A Room-Temperature Surface Acoustic Wave Ammonia Sensor Based on rGO/DPP2T-TT Composite Films.

Surface acoustic wave (SAW) sensors based on reduced graphene oxide/poly (diketopyrrolopyrrolethiophene-thieno [3,2-b]thiophene-thiophene) (rGO/DPP2T-TT) composite sensing films for the detection of ammonia were investigated at room temperature in this study. The rGO/DPP2T-TT composite films were deposited onto ST-X quartz SAW resonators by a drop-casting method. FESEM, EDS, and XRD characterizations showed that the rGO/DPP2T-TT composite film was successfully synthesized and exhibited numerous wrinkles and a rough structure, which are crucial for gas adsorption. The frequency response to 500-1400 ppb ammonia shown by the prepared SAW sensor coated with rGO/DPP2T-TT composite film increased linearly as the ammonia concentration increased. The sensor based on a rGO/DPP2T-TT composite film exhibited a positive frequency shift of 55 Hz/ppm, and its frequency response to 500 ppb ammonia was 35 Hz. The sensors thus show promising potential in detecting sub-ppm concentration levels of NH3 at room temperature, which opens up possibilities for applications in the noninvasive detection of NH3 in the breath. As a result, the rGO/DPP2T-TT composite sensor can be a good candidate for in situ medical diagnosis and indoor/outdoor environment monitoring.

Impact of Recurrent Weight Gain Thresholds on Comorbid Conditions Progression Following Laparoscopic Sleeve Gastrectomy.

INTRODUCTION: Defining recurrent weight gain after metabolic bariatric surgery poses a significant challenge. Our study aimed to standardize recurrent weight gain measurements in patients undergoing laparoscopic sleeve gastrectomy (LSG) and ascertain its association with comorbidity progression. METHODS: We conducted a retrospective data analysis on 122 patients who underwent LSG, tracking their progress over 2-7 years. Data on weight, blood pressure measurements, and laboratory tests were collected, focusing on the postoperative period to identify nadir weight, total weight loss, and recurrent weight gain. RESULTS: Significant weight loss and comorbidity remission were noted, with diabetes, hypertension, and dyslipidemia showing substantial remission rates of 85.71%, 68.24%, and 85.37%, respectively. The median recurrent weight gain was 6.30 kg within 12 months of the nadir. Progression proportion of diabetes, hypertension, and dyslipidemia were 8.20%, 44.26%, and 40.98%, respectively. Hypertension progression was strongly associated with a recurrent weight gain ≥ 10 kg and ≥ 20% of maximum weight loss. Dyslipidemia progression was significantly correlated with recurrent weight gain ≥ 10 kg and ≥ 20% of maximum weight loss. Diabetes progression was significantly correlated with recurrent weight gain ≥ 10% of pre-surgery body weight and ≥ 25% of maximum weight loss. A ≥ 10% weight gain of maximum weight loss did not significantly impact the progression of these conditions. CONCLUSION: Recurrent weight gain ≥ 20% of maximum weight loss can be treated as a specific threshold indicating comorbidity progression post-LSG. Standardizing the measurement of recurrent weight gain can help healthcare providers to implement targeted management strategies to optimize long-term health outcomes.

Room-Temperature NH3 Gas Surface Acoustic Wave (SAW) Sensors Based on Graphene/PPy Composite Films Decorated by Au Nanoparticles with ppb Detection Ability.

Exhaled human breath analysis has great potential for the diagnosis of diseases in non-invasive way. The 13C-Urea breath test for the diagnosis of Helicobacter pylori infection indicates the ammonia concentration of 50-400 ppb in the breath. This work successfully developed a surface acoustic wave (SAW) resonator based on graphene/polypyrrole composite films decorated by gold nanoparticles (AuNPs-G/PPy) with sensitivity and selectivity to detect ammonia in parts-per-billion concentrations, which is promising for the accurate diagnosis of H. pylori infection. XRD, EDS, and SEM characterized the AuNPs-G/PPy nanocomposites, providing comprehensive insights into their structural, compositional, and morphological properties. The gas-sensing capabilities of the fabricated SAW sensors were extensively investigated, focusing on their response to NH3 gas at ambient temperature. The concentration of ammonia gas was effectively quantified by monitoring the frequency shift of the SAW device. Notably, our developed SAW sensor demonstrated outstanding sensitivity, selectivity, repeatability, and reproducibility for 50-1000 ppb NH3 in dry air. The excellent sensing performance of the AuNPs-G/PPy hybrid composite film can be attributed to the synergistic effects of graphene's superior conductivity, the catalytic properties of gold nanoparticles, and the conductivity sensitization facilitated by electron-hole recombination on the polypyrrole surface.