PEO-Based Solid Composite Polymer Electrolyte for High Capacity Retention All-Solid-State Lithium Metal Battery.

The limited ionic conductivity at room temperature and the constrained electrochemical window of poly(ethylene oxide) (PEO) pose significant obstacles that hinder its broader utilization in high-energy-density lithium metal batteries. The garnet-type material Li6.4 La3 Zr1.4 Ta0.6 O12 (LLZTO) is recognized as a highly promising active filler for enhancing the performance of PEO-based solid polymer electrolytes (SPEs). However, its performance is still limited by its high interfacial resistance. In this study, a novel hybrid filler-designed SPE is employed to achieve excellent electrochemical performance for both the lithium metal anode and the LiFePO4 cathode. The solid composite membrane containing hybrid fillers achieves a maximum ionic conductivity of 1.9 × 10-4 S cm-1 and a Li+ transference number of 0.67 at 40 °C, respectively. Additionally, the Li/Li symmetric cells demonstrate a smooth and stable process for 2000 h at a current density of 0.1 mA cm-2 . Furthermore, the LiFePO4 /Li battery delivers a high-rate capacity of 159.2 mAh g-1 at 1 C, along with a capacity retention of 95.2% after 400 cycles. These results validate that employing a composite of both active and inactive fillers is an effective strategy for achieving superior performance in all-solid-state lithium metal batteries (ASSLMBs).

Recent Theoretical and Experimental Advancements of Aluminum-Sulfur Batteries.

Aluminum-sulfur batteries (AlSBs) exhibit significant potential as energy storage systems due to their notable attributes, including a high energy density, cost-effectiveness, and abundant availability of aluminum and sulfur. In order to commercialize AlSBs, an understanding of their working principles is necessary. In this review, we examine the current advancements in cathodes, both in theory and practice, as well as the progress made in aqueous and nonaqueous electrolytes. We also explore the modifications made to separators and the theoretical understanding of problems associated with AlSBs. Furthermore, we discuss future research directions aimed at resolving these issues. Our aim is to summarize the current progress in AlSBs and, based on recent progress and understanding of the mechanism, help design a battery to overcome the challenges that such batteries have been facing.

Micro and Nanoporous Membrane Platforms for Carbon Neutrality: Membrane Gas Separation Prospects.

Recently, carbon neutrality has been promoted as a potentially practical solution to global CO2 emissions and increasing energy-consumption challenges. Many attempts have been made to remove CO2 from the environment to address climate change and rising sea levels owing to anthropogenic CO2 emissions. Herein, membrane technology is proposed as a suitable solution for carbon neutrality. This review aims to comprehensively evaluate the currently available scientific research on membranes for carbon capture, focusing on innovative microporous material membranes used for CO2 separation and considering their material, chemical, and physical characteristics and permeability factors. Membranes from such materials comprise metal-organic frameworks, zeolites, silica, porous organic frameworks, and microporous polymers. The critical obstacles related to membrane design, growth, and CO2 capture and usage processes are summarized to establish novel membranes and strategies and accelerate their scaleup.

Mycotoxin detection in selected medicinal plants using chromatographic techniques.

Mycotoxins are toxic mycological products that when consumed, absorbed or inhaled cause sickness or even the death of humans. Therefore, the present study aimed to evaluate the contamination levels of mycotoxins (aflatoxins, AFB1 , AFB2 , AFG1 , AFG2 , and ochratoxin A, OTA) in selected medicinal herbs and shrubs using thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC). A total of 15 samples of medicinal herbs and shrubs were selected. Among them, four samples were aflatoxin contaminated while two samples were ochratoxin A contaminated. The highest level of aflatoxin was detected in Justicia adhathoda (4,704.94 ppb) through HPLC (153.4 ppb) and through TLC, while the lowest level of aflatoxin was detected in Pegnum harmala (205.1 ppb) through HPLC. Similarly, the highest level of OTA was detected in Dodonia viscosa (0.53 ppb) through HPLC (0.5 ppb) and through TLC, while the lowest level was detected in J. adhathoda (O.11 ppb) through HPLC (0.4 ppb) and through TLC. The OTA concentration was very low, being negligible and below permissible limits. The present study concludes that there is a potential risk for the consumption of herbal decoctions. Therefore, regular monitoring and proper management of mycotoxins, including aflatoxins and OTA, in herbal medicines are needed to ensure the safety of herbal drugs to protect consumers.

Exposure to secondary traumatic stress and its related factors among emergency nurses in Saudi Arabia: a mixed method study.

BACKGROUND: Emergency department (ED) nurses are exposed to the risk of secondary traumatic stress (STS), which poses a threat not only to nurses' health and psychological well-being but also adversely affects the execution of their professional duties. The quality and outcome of their nursing services are negatively affected by STS. PURPOSE: The purpose of this study is to comprehensively investigate the prevalence and intensity of Secondary Traumatic Stress (STS) among Emergency Department (ED) nurses. It aims to identify and analyze the socio-demographic, occupational, and psychological factors that influence the severity and variation of STS experienced by these nurses. METHODS: The study utilized a sequential explanatory mixed methods approach, including two phases. Phase 1 employed a cross-sectional study design, utilizing a convenience sample of 181 nurses to explore the levels of STS and the factors associated with it. Following this, Phase 2 was structured as a qualitative descriptive study, which involved conducting semi-structured interviews with a purposefully selected group of ten ED nurses. Data collection took place at three major hospitals in Saudi Arabia during the period from January to June 2022. RESULTS: A total of 181 participants were included in the study. The mean STSS score reported by the nurses was 51 (SD = 13.23) out of the maximum possible score of 85, indicating severe STS among ED nurses. Factors associated with an increase in the levels of STS among ED nurses included being female, older in age, married, possessing higher education and experience, having a positive relationship with colleagues, receiving organisational support, and dealing with a higher number of trauma cases. Several themes emerged from the qualitative interviews including: ED Characteristics: Dual Impact on STS, Emotional Resonance and Vulnerability, Personal Life Stressors, The Ability to Cope, and Social Support. CONCLUSION AND IMPLICATIONS FOR PRACTICE: Future strategies and interventions targeting STS should be prioritized to effectively manage its impact on ED nurses. It is crucial to develop targeted interventions that address the specific factors contributing to STS, as identified in this study. Additionally, these findings aim to enhance awareness among nursing administrators, managers, and supervisors about the critical factors associated with STS. This awareness is essential for accurately assessing and developing interventions that mitigate STS among nursing staff.

Negatively Charged Holey Titania Nanosheets Added Electrolyte to Realize Dendrite-Free Lithium Metal Battery.

Electrolyte modulation and electrode structure design are two common strategies to suppress dendrites growth on Li metal anode. In this work, a self-adaptive electrode construction method to suppress Li dendrites growth is reported, which merges the merits of electrolyte modulation and electrode structure design strategies. In detail, negatively charged titania nanosheets with densely packed nanopores on them are prepared. These holey nanosheets in the electrolyte move spontaneously onto the anode under electrical field, building a mesoporous structure on the electrode surface. The as-formed porous electrode has large surface area with good lithiophilicity, which can efficiently transfer lithium ion (Li+ ) inside the electrode, and induce the genuine lithium plating/stripping. Moreover, the negative charges and nanopores on the sheets can also regulate the lithium-ion flux to promote uniform deposition of Li metal. As a result, the symmetric and full cells using the holey titania nanosheets containing electrolyte, show much better performance than the ones using electrolyte without holey nanosheets inside. This work points out a new route for the practical applications of Li-metal batteries.

3D Lithiophilic CuZrAg Metallic Glass Based-Current Collector for High-Performance Lithium Metal Anode.

Lithium metal anodes face several challenges in practical applications, such as dendrite growth, poor cycle efficiency, and volume variation. 3D hosts with lithiophilic surfaces have emerged as a promising design strategy for anodes. In this study, inspiration from the intrinsic isotropy, chemical heterogeneity, and wide tunability of metallic glass (MG) is drew to develop a 3D mesoporous host with a lithiophilic surface. The CuZrAg MG is prepared using the scalable melt-spinning technique and subsequently treated with a simple one-step chemical dealloying method. This resultes in the creation of a host with a homogeneously distributed abundance of lithium affinity sites on the surface. The excellent lithiophilic property and capability for uniform lithium deposition of the 3D CuZrAg electrode have been confirmed through theoretical calculations. Therefore, the 3D CuZrAg electrode displays excellent cyclic stability for over 400 cycles with 96% coulomb efficiency, and ultra-low overpotentials of 5 mV for over 2000 h at 1.0 mA cm-2 and 1.0 mAh cm-2 . Additionally, the full cells partied with either LiFePO4 or LiNi0.8 Co0.1 Mn0.1 O2 cathode deliver exceptional long-term cyclability and rate capability. This work demonstrates the great potential of metallic glass in lithium metal anode application.

Ternary Lithium Nickel Boride with 1D Rapid-Ion-Diffusion Channels as an Anode for Use in Lithium-Ion Batteries.

Anode materials with high-rate performances and good electrochemical stabilities are urgently required for the grid-scale application of lithium-ion batteries (LIBs). Theoretically, transition metal borides are desirable candidates because of their appropriate working potentials and good conductivities. However, the reported metal borides exhibit poor performances owing to their lack of favorable Li+ storage sites and poor structural stabilities during long-term charging/discharging. In this work, a ternary alkali metal boride, Li1.2 Ni2.5 B2 , which displays a high Li+ storage capacity and remarkable electrochemical stability and an excellent rate performance is studied. In contrast to conventional transition metal borides, the introduction of Li atoms facilitates the formation of 1D Ni/B-based honeycomb channels during synthesis. This Ni/B framework successfully sustains the strain during Li+ intercalation and deintercalation, and thus, the optimized Li1.2 Ni2.5 B2 anode exhibits an excellent cycle stability over 500 charge/discharge cycles. This electrode also exhibits superior reversible capacities of 350, 183, and 80 mA h g-1 at 0.1, 1, and 5 A g-1 , respectively, indicating the considerable potential of the 1D Ni/B framework as a commercially available fast-charging LIB anode.

In-Situ Construction of V2 O5 Nanosheet/Nitrogen-Doped Carbon Nanosheet Heterostructures with Interfacial C─O Bridging Bonds as the Cathode Material for Zn Ion Batteries.

Layered oxides are widely used as the electrode materials for metal ion batteries. However, for large radius size ions, such as Zn2+ and Al3+ , the tightly stacked layers and poor electrical conductivity of layered oxides result in restricted number of active sites and sluggish reaction kinetics. In this work, a facile in-situ construction strategy is provided to synthesize layered oxide nanosheets/nitrogen-doped carbon nanosheet (NC) heterostructure, which shows larger interlayer spacing and better electrical conductivity than the layered oxides. As a result, the Zn2+ ion diffusion inside the interlayer gallery is greatly enhanced and the storage sites inside the gallery can be better used. Meanwhile, the NC layers and oxide nanosheets are bridged by the C─O bonds to form a stable structure, which contributes to a better cycling stability than the pure layered oxides. The optimal V2 O5 @NC-400 cathode shows a capacity of 467 mA h g-1 at 0.1 A g-1 for 300 cycles, and long-term cyclic stability of 4000 cycles at 5 A g-1 with a capacity retention of 92%. All these performance parameters are among the best for vanadium oxide-based cathode materials.

Outcomes of Radioactive Iodine (131I) Therapy among Hyperthyroid patients.

Objective: The present study aimed to assess the thyroid outcomes six-months after radioactive Iodine-131 therapy (RIT) among hyperthyroid patients and identify the factors associated with them. Methods: This retrospective observational study was conducted at the department of Nuclear Medicine and Molecular Imaging, Northwest General Hospital & Research Centre during 2013 to 2019. For the study purpose, the thyroid outcomes of 153 hyperthyroid patients were studied retrospectively for six months after RIT. The data was obtained from the medical records. Patient baseline characteristics, clinical features, laboratory investigations, results of thyroid imaging, and therapeutic investigations were acquired and recorded in a structured questionnaire. Results: Out of the 153 screened records of hyperthyroid patients, 19.6% became euthyroid, 9.2% remained hyperthyroid, and 25.5% developed hypothyroidism after six months of RIT. The observed remission rate by the end of six months was 80.95%. Three months post-RIT, gender and RAI doses had a significant effect on thyroid function. The frequency of hypothyroidism was higher among those treated with an RAI dose of ≤ 20 mCi (83.0%) than those treated with a higher dose > 20 mCi (17%). Moreover, most patients receiving > 20 mCi radioiodine became euthyroid (64.5%). Similar outcomes were observed after six months of the therapy, except gender was replaced by etiologies of hyperthyroidism (p=0.009). Conclusion: Radioactive iodine (131-I) therapy is effective for the treatment of hyperthyroidism. However, the appropriate dose is still debatable, as there was a high incidence of hypothyroidism post-therapy.

Pattern of dyslipidemia and associated factors in coronary artery disease patients in Khyber Pakhtunkhwa: A cross-sectional secondary data analysis.

Objectives: To assess the prevalence, pattern, and associated factors of dyslipidemia in patients with coronary artery disease (CAD) in the Northwest region of Pakistan. Method: A cross-sectional secondary data analysis was performed on CAD patients visiting cardiology clinics in selected hospitals from July to December 2019. A total of 362 patients were included via consecutive sampling. Dyslipidemia was operationalized according to the "National Cholesterol Education Program (NCEP ATP III) guidelines". Results: Mixed dyslipidemia was recorded in 92.26% of the patients, while isolated dyslipidemia was observed in 5.24%. A high prevalence of combined dyslipidemia with increased LDL-C, TG, and low HDL-C was noted. Contrarily, elevated LDL-C was the commonest single lipid disorder (84.25%). Hypercholesterolemia was the least common disorder. Increasing BMI was found to be independently associated with hypercholesterolemia (OR: 1.19). Similarly, age (OR: 0.97) and being a rural resident (OR: 2.61) were independent factors associated with hypertriglyceridemia. Furthermore, being an urban resident (OR: 2.25) and increasing BMI (OR: 1.77) were also significantly associated with high LDL-C. Conclusion: Mixed dyslipidemias were observed in the majority of the patients. Age, BMI, and residence were noted to be independently associated with abnormal lipids. Early screening and proper management should be encouraged to minimize this significant cardiovascular risk.

Bridging 1D Inorganic and Organic Synthesis to Fabricate Ultrathin Bismuth-Based Nanotubes with Controllable Size as Anode Materials for Secondary Li Batteries.

The growth of ultrathin 1D inorganic nanomaterials with controlled diameters remains challenging by current synthetic approaches. A polymer chain templated method is developed to synthesize ultrathin Bi2 O2 CO3 nanotubes. This formation of nanotubes is a consequence of registry between the electrostatic absorption of functional groups on polymer template and the growth habit of Bi2 O2 CO3 . The bulk bismuth precursor is broken into nanoparticles and anchored onto the polymer chain periodically. These nanoparticles react with the functional groups and gradually evolve into Bi2 O2 CO3 nanotubes along the chain. 5.0 and 3.0 nm tubes with narrow diameter deviation are synthesized by using branched polyethyleneimine and polyvinylpyrrolidone as the templates, respectively. Such Bi2 O2 CO3 nanotubes show a decent lithium-ion storage capacity of around 600 mA h g-1 at 0.1 A g-1 after 500 cycles, higher than other reported bismuth oxide anode materials. More interestingly, the Bi materials developed herein still show decent capacity at very low temperatures, that is, around 330 mA h g-1 (-22 °C) and 170 mA h g-1 (-35 °C) after 75 cycles at 0.1 A g-1 , demonstrating their promising potential for practical application in extreme conditions.

Diabetes mellitus and urinary tract infection: Causative uropathogens, their antibiotic susceptibility pattern and the effects of glycemic status.

OBJECTIVE: To determine causative uropathogens and their antibiotic susceptibility pattern among Type-2 diabetics (T2D) with good and suboptimal glycemic control. METHODS: A hospital based cross-sectional study was carried out in Peshawar from April-October, 2019. Four hundred consecutive T2D patients with symptomatic UTI or showing numerous pus cells on routine urinary examination attending outpatient clinic were included. As per the guidelines of the Clinical and Laboratory Standards Institute (CLSI), the urine samples collected were checked for identification of uropathogen by culture. Disc diffusion method was used to determined antimicrobial susceptibility. RESULTS: Of the total (n=400) T2D patients, 205 (51.25%) showed microbial growth. Mean age of patients with UTI was 63.26 ±12.30 years. About two-third (63.9%) of the patients were females. Mean HbA1c was 8.80±2.20%. The frequency of patients with UTI was noticeably greater in the suboptimal glycemic control group 178(86.3%) compared to good control glycemic patients 27(13.7%). Significant mean difference in glycemic levels were observed (HbA1c = 5.86±0.48 and HbA1c = 9.25±2.02, respectively, P < 0.001). E. coli was the predominant pathogen isolated 120(71%), followed by Klebsiella pneumonia Spp (K. pn) 35(17.1%), Pseudomonas auregonosa (P. aeruginosa) 14(6.83%), Enterococcus 12 (5.85%) and Candida Spp were 2(0.98%). Both gram positive and negative-bacteria were highly susceptible to imipenem, meropenem, fosfomycin and nitrofurantoin. CONCLUSION: The frequency of UTI in diabetics was higher in female in comparison to male, and was significantly greater in the suboptimal glycemic control group. E. coli was the most typical isolate followed by K. pn. Imipenem, meropenem, fosfomycin and nitrofurantoin had high susceptibility profile against the isolated pathogens.

Correlation between Body Mass Index and Lipid Profile in patients with Type 2 Diabetes attending a tertiary care hospital in Peshawar.

OBJECTIVE: To determine the correlation between body mass index (BMI) and lipid profile in patients with Type 2 Diabetes (T2DM) attending a tertiary care hospital in Peshawar. METHODS: A total of 305 patients (men, 132; women, 173) with T2DM visiting an Outpatient department in Northwest General Hospital and Research Centre, Peshawar from January 2016 to July 2016 were included in this study. The whole blood and sera were analyzed for Glycated hemoglobin (HbA1c), total cholesterol (TC), triglyceride (TGs), high density lipoprotein cholesterol (HDL-C) and low density lipoprotein cholesterol (LDL-C). The correlation of BMI with lipid ratios and individual lipid indices were analysed. RESULTS: Mean of BMI was 29.29±5.23. Dyslipidemia; increased TC, increased LDL-C, increased triglyceride and decreased HDL-C were noted in 40.7%, 54.1%, 69.5% and 41% respectively. The mean difference of LDL-C (p=0.006) was significant between male and female. BMI, TC, TGs, and LDL-C showed no significant correlation where as a significant negative correlation between BMI and HDL-C was observed (r=-0.125, p=0.029, R2=0.016). The mean values of TC, TG, LDL-C, TC/ HDL-C and LDL/HDL were greater in patients with normal BMI compared to overweight and obese; however, the differences were not significant. HDL-C differed significantly in BMI groups (p=0.040). CONCLUSION: A significant negative correlation between BMI and HDL-C was observed, while the correlation between BMI and LDL-C was observed to be insignificant. HDL-C was found significantly higher in patients with normal BMI. These results are important to indicate that there is modest impact of BMI on lipid profile. Therefore, assessment and management for altered blood lipids should not be based on a patient's body weight or BMI.

An evaluation and comparison of myeloperoxidase enzymatic activity during initial orthodontic alignment: an in vivo study.

INTRODUCTION: Tooth movement during orthodontic treatment is possible because of mechanical force-induced inflammation and remodelling in the periodontal ligament. Variation in the inflammatory response might be anticipated with initial aligning archwires of different composition. Myloperoxidase (MPO) is an enzyme found in neutrophil granules that represents an important marker of inflammation. The aim of this study was to measure MPO enzyme activity during initial alignment with orthodontic arch wires of different alloy types. MATERIALS AND METHODS: MPO activity was determined in gingival crevicular fluid (GCF) from a sample of 60 patients divided into three groups during initial orthodontic alignment with three types of arch wire (0.016-inch superelastic (SE) NiTi; 0.016-inch heat-activated (HANT) NiTi and 0.00175-inch multistranded stainless steel). MPO activity was measured at baseline, 2 hours, 7 and 14 days after appliance activation. RESULTS: MPO activity was significantly increased in GCF at 2 hours (P < 0.01), 7 and 14 days in all groups compared to baseline. Enzymatic activity was highest in the SE NiTi group followed by HANT and multistranded stainless steel groups but with no significant difference between SE NiTi and HANT groups. CONCLUSION: SE and HANT NiTi arch wires produce an increased inflammatory response based upon MPO activity during initial levelling and alignment compared to multistranded stainless steel.

Effects of temperature and storage on the antioxidant potential, polyphenols and Vitamin-C contents of azadirachta indica leave aqueous extract.

The aim of the study was to investigate the effects of effects of storage and temperature on the antioxidant potential, vitamin-C contents, total as well as selected individual phenolic acids and flavonoids of fresh aqueous leaves extract of Azadirachta Indica. The antioxidant activity of Azadirachta Indica leaves aqueous extract was determined by scavenging of DPPH free radical, while the phenolic compounds and vitamin-C contents by HPLC method. The analyses were carried out on crude extract of fresh leaves and after storage time of 1, 2 and 3 month at temperature of 20, 30 and 50°C. Storage for longer duration and rise in temperature caused decreasing the phenolic acids and vitamin C contents as well as antioxidant potential. Vitamin C contents were decreased up to 91% upon storage for 3 months at 50°C, while the anti-oxidant potential was decreased 29 %. The effect of storage time and temperature on individual phenolic acid and flavonoids were also remarkable, except ferulic acid which increased upon storage and rise in temperature.

Eupalitin induces apoptosis in prostate carcinoma cells through ROS generation and increase of caspase-3 activity.

Prostate cancer is the second most common malignancy in the human reproductive system. Eupalitin is one of the O-methylated flavonol-exhibited enhanced cancer chemopreventive agents. The current study highlights the structural determination of eupalitin and aims to explore the antitumor activity of eupalitin in human prostate cancer cell (PC3) and its underlying mechanism. Eupalitin structure was determined by using FTIR, (1)H NMR, and (13)C NMR. PC3 cells were treated with increasing concentrations of eupalitin, followed by analysis of the cell viability with an MTT assay. The results demonstrated that eupalitin markedly inhibited the proliferation of PC3 cells in a concentration-dependent manner. The results from fluorescent microscopic analysis of nuclear condensation and intracellular ROS generation determined that eupalitin significantly induced ROS level lead to nuclear apoptosis. Cell cycle analysis revealed that eupalitin-induced cell cycle progression as a percentage of cells in G0/G1 phase decreased whereas S phase increased. Caspase-3 immunofluorescence analysis confirms the efficacy of eupalitin-inducing apoptotic pathway and cell death. Thus, our study is helpful in understanding the mechanism underlying these effects in prostate cancer and it may provide novel molecular targets for prostate cancer therapy.

A prospective observational study assessing the outcome of Sepsis in intensive care unit of a tertiary care hospital, Peshawar.

OBJECTIVE: The current study aims to explore the factors associated with outcome among patients with severe sepsis and septic shock admitted to the intensive care unit, Northwest General Hospital and Research Centre, Peshawar, Pakistan. METHODS: A prospective observational study was carried out at intensive care unit of our hospital from February 2014 to October 2015. Data was collected using a structured format and statistical analysis was done using SPSS version 20®. Regression model was applied to identify the factors contributing to the outcome of severe sepsis and septic shock. P-value less than 0.05 was considered statistically significant. RESULTS: Majority of the patients meeting the criteria of this study were male 147 (54.9%) with a mean age of 54.8. The most common source of sepsis was lung infections (42.2%) followed by urinary tract infections (18.7%), soft tissue infections (6.3%) abdominal infections (6%) and in 6.3% patients the source remained unknown. Further analysis has revealed that increase in number of days of hospitalization was observed to be slightly associated with the outcome of the treatment (1.086 [1.002 - 1.178], 0.046). Moreover, the risk of mortality was the higher among the patients with septic shock 22.161[10.055 - 48.840], and having respiratory, kidney and central nervous system complications. Overall it is seen that septic shock alone was found responsible to cause death among 32.0% of the patients (Model 1: R(2) 0.32, p=0.000), and upon involvement of the organ complications the risk of mortality was observed to 42.0%. CONCLUSION: Chances of recovery were poor among the patients with septic shock. Moreover, those patients having respiratory and urinary tract infection are least likely to survive.

Ethanolic extract of Nigella sativa protects Fe(II) induced lipid peroxidation in rat's brain, kidney and liver homogenates.

The study describes the effect of ethanolic extract of Nigella sativa against Fe(II) induced lipid peroxidation. Basal and Fe(II) induced thiobarbituric acid reactive species (TBARS) production was significantly inhibited by the ethanolic extract of Nigella sativa at 25-200 µg/ml. Our data revealed that the extract has high DPPH radical scavenging activity at highest tested concentrations. The extract significantly chelated Fe(II) and scavenged hydroxyl (OH) radical at 25-200µg/ml concentration. The nutritional analysis was performed and carbohydrate, fats, fiber, protein, moisture and ash content were measured in the studied extract. The phytochemical analysis confirmed the presence of alkaloid, carbohydrate & sugar, glycosides, phenolic compounds, flavonoids, protein and amino acid, phytosterols, tannins, gum and mucilage. The extract also showed significant antimicrobial activities against 10 bacterial strains i.e. Salmonella typhi, Bacillus subtilis, Bacillus cereus, Klebsiella pneumonia, Escheria coli, Xanthomonas, Salmonella heidelberg, Staphylococcus aureus, Clostridium and Escheria coli (human) and 5 fungal strains i.e. Aspergillus niger, Entomola, Aspergillus flavus, Alternaria alternata and Penicillium. This study confirms the potential antioxidant and antimicrobial activities of ethanolic extract of Nigella sativa which can be considered not only as a diet supplement but can be used against a variety of free radical induced damage diseases.

CO2 adsorption using TiO2 composite polymeric membranes: A kinetic study.

CO2 is the main greenhouse gas which causes global climatic changes on larger scale. Many techniques have been utilised to capture CO2. Membrane gas separation is a fast growing CO2 capture technique, particularly gas separation by composite membranes. The separation of CO2 by a membrane is not just a process to physically sieve out of CO2 through the controlled membrane pore size. It mainly depends upon diffusion and solubility of gases, particularly for composite dense membranes. The blended components in composite membranes have a high capability to adsorb CO2. The adsorption kinetics of the gases may directly affect diffusion and solubility. In this study, we have investigated the adsorption behaviour of CO2 in pure and composite membranes to explore the complete understanding of diffusion and solubility of CO2 through membranes. Pure cellulose acetate (CA) and cellulose acetate-titania nanoparticle (CA-TiO2) composite membranes were fabricated and characterised using SEM and FTIR analysis. The results indicated that the blended CA-TiO2 membrane adsorbed more quantity of CO2 gas as compared to pure CA membrane. The high CO2 adsorption capacity may enhance the diffusion and solubility of CO2 in the CA-TiO2 composite membrane, which results in a better CO2 separation. The experimental data was modelled by Pseudo first-order, pseudo second order and intra particle diffusion models. According to correlation factor R(2), the Pseudo second order model was fitted well with experimental data. The intra particle diffusion model revealed that adsorption in dense membranes was not solely consisting of intra particle diffusion.