Human iPSC and CRISPR targeted gene knock-in strategy for studying the somatic TIE2L914F mutation in endothelial cells.

Induced pluripotent stem cell (iPSC) derived endothelial cells (iECs) have emerged as a promising tool for studying vascular biology and providing a platform for modelling various vascular diseases, including those with genetic origins. Currently, primary ECs are the main source for disease modelling in this field. However, they are difficult to edit and have a limited lifespan. To study the effects of targeted mutations on an endogenous level, we generated and characterized an iPSC derived model for venous malformations (VMs). CRISPR-Cas9 technology was used to generate a novel human iPSC line with an amino acid substitution L914F in the TIE2 receptor, known to cause VMs. This enabled us to study the differential effects of VM causative mutations in iECs in multiple in vitro models and assess their ability to form vessels in vivo. The analysis of TIE2 expression levels in TIE2L914F iECs showed a significantly lower expression of TIE2 on mRNA and protein level, which has not been observed before due to a lack of models with endogenous edited TIE2L914F and sparse patient data. Interestingly, the TIE2 pathway was still significantly upregulated and TIE2 showed high levels of phosphorylation. TIE2L914F iECs exhibited dysregulated angiogenesis markers and upregulated migration capability, while proliferation was not affected. Under shear stress TIE2L914F iECs showed reduced alignment in the flow direction and a larger cell area than TIE2WT iECs. In summary, we developed a novel TIE2L914F iPSC-derived iEC model and characterized it in multiple in vitro models. The model can be used in future work for drug screening for novel treatments for VMs.

Clinical features and outcome of retinoblastoma at the Vietnam National Cancer Hospital.

OBJECTIVES: To characterize the clinical features, treatment, and outcome of children diagnosed with retinoblastoma (RB) at Vietnam National Cancer Hospital. METHODS: The study enrolled all RB patients newly diagnosed at Vietnam National Cancer Hospital from January 2018 to December 2022. The primary endpoint was overall survival (OS) and the eye salvage rate. RESULTS: In total, 139 patients were enrolled, 51.8% patients were male. Median age was 18.9 months. Most patients presented with leukocoria (63.3%), followed by strabismus (14.4%), and 43.9% had bilateral disease. Of 200 eyes, 129 (64.5%) were classified as group E. Extraocular extension was noted in 10 of 139 patients (7.2%). About one-third of the patients lived more than 300 kilometers (km) away from these hospitals, and 17.3% of the patients belonged to minority groups, both of which were dominated by group E and extraocular or high-risk eyes at the time of consultation. Primary enucleation was done for 57 eyes (28.5%), and 51 of 61 patients (83.6%) received eye salvage therapy in bilateral RB group. At study closure, 127 children were alive at the last follow-up, 12 cases were confirmed dead. The 5-year OS and progression-free survival (PFS) rates were 90.3% and 85.9%, respectively. In particular, ethnic minority, distance to hospital more than 150 km, and extraocular disease were significantly associated with higher mortality among children with RB treated in Vietnam National Cancer Hospital. CONCLUSIONS: There is a need to support for screening RB with early symptoms in grassroots medical facilities and raise awareness among patients' families through health education programs. Besides, caring and supporting treatment for patients from the ethnic minority and who live far from hospitals are also extremely necessary.

Effective aqueous chromate treatment using triethanolamine anacardate coated magnetic nanoparticles.

Low-cost adsorbents derived from agricultural by-products incorporated magnetic nanoparticles (NPs) are promising for wastewater treatment. They are always preferred due to their great performance and easy separation. This study reports cobalt superparamagnetic (CoFe2O4) nanoparticles (NPs) incorporated with triethanolamine (TEA) based surfactants from cashew nut shell liquid, namely TEA-CoFe2O4, for the removal of chromium (VI) ions from aqueous solutions. To have detailed characteristics of the morphology and structural properties, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and vibrating sample magnetometry (VSM) were employed. The fabricated TEA-CoFe2O4 particles exhibit soft and superparamagnetic properties, which make the nanoparticles easily recycled by using a magnet. Chromate adsorption on the TEA-CoFe2O4 nanomaterials reached an optimal efficiency of 84.3% at pH = 3 with the initial adsorbent dose of 10 g/L and chromium (VI) concentration of 40 mg/L. The TEA-CoFe2O4 nanoparticles can maintain the effective adsorption of chromium (VI) ion (by 29% of efficiency loss) and retain the magnetic separation using a magnet up to three cycles of the regeneration, which promise a high potential of this low-cost adsorbent for long-term treatment of heavy metal ions from polluted waters.

Lipidated peptides derived from intracellular loops 2 and 3 of the urotensin II receptor act as biased allosteric ligands.

Over the last decade, the urotensinergic system, composed of one G protein-coupled receptor and two endogenous ligands, has garnered significant attention as a promising new target for the treatment of various cardiovascular diseases. Indeed, this system is associated with various biomarkers of cardiovascular dysfunctions and is involved in changes in cardiac contractility, fibrosis, and hypertrophy contributing, like the angiotensinergic system, to the pathogenesis and progression of heart failure. Significant investment has been made toward the development of clinically relevant UT ligands for therapeutic intervention, but with little or no success to date. This system therefore remains to be therapeutically exploited. Pepducins and other lipidated peptides have been used as both mechanistic probes and potential therapeutics; therefore, pepducins derived from the human urotensin II receptor might represent unique tools to generate signaling bias and study hUT signaling networks. Two hUT-derived pepducins, derived from the second and the third intracellular loop of the receptor (hUT-Pep2 and [Trp1, Leu2]hUT-Pep3, respectively), were synthesized and pharmacologically characterized. Our results demonstrated that hUT-Pep2 and [Trp1, Leu2]hUT-Pep3 acted as biased ago-allosteric modulators, triggered ERK1/2 phosphorylation and, to a lesser extent, IP1 production, and stimulated cell proliferation yet were devoid of contractile activity. Interestingly, both hUT-derived pepducins were able to modulate human urotensin II (hUII)- and urotensin II-related peptide (URP)-mediated contraction albeit to different extents. These new derivatives represent unique tools to reveal the intricacies of hUT signaling and also a novel avenue for the design of allosteric ligands selectively targeting hUT signaling potentially.

Transverse Anderson localization of mid-infrared light in a chalcogenide transversely disordered optical fiber.

We successfully fabricate a transversely disordered optical fiber made of AsSe2 and As2S5 glasses for high-resolution mid-infrared image transport. By using the fabricated fiber, we experimentally observe transverse Anderson localization of mid-infrared light at the wavelength of 3 µm. Moreover, we numerically evaluate the localization in the fiber by using a cross-sectional image of the fiber.

Chalcogenide all-solid hybrid microstructured optical fiber with polarization maintaining properties and its mid-infrared supercontinuum generation.

In this paper, we report a successful fabrication of a highly nonlinear chalcogenide all-solid hybrid microstructured optical fiber with polarization maintaining properties and a mid-infrared SC generation. Up to 4.5 × 10-4 at 10 µm of the fiber birefringence can be realized by employing a single As2Se3 core and two As2S5 rods horizontally aligned in the AsSe2 cladding. The fiber possesses a near-zero and flattened all-normal chromatic dispersion profile over the wavelength range from 5 to 10 µm. The polarization maintaining properties of the fiber is experimentally confirmed and a broadband supercontinuum spectrum from 2 to 10 µm in the mid-infrared window was experimentally demonstrated.

Halides and oxyhalides-based photocatalysts for abatement of organic water contaminants - An overview.

Recently, halides (silver halides, AgX; perosvkite halides, ABX3) and oxyhalides (bismuth oxyhalides, BiOX) based nanomaterials are noticeable photocatalysts in the degradation of organic water pollutants. Therefore, we review the recent reports to explore improvement strategies adopted in AgX, ABX3 and BiOX (X = Cl, Br and I)-based photocatalysts in water pollution remediation. Herein, the photocatalytic degradation performances of each type of these photocatalysts were discussed. Strategies such as tailoring the morphology, crystallographic facet exposure, surface area, band structure, and creation of surface defects to improve photocatalytic activities of pure halides and BiOCl photocatalysts are emphasized. Other strategies like metal ion and/or non-metal doping and construction of composites, adopted in these photocatalysts were also reviewed. Furthermore, the way of production of active radicals by these photocatalysts under ultraviolet/visible light source is highlighted. The deciding factors such as structure of pollutant, light sources and other parameters on the photocatalytic performances of these materials were also explored. Based on this literature survey, the need of further research on AgX, ABX3 and BiOX-based photocatalysts were suggested. This review might be beneficial for researchers who are working in halides and oxyhalides-based photocatalysis for water treatment.

Augmentation Rhinoplasty in Cleft Lip Nasal Deformity Using Alloplastic Material and Autologous Cartilage.

Secondary cleft rhinoplasty typically requires large amounts of cartilage grafts for augmentation. The purpose of this study was to present our short-term experience with alloplastic implants in cleft rhinoplasty. This was a retrospective cohort study of cleft lip and palate patients treated with secondary rhinoplasty at Hanoi Medical University Hospital and Ruby Hospital between 2017 and 2020. All rhinoplasty procedures consisted of lower lateral cartilage repositioning, a dorsal augmentation with silicone implant, columellar strut implant or graft, and onlay tip grafts. Cartilage was obtained from the septum and concha, and no cartilage was harvested from the rib. The study outcomes included the Rhinoplasty Outcome Evaluation (ROE) survey, a modified Mortier scoring scale, 8 intranasal measures of symmetry, and 4 nasofacial measures of tip projection and nasal length. Changes in patient satisfaction and nasal esthetics were compared before and after surgery. A total of 38 patients were included in the final study sample, of whom 65.79% had unilateral clefts. The overall complication rate was 7.89%, and there were 2 cases of infection and 1 case of dorsal implant displacement. Following rhinoplasty, ROE satisfaction scores significantly increased (+39.36, P <0.01) and Mortier severity scores decreased (-3.06, P <0.01). Nostril symmetry nearly normalized in width, height, and inclination. Mean columellar deviation decreased from 8.82 to 2.08 degrees, and nasal projection increased as assessed on multiple analyses. Patients with bilateral clefts had similar improvements in ROE and Mortier scores. In our experience, synthetic implants simplified the correction of cleft nasal deformity and eliminated the need for costal cartilage. We found that our protocol produced acceptable and stable short-term clinical results without increasing the complication rate above what has been reported with autologous grafts.

Policymaker perceptions of COVID-19 impacts, opportunities and challenges for sustainable wildlife farm management in Vietnam.

This paper uses Vietnam - where overexploitation of wildlife resources is a major threat to biodiversity conservation - as a case study to examine how government officials perceive the impacts of COVID-19 on wildlife farming, as well as the opportunities and challenges presented for sustainable wildlife management. Findings show Vietnamese government officials perceive COVID-19 to have had mixed impacts on wildlife conservation policies and practice. While the pandemic strengthened the legal framework on wildlife conservation, implementation and outcomes have been poor, as existing policies are unclear, contradictory, and poorly enforced. Our paper also shows policymakers in Vietnam are not in favor of banning wildlife trade. As our paper documents the immediate impacts of the pandemic on wildlife farming, more research is necessary to analyse longer-term impacts.

Maintaining chromatic dispersion and signal gain performances in a chalcogenide buffer step-index optical fiber.

Aiming at maintaining the chromatic dispersion properties and fiber optical parametric amplification (FOPA) performance when fiber core fluctuation occurs, we propose a buffer step-index optical fiber. The AsSe2 chalcogenide glass is employed as the core material due to its high nonlinearity and broad transmission spectrum. The calculated results in this study show that the chromatic dispersion variation due to the change of core diameter can be greatly suppressed and a continuous and very broad FOPA signal gain spectrum can be obtained and maintained by carefully controlling the core, buffer and cladding properties such as refractive index and diameters. The calculated results in this study showed that by using the proposed 3-cm-long fiber pumped at 5.02 µm, a broad signal gain bandwidth from 3 to 14 µm at about 15 dB is attainable although the fiber core diameter Dc drastically fluctuated from 2 to 5 µm and the buffer diameter Db varies from 8.9 to 9.3 µm. Moreover, when Dc varies in smaller range from 3 to 4 µm, the FOPA signal gain spectra calculated at different fixed values of Db in the range from 8.9 to 9.3 µm are highly maintained. When Db is kept at 9.0 µm and Dc varies from 3 to 4 µm, the calculated FOPA signal gain spectra at different pump wavelengths from 4.98 to 5.02 µm are also nearly identical in the wavelength range from 3 up to 13 µm.

Recent progress in green and biopolymer based photocatalysts for the abatement of aquatic pollutants.

Enormous research studies on the abatement of anthropogenic aquatic pollutants including organic dyes, pesticides, cosmetics, antibiotics and inorganic species by using varieties of semiconductor photocatalysts have been reported in recent decades. Besides, many of these photocatalysts suffer in real applications owing to their high production cost and low stability. In many cases, the photocatalysts themselves are being considered as secondary pollutants. To eliminate these drawbacks, the green synthesized photocatalysts and the use of biopolymers as photocatalyst supports are considered in recent years. In this context, recent developments in green synthesized metals, metal oxides, other metal compounds, and carbon based photocatalysts in water purification are critically reviewed. Furthermore, the pivotal role of biopolymers including chitin, chitosan, cellulose, natural gum, hydroxyapatite, alginate in photocatalytic removal of aquatic pollutants is comprehensively reviewed. The presence of functional groups, electron trapping ability, biocompatibility, natural occurrence, and low production cost are the major reasons for using biopolymers in photocatalysis. Finally, the summary and conclusion are presented along with existing challenges in this research area.

Simultaneous Condylar Reconstruction by Free Ramus Osteotomy Graft After Complete Condylectomy for Osteochondroma.

ABSTRACT: Mandibular condyle osteochondromas cause morphologic and functional disturbances. Multiple options exist for reconstructing the condylar segment following complete condylectomy. In this series, we describe 3 cases of mandibular condyle osteochondroma treated with complete condylectomy, orthognathic surgery, and a novel free ramus osteotomy graft. This is the first report to reconstruct the temporomandibular joint using a free ramus graft. Through this single-staged approach we were able to avoid recurrence, preserve function, and restore facial balance without a separate donor site or an alloplastic implant.

The Surgery-first Approach to Orthognathic Surgery.

ABSTRACT: The purpose of this study was to compare the outcomes between the conventional surgical approach (CSA) and the surgery-first approach (SFA) for both traditional orthognathic osteotomies (LeFort/BSSO) and anterior segmental osteotomies (ASO). This was a retrospective cohort study of patients treated at the Hanoi Plastic Surgery Center from January 2000 to December 2012. The study predictors were the type (LeFort/BSSO or ASO) and timing (CSA or SFA) of surgery. The study outcomes were total treatment time and the rates of complication and relapse. 146 patients were included in the study, of whom 99 (67.8%) were treated with traditional osteotomies and 47 (32.2%) were treated with ASO. In the traditional osteotomy group, there were no significant differences in complication (P = 0.84) or relapse (P = 0.77) rates between CSA and SFA. There were no complications or relapses in the ASO group. Total treatment time was significantly decreased when using the SFA for both orthognathic osteotomies (-3.9 months, P < 0.01) and ASO (-3.3 months, P < 0.01). Our results showed that the SFA was able to achieve similar clinical outcomes to CSA but in a shorter treatment time. The SFA was effective for not only traditional orthognathic osteotomies but also ASO.

Solution/Ammonolysis Syntheses of Unsupported and Silica-Supported Copper(I) Nitride Nanostructures from Oxidic Precursors.

Herein we describe an alternative strategy to achieve the preparation of nanoscale Cu3N. Copper(II) oxide/hydroxide nanopowder precursors were successfully fabricated by solution methods. Ammonolysis of the oxidic precursors can be achieved essentially pseudomorphically to produce either unsupported or supported nanoparticles of the nitride. Hence, Cu3N particles with diverse morphologies were synthesized from oxygen-containing precursors in two-step processes combining solvothermal and solid-gas ammonolysis stages. The single-phase hydroxochloride precursor, Cu2(OH)3Cl was prepared by solution-state synthesis from CuCl2·2H2O and urea, crystallising with the atacamite structure. Alternative precursors, CuO and Cu(OH)2, were obtained after subsequent treatment of Cu2(OH)3Cl with NaOH solution. Cu3N, in the form of micro- and nanorods, was the sole product formed from ammonolysis using either CuO or Cu(OH)2. Conversely, the ammonolysis of dicopper trihydroxide chloride resulted in two-phase mixtures of Cu3N and the monoamine, Cu(NH3)Cl under similar experimental conditions. Importantly, this pathway is applicable to afford composite materials by incorporating substrates or matrices that are resistant to ammoniation at relatively low temperatures (ca. 300 °C). We present preliminary evidence that Cu3N/SiO2 nanocomposites (up to ca. 5 wt.% Cu3N supported on SiO2) could be prepared from CuCl2·2H2O and urea starting materials following similar reaction steps. Evidence suggests that in this case Cu3N nanoparticles are confined within the porous SiO2 matrix.

Mid-infrared wavelength conversion using dispersion-engineered As2S5 microstructured optical fiber pumped with an ultrafast laser at 2 µm.

We fabricate a dispersion-engineered As2S5 microstructured optical fiber for demonstration of frequency conversion in one of the atmospheric-transparent windows in the mid-infrared domain. The experimentally obtained results show that parametric wavelength conversion at 4.5 µm is obtained using fabricated microstructured optical fiber pumped with 200 fs laser pulses of average power of 20 mW at 2 µm. Obtained detuning frequency from the pump frequency was ∼84THz. To the best of our knowledge, the mid-infrared wavelength conversion at 4.5 µm in fiber configuration has been demonstrated for the first time. The experimentally observed result matches well with numerically simulated phase-matching conditions.

A student-led curriculum framework for homeless and vulnerably housed populations.

BACKGROUND: Medical student demands for competency based homeless health education is increasing. Indeed, humans living homeless is a treatable health and social emergency. This innovation report outlines the initial development of an education framework for homeless health. METHODS: A medical student task force and educators conducted a mixed method study, including a scoping review of homeless health curriculum and competencies, a cross-country survey of medical students, and unique clinical guidelines. The task force collaborated with persons with lived experience and clinical guideline developers from the Homeless Health Research Network. The students presented at the Toronto Homeless Health Summit and refined the framework with feedback from homeless health experts. RESULTS: The main outcome was an evidence-based Homeless Health Curriculum Framework. It uses seven core competencies; with communication, advocacy, leadership, and upstream approaches playing the strongest roles. The framework integrated the new clinical guideline (housing, income assistance, case management and addiction). In addition, it identified approaches to support mental health care with trauma informed and patient centered care. It identified public health values, clinical objectives, and case studies. The framework aims to inform the design, delivery, service learning and evaluation for medical school curriculum. CONCLUSIONS: This student-led curriculum framework can support the design, implementation, delivery and evaluation of homeless health within the undergraduate medical curriculum. The framework can lay the foundation for new doctors, research and development; support consistency across programs; and support the creation of national learning and evaluation tools.

An improvement of real-time polymerase chain reaction system based on probe modification is required for accurate detection of African swine fever virus in clinical samples in Vietnam.

OBJECTIVE: The rapid and reliable detection of the African swine fever virus (ASFV) plays an important role in emergency control and preventive measures of ASF. Some methods have been recommended by FAO/OIE to detect ASFV in clinical samples, including realtime polymerase chain reaction (PCR). However, mismatches in primer and probe binding regions may cause a false-negative result. Here, a slight modification in probe sequence has been conducted to improve the qualification of real-time PCR based on World Organization for Animal Health (OIE) protocol for accurate detection of ASFV in field samples in Vietnam. METHODS: Seven positive confirmed samples (four samples have no mismatch, and three samples contained one mutation in probe binding sites) were used to establish novel real-time PCR with slightly modified probe (Y = C or T) in comparison with original probe recommended by OIE. RESULTS: Both real-time PCRs using the OIE-recommended probe and novel modified probe can detect ASFV in clinical samples without mismatch in probe binding site. A high correlation of cycle quantification (Cq) values was observed in which Cq values obtained from both probes arranged from 22 to 25, suggesting that modified probe sequence does not impede the qualification of real-time PCR to detect ASFV in clinical samples. However, the samples with one mutation in probe binding sites were ASFV negative with OIE recommended probe but positive with our modified probe (Cq value ranked between 33.12-35.78). CONCLUSION: We demonstrated for the first time that a mismatch in probe binding regions caused a false negative result by OIE recommended real-time PCR, and a slightly modified probe is required to enhance the sensitivity and obtain an ASF accurate diagnosis in field samples in Vietnam.

Mid-infrared transmission by a tellurite hollow core optical fiber.

We experimentally demonstrate for the first time a successful fabrication of a tellurite hollow core optical fiber which has a mid-infrared transmission range. The wall thickness of each cladding air-hole is about 2.8 µm and the outer diameter of the full air-hole structure D is approximately 110 µm. The results show that the measured transmission spectrum can expand up to 3.9 µm. In addition, it is expected that the transmission can extend to around 6 µm. When the input light is linearly polarized, it can be maintained after propagating through a 17-cm-long fiber.

Highly Sustainable Zinc Anodes for a Rechargeable Hybrid Aqueous Battery.

The synthesis of novel zinc electrodes has been successfully implemented by using the electroplating method with the aid of inorganic additives in the electroplating solution. The selected inorganic additives are indium sulfate, tin oxide, and boric acid. From X-ray diffraction results, these synthesized zinc electrodes prefer (002) and/or (103) crystallographic orientations, representing basal morphology and high resistance to dendrite growth. The corrosion rates of these electroplated zinc samples decrease as much as 11 times smaller than the corrosion rate on zinc foil when the zinc materials are in contact with the aqueous electrolyte of a rechargeable hybrid aqueous battery (ReHAB). The ReHABs employing these anodes exhibit up to a threefold decrease in float charge current density after a seven-day constant-voltage charging at 2.1 V versus Zn2+ /Zn. Furthermore, the capacity retention is up to 15 % higher than the performance of battery containing commercial Zn after 1000 cycles of charge-discharge. The significant advancements are attributed to the careful preparation of the anode, which contains appropriate crystallographic orientation and morphology.