Fluorination or Not in Small Molecule Solar Cells: Achieving a Higher Efficiency with Halogen-free End Group.

Fluorination is an efficient strategy for improving organic solar cells (OSCs) efficiency, particularly by fluorinating the end group of emerging nonfullerene acceptors. Here, the fluorination effect was investigated by using small molecule donors with fluorine-free (SBz) and fluorinated (SBz-F) end groups, paired with the emerging nonfullerene acceptor Y6. Interestingly and unexpectedly, fluorination of the end group negatively affects OSCs efficiency, with fluorine-free SBz:Y6 OSCs achieving a higher power conversion efficiency (PCE) of 11.05% compared to the fluorine-containing SBz-F:Y6 blends (PCE = 9.61%). Analysis of space-charge limited currents reveals lower and unbalanced hole/electron mobility in SBz-F:Y6 compared to the SBz:Y6 blends. These findings are further supported by charge recombination dynamics and donor-acceptor miscibility analyses.

Electron Transporting Polymeric Materials with Partial Quaternization for High-Performance Organic Solar Cells.

Efficient cathode interfacial layers (CILs) have become a crucial component of organic solar cells (OSCs). Charge extraction barriers, interfacial trap states, and significant transport resistance may be induced due to the unfavorable cathode interlayer, limiting the device performance. In this study, poly(4-vinylpyridine) is used as the CIL for OSCs, and a new type of CIL named P4VP-I is synthesized through the quaternization strategy. Compared to P4VP, P4VP-I CIL exhibits enhanced conductivity and optimized work function. OSCs employing the P4VP-I ETL demonstrate prolonged carrier lifetime, suppressed charge recombination, and achieve higher power conversion efficiencies (PCE) than the commonly used ETLs such as PFN-Br and Phen-NaDPO.

Solid Additive Engineering for Next-generation Organic Photovoltaics.

Solution-processed bulk heterojunction (BHJ) organic solar cells (OSCs) have emerged as a promising next-generation photovoltaic technology. In this emerging field, there is a growing trend of employing solid additives (SAs) to fine-tune the BHJ morphology and unlock the full potential of OSCs. SA engineering offers several significant benefits for commercialization, including the ability to i) control film-forming kinetics to expedite high-throughput fabrication, ii) leverage weak noncovalent interactions between SA and BHJ materials to enhance the efficiency and stability of OSCs, and iii) simplify procedures to facilitate cost-effective production and scaling-up. These features make SA engineering a key catalyst for accelerating the development of OSCs. Recent breakthroughs have shown that SA engineering can achieve an efficiency of 19.67% in single-junction OSCs, demonstrating its effectiveness in promoting the commercialization of organic photovoltaic devices. This review provides a comprehensive overview of significant breakthroughs and pivotal contributions of emerging SAs, focusing on their roles in governing film-forming dynamics, stabilizing phase separation, and addressing other crucial aspects. The rationale and design rules for SAs in highly efficient and stable OSCs are also discussed. Finally, the remaining challenges are summarized, and perspectives on future advances in SA engineering are offered.

Insights Into Preaggregation Control of Y-Series Nonfullerene Acceptors in Liquid State for Highly Efficient Binary Organic Solar Cells.

Leveraging breakthroughs in Y-series nonfullerene acceptors (NFAs), organic solar cells (OSCs) have achieved impressive power conversion efficiencies (PCEs) exceeding 19%. However, progress in advancing OSCs has decelerated due to constraints in realizing the full potential of the Y-series NFAs. Herein, a simple yet effective solid additive-induced preaggregation control method employing 2-chloro-5-iodopyridine (PDCI) is reported to unlock the full potential of the Y-series NFAs. Specifically, PDCI interacts predominantly with Y-series NFAs enabling enhanced and ordered phase-aggregation in solution. This method leads to a notable improvement and a redshifted absorption of the acceptor phase during film formation, along with improved crystallinity. Moreover, the PDCI-induced preaggregation of NFAs in the solution enables ordered molecule packing during the film-formation process through delicate intermediate states transition. Consequently, the PDCI-induced preaggregated significantly improves the PCE of PM6:Y6 OSCs from 16.12% to 18.12%, among the best values reported for PM6:Y6 OSCs. Importantly, this approach is universally applicable to other Y-series NFA-based OSCs, achieving a champion PCE of 19.02% for the PM6:BTP-eC9 system. Thus, the preaggregation control strategy further unlocks the potential of Y-series NFAs, offering a promising avenue for enhancing the photovoltaic performance of Y-series NFA-based OSCs.

Balancing the Efficiency and Synthetic Accessibility of Organic Solar Cells with Isomeric Acceptor Engineering.

With the continuous development of organic semiconductor materials and on-going improvement of device technology, the power conversion efficiencies (PCEs) of organic solar cells (OSCs) have surpassed the threshold of 19%. Now, the low production cost of organic photovoltaic materials and devices have become an imperative demand for its practical application and future commercialization. Herein, the feasibility of simplified synthesis for cost-effective small-molecule acceptors via end-cap isomeric engineering is demonstrated, and two constitutional isomers, BTP-m-4Cl and BTP-o-4Cl, are synthesized and compared in parallel. These two non-fullerene acceptors (NFAs) have very similar optoelectronic properties but nonuniform morphological and crystallographic characteristics. Consequently, the OSCs composed of PM6:BTP-m-4Cl realize PCE of 17.2%, higher than that of the OSCs with PM6:BTP-o-4Cl (≈16%). When ternary OSCs are fabricated with PM6:BTP-m-4Cl:BTP-o-4Cl, the averaged PCE value reaches 17.95%, presenting outstanding photovoltaic performance. Most excitingly, the figure of merit (FOM) values of PM6:BTP-m-4Cl, PM6:BTP-o-4Cl, and PM6:BTP-m-4Cl:BTP-o-4Cl based devices are 0.190, 0.178, and 0.202 respectively. The FOM values of these systems are all among the top ones of the current high-efficiency OSC systems, revealing high cost-effectiveness of the two NFAs. This work provides a general but accessible strategy to minimize the efficiency-cost gap and promises the economic prospects of OSCs.

Hybrid Cathode Interlayer Enables 17.4% Efficiency Binary Organic Solar Cells.

With the emergence of fused ring electron acceptors, the power conversion efficiency of organic solar cells reached 19%. In comparison with the electron donor and acceptor materials progress, the development of cathode interlayers lags. As a result, charge extraction barriers, interfacial trap states, and significant transport resistance may be induced due to the unfavorable cathode interlayer, limiting the device performances. Herein, a hybrid cathode interlayer composed of PNDIT-F3N and PDIN is adopted to investigate the interaction between the photoexcited acceptor and cathode interlayer. The state of art acceptor Y6 is chosen and blended with PM6 as the active layer. The device with hybrid interlayer, PNDIT-F3N:PDIN (0.6:0.4, in wt%), attains a power conversion efficiency of 17.4%, outperforming devices with other cathode interlayer such as NDI-M, PDINO, and Phen-DPO. It is resulted from enhanced exciton dissociation, reduced trap-assisted recombination, and smaller transfer resistance. Therefore, the hybrid interlayer strategy is demonstrated as an efficient approach to improve device performance, shedding light on the selection and engineering of cathode interlayers for pairing the increasing number of fused ring electron acceptors.

Symmetrically Fluorinated Benzo[1,2-b:4,5-b']dithiophene-Cored Donor for High-Performance All-Small-Molecule Organic Solar Cells with Improved Active Layer Morphology and Crystallinity.

Side-chain engineering is an efficient molecular design strategy for morphology optimization and performance improvement of organic solar cells (OSCs). Herein, a novel small-molecule donor C-2F, which owns a benzo[1,2-b:4,5-b']dithiophene (BDT) central unit with a symmetrically difluorinated benzene ring as a conjugated side chain, has been synthesized. The conjugated side chain possesses both the symmetry and halogenation effect in novel small molecular donor material. The photovoltaic devices were fabricated with N3 as an acceptor. C-2F:N3 based devices achieved an outstanding power conversion efficiency of 14.64% with a Jsc of 24.87 mA/cm2, a Voc of 0.85 V, and an FF of 69.33%. Then, we investigated the basic material properties, photovoltaic mechanism, and active layer morphology, and the results show that this molecular design strategy of the symmetrically difluorinated moiety as the conjugated side chain provides an effective method for fine-tuning the molecular stacking pattern and active layer phase separation morphology, to improve the all-small-molecule (ASM) OSCs' performances.

15.3% Efficiency All-Small-Molecule Organic Solar Cells Achieved by a Locally Asymmetric F, Cl Disubstitution Strategy.

Single junction binary all-small-molecule (ASM) organic solar cells (OSCs) with power conversion efficiency (PCE) beyond 14% are achieved by using non-fullerene acceptor Y6 as the electron acceptor, but still lag behind that of polymer OSCs. Herein, an asymmetric Y6-like acceptor, BTP-FCl-FCl, is designed and synthesized to match the recently reported high performance small molecule donor BTR-Cl, and a record efficiency of 15.3% for single-junction binary ASM OSCs is achieved. BTP-FCl-FCl features a F,Cl disubstitution on the same end group affording locally asymmetric structures, and so has a lower total dipole moment, larger average electronic static potential, and lower distribution disorder than those of the globally asymmetric isomer BTP-2F-2Cl, resulting in improved charge generation and extraction. In addition, BTP-FCl-FCl based active layer presents more favorable domain size and finer phase separation contributing to the faster charge extraction, longer charge carrier lifetime, and much lower recombination rate. Therefore, compared with BTP-2F-2Cl, BTP-FCl-FCl based devices provide better performance with FF enhanced from 71.41% to 75.36% and J sc increased from 22.35 to 24.58 mA cm-2, leading to a higher PCE of 15.3%. The locally asymmetric F, Cl disubstitution on the same end group is a new strategy to achieve high performance ASM OSCs.

A "σ-Hole"-Containing Volatile Solid Additive Enabling 16.5% Efficiency Organic Solar Cells.

Here we introduce a σ-hole-containing volatile solid additive, 1, 4-diiodotetrafluorobenzene (A3), in PM6:Y6-based OSCs. Aside from the appropriate volatility of A3 additive, the synergetic halogen interactions between A3 and photoactive matrix contribute to more condensed and ordered molecular arrangement in the favorable interpenetrating donor/acceptor domains. As a result, greatly accelerated charge transport process with suppressed charge recombination possibility is observed and ultimately a champion PCE value of 16.5% is achieved. Notably, the A3 treated OSCs can maintain a high efficiency of over 16.0% in a wide concentration range of A3 additive between 10 and 35 mg/mL. The A3-treated device shows excellent stability with an efficiency of 15.9% after 360-h storage. This work demonstrates that the σ-hole interaction can be applied to enhance the OSC performance and highlights the importance of non-covalent interactions in the optoelectronic materials.