An improved ternary vector system for Agrobacterium-mediated rapid maize transformation.

KEY MESSAGE: A simple and versatile ternary vector system that utilizes improved accessory plasmids for rapid maize transformation is described. This system facilitates high-throughput vector construction and plant transformation. The super binary plasmid pSB1 is a mainstay of maize transformation. However, the large size of the base vector makes it challenging to clone, the process of co-integration is cumbersome and inefficient, and some Agrobacterium strains are known to give rise to spontaneous mutants resistant to tetracycline. These limitations present substantial barriers to high throughput vector construction. Here we describe a smaller, simpler and versatile ternary vector system for maize transformation that utilizes improved accessory plasmids requiring no co-integration step. In addition, the newly described accessory plasmids have restored virulence genes found to be defective in pSB1, as well as added virulence genes. Testing of different configurations of the accessory plasmids in combination with T-DNA binary vector as ternary vectors nearly doubles both the raw transformation frequency and the number of transformation events of usable quality in difficult-to-transform maize inbreds. The newly described ternary vectors enabled the development of a rapid maize transformation method for elite inbreds. This vector system facilitated screening different origins of replication on the accessory plasmid and T-DNA vector, and four combinations were identified that have high (86-103%) raw transformation frequency in an elite maize inbred.

An enzyme-linked immunosorbent assay for monoester-type aconitic alkaloids and its application in the pharmacokinetic study of benzoylhypaconine in rats.

A new enzyme-linked immunosorbent assay (ELISA) method for quantitative determination of monoester-type aconitic alkaloids was developed. The antibodies derived from the immunogen of benzoylmesaconine (BM) could be electively affined to benzoylaconitine-type alkaloids with an ester bond (14-benzoyl-), especially to benzoylhypaconine (BH, 140.02% of cross-reactivity). The effective working range of BH was 1 ng/ml to 5 µg/ml; the lower limit of detection and the quantification were 0.35 and 0.97 ng/ml, respectively. The values of CV for intra-day and inter-day assays and recovery ratios were in acceptable ranges. The results of stability experiments were also satisfactory. This validated method was employed for pharmacokinetic study of BH in rats and the bioavailability orally administered was estimated to be 16.3%.

Studies on the flavone glycosides from Fructus Kochiae.

A series of flavone glycosides were isolated from Fructus Kochiae for the first time, including two new flavone glycosides. The structures were established by interpretation of their spectroscopic data. Two new flavone glycosides are quercetin 3-O-ß-d-apiofuranosyl-(1 â†’ 2)-ß-d-galactopyranosyl-7-O-ß-d-glucopyranoside (1) and quercetin 3-O-α-l-rhamnopyranosyl-(1 â†’ 6)-ß-d-galactopyranosyl-7-O-ß-d-sophoroside (2). The others are quercetin 7-O-ß-d-glucopyranoside (3), quercetin 3-O-ß-d-apiofuranosyl-(1 â†’ 2)-ß-d-galactopyranoside (4), quercetin 3-O-ß-d-galactopyranosyl-7-O-ß-d-glucopyranoside (5), and quercetin 7-O-ß-d-sophoroside (6).

Value of enhanced computed tomography in differentiating small mesenchymal tumours of the gastrointestinal from smooth muscle tumours.

BACKGROUND: Computed tomography (CT) technology has been gradually used in the differentiation of small mesenchymal tumors of the stomach and intestines from smooth muscle tumours. AIM: To explore the value of enhanced CT in the differentiation of small mesenchymal tumors of the stomach and intestines from smooth muscle tumours. METHODS: Clinical data of patients with gastric mesenchymal or gastric smooth muscle tumours who were treated in our hospital from May 2018 to April 2023 were retrospectively analysed. Patients were divided into the gastric mesenchymal tumor group and the gastric smooth muscle tumor group respectively (n = 50 cases per group). Clinical data of 50 healthy volunteers who received physical examinations in our hospital during the same period were selected and included in the control group. Serum levels of carcinoembryonic antigen (CEA), alpha-fetoprotein (AFP), carbohydrate antigen 19-9 (CA19-9), CA-125 and cytokeratin 19 fragment antigen 21-1 were compared among the three groups. The value of CEA and CA19-9 in the identification of gastric mesenchymal tumours was analysed using the receiver operating characteristic (ROC) curve. The Kappa statistic was used to analyse the consistency of the combined CEA and CA19-9 test in identifying gastric mesenchymal tumours. RESULTS: CEA levels varied among the three groups in the following order: The gastric mesenchymal tumour group > the control group > the gastric smooth muscle tumour group. CA19-9 levels varied among the three groups in the following order: The gastric mesenchymal group > the gastric smooth muscle group > the control group, the difference was statistically significant (P < 0.05). ROC analysis showed that the area under the curve of CEA and CA19-9 was 0. 879 and 0. 782, respectively. CONCLUSION: Enhanced CT has shown value in differentiating small mesenchymal tumors of the stomach and intestines from smooth muscle tumors.

Nanotopographical 3D-Printed Poly(ε-caprolactone) Scaffolds Enhance Proliferation and Osteogenic Differentiation of Urine-Derived Stem Cells for Bone Regeneration.

3D-printing technology can be used to construct personalized bone substitutes with customized shapes, but it cannot regulate the topological morphology of the scaffold surface, which plays a vital role in regulating the biological behaviors of stem cells. In addition, stem cells are able to sense the topographical and mechanical cues of surface of scaffolds by mechanosensing and mechanotransduction. In our study, we fabricated a 3D-printed poly(ε-caprolactone) (PCL) scaffold with a nanotopographical surface and loaded it with urine-derived stem cells (USCs) for application of bone regeneration. The topological 3D-printed PCL scaffolds (TPS) fabricated by surface epiphytic crystallization, possessed uniformly patterned nanoridges, of which the element composition and functional groups of nanoridges were the same as PCL. Compared with bare 3D-printed PCL scaffolds (BPS), TPS have a higher ability for protein adsorption and mineralization in vitro. The proliferation, cell length, and osteogenic gene expression of USCs on the surface of TPS were significantly higher than that of BPS. In addition, the TPS loaded with USCs exhibited a good ability for bone regeneration in cranial bone defects. Our study demonstrated that nanotopographical 3D-printed scaffolds loaded with USCs are a safe and effective therapeutic strategy for bone regeneration.

Simultaneously constructing nanotopographical and chemical cues in 3D-printed polylactic acid scaffolds to promote bone regeneration.

Topographical structures and bioactive surface coatings are effective in improving the biological function for bone regeneration. However, the simultaneous introduction of these benefits into three-dimensional (3D) porous scaffolds poses a daunting challenge. In this study, we proposed a simple yet effective approach to decorate 3D-printed polylactic acid (PLA) scaffolds with chemically modified nanotopographical patterns. The nanotopography was produced by etching the amorphous phase of PLA in an alcohol/alkali solution to expose dense lamellae. Subsequently, conformal decoration of polydopamine (PDA) was realized via self-assembly of catecholamines without changing the surface nanotopography. In vitro cell experiments including live and dead staining, cell morphology, cell growth, and alkaline phosphatase showed that the combination of nanotopography and PDA-coating led to a favorable enhancement of osteoblasts adhesion, spread and proliferation in 3D-printed scaffolds. The contribution of integrated patterns to bone regeneration was evaluated using a rat femur critical-sized defect model in vivo. Micro-CT evaluation and histological analysis demonstrated that the scaffold decorated with integrated pattens promoted osteogenesis more than the bare scaffolds and the scaffolds decorated with only nanotopography. Our proposed approach offers a promising method for improving bioactivity of 3D polymer scaffolds for bone tissue regeneration.

Promoted Bone Regeneration by 3D-Printed Porous Scaffolds with the Synergy of a Nanotopological Morphology and Amino Modification.

Three-dimensional (3D)-printed scaffolds have great advantages for bone repair, and the combination of physical and chemical modifications of the surface can improve deficient biological properties to promote bone regeneration. In this study, a nanotopological morphology and an amino group were introduced into scaffold surfaces in sequence by alkaline solution and amination, respectively. The surface properties and the ability for osteogenic induction were investigated. The nanotopological morphology of the surface slightly enhanced the hydrophilic property of the material, while amination obviously increased the hydrophilicity of the surface. The aminated surface improved cell adhesion and proliferation, while the nanotopological morphology was able to facilitate the spread of stem cells, pseudopod extension, and osteogenic differentiation by changing the cell skeleton. The study confirmed that a nanotopological morphology and an amino group can play synergistic roles in improving the osteogenic efficiency and hydrophilicity, which was also confirmed in vivo by showing that effective surface modification of polylactic acid scaffolds enhanced high-quality bone formation, thus demonstrating great potential for clinical applications. The results indicate that scaffolds with the synergy of a nanotopological morphology and amino modification improve the osteogenic induction ability of scaffolds.

Surface Epitaxial Crystallization-Directed Nanotopography for Accelerating Preosteoblast Proliferation and Osteogenic Differentiation.

Surface nanotopography provides a physical stimulus to direct cell fate, especially in the case of osteogenic differentiation. However, fabrication of nanopatterns usually suffers from complex procedures. Herein, a feasible and versatile method was presented to create unique nanosheets on a poly(ε-caprolactone) (PCL) substrate via surface epitaxial crystallization. The thickness, periodic distance, and root-mean-square nanoroughness of surface nanosheets were tunable by simply altering the PCL concentration in the growth solution. Epitaxial nanosheets possessed an identical composition as the substrate, being a prerequisite to revealing the independent effect of biophysical linkage on the osteogenic mechanism of the patterned surface. Preosteoblasts' response to the epitaxial nanosheets was examined in the aspect of preosteoblast proliferation and osteogenic differentiation. The expression of alkaline phosphatase, collagen type I, osteopontin, and osteocalcin as well as mineralization was significantly promoted by the epitaxial nanosheets. Acceleration of osteogenic differentiation was attributed to activating the TAZ/RUNX2 signaling pathway. The findings demonstrate that surface epitaxial crystallization is a feasible approach to design and construct nanotopography for bone tissue engineering.

Role of HA and BG in engineering poly(ε-caprolactone) porous scaffolds for accelerating cranial bone regeneration.

Effects of varied bioactive fillers on the biological behavior of porous polymer/inorganic composite scaffolds are lack of comprehensive comparison and remain elusive. Moreover, composite scaffolds with high porosity suffer from inferior mechanical performance. Herein, high-pressure molding and salt leaching were employed to prepare poly(ε-caprolactone) (PCL) composite porous scaffolds loaded with hydroxyapatite (HA) and bioactive glass (BG), respectively. Structural analysis indicated all the porous scaffolds presented interconnected open-pore structure with the porosity of ~87% and pore size of ~180 µm, hinging on the amounts and size of porogen. Compared to PCL/HA scaffolds, PCL/BG scaffolds showed ~2.3-fold augment in the water absorption. Attributing to the compact framework, the PCL/HA and PCL/BG porous scaffolds exhibited outstanding compressive modulus, which was notably higher than other PCL composite porous scaffolds reported in literatures. Cells culture results demonstrated that PCL/BG scaffolds displayed higher expression of osteogenic differentiation than PCL and PCL/HA scaffolds. Furthermore, in vivo results showed that more mature bone was formed within PCL/BG scaffolds than PCL/HA scaffolds, manifesting that the introduction of BG accelerated cranial bone regeneration to obtain complete bone healing within a short time. Therefore, these data indicate that PCL/BG scaffolds are more competitive for bone tissue engineering application. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 654-662, 2019.

Promoting osteoblast proliferation on polymer bone substitutes with bone-like structure by combining hydroxyapatite and bioactive glass.

Mimicking the structural features of natural bone has been demonstrated to bring pronounced advantages for mechanical reinforcement of polymeric orthopedic substitutes that are composed of bioinert polymer matrix and bioactive fillers. However, to trigger effective bone formation and implant integration, the bioactivity of bone substitutes plays a vital role. We hypothesized that the use of hydroxyapatite (HA) and bioactive glass (BG), compared to the use of HA alone, could improve the biological properties of polymer-based bone substitutes. Herein, high-density polyethylene (PE) composites loaded with HA and BG were fabricated using a modified injection molding machine that can provide intense shear flow to regulate the hierarchical structure of the composites. Morphological observation revealed that bone-like structures were formed in both HA/PE and BG/HA/PE composites, showing highly oriented interlocked shish kebabs. In addition, the bioactive fillers were distributed uniformly. Osteoblast proliferation was promoted by the combination of HA and BG. The mechanism was the upregulation of Runx2 expression (1.51 ±â€¯0.17) with BG and the activation of the TAZ/YAP (1.41/0.64) signaling pathway, which accelerated the generation of ossification-related proteins. BG can regulate microRNA to promote the mRNA expression of Runx2. The silencing of Runx2 expression can inhibit BG-induced osteoblast proliferation. These results suggest that the BG/HA/PE composites having a bone-like structure have high potential as bone substitutes to repair large bone defects.

Accelerating Bone Healing by Decorating BMP-2 on Porous Composite Scaffolds.

Although artificial polymeric scaffolds act as vital characters in bone repair, their application is limited due to their inferior bioactivity. Herein, osteoinductive poly(ε-caprolactone) (PCL) composite scaffolds were prepared by synchronously enlisting bioactive nanohydroxyapatite (nHA), bioglass (BG), and bone morphogenetic protein-2 (BMP-2), which was bound up with polydopamine (pDA). It was found that pDA deposition not only significantly enhanced hydrophilicity and cell affinity of composite scaffolds but also endowed steady immobilization of BMP-2 with long-term yet sustained release. Compared to pure PCL and PCL/nHA/BG (PHB) scaffolds, the designed PHB-pDA-BMP-2 scaffolds significantly induced the differentiation of bone marrow stromal cells toward an osteogenic lineage. Meanwhile, in vivo examinations revealed the prominent osteogenic capability of PHB-pDA-BMP-2 scaffolds, which enabled complete bone healing of calvarial bone defects in rabbits by 12 weeks. This finding indicates that the developed porous composite scaffolds hold great potential for bone regeneration.

Polydopamine-Assisted Anchor of Chitosan onto Porous Composite Scaffolds for Accelerating Bone Regeneration.

Surface function has an importance for the bioactivity of porous polymeric scaffolds. The goal of the present study is to immobilize highly bioactive chitosan (CS) onto the surface of porous composite scaffolds to accelerate bone regeneration. Porous poly(ε-caprolactone) (PCL)/bioactive glass (BG) composite scaffolds with strong anchor of CS were fabricated via mussel-inspired polydopamine (PDA) coating as a bridging layer. In vitro cell culture showed that firm immobilization of CS onto the composite scaffolds significantly enhanced protein adsorption, cell adhesion, and osteogenic differentiation compared to CS-decorated scaffolds via physical adsorption. In vivo assessments demonstrated that covalent immobilization of CS onto the surface of scaffolds obviously promoted cranial bone regeneration in comparison with the counterparts with physical adsorption of CS. The proposed method offers a feasible and effective means to fabricate artificial bioactive scaffolds for bone tissue engineering application.

Bone-like Polymeric Composites with a Combination of Bioactive Glass and Hydroxyapatite: Simultaneous Enhancement of Mechanical Performance and Bioactivity.

An ideal bone substitute requires not only high bioactivity but also sufficient mechanical performance, which is however inaccessible due to the lack of rational structure and composition design. Here, bioactive glass (BG)/hydroxyapatite (HA)/polyethylene (PE) composites with bone-like structure were prepared via a structuring injection molding. The strong and reciprocating shear field offered by the modified injection molding induced plenty of interlocked shish kebabs, mimicking the aligned collagen fibers in the natural bone. Such a bone-like structure enhanced the strength and toughness of the BG/HA/PE composites simultaneously, compensating the mechanical loss caused by the presence of BG. In vitro cell culture assays demonstrated that the combination of BG and HA significantly promoted cell attachment, proliferation, and alkaline phosphatase activity compared to the use of HA alone. It was attributed to upregulated expression of ß-catenin stimulated by BG. The mineralization in simulated body fluid revealed that the BG/HA/PE composite exhibited apatite-forming ability stronger than that of the HA/PE counterpart. The integration of excellent mechanical performance and high bioactivity demonstrated the significant potential of the structured BG/HA/PE composites as load-bearing bone substitutes.

Metabolomic compounds identified in Piriformospora indica-colonized Chinese cabbage roots delineate symbiotic functions of the interaction.

Root colonization by endophytic fungus Piriformospora indica facilitating growth/development and stress tolerance has been demonstrated in various host plants. However, global metabolomic studies are rare. By using high-throughput gas-chromatography-based mass spectrometry, 549 metabolites of 1,126 total compounds observed were identified in colonized and uncolonized Chinese cabbage roots, and hyphae of P. indica. The analyses demonstrate that the host metabolomic compounds and metabolite pathways are globally reprogrammed after symbiosis with P. indica. Especially, γ-amino butyrate (GABA), oxylipin-family compounds, poly-saturated fatty acids, and auxin and its intermediates were highly induced and de novo synthesized in colonized roots. Conversely, nicotinic acid (niacin) and dimethylallylpyrophosphate were strongly decreased. In vivo assays with exogenously applied compounds confirmed that GABA primes plant immunity toward pathogen attack and enhances high salinity and temperature tolerance. Moreover, generation of reactive oxygen/nitrogen species stimulated by nicotinic acid is repressed by P. indica, and causes the feasibility of symbiotic interaction. This global metabolomic analysis and the identification of symbiosis-specific metabolites may help to understand how P. indica confers benefits to the host plant.

Engineering Porous Poly(lactic acid) Scaffolds with High Mechanical Performance via a Solid State Extrusion/Porogen Leaching Approach.

A knotty issue concerning the poor mechanical properties exists in the porogen leaching approach to porous scaffolds, despite its advantage in tuning pore structure. To address this hurdle, solid state extrusion (SSE) combined with porogen leaching was utilized to engineer porous scaffolds of poly(lactic acid) (PLA). Advances introduced by poly(ethylene glycol) (PEG) caused the PLA ductile to be processed and, on the other hand, enabled the formation of interconnected pores. Thus, a well-interconnected porous architecture with high connectivity exceeding 97% and elevated porosity over 60% was obtained in the as-prepared PLA scaffolds with the composition of NaCl higher than 75.00 wt % and PEG beyond 1.25 wt %. More strikingly, the pore walls of macropores encompassed countless micropores and rough surface topography, in favor of transporting nutrients and metabolites as well as cell attachment. The prominent compressive modulus of the PLA scaffolds was in the range of 85.7⁻207.4 MPa, matching the normal modulus of human trabecular bone (50⁻250 MPa). By means of alkaline modification to improve hydrophilicity, biocompatible porous PLA scaffolds exhibited good cell attachment. These results suggest that the SSE/porogen leaching approach provides an eligible clue for fabricating porous scaffolds with high mechanical performance for use as artificial extracellular matrices.

Voltammetric study of the behavior of amaranth at a mercury thin film electrode on a silver substrate.

The voltammetric behavior of amaranth at a mercury thin film electrode on a silver substrate was studied in this paper. It was found that amaranth gave a sensitive reduction peak with the potential of -0.24 V at pH 4.0 in aqueous solution. The mercury thin film electrode on a silver substrate gave good reproducibility and useful life time. The peak currents depended linearly on the concentrations of amaranth from 0 to 100 ppb.