence. The underlying physical mechanism is revealed through numerical simulations that are based on the finite-difference time-domain technique. It is suggested that the initially formed craters or surface defects lead to the redistribution of the electric field on the silicon surface, which plays a crucial role in the creation of the elliptical-shaped craters. In addition, the field intensity becomes enhanced along the incident laser polarization direction, which determines the elliptical crater orientations.

[Determination of 15 preservative allergens in cosmetics by gas chromatography-tandem mass spectrometry].

Most preservatives are irritating and can easily induce skin sensitivities. Therefore, both domestic and international regulations impose clear restrictions on the use of preservatives in cosmetics. Herein, gas chromatography-tandem mass spectrometry (GC-MS/MS) was employed to simultaneously analyze the levels of 15 preservative allergens in cosmetics. Further, a precise identification approach based on a two-column retention index and mass spectrometry matching degree was developed. Cosmetic samples were extracted via acetonitrile vortex ultrasound extraction and then dehydrated with anhydrous MgSO4. The preservative allergens were separated on two columns, namely, DB-5MS and DB-WAX. Targets were identified using electron impact ionization (EI) source and the multiple reaction monitoring (MRM) mode and characterized using a retention index calibrated by a series of n-alkane standards. Following two tests, the LODs for the 15 preservative allergens on the DB-5MS column were in the range of 0.02-0.2 mg/kg, while those for 12 preservative allergens on the DB-WAX column were in the range of 0.01-20 mg/kg. The preservative allergens on the DB-5MS and DB-WAX columns demonstrated strong correlations, with all correlation coefficients exceeding 0.99. The recoveries for the 15 preservative allergens were in the range of 70.1%-129.8% at low, medium, and high levels, and the relative standard deviations (RSDs) were all below 15% (n=6) when using water, lotion, facial mask, and cream as the representative matrix. Next, 80 batches of genuine samples were tested using the established method. Isopropyl 4-hydroxybenzoate, a prohibited preservative, was detected in two sample batches using the DB-5MS and DB-WAX columns. Additionally, 11 and 10 restricted preservative allergens were identified on the DB-5MS and DB-WAX columns, respectively. The test results indicate that the double-column system approach offers excellent accuracy, effectively preventing false-positive and false-negative results, and can detect the 15 preservative allergens in cosmetics. The use of the retention index for the qualitative detection of these preservative allergens offers valuable options for non-targeted screening and meeting regulatory criteria.

The study on synthesis and vitro hypolipidemic activity of novel berberine derivatives nitric oxide donors.

Berberine was used as the lead compound in the present study to design and synthesize novel berberine derivatives by splicing bromine bridges of different berberine carbon chain lengths coupled nitric oxide donors, and their lipid lowering activities were assessed in a variety of ways. This experiment synthesized 17 new berberine nitric oxide donor derivatives. Compared with berberine hydrochloride, most of the compounds exhibited certain glycerate inhibitory activity, and compounds 6a, 6b, 6d, 12b and 12d showed higher inhibitory activity than berberine, with 6a, 6b and 6d having significant inhibitory activity. In addition, compound 6a linked to furazolidone nitric oxide donor showed better NO release in experiments; In further mechanistic studies, we screened and got two proteins, PCSK9 and ACLY, and docked two proteins with 17 compounds, and found that most of the compounds bound better with ATP citrate lyase (ACLY), among which there may be a strong interaction between compound 6a and ACLY, and the interaction force was better than the target drug Bempedoic Acid, which meaning that 6a may exert hypolipidemic effects by inhibiting ACLY; moreover, we also found that 6a may had the better performance in gastrointestinal absorption, blood-brain barrier permeability, Egan, Muegge class drug principle model calculation and bioavailability.

Controllable Fabrication of Hydrophilic Surface Micro/Nanostructures of CFRP by Femtosecond Laser.

Carbon fiber reinforced polymer (CFRP), a highly engineered lightweight material with superior properties, is widely used in industrial fields, such as aerospace, automobile, and railway transportation, as well as medical implants and supercapacitor. This work presents an effective surface treatment method for the controllable fabrication of hydrophilic surface micro/nanostructures of CFRP through femtosecond laser processing. Selective removal of the epoxy resin and leaving the carbon fibers exposed are achieved when CFRP is weakly ablated by a femtosecond laser. The diameters and structures of the carbon fibers can be controlled by adjusting the laser processing parameters. Three-dimensional surface micro/nanostructures are processed when CFRP is strongly ablated by a femtosecond laser. Meanwhile, the transformation of the sp2 orbitals to sp3 orbitals of graphitic carbons of carbon fibers is induced by a femtosecond laser. Moreover, the investigation of surface roughness and wettability of femtosecond laser-processed CFRP indicates increased roughness and excellent hydrophilicity (a contact angle of 28.1°). This work reveals the effect of femtosecond laser processing on the regulation of the physicochemical properties of CFRP, which can be applicable to surface treatment and performance control of other fiber-resin composites. The excellent hydrophilicity will be conducive to the combination of CFRP with other materials or to reducing the friction resistance of CFRP used in medical implants.