RESUMO
INTRODUCTION: Orally disintegrating tablets (ODTs) are designed to dissolve in the oral cavity within 3 min, providing a convenient option for patients as they can be taken without water. Direct compression is the most common method used for ODTs formulations. However, the availability of single composite excipients with desirable characteristics such as good compressibility, fast disintegration, and a good mouthfeel suitable for direct compression is limited. OBJECTIVE: This research was proposed to develop a co-processed excipient composed of xylitol, mannitol, and microcrystalline cellulose for the formulation of ODTs. METHODS: A total of 11 formulations of co-processed excipients with different ratios of ingredients were prepared, which were then compressed into ODTs, and their characteristics were thoroughly examined. The primary focus was on evaluating the disintegration time and hardness of the tablets, as these factors are important in ensuring the ODTs meet the desired criteria. The model drug, Mirtazapine was then incorporated into the chosen optimized formulation. RESULTS: The results showed that the formulation comprised of 10% xylitol, 10% mannitol and 80% microcrystalline cellulose demonstrated the fastest disintegration time (1.77 ± 0.119 min) and sufficient hardness (3.521 ± 0.143 kg) compared to the other formulations. Furthermore, the drug was uniformly distributed within the tablets and fully released within 15 min. CONCLUSION: Therefore, the developed co-processed excipients show great potential in enhancing the functionalities of ODTs, offering a promising solution to improve the overall performance and usability of ODTs in various therapeutic applications.
Assuntos
Excipientes , Xilitol , Humanos , Excipientes/química , Mirtazapina , Composição de Medicamentos/métodos , Solubilidade , Administração Oral , Comprimidos/química , Manitol/químicaRESUMO
Aim: The objective of this study was to develop and characterize the physical properties of fast-melting tablets (FMTs) using cocoa butter as the base and caffeine as the model drug. Method: The simple refrigerator freezing method was employed to prepare caffeine-loaded, FMTs from cocoa butter bases. Results: The F3 chosen formulation achieved a disintegration time of 1.20 min ± 0.035, which falls within the specified limit set by the European Pharmacopoeia. The cumulative drug release data of F3, was 88.52 and 94.08% within 60 and 75 min, respectively (NLT 85% as per US FDA requirement). All the other physical test standards for FMTs met the pharmacopeial specifications. Conclusion: Based on the findings, the simple refrigerator freezing method could be used to formulate FMTs.
Patient-friendly natural caffeine-loaded cocoa butter-based fast-melting tablets with rapid disintegration, affordability, safety and biocompatibility are an efficient base for drug delivery.
RESUMO
Microneedle (MN) delivery devices are more accepted by people than regular traditional needle injections (e.g. vaccination) due to their simplicity and adaptability. Thus, patients of chronic diseases like diabetes look for alternative pain-free treatment regimens circumventing regular subcutaneous injections. Insulin microneedles (INS-MNs) are a thoughtfully researched topic (1) to overcome needle phobia in patients, (2) for controlled delivery of the peptide, (3) decreasing the frequency of drug administration, (4) to ease the drug administration procedure, and (5) thus increasing patient adherence to the treatment dosage regimes. MNs physically disrupt the hard outer skin layer to create minuscule pores for insulin (INS) to pass through the dermal capillaries into the systemic circulation. Biodegradable polymeric MNs are of greater significance for INS and vaccine delivery than silicon, metal, glass, or non-biodegradable polymeric MNs due to their ease of fabrication, mass production, cost-effectiveness, and bioerodability. In recent years, INS-MNs have been researched to deliver INS through the transdermal implants, buccal mucosa, stomach wall, intestinal mucosal layers, and colonic mucosa apart from the usual transdermal delivery. This review focuses on the design characteristics and the applications of biodegradable/dissolvable polymeric INS-MNs in transdermal, intra-oral, gastrointestinal (GI), and implantable delivery. The prospective approaches to formulate safe, controlled-release INS-MNs were highlighted. Biodegradable/dissolvable polymers, their significance, their impact on MN morphology, and INS release characteristics were outlined. The developments in biodegradable polymeric INS-MN technology were briefly discussed. Bio-erodible polymer selection, MN fabrication and evaluation factors, and other design aspects were elaborated.
Assuntos
Sistemas de Liberação de Medicamentos , Insulina , Humanos , Administração Cutânea , Sistemas de Liberação de Medicamentos/métodos , Polímeros , Injeções Subcutâneas , Agulhas , PeleRESUMO
An alternative to oral administration for the delivery of therapeutic substances is the topical route, which frequently has comparable efficacy but may have a better tolerability profile. Gamma scintigraphy is a noninvasive technique that involves the application of radioactive substances to conduct biodistribution studies of therapeutic substances delivered through various routes. Nimesulide (NSD) was radiolabeled with technetium pertechnetate (Technetium99m [99mTc]) and this radiolabeled drug complex (99mTc-NSD) was used to prepare a topical gel formulation. The permeation of the radiolabeled drug from the topical gel was determined by gamma scintigraphy on human volunteers. The region of interest was calculated for the quantification of permeated radiolabeled drugs. This was observed that the mean percentage permeation of 99mTc-NSD was found to be 0.32 ± 0.22 to 36.37 ± 2.86 at 5 and 240 min. It was demonstrated that gamma scintigraphy may be a noninvasive and reliable technique for the determination of drug permeation through topical routes.
Assuntos
Sulfonamidas , Humanos , Voluntários Saudáveis , Distribuição Tecidual , CintilografiaRESUMO
Zinc oxide nanoparticles (ZnO-NPs) were synthesized using ginger (Zingiber officinale) extracts in a green synthesis approach and evaluated their in vitro cytotoxicity effect on the MDA-MB 231 breast cancer cell line. The bottom-up approach was employed to develop the green-synthesized ginger-encapsulated ZnO-NPs (GZnO-NPs) without using hazardous substances. The most substantial Fourier-transform infrared absorption peak of the ginger root extract was seen at 1634.24 cm-1. The peak also confirmed the presence of ginger root extract-encapsulated ZnO-NPs at 1556.79, 1471.54, and 1019.83 cm-1. It indicates that the biomolecules found in plant extracts behave as capping agents, aiding in the formation of nanoparticles. The mean particle sizes (PSs) of optimized GZnO-NPs of the ratios 1:2 were found to be 104.01 ± 7.12 nm with a zeta potential of -11.5 ± 1.31 mV. The X-ray diffraction and scanning electron microscope analysis confirmed that the prepared nanoparticles were spherical and crystalline, with PS ranging from 100 to 150 nm. The GZnO-NPs were subjected to MTT assay and cellular migration potential, and it was found that the inhibitory concentration on the MDA-MB 231 (breast) cancer cell line and scratch area showed a dose-dependent efficacy. The successfully green-synthesized GZnO-NPs effectively induced cell death in the MDA-MB 231 cancer cell line. The scratch assay results confirmed that prepared GZnO-NPs inhibited the proliferation and migration of cancerous cells.
RESUMO
Memantine hydrochloride is commonly prescribed for Alzheimer's disease and vascular dementia. However, the drug is only available in tablet form, a dosage form which is difficult for geriatrics to swallow. This problem is especially difficult for those patients diagnosed with Alzheimer's. This study was therefore aimed to develop and characterize an oral disintegrating film containing memantine hydrochloride using different types and concentrations of polymers. Using the solvent casting method, twelve formulations were developed, which involved manipulations on the type and concentration of the polymer. Afterwards, six formulations were selected to undergo characterization tests. These tests evaluated the films' tensile strength, Young's Modulus, percent elongation, folding endurance, disintegration and dissolution time, content uniformity, moisture loss, and moisture uptake. Polymers such as polyvinyl alcohol, hydroxypropyl methylcellulose, polyvinyl pyrrolidone, and pullulan gum were respectively incorporated at different concentrations. The study found that only hydroxypropyl methylcellulose and polyvinyl alcohol formulations developed into acceptable oral disintegrating films. Formulation E (hydroxypropyl methylcellulose 50-mg/film), which exhibited optimal mechanical strength, fast disintegration and dissolution, and excellent content uniformity, was identified as the best formula. Although polyvinyl alcohol showed higher mechanical strength, hydroxypropyl methylcellulose films were better at fulfilling the optimal characteristics of an oral disintegrating film. The study showed that the mechanical strength increased proportionally to the polymer concentration in the polyvinyl alcohol film. However, for the hydroxypropyl methylcellulose film, the mechanical strength increased only when hydroxypropyl methylcellulose's concentration was increased from a 40-mg/film to a 50-mg/film but decreased with a 60-mg/film. To summarize, orally disintegrating films containing memantine hydrochloride was developed, characterized, and reasoned to have high potential to be marketed and to increase medication compliance among geriatrics suffering from Alzheimer's disease.
Assuntos
Doença de Alzheimer , Química Farmacêutica , Humanos , Idoso , Memantina/uso terapêutico , Álcool de Polivinil/uso terapêutico , Doença de Alzheimer/tratamento farmacológico , Administração Oral , Derivados da Hipromelose/uso terapêutico , Solubilidade , Polímeros , Composição de Medicamentos/métodosRESUMO
Transferosomes are one of the vesicular carriers that have received extensive research and attention recently because of their capacity to get beyond the barriers posed by the stratum corneum to penetration. The intent of the current study is to optimize and evaluate proanthocyanidin (PAC) containing transferosomal transdermal gels. PAC-containing transferosomes were prepared using the film hydration method and then loaded into a 4% methylcellulose gel. A 23 Box-Behnken design was used to optimize the PAC-loaded transferosomal gel, where the effects of phospholipid 90 G (X1), Tween 80 (X2), and sonication time (X3) were evaluated. The formulation factors, such as the drug entrapment efficiency percentage (PEE) and in vitro drug release, were characterized. A PEE of 78.29 ± 1.43% and a drug release in vitro at 6 h of 24.2 ± 1.25% were obtained. The optimized transferosomal-loaded proanthocyanidin (OTP) formulation penetrated the porcine skin at an excellent rate (0.123 ± 0.0067 mg/cm2/h). Stability tests were conducted for OTP to predict the effects of various temperature conditions on the physical appearance, drug content, and PEE for periods of 15, 30, and 45 days. Finally, this transferosomal system for transdermal PAC delivery may be a suitable alternative to the conventional treatment for osteoarthritis.
RESUMO
The amlodipine besylate tablet is one of the most highly prescribed medicines to manage hypertension in the geriatric population. However, the difficulty of swallowing tablets due to problems like dysphagia, fear of choking, and odynophagia has been identified as one of the contributing factors to non-compliance among geriatrics. Due to the swallowing factor among geriatrics, this study was conducted to compare two compounding methods of orally disintegrating films, namely solvent casting and spray casting, to produce an orally disintegrating film containing amlodipine besylate. Different polymers were used to develop the orally disintegrating films, and the formulations were subjected to validation tests such as thickness, folding endurance, tensile strength, percentage of elongation, Young's modulus, disintegration, and dissolution. Chemicals like hydroxypropyl methylcellulose, carboxymethyl cellulose, glycerin, mannitol, sodium lauryl sulfate, citric acid, peppermint oil, and a coloring agent were used to formulate the orally disintegrating films. In addition, orally disintegrating films were prepared using the solvent casting and the spraying method. An increase in the polymer's concentration resulted in the formation of a greater mechanical strength. After a comparison between the hydroxypropyl methylcellulose and the carboxymethyl cellulose as film-forming agents, it was discovered that hydroxypropyl methylcellulose had greater mechanical film properties than carboxymethyl cellulose, except for the folding endurance. Moreover, hydroxypropyl methylcellulose was shown to have a better disintegration time, which was in the range of 30 minutes to 90 minutes, with a drug release of 95% to 100%, while carboxymethyl cellulose disintegrated at 6 minutes to 15 minutes with a drug release of 60% to 75%. On the other hand, both the solvent casting and spraying methods produced an evenly matched orally disintegrating film quality. Orally disintegrating films containing amlodipine besylate were developed and characterized. It was concluded that these orally disintegrating films have a great potential in the market and a profound ability in the reduction of geriatric non-compliance to antihypertensive drugs.
Assuntos
Anlodipino , Carboximetilcelulose Sódica , Administração Oral , Idoso , Composição de Medicamentos , Humanos , Derivados da Hipromelose/química , Solubilidade , Solventes , ComprimidosRESUMO
Progress in the drug delivery system in the last few decades has led to many advancements for efficient drug delivery. Both micro and nanorobots, are regarded as superior drug delivery systems to deliver drugs efficiently by altering other forms of energy into propulsion and movements. Furthermore, it can be advantageous as it is directed to targeted sites beneath physiological environments and conditions. They have been validated to possess the capability to encapsulate, transport, and supply therapeutic contents directly to the disease sites, thus enhancing the therapeutic efficiency and decreasing systemic side effects of the toxic drugs. This review discusses about the microand nanorobots for the diagnostics and management of diseases, types of micro, and nanorobots, role of robots in drug delivery, and its biomedical applications.
Assuntos
Sistemas de Liberação de MedicamentosRESUMO
Antimicrobials are widely used to treat bacteria, viruses, fungi, and protozoa. Therefore, research and development of newer types of antimicrobials are important. Antimicrobial resistance has emerged as a major challenge to the healthcare system, although various alternative antimicrobials have been proposed. However, none of these show consistent and comparable efficacy to antimicrobials in clinical trials. More recently, nanoparticles have emerged as a potential solution to antimicrobial agents to overcome antimicrobial resistance. This article revisits and updates applications of various types of nanoparticles for the delivery of antimicrobial agents and their characterization. Though nanoparticle technology has some limitations, it provides an innovative approach to pharmaceutical technology. Furthermore, nanoparticles offer a variety of advantages, such as enhancement of solubility and permeation, leading to better efficacy. In this article, approaches commonly employed to improve antimicrobial therapy are discussed. These approaches have advantages and applications and provide a broader opportunity for pharmaceutical scientists to choose the proper method per the desired outcome.
Assuntos
Anti-Infecciosos , Nanopartículas , Antibacterianos , Anti-Infecciosos/uso terapêutico , Bactérias , Sistemas de Liberação de Medicamentos , HumanosRESUMO
Background: Chemoresistance is a significant barrier to combating head and neck cancer, and decoding this resistance can widen the therapeutic application of such chemotherapeutic drugs. This systematic review and meta-analysis explores the influence of microRNA (miRNA) expressions on chemoresistance in head and neck cancers (HNC). The objective is to evaluate the theragnostic effects of microRNA expressions on chemoresistance in HNC patients and investigate the utility of miRNAs as biomarkers and avenues for new therapeutic targets. Methods: We performed a comprehensive bibliographic search that included the SCOPUS, PubMed, and Science Direct bibliographic databases. These searches conformed to a predefined set of search strategies. Following the PRISMA guidelines, inclusion and exclusion criteria were framed upon completing the literature search. The data items extracted were tabulated and collated in MS Excel. This spreadsheet was used to determine the effect size estimation for the theragnostic effects of miRNA expressions on chemoresistance in HNC, the hazard ratio (HR), and 95% confidence intervals (95% CI). The comprehensive meta-analysis was performed using the random effects model. Heterogeneity among the data collected was assessed using the Q test, Tau2, I2, and Z measures. Publication bias of the included studies was checked using the Egger's bias indicator test, Orwin and classic fail-safe N test, Begg and Mazumdar rank collection test, and Duval and Tweedie's trim and fill methods. Results: After collating the data from 23 studies, dysregulation of 34 miRNAs was observed in 2189 people. These data were gathered from 23 studies. Out of the 34 miRNAs considered, 22 were up-regulated, while 12 were down-regulated. The TaqMan transcription kits were the most used miRNA profiling platform, and miR-200c was seen to have a mixed dysregulation. We measured the overall pooled effect estimate of HR to be 1.516 for the various analyzed miRNA at a 95% confidence interval of 1.303-1.765, with a significant p-value. The null hypothesis test's Z value was 5.377, and the p-value was correspondingly noted to be less than 0.0001. This outcome indicates that the risk of death is determined to be higher in up-regulated groups than in down-regulated groups. Among the 34 miRNAs that were investigated, seven miRNAs were associated with an improved prognosis, especially with the overexpression of these seven miRNAs (miR15b-5p, miR-548b, miR-519d, miR-1278, miR-145, miR-200c, Hsa- miR139-3p). Discussion: The findings reveal that intricate relationships between miRNAs' expression and chemotherapeutic resistance in HNC are more likely to exist and can be potential therapeutic targets. This review suggests the involvement of specific miRNAs as predictors of chemoresistance and sensitivity in HNC. The examination of the current study results illustrates the significance of miRNA expression as a theragnostic biomarker in medical oncology.