Successful Ultrasound-Guided Superficial Cervical Plexus Block Treatment for Head and Neck Pain with an Unusually Delayed Onset Following Ventriculoperitoneal Shunt: A Case Report.

Background and Objectives: Ventriculoperitoneal (VP) shunt placement is the most common treatment for cerebrospinal fluid diversion. Head and neck pain occurring after a long period following VP shunt insertion is rarely reported. Here, we present a rare case of head and neck pain occurring 2 years after surgery due to irritation of the superficial cervical plexus by the VP shunt. Case Description: A 46-year-old female patient received VP shunt placement surgery. Two years after the surgery, she experienced a left temporal headache with neck pain on the left side, which extended to the left para-auricular and fascial region. Ultrasound (US) scanning revealed that the VP shunt passed within the superficial cervical fascia and through the left sternocleidomastoid muscle (SCM). Additionally, friction of the branches of the superficial cervical plexus and of the greater auricular and lesser occipital nerves caused by the VP shunt was found underneath the lateral border of the SCM. Subsequently, the blocking and hydro-release of the left superficial cervical plexus were performed. After four series of treatments, the patient's head and neck pain vanished, and the frequency of the headaches was substantially reduced. The patient was regularly followed-up in the outpatient department of neurosurgery. Conclusions: Head and neck pain caused by the malpositioning of a VP shunt catheter with an unusually delayed onset is a rarely reported complication and could be easily neglected. Patients with head and neck pain following VP shunt insertion should be checked using US scanning to identify the potential origin of the pain and receive adequate treatments. Intraoperative US-guided tunnelling is suggested to avoid the malpositioning of the VP shunt catheter.

[Identification and biological characteristics of violet root rot pathogen of Pseudostellaria heterophylla in Fujian province].

Violet root rot is one of the main root diseases in the production process of Pseudostellaria heterophylla. To clarify the pathogenic species that cause the violet root rot of P. heterophylla in Fujian province, the roots and the sclerotia with violet root rot symptoms were collected from the main producing areas of P. heterophylla(Fujian province) from 2017 to 2021, and the pathogens were isolated by tissue separation method and identified by morphology and multi-gene phylogenetic analysis. Additionally, the biological characteristics of the pathogens were studied and the fungicides were determined. The results showed that 78 strains of violet root rot were isolated from the collected root samples, which belonged to one type after preliminary morphological identification. Two represen-tative strains were selected from the pathogens for multi-gene phylogenetic analysis, and they were clustered with Helicobasidium mompa together. The suitable culture conditions for the mycelium were OA medium, 25 ℃, pH 6, and ammonium oxalate as the nitrogen source. The lethal temperature of the mycelium was 50 ℃ for 10 minutes. Moreover, 99.1% propiconazole and 98.7% azoxystrobin had the optimal bacteriostatic effect, and the concentrations with the 50% bacteriostatic rate were 16.85 and 12.24 µg·mL~(-1), respectively. On the basis of the above results, the pathogen causing violet root rot of P. heterophylla in Fujian province was H. mompa. The medium type, growth temperature, pH value, nitrogen source, etc. had significant effect on the growth of mycelium.

[Identification and biological characterization of pathogen causing black spot of Pseudostellaria heterophylla in Fujian province].

In Zherong county, Fujian province, the black spot of Pseudostellaria heterophylla often breaks out in the rainy season from April to June every year. As one of the main leaf diseases of P. heterophylla, black spot seriously affects the yield and quality of the medicinal material. To identify and characterize the pathogens causing black spot, we isolated the pathogens, identified them as a species of Alternaria according to Koch's postulates, and then tested their pathogenicity and biological characteristics. The results showed that the pathogens causing P. heterophylla black spot were A. gaisen, as evidenced by the similar colony morphology, spore characteristics, sporulation phenotype, and the same clade with A. gaisen on the phylogenetic tree(the maximum likelihood support rate of 100% and the Bayesian posterior probability of 1.00) built based on the tandem sequences of ITS, tef1, gapdh, endoPG, Alta1, OPA10-2, and KOG1077. The optimum conditions for mycelial growth of the pathogen were 25 ℃, pH 5-8, and 24 h dark culture. The lethal conditions for mycelia and spores were both treatment at 50 ℃ for 10 min. We reported for the first time the A. gaisen-caused black spot of P. heterophylla. The results could provide a theoretical basis for the diagnosis and control of P. heterophylla leaf spot diseases.

Comparative analysis of 17 complete chloroplast genomes reveals intraspecific variation and relationships among Pseudostellaria heterophylla (Miq.) Pax populations.

Pseudostellaria heterophylla (Miq.) Pax is a well-known medicinal and ecologically important plant. Effectively distinguishing its different genetic resources is essential for its breeding. Plant chloroplast genomes can provide much more information than traditional molecular markers and provide higher-resolution genetic analyses to distinguish closely related planting materials. Here, seventeen P. heterophylla samples from Anhui, Fujian, Guizhou, Hebei, Hunan, Jiangsu, and Shandong provinces were collected, and a genome skimming strategy was employed to obtain their chloroplast genomes. The P. heterophylla chloroplast genomes ranged from 149,356 bp to 149,592 bp in length, and a total of 111 unique genes were annotated, including 77 protein-coding genes, 30 tRNA genes, and four rRNA genes. Codon usage analysis showed that leucine had the highest frequency, while UUU (encoding phenylalanine) and UGC (encoding cysteine) were identified as the most and least frequently used codons, respectively. A total of 75-84 SSRs, 16-21 short tandem repeats, and 27-32 long repeat structures were identified in these chloroplast genomes. Then, four primer pairs were revealed for identifying SSR polymorphisms. Palindromes are the dominant type, accounting for an average of 47.86% of all long repeat sequences. Gene orders were highly collinear, and IR regions were highly conserved. Genome alignment indicated that there were four intergenic regions (psaI-ycf4, ycf3-trnS, ndhC-trnV, and ndhI-ndhG) and three coding genes (ndhJ, ycf1, and rpl20) that were highly variable among different P. heterophylla samples. Moreover, 10 SNP/MNP sites with high polymorphism were selected for further study. Phylogenetic analysis showed that populations of Chinese were clustered into a monophyletic group, in which the non-flowering variety formed a separate subclade with high statistical support. In this study, the comparative analysis of complete chloroplast genomes revealed intraspecific variations in P. heterophylla and further supported the idea that chloroplast genomes could elucidate relatedness among closely related cultivation materials.

Investigation of gauze and medical bottle co-pyrolysis on the product formation, reactivity, and reaction pathway of char, liquid oil, and gas.

Effective in-site treatment of medical waste has become a weak link in hospitals. Pyrolysis technology is a treatment method for medical waste that can enable rapid disposal in hospital settings and relieve environmental pressure, while also producing high-value products and reducing disposal costs. In this work, the effects of feedstock ratio and temperature on product yield and components of gauze (GA) and medical bottles (MB) co-pyrolysis have been investigated. The higher yield of solid products was obtained by co-pyrolysis of GA and MB at 400 ℃. With the addition of MB and an increase in temperature for the co-pyrolysis of GA and MB in a similar ratio, the pyrolysis oil and gas yields gradually increased. According to GC-MS analysis, co-feeding 75% MB to GA improved the alcohol content from 33.21% to a maximum yield of 59.8% at a pyrolysis temperature of 700 ℃. The content of aliphatic hydrocarbon reached 38.68% when the pyrolysis temperature and MB addition ratio were 700 °C and 75%, respectively. The GC data shows that the main gas components of co-pyrolysis of GA/MB were CH4 and H2, while the pyrolysis of pure GA or MB resulted in CO or CO2. Additionally, the solid carbon products obtained have an excellent pore structure. This strategy can benefit medical waste control and resource utilization for the low-cost disposal of medical waste and the acquisition of high-value resource products.

[Callus induction of Liriope muscari and its dynamic accumulation of polysaccharide].

OBJECTIVE: To study the induction rate of callus tissue in four different explants of stem, root, leaf and fruit of Liriope muscari. METHODS: The effect of 2,4-D, sugar and illumination on callus succeeding preservation was analyzed. The dynamic accumlation of polysaccharide in callus was described. The polysaccharide content among callus, tissue culture seedings and field seedings was compared. RESULTS AND CONCLUSION: The callus induction rate of stem was the highest. The optimal concentration range of 2,4-D was 1.5-2.0 mg/L, then the induction rate was 87.5%. When the 2,4-D conncentration was 0.5-1.0 mg/L, and the sucrose concentration was 20 g/L, the multiplication coefficient was highest. The illumination condition did not influence the effect of callus succeeding preservation. The content of callus polysaccharide continuously increased for 60 d. The growth rate of callus was reached the highest level from 40 d to 60 d. Polysaccharide content in root of tissue culture seeding was higher than that of the field seeding.

The gastrodin biosynthetic pathway in Pholidota chinensis Lindl. revealed by transcriptome and metabolome profiling.

Pholidota chinensis Lindl. is an epiphytic or lithophytic perennial herb of Orchidaceae family used as a garden flower or medicinal plant to treat high blood pressure, dizziness and headache in traditional Chinese medicine. Gastrodin (GAS) is considered as a main bioactive ingredient of this herb but the biosynthetic pathway remains unclear in P. chinensis. To elucidate the GAS biosynthesis and identify the related genes in P. chinensis, a comprehensive analysis of transcriptome and metabolome of roots, rhizomes, pseudobulbs and leaves were performed by using PacBio SMART, Illumina Hiseq and Ultra Performance Liquid Chromatography Tandem Mass Spectrometry (UPLC-MS/MS). A total of 1,156 metabolites were identified by UPLC-MS/MS, of which 345 differential metabolites were mainly enriched in phenylpropanoid/phenylalanine, flavone and flavonol biosynthesis. The pseudobulbs make up nearly half of the fresh weight of the whole plant, and the GAS content in the pseudobulbs was also the highest in four tissues. Up to 23,105 Unigenes were obtained and 22,029 transcripts were annotated in the transcriptome analysis. Compared to roots, 7,787, 8,376 and 9,146 differentially expressed genes (DEGs) were identified in rhizomes, pseudobulbs and leaves, respectively. And in total, 80 Unigenes encoding eight key enzymes for GAS biosynthesis, were identified. Particularly, glycosyltransferase, the key enzyme of the last step in the GAS biosynthetic pathway had 39 Unigenes candidates, of which, transcript28360/f2p0/1592, was putatively identified as the most likely candidate based on analysis of co-expression, phylogenetic analysis, and homologous searching. The metabolomics and transcriptomics of pseudobulbs versus roots showed that 8,376 DEGs and 345 DEMs had a substantial association based on the Pearson's correlation. This study notably enriched the metabolomic and transcriptomic data of P. chinensis, and it provides valuable information for GAS biosynthesis in the plant.