Aqueous Chemical Solution Deposition of Functional Double Perovskite Epitaxial Thin Films.

Double perovskite structure (A2 BB'O6 ) oxides exhibit a breadth of multifunctional properties with a huge potential range of applications in fields as diverse as spintronics, magneto-optic devices, or catalysis, and most of these applications require the use of thin films and heterostructures. Chemical solution deposition techniques are appearing as a very promising methodology to achieve epitaxial oxide thin films combining high performance with high throughput and low cost. In addition, the physical properties of these materials are strongly dependent on the ordered arrangement of cations in the double perovskite structure. Thus, promoting spontaneous cationic ordering has become a relevant issue. In this work, our recent achievements by using polymer-assisted deposition (PAD) of environmentally friendly, water-based solutions for the growth of epitaxial ferromagnetic insulating double perovskite La2 CoMnO6 and La2 NiMnO6 thin films on SrTiO3 and LaAlO3 single-crystal substrates are presented. It is shown that the particular crystallization and growth process conditions of PAD (very slow rate, close to thermodynamic equilibrium conditions) promote high crystallinity and quality of the films, as well as favors spontaneous B-site cationic ordering.

Heteroleptic Iron(II) Spin-Crossover Complexes Based on a 2,6-Bis(pyrazol-1-yl)pyridine-type Ligand Functionalized with a Carboxylic Acid.

Two new heteroleptic complexes [Fe(1bppCOOH)(3bpp-bph)](ClO4)2·solv (1·solv, solv = various solvents; 1bppCOOH = 2,6-bis(1H-pyrazol-1-yl)isonicotinic acid; 3bpp-bph = 2,6-bis(5-([1,1'-biphenyl]-4-yl)-1H-pyrazol-3-yl)pyridine) and [Fe(1bppCOOH)(1bppCOOEt)](ClO4)2·0.5Me2CO (2·0.5Me2CO, 1bppCOOEt = ethyl 2,6-bis(1H-pyrazol-1-yl)isonicotinate) were designed and prepared. The heteroleptic compound 1·solv was obtained by the combination of stoichiometric amounts of Fe(ClO4)2, 1bppCOOH, and 3bpp-bph, and it was designed to fine-tune the spin crossover (SCO) properties with respect to the previously reported homoleptic compound [Fe(1bppCOOH)2](ClO4)2. Indeed, the introduction of a new substituted 3bpp ligand induces a weaker ligand field in addition to promoting the formation of π···π and C-H···π intermolecular interactions through the biphenyl groups. For the desolvated counterpart 1, this results in a shift of the SCO curve toward room temperature and the observation of a 13 K hysteresis width. Besides, compound 2·0.5Me2CO, which represents the first example of a heteroleptic complex containing two 1bpp tridentate ligands, stabilizes the LS state at room temperature confirming the same trend observed for the corresponding homoleptic compounds. Interestingly, both 1 and 2·0.5Me2CO heteroleptic complexes exhibit photoswitchable properties when irradiating with a 523 nm laser at 10 K. Preliminary characterization of the deposited complexes on native SiO2 by X-ray absorption measurements suggests oxidation and decomposition of the complexes.

Design and performance of BOREAS, the beamline for resonant X-ray absorption and scattering experiments at the ALBA synchrotron light source.

The optical design of the BOREAS beamline operating at the ALBA synchrotron radiation facility is described. BOREAS is dedicated to resonant X-ray absorption and scattering experiments using soft X-rays, in an unusually extended photon energy range from 80 to above 4000 eV, and with full polarization control. Its optical scheme includes a fixed-included-angle, variable-line-spacing grating monochromator and a pair of refocusing mirrors, equipped with benders, in a Kirkpatrick-Baez arrangement. It is equipped with two end-stations, one for X-ray magnetic circular dichroism and the other for resonant magnetic scattering. The commissioning results show that the expected beamline performance is achieved both in terms of energy resolution and of photon flux at the sample position.

Structural properties and singular phase transitions of metallic Pr0.50Sr0.50CoO3 cobaltite.

The Pr0.50Sr0.50CoO3 perovskite exhibits unique magnetostructural properties among the rest of the ferromagnetic/metallic Ln0.50Sr0.50CoO3 compounds. Existing reports are largely controversial. We have determined and described its structural evolution, which follows the Pm3̅m → R3̅c → Imma → I4/mcm transformations. The structural changes have been thoroughly described. The results are confronted with distinct nonconventional properties and spin-lattice coupling effects in another half-doped cobaltite based on praseodymium, Pr0.50Ca0.50CoO3. The Imma → I4/mcm symmetry change is responsible for the unexpected second magnetic transition.

Stability of the cationic oxidation states in Pr(0.50)Sr(0.50)CoO3 across the magnetostructural transition by X-ray absorption spectroscopy.

The possible hybridization between Pr 4f and O 2p states in Pr(0.50)Sr(0.50)CoO3 at low temperatures was investigated by different techniques. First, using neutron diffraction we observed a strong contraction of some Pr-O bonds across the magnetostructural transition at T(S) ∼ 120 K. In contrast to the Pr-O bond contraction in Pr(0.50)Sr(0.50)CoO3, this transition is not accompanied by the appearance of Pr(4+) at low temperatures, as revealed by X-ray absorption spectroscopy at Pr edges. Despite the fact that a Pr valence change is not the mechanism that drives this transition, we point out an active participation of Pr ions across T(S). Moreover, Co L(2,3)-edge and O K edge X-ray absorption spectra did not reveal any spin-state variation and showed the stability of the average formal valence of cobalt ions. The large density of empty t(2g) symmetry states in the studied thermal range does not suggest the occurrence of Co(3+) in a pure low-spin state. The overall metallic behavior agrees with our findings. We propose a mixture of Co(3+) ions in the intermediate-spin or high-spin configuration together with Co(4+) ions in a low- or intermediate-spin state.

Wireless magneto-ionics: voltage control of magnetism by bipolar electrochemistry.

Modulation of magnetic properties through voltage-driven ion motion and redox processes, i.e., magneto-ionics, is a unique approach to control magnetism with electric field for low-power memory and spintronic applications. So far, magneto-ionics has been achieved through direct electrical connections to the actuated material. Here we evidence that an alternative way to reach such control exists in a wireless manner. Induced polarization in the conducting material immersed in the electrolyte, without direct wire contact, promotes wireless bipolar electrochemistry, an alternative pathway to achieve voltage-driven control of magnetism based on the same electrochemical processes involved in direct-contact magneto-ionics. A significant tunability of magnetization is accomplished for cobalt nitride thin films, including transitions between paramagnetic and ferromagnetic states. Such effects can be either volatile or non-volatile depending on the electrochemical cell configuration. These results represent a fundamental breakthrough that may inspire future device designs for applications in bioelectronics, catalysis, neuromorphic computing, or wireless communications.

Frequency-dependent stimulated and post-stimulated voltage control of magnetism in transition metal nitrides: towards brain-inspired magneto-ionics.

Magneto-ionics, which deals with the change of magnetic properties through voltage-driven ion migration, is expected to be one of the emerging technologies to develop energy-efficient spintronics. While a precise modulation of magnetism is achieved when voltage is applied, much more uncontrolled is the spontaneous evolution of magneto-ionic systems upon removing the electric stimuli (i.e., post-stimulated behavior). Here, we demonstrate a voltage-controllable N ion accumulation effect at the outer surface of CoN films adjacent to a liquid electrolyte, which allows for the control of magneto-ionic properties both during and after voltage pulse actuation (i.e., stimulated and post-stimulated behavior, respectively). This effect, which takes place when the CoN film thickness is below 50 nm and the voltage pulse frequency is at least 100 Hz, is based on the trade-off between generation (voltage ON) and partial depletion (voltage OFF) of ferromagnetism in CoN by magneto-ionics. This novel effect may open opportunities for new neuromorphic computing functions, such as post-stimulated neural learning under deep sleep.

Design and Processing as Ultrathin Films of a Sublimable Iron(II) Spin Crossover Material Exhibiting Efficient and Fast Light-Induced Spin Transition.

Materials based on spin crossover (SCO) molecules have centered the attention in molecular magnetism for more than 40 years as they provide unique examples of multifunctional and stimuli-responsive materials, which can be then integrated into electronic devices to exploit their molecular bistability. This process often requires the preparation of thermally stable SCO molecules that can sublime and remain intact in contact with surfaces. However, the number of robust sublimable SCO molecules is still very scarce. Here, we report a novel example of this kind. It is based on a neutral iron(II) coordination complex formulated as [Fe(neoim)2], where neoimH is the ionogenic ligand 2-(1H-imidazol-2-yl)-9-methyl-1,10-phenanthroline. In the first part, a comprehensive study, which covers the synthesis and magnetostructural characterization of the [Fe(neoim)2] complex as a bulk microcrystalline material, is reported. Then, in the second part, we investigate the suitability of this material to form thin films through high-vacuum sublimation. Finally, the retainment of all present SCO capabilities in the bulk when the material is processed is thoroughly studied by means of X-ray absorption spectroscopy. In particular, a very efficient and fast light-induced spin transition (LIESST effect) has been observed, even for ultrathin films of 15 nm.

Structural distortion, charge modulation and local anisotropies in magnetite below the Verwey transition using resonant X-ray scattering.

The pattern of charge modulations and local anisotropies below the Verwey transition has been determined and quantified in high-quality Fe(3)O(4) single crystals and thin films grown on MgO by using resonant X-ray scattering at the Fe K-edge. The energy, polarization and azimuthal angle dependencies of an extensive set of reflections with potential sensitivity to charge or local anisotropy orderings have been analyzed to explore their origins. A charge disproportion on octahedral B sites of 0.20 ± 0.05 e(-) with [0 0 1] and [1 1 0] cubic periodicities has been confirmed, while no significant charge disproportion has been obtained with [0 0 1/2] cubic periodicity. Additional charge modulations in the monoclinic a-b plane are also present. In addition, the occurrence of new forbidden (1, 1, 0) and (0, 0, 2n + 1/2) cubic reflections that arise from the anisotropy of the local structure around different tetrahedral and octahedral Fe atoms is shown. This complex pattern of weak charge modulations and local anisotropies is fully compatible with the low-temperature crystal structure refined in the non-polar C2/c space group and disproves any bimodal charge disproportion of the octahedral Fe atoms.

Incommensurate sinusoidal oxygen modulations in layered manganites La(1-x)Sr(1+x)MnO4 (x≥0.5).

We have studied the incommensurate-ordered phase in overdoped La0.4Sr1.6MnO4 by resonant x-ray diffraction at the Mn K edge. Weak resonant superlattice (h±0.2 h±0.2 0) and (h±0.4 h±0.4 0) reflections of the tetragonal structure were found below ~240 K. The energy, azimuth angle, and polarization dependencies of the resonant scattering have revealed sinusoidal modulations of the oxygen motions that are transverse and longitudinal to the tetragonal [110] direction. This result discards (Mn(3+),Mn(4+))-like stripe-type order but point to a charge-density-modulation picture.

X-ray Absorption Spectroscopy Study of Thickness Effects on the Structural and Magnetic Properties of Pr2-δNi1-xMn1+xO6-y Double Perovskite Thin Films.

In this work, we report a systematic study of the influence of film thickness on the structural and magnetic properties of epitaxial thin films of Pr2-δNi1-xMn1+xO6-y (PNMO) double perovskite grown on top of two different (001)-SrTiO3 and (001)-LaAlO3 substrates by RF magnetron sputtering. A strong dependence of the structural and magnetic properties on the film thickness is found. The ferromagnetic transition temperature (TC) and saturation magnetization (Ms) are found to decrease when reducing the film thickness. In our case, the thinnest films show a loss of ferromagnetism at the film-substrate interface. In addition, the electronic structure of some characteristic PNMO samples is deeply analyzed using X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD) measurements and compared with theoretical simulations. Our results show that the oxidation states of Ni and Mn ions are stabilized as Ni2+ and Mn4+, thus the ferromagnetism is mainly due to Ni2+-O-Mn4+ superexchange interactions, even in samples with poor ferromagnetic properties. XMCD results also make evident large variations on the spin and orbital contributions to the magnetic moment as the film's thickness decreases.

Electrical Sensing of the Thermal and Light-Induced Spin Transition in Robust Contactless Spin-Crossover/Graphene Hybrid Devices.

Hybrid devices based on spin-crossover (SCO)/2D heterostructures grant a highly sensitive platform to detect the spin transition in the molecular SCO component and tune the properties of the 2D material. However, the fragility of the SCO materials upon thermal treatment, light irradiation, or contact with surfaces and the methodologies used for their processing have limited their applicability. Here, an easily processable and robust SCO/2D hybrid device with outstanding performance based on the sublimable SCO [Fe(Pyrz)2 ] molecule deposited over chemical vapor deposition (CVD) graphene is reported, which is fully compatible with electronics industry protocols. Thus, a novel methodology based on growing an elusive polymorph of [Fe(Pyrz)2 ] (tetragonal phase) over graphene is developed that allows a fast and effective light-induced spin transition in the devices (≈50% yield in 5 min) to be detected electrically. Such performance can be enhanced even more when a flexible polymeric layer of poly(methyl methacrylate) is inserted in between the two active components in a contactless configuration, reaching a ≈100% yield in 5 min.

Direct Epitaxial Growth of Polar Hf0.5Zr0.5O2 Films on Corundum.

Single-phase epitaxial Hf0.5Zr0.5O2 films with non-centrosymmetric orthorhombic structure have been grown directly on electrode-free corundum (α-Al2O3) substrates by pulsed laser deposition. A combination of high-resolution X-ray diffraction and X-ray absorption spectroscopy confirms the epitaxial growth of high-quality films belonging to the Pca21 space group, with [111] out-of-plane orientation. The surface of a 7-nm-thick sample exhibits an atomic step-terrace structure with a corrugation of the order of one atomic layer, as proved by atomic force microscopy. Scanning transmission electron microscopy reveals that it consists of grains with around 10 nm lateral size. The polar nature of this film has been corroborated by pyroelectric measurements. These results shed light on the mechanisms of the epitaxial stabilization of the ferroelectric phase of hafnia.

Dynamic electric-field-induced magnetic effects in cobalt oxide thin films: towards magneto-ionic synapses.

Voltage control of magnetism via electric-field-driven ion migration (magneto-ionics) has generated intense interest due to its potential to greatly reduce heat dissipation in a wide range of information technology devices, such as magnetic memories, spintronic systems or artificial neural networks. Among other effects, oxygen ion migration in transition-metal-oxide thin films can lead to the generation or full suppression of controlled amounts of ferromagnetism ('ON-OFF' magnetic transitions) in a non-volatile and fully reversible manner. However, oxygen magneto-ionic rates at room temperature are generally considered too slow for industrial applications. Here, we demonstrate that sub-second ON-OFF transitions in electrolyte-gated paramagnetic cobalt oxide films can be achieved by drastically reducing the film thickness from >200 nm down to 5 nm. Remarkably, cumulative magneto-ionic effects can be generated by applying voltage pulses at frequencies as high as 100 Hz. Neuromorphic-like dynamic effects occur at these frequencies, including potentiation (cumulative magnetization increase), depression (i.e., partial recovery of magnetization with time), threshold activation, and spike time-dependent magnetic plasticity (learning and forgetting capabilities), mimicking many of the biological synapse functions. The systems under investigation show features that could be useful for the design of artificial neural networks whose magnetic properties would be governed with voltage.

Unveiling the Impact of the Cations and Anions in Ionic Liquid/Glyme Hybrid Electrolytes for Na-O2 Batteries.

A series of hybrid electrolytes composed of diglyme and ionic liquids (ILs) have been investigated for Na-O2 batteries, as a strategy to control the growth and purity of the discharge products during battery operation. The dependence of chemical composition of the ILs on the size, purity, and distribution of the discharge products has been evaluated using a wide range of experimental and spectroscopic techniques. The morphology and composition of the discharge products found in the Na-O2 cells have a complex dependence on the physicochemical properties of the electrolyte as well as the speciation of the Na+ and superoxide radical anion. All of these factors control the nucleation and growth phenomena as well as electrolyte stability. Smaller discharge particle sizes and largely homogeneous (2.7 ± 0.5 µm) sodium superoxide (NaO2) crystals with only 9% of side products were found in the hybrid electrolyte containing the pyrrolidinium IL with a linear alkyl chain. The long-term cyclability of Na-O2 batteries with high Coulombic efficiency (>90%) was obtained for this electrolyte with fewer side products (20 cycles at 0.5 mA h cm-2). In contrast, rapid failure was observed with the use of the phosphonium-based electrolyte, which strongly stabilizes the superoxide anion. A high discharge capacity (4.46 mA h cm-2) was obtained for the hybrid electrolyte containing the pyrrolidinium-based IL bearing a linear alkyl chain with a slightly lower value (3.11 mA h cm-2) being obtained when the hybrid electrolyte contained similar pyrrolidinium-based IL bearing an alkoxy chain.

Top-Layer Engineering Reshapes Charge Transfer at Polar Oxide Interfaces.

Charge-transfer phenomena at heterointerfaces are a promising pathway to engineer functionalities absent in bulk materials but can also lead to degraded properties in ultrathin films. Mitigating such undesired effects with an interlayer reshapes the interface architecture, restricting its operability. Therefore, developing less-invasive methods to control charge transfer will be beneficial. Here, an appropriate top-interface design allows for remote manipulation of the charge configuration of the buried interface and concurrent restoration of the ferromagnetic trait of the whole film. Double-perovskite insulating ferromagnetic La2 NiMnO6 (LNMO) thin films grown on perovskite oxide substrates are investigated as a model system. An oxygen-vacancy-assisted electronic reconstruction takes place initially at the LNMO polar interfaces. As a result, the magnetic properties of 2-5 unit cell LNMO films are affected beyond dimensionality effects. The introduction of a top electron-acceptor layer redistributes the electron excess and restores the ferromagnetic properties of the ultrathin LNMO films. Such a strategy can be extended to other interfaces and provides an advanced approach to fine-tune the electronic features of complex multilayered heterostructures.

Route to tunable room temperature electric polarization in SrTiO3-CoFe2O4 heterostructures.

Utilizing the magnetostrictive properties of CoFe2O4, we demonstrate reversible room temperature control of the Ti electronic structure in SrTiO3-CoFe2O4 heterostructures, by inducing local and reversible strain in the SrTiO3. By means of X-ray absorption spectroscopy, we have ascertained the changes that take place in the energy levels of the Ti 3d orbitals under the influence of an external magnetic field. The observed Ti electronic state when the sample is subjected to moderately large external magnetic fields and the disappearance of the induced phase upon their removal indicates lattice distortions that are suggestive of the development of a net electric polarization.

On the correlation between the X-ray absorption chemical shift and the formal valence state in mixed-valence manganites.

Here the correlation between the chemical shift in X-ray absorption spectroscopy, the geometrical structure and the formal valence state of the Mn atom in mixed-valence manganites are discussed. It is shown that this empirical correlation can be reliably used to determine the formal valence of Mn, using either X-ray absorption spectroscopy or resonant X-ray scattering techniques. The difficulties in obtaining a reliable comparison between experimental XANES spectra and theoretical simulations on an absolute energy scale are revealed. It is concluded that the contributions from the electronic occupation and the local structure to the XANES spectra cannot be separated either experimentally or theoretically. In this way the geometrical and electronic structure of the Mn atom in mixed-valence manganites cannot be described as a bimodal distribution of the formal integer Mn(3+) and Mn(4+) valence states corresponding to the undoped references.

Biodegradable Metal-Organic Framework-Based Microrobots (MOFBOTs).

Microrobots and metal-organic frameworks (MOFs) have been identified as promising carriers for drug delivery applications. While clinical applications of microrobots are limited by their low drug loading efficiencies and the poor degradability of the materials used for their fabrication, MOFs lack motility and targeted drug delivery capabilities. The combination of these two fields marks the beginning of a new era; MOF-based small-scale robots (MOFBOTs) for biomedical applications. Yet, biodegradability is a major hurdle in the field of micro- and nanoswimmers including small-scale robots. Here, a highly integrated MOFBOT that is able to realize magnetic locomotion, drug delivery, and selective degradation in cell cultures is reported for the first time. The MOF used in the investigations does not only allow a superior loading of chemotherapeutic drugs and their controlled release via a pH-responsive degradation but it also enables the controlled locomotion of enzymatically biodegradable gelatin-based helical microrobots under magnetic fields. The degradation of the integrated MOFBOT is observed after two weeks, when all its components fully degrade. Additionally, drug delivery studies performed in cancer cell cultures show reduced viability upon delivery of Doxorubicin within short time frames. This MOFBOT system opens new avenues for highly integrated fully biodegradable small-scale robots.