RESUMO
With the rapid growth and development of proton-exchange membrane fuel cell (PEMFC) technology, there has been increasing demand for clean and sustainable global energy applications. Of the many device-level and infrastructure challenges that need to be overcome before wide commercialization can be realized, one of the most critical ones is increasing the PEMFC power density, and ambitious goals have been proposed globally. For example, the short- and long-term power density goals of Japan's New Energy and Industrial Technology Development Organization are 6 kilowatts per litre by 2030 and 9 kilowatts per litre by 2040, respectively. To this end, here we propose technical development directions for next-generation high-power-density PEMFCs. We present the latest ideas for improvements in the membrane electrode assembly and its components with regard to water and thermal management and materials. These concepts are expected to be implemented in next-generation PEMFCs to achieve high power density.
RESUMO
Porous flow fields distribute fuel and oxygen for the electrochemical reactions of proton exchange membrane (PEM) fuel cells through their pore network instead of conventional flow channels. This type of flow fields has showed great promises in enhancing reactant supply, heat removal, and electrical conduction, reducing the concentration performance loss and improving operational stability for fuel cells. This review presents the research and development progress of porous flow fields with insights for next-generation PEM fuel cells of high power density (e.g., â¼9.0 kW L-1). Materials, fabrication methods, fundamentals, and fuel cell performance associated with porous flow fields are discussed in depth. Major challenges are described and explained, along with several future directions, including separated gas/liquid flow configurations, integrated porous structure, full morphology modeling, data-driven methods, and artificial intelligence-assisted design/optimization.
RESUMO
BACKGROUND: Osteoporosis has become an important public health issue with the increase of aging population, and afflicts millions of people worldwide, particularly elderly or postmenopausal women. In the present study, we prepared compound amino acid chelated calcium (CAA-Ca) from processing by-products of Chlamys farreri, and evaluated its effect on postmenopausal osteoporosis with an ovariectomized (OVX) rat model. RESULTS: A 60-day treatment of OVX rats with CAA-Ca significantly enhanced the bone mineral density (BMD) and the bone calcium content. Meanwhile, some bone morphometric parameters, trabecular bone number (Tb.N), trabecular bone volume fraction (BV/TV), trabecular bone thickness (Tb.Th) and cortical bone wall thickness (Ct.Th), were also increased by 8.20%, 118.18%, 32.99% and 19.10%, respectively. In addition, the alkaline phosphatase (ALP) levels in serum were significantly reduced after CAA-Ca treatment, while the blood calcium levels were increased. Mechanistically, CAA-Ca down-regulated the levels of receptor activator of nuclear factor-κB (RANK) and receptor activator of nuclear factor-κB ligand (RANKL), and up-regulated osteoprotegerin (OPG) levels in osteoclasts, inhibiting bone resorption and bone loss. Meanwhile, CAA-Ca treatment raised ß-catenin levels and lowered Dickkopf1 (DKK1) levels in the Wnt signaling pathway of osteoblasts, which can promote calcium absorption and bone formation. CONCLUSION: The results suggested that CAA-Ca promoted bone formation, inhibited bone resorption and improved bone microstructure. Therefore, this study contributes to the potential application of CAA-Ca as a functional food resource in the treatment of postmenopausal osteoporosis. © 2021 Society of Chemical Industry.
Assuntos
Osteoporose Pós-Menopausa , Pectinidae , Idoso , Aminoácidos , Animais , Densidade Óssea , Cálcio , Feminino , Humanos , Osteoporose Pós-Menopausa/tratamento farmacológico , Ovariectomia , Ratos , Ratos Sprague-Dawley , Via de Sinalização WntRESUMO
Understanding the ice nucleation mechanism in the catalyst layers (CLs) of proton exchange membrane (PEM) fuel cells and inhibiting icing by designing the CLs can optimize the cold start strategies, which can enhance the performance of PEM fuel cells. Herein, mitigating the structural matching and templating effects by adjusting the surface morphology and wettability can inhibit icing on the platinum (Pt) catalyst surface effectively. The Pt(211) surface can inhibit icing because the atomic spacing of (211) crystalline surface is much larger than the characteristic distance of ice crystal, thereby mitigating the structural matching effects. A water overlayer on the Pt surface induced by the strong attraction of Pt can act as a template for ice layers and plays an important role in the icing process. Buckling of water overlayer due to the larger atomic spacing of (211) crystalline surface mitigates the templating effect and inhibits icing. Moreover, the water overlayer on the hydrophobic Pt(211) surface with fewer water molecules also mitigates the templating effect, which makes ice nucleation more difficult than homogeneous nucleation. These findings reveal the ice nucleation mechanisms on the Pt catalyst surface from the molecular level and are valuable for catalyst designs to inhibit icing in CL.
RESUMO
A novel one-step electrochemical synthesis of the reduced graphene oxide and poly(m-aminobenzenesulfonic acid, ABSA) nanocomposite (PABSA-rGNO) via pulse potentiostatic method (PPM) for direct and freely switchable detection of target genes is presented. Unlike most electrochemical preparation of hybrids based on rGNO and polymer, electrochemical synthesis of PABSA (during the pulse electropolymerization period of PPM) and electrochemical reduction of rGNO (during the resting period of PPM), in this paper, were alternately performed. The total progress synchronously resulted in PABSA-rGNO nanocomposite. This nanocomposite was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), Fourier Transform infrared spectroscopy (FT-IR), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The PABSA-rGNO nanocomposite integrated graphene (a single-atom thick, two-dimensional sheet of sp(2) bonded conjugated carbon) with PABSA (owning rich-conjugated structures, functional groups, and excellent electrochemical activity), which could serve as an ideal electrode material for biosensing and electrochemical cell, etc. As an example, the immobilization of the specific probe DNA was successfully conducted via the noncovalent method due to the π-π* interaction between conjugated nanocomposite and DNA bases. The hybridization between the probe DNA and target DNA induced the product dsDNA to be released from conjugated nanocomposite, accompanied with the self-signal regeneration of nanocomposite ("signal-on"). The self-signal changes served as a powerful tool for direct and freely switchable detection of different target genes, and the synergistic effect of PABSA-rGNO nanocomposite effectively improved the sensitivity for the target DNA detection.
Assuntos
Técnicas Eletroquímicas/métodos , Marcação de Genes/métodos , Engenharia Genética/métodos , Grafite/química , Nanocompostos/química , Ácidos Sulfanílicos/química , Óxidos/químicaRESUMO
In very recent years, polyaniline or its derivatives have been adopted to efficiently immobilize probe DNA via π-π interaction between conjugated interface and DNA bases. In this work, self-doped polyaniline (SPAN)-DNA hybrid was adopted as the platform to construct a DNA biosensor with label-free, reagentless and electrochemical self-signal amplifying features. This was achieved by the π-π interaction between conjugated SPAN and DNA bases, also the intrinsic differences between single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA). The tightly cross-linked hybrid was tethered to Au electrode, which had been anchored by p-aminothiophenol (PATP) self-assembled monolayer (SAM) previously, based on the phosphoramidate bond between PATP and ssDNA. SPAN in the recognition surface exhibited well-defined redox signals under neutral conditions. Due to the intrinsic property differences between ssDNA and dsDNA, such as rigidity, π-stacked bases, charge distribution and long-range electron transfer, SPAN-DNA underwent a major conformational change after hybridization. The redox behaviors of SPAN were modulated by DNA, which served as signals to monitor hybridization. As an example, the gene fragment related to one of the screening genes for the genetically modified plants, cauliflower mosaic virus 35S gene was satisfactorily detected with this strategy. Under optimal conditions, the dynamic range for the DNA assay was from 1.0 × 10(-14) mol L(-1) to 1.0 × 10(-8) mol L(-1) with the detection limit of 2.3 × 10(-15) mol L(-1). This work presents the construction of a recognition surface for the highly-sensitive electrochemical DNA hybridization detection via the self-signal amplifying procedure of conjugated SPAN-DNA hybrid. Unlike most signal amplifying processes using outer indicators, complex labels or other reagents, this procedure possesses simplicity and convenience.
Assuntos
Compostos de Anilina/química , Sondas de DNA/química , DNA/química , Técnicas Eletroquímicas/métodos , DNA/genética , Hibridização Genética/genéticaRESUMO
Proton exchange membrane (PEM) fuel cell faces the inevitable challenge of the cold start at a sub-freezing temperature. Understanding the underlying degradation mechanisms in the cold start and developing a better starting strategy to achieve a quick startup with no degradation are essential for the wide application of PEM fuel cells. In this study, the comprehensive in situ non-accelerated segmented techniques are developed to analyze the icing processes and obtain the degradation mechanisms under the conditions of freeze-thaw cycle, voltage reversal, and ice formation in different components of PEM fuel cells for different freezing time. A detailed degradation mechanism map in the cold start of PEM fuel cells is proposed to demonstrate how much degradation occurs under different conditions, whether the ice formation is acceptable under the actual operating conditions, and how to suppress the ice formation. Moreover, an ideal starting strategy is developed to achieve the cold start of PEM fuel cells without degradation. This map is highly valuable and useful for researchers to understand the underlying degradation mechanisms and develop the cold start strategy, thereby promoting the commercialization of PEM fuel cells.
RESUMO
The flow field structure of a proton exchange membrane fuel cell (PEMFC) is a determining factor for improving the cell power density. In this study, a universal alternating flow field design for the first time is proposed, which arranges structural units with different flow resistances in an alternating way to significantly improve the gas transfer rate into the electrode, with the advantages of easy machining and low pumping loss. Based on the design, it is proposed and tested large-scale fuel cells with three novel flow fields by combining a parallel channel, baffled channel, serpentine channel, and narrowed channel. The results show that the design can significantly enhance the gas supply efficiency and that the novel baffled flow field improves the PEMFC performance by 23% with low pumping loss. The design employed in the study offers additional options for flow field optimization and contributes to the early achievement of next-generation ultrahigh power density fuel cells.
RESUMO
Proton exchange membrane (PEM) fuel cell has been regarded as a promising approach to the decarbonization and diversification of energy sources. In recent years, durability and cost issues of PEM fuel cells are increasingly significant with the rapid increase of power density. However, the failure to maintain the cell consistency, as one major cause of the above issue, has attracted little attention. Therefore, this study intends to figure out the underlying cause of cell inconsistency and provide solutions to it from the perspective of multi-physics transport coupled with electrochemical reactions. The PEM fuel cells with electrodes under two compression modes are firstly discussed to fully explain the relationship of cell performance and consistency to electrode structure and multi-physics transport. The result indicates that one main cause of cell inconsistency is the intrinsic conflict between the separated transport and cooperated consumption of oxygen and electron throughout the active area. Then, a mixed-pathway electrode design is proposed to reduce the cell inconsistency by enhancing the mixed transport of oxygen and electron in the electrode. It is found that the mixing of pathways in electrodes at under-rib region is more effective than that at the under-channel region, and can achieve an up to 40% reduction of the cell inconsistency with little (3.3%) sacrificed performance. In addition, all the investigations are implemented based on a self-developed digitalization platform that reconstructs the complex physical-chemical system of PEM fuel cells. The fully observable physical information of the digitalized cells provides strong support to the related analysis.
RESUMO
Solid oxide electrochemical cells (SOCs) hold potential as a critical component in the future landscape of renewable energy storage and conversion systems. However, the commercialization of SOCs still requires further breakthroughs in new material development and engineering designs to achieve high performance and durability. In this study, a data-driven powder-to-power framework has been presented, fully digitizing the morphology evolution of heterogeneous electrodes from fabrication to long-term operation. This framework enables accurate performance prediction over the full life cycle. The intrinsic correlation between microstructural parameters and electrode durability is elucidated through parameter analysis. Rational control of the ion-conducting phase volume fraction can effectively suppress Ni coarsening and mitigate the excessive ohmic loss caused by Ni migration. The initial and degraded electrode performances are attributed to the interplay of multiple parameters. A practical optimization strategy to enhance the initial performance and durability of the electrode is proposed through the construction of the surrogate model and the application of the optimization algorithm. The optimal electrode parameters are determined to accommodate various maximum operation time requirements. By implementing the data-driven powder-to-power framework, it is possible to reduce the degradation rate of Ni-based electrodes from 2.132% to 0.703% kh-1 with a required maximum operation time of over 50,000 h.
RESUMO
Next-generation ultrahigh power density proton exchange membrane fuel cells rely not only on high-performance membrane electrode assembly (MEA) but also on an optimal cell structure. To this end, this work comprehensively investigates the cell performance under various structures, and it is revealed that there is unexploited performance improvement in structure design because its positive effect enhancing gas supply is often inhibited by worse proton/electron conduction. Utilizing fine channel/rib or the porous flow field is feasible to eliminate the gas diffusion layer (GDL) and hence increase the power density significantly due to the decrease of cell thickness and gas/electron transfer resistances. The cell structure combining fine channel/rib, GDL elimination and double-cell structure is believed to increase the power density from 4.4 to 6.52 kW L-1 with the existing MEA, showing nearly equal importance with the new MEA development in achieving the target of 9.0 kW L-1 .
RESUMO
The O2 permeation barrier across the nanoscale ionomer films on electrocatalysts contributes to a major performance loss of proton exchange membrane (PEM) fuel cells under low Pt loading. Enhancing O2 transport through the ionomer films is essential for developing low Pt loading catalyst materials in high-performance PEM fuel cells. This study found that adding an ionic liquid (IL) can effectively mitigate the dense ionomer ultrathin sublayer formed on the Pt surface, which severely hinders O2 transport to the catalyst sites. The molecular dynamics simulation results show that adding the IL significantly alters the ionomer ultrathin sublayer structure by inhibiting its tight arrangement of perfluorosulfonic acid chains but scarcely impacts the ultrathin sublayer thickness. Additionally, the IL addition provides a larger free space for O2 dissolution in the ultrathin sublayer. Consequently, due to IL molecules' presence, the O2 density in the ultrathin sublayer on the Pt surface is improved by an order of magnitude, which will benefit the catalytic efficiency, and the O2 permeation flux across the ionomer film is increased by up to 8 times, which will reduce the O2 transport loss of the catalyst layer.
RESUMO
An optimum balance between performance and Pt loading is critically important for the commercialization of proton exchange membrane (PEM) fuel cells. This research aims to investigate the interlink among Pt loading, reactive transport, and performance. An advanced pore-scale model is developed to describe the coupled reactive transport in the catalyst layer (CL) with the reactant gas, protons, and electrons all considered. The CL microstructure is stochastically reconstructed as a computational domain, and the physicochemical phenomena inside CLs are resolved by a multi-component lattice Boltzmann (LB) model. The results show that the electronic potential drop is not sensitive to Pt loading, while the ionic potential drop is much higher. The distributions of local overpotential and the reaction rate are similar with peak values near the membrane, indicating the importance of proton conduction. A high Pt loading could decrease the local transport loss for a shorter path to catalyst sites, but increases the overall transport resistance for a thicker structure. Although a larger electrochemical surface area (ECSA) is provided under a high Pt loading, a low Pt loading (0.1 mg cm-2) is suggested for high current conditions (2 A cm-2) where the transport loss is the main factor restricting the performance.
RESUMO
All-solid-state batteries (ASSBs) have become an important technology because of their high performance and low-risk operation. However, the high interface resistance and low ionic conductivity of ASSBs hinder their application. In this study, a self-developed electrochemical model based on an open-source computational fluid dynamics platform is presented. The effect of contact area reduction at the electrode/solid-state electrolyte interface is investigated. Then, a new conceptual 3D structure is introduced to circumvent the existing barriers. The results demonstrate that the discharge time is shortened by over 20% when the area contact ratio reduces from 1.0 to 0.8 at 1 C-rate, owing to the increased overpotential. By adopting the new 3D pillar design, the energy density of ASSBs can be improved. However, it is only when a 3D current collector is contained in the cathode that the battery energy/power density, capacity, and material utilization can be greatly enhanced without being limited by pillar height issues. Therefore, this work provides important insight into the enhanced performance of 3D structures.
RESUMO
BACKGROUND: The high risks for childhood respiratory diseases are associated with exposure to ambient air pollution. However, there are few studies that have explored the association between air pollution exposure and respiratory diseases among young children (particularly aged 0-2 years) based on the entire population in a megalopolis. METHODS: Daily hospital admission records were obtained from 54 municipal hospitals in Wuhan city, China. We included all children (aged 0-2 years) hospitalized with respiratory diseases between January 2017 and December 2018. Individual air pollution exposure assessment was used in Land Use Regression model and inverse distance weighted. Case-crossover design and conditional logistic regression models were adopted to estimate the hospitalization risk associated with air pollutants. RESULTS: We identified 62,425 hospitalizations due to respiratory diseases, of which 36,295 were pneumonia. Particulate matter with an aerodynamic diameter less than 2.5 µm (PM2.5) and nitrogen dioxide (NO2) were significantly associated with respiratory diseases and pneumonia. ORs of pneumonia were 1.0179 (95% CI 1.0097-1.0260) for PM2.5 and 1.0131 (95% CI 1.0042-1.0220) for NO2 at lag 0-7 days. Subgroup analysis suggested that NO2, Ozone (O3) and sulfur dioxide (SO2) only showed effects on pneumonia hospitalizations on male patients, but PM2.5 had effects on patients of both genders. Except O3, all pollutants were strongly associated with pneumonia in cold season. In addition, children who aged elder months and who were in central urban areas had a higher hospitalization risk. CONCLUSIONS: Air pollution is associated with higher hospitalization risk for respiratory diseases, especially pneumonia, among young children, and the risk is related to gender, month age, season and residential location.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , Pneumonia , Poluentes Atmosféricos/efeitos adversos , Poluentes Atmosféricos/análise , Poluição do Ar/efeitos adversos , Poluição do Ar/análise , Pré-Escolar , China/epidemiologia , Estudos Cross-Over , Feminino , Humanos , Lactente , Recém-Nascido , Masculino , Dióxido de Nitrogênio/análise , Material Particulado/efeitos adversos , Material Particulado/análise , Pneumonia/epidemiologia , Pneumonia/etiologiaRESUMO
A direct electrochemical detection procedure for DNA hybridization by using the electrochemical signal changes of conductive poly(m-aminobenzenesulfonic) acid (PABSA)/TiO(2) nanosheet membranes, which were electropolymerized by using the pulse potentiostatic method, is reported. Due to the unique properties of TiO(2) nanoparticles, m-aminobenzenesulfonic acid monomers tend to be adsorbed around the particles, and the electropolymerization efficiency is greatly improved. The combination of TiO(2) nanoparticles and PABSA resulted in a nanocomposite membrane with unique and novel nanosheet morphology that provides more activation sites and enhances the surface electron-transfer rate. These characteristics were propitious for the magnification of PABSA electrochemical signals and the direct detection of DNA hybridization. Owing to the presence of abundant sulfonic acid groups, PABSA could overcome the drawbacks of polyaniline and be used to detect bioanalytes at physiological pH. DNA probes could be covalently attached to the sulfonic groups through the amines of DNA sequences by using an acyl chloride cross-linking reaction. After immobilization of probe DNA, the electrochemical impedance value increased significantly compared to that of PABSA/TiO(2) nanosheet membranes, and then decreased dramatically after the hybridization reaction of the probe DNA with the complementary DNA sequence compared to that of the probe-immobilized electrode. Electrochemical impedance spectroscopy was adopted for indicator-free DNA biosensing, which had an eminent ability for the recognition between double-base mismatched sequences or non-complementary DNA sequences and complementary DNA sequences. A gene fragment, which is related to one of the screening genes for the transgenically modified plants, the cauliflower mosaic virus 35S gene was satisfactorily detected. This is the first report for the indicator-free impedance DNA hybridization detection by using PABSA/TiO(2) membranes under neutral conditions.
Assuntos
Técnicas Biossensoriais/métodos , Sondas de DNA/química , DNA/química , Impedância Elétrica , Nanopartículas/química , Ácidos Sulfanílicos/química , Compostos de Anilina/química , Condutividade Elétrica , Eletroquímica/métodos , Nanopartículas Metálicas , Nanoestruturas/química , Nanotubos de Carbono/química , Hibridização de Ácido NucleicoRESUMO
The electrochemical behaviors of the interaction of chromotrope 2R (CH2R) with human serum albumin (HSA) are investigated on the hanging mercury drop electrode with linear sweep voltammetry. In the acidic buffer solution (pH 2.5) CH2R has a well-defined voltammetric reductive wave at -0.34 V (SCE). On the addition of HSA into the CH2R solution, the reductive peak current of CH2R decreases with little movement of the peak potential. The voltammetric study shows that the electrochemical parameters of interaction solution do not change and a new electrochemically non-active complex is formed via interaction of CH2R with HSA, which cannot be reduced on the Hg electrode and results in the decrease of the free concentration of CH2R. The decrease of reductive peak current is proportional to HSA concentration and further used for protein detection. The binding ratio and the binding constant are further calculated with the experimental voltammetric data.
Assuntos
Naftalenossulfonatos/metabolismo , Albumina Sérica/metabolismo , Algoritmos , Aminoácidos/química , Animais , Cátions/química , Técnicas Eletroquímicas , Eletrodos , Humanos , Concentração de Íons de Hidrogênio , Indicadores e Reagentes/metabolismo , Limite de Detecção , Microquímica/métodos , Concentração Osmolar , Ligação Proteica , Proteínas/análise , Soro/química , Albumina Sérica/análise , Espectrofotometria/métodosRESUMO
Understanding the O2 permeation phenomenon in the ionomer thin film on platinum (Pt) nanoparticles is vital to improve the electrocatalyst performance of proton exchange membrane fuel cells at a low Pt loading. In this study, the ionomer film structure, O2 density distribution, transport fluxes, and permeation routes are investigated for carbon-supported polyhedral Pt nanoparticles (cube and tetrahedron) in the facet, edge, and corner regions. The molecular dynamic simulation takes into account the molecular interactions among the ionomer, Pt nanoparticles, carbon support, and O2 molecules. The results show that a dense ionomer ultrathin layer with a tight arrangement of perfluorosulfonic acid is present on the Pt facets (namely region A). In the ionomer near the Pt edges and corners (namely region B), the structure is less dense due to the weaker Pt attraction, resulting in a higher O2 density than that in region A. O2 fluxes in the different regions show that approximately 90% of O2 molecules reach the Pt cube and tetrahedron nanoparticles via their upper corner and edge regions. In the vicinity of Pt nanoparticles, O2 permeation routes are inferred to penetrating region B to the Pt upper corners or edges instead of region A to the Pt facets.
RESUMO
Proton exchange membrane fuel cells have been regarded as the most promising candidate for fuel cell vehicles and tools. Their broader adaption, however, has been impeded by cost and lifetime. By integrating a thin layer of tungsten oxide within the anode, which serves as a rapid-response hydrogen reservoir, oxygen scavenger, sensor for power demand, and regulator for hydrogen-disassociation reaction, we herein report proton exchange membrane fuel cells with significantly enhanced power performance for transient operation and low humidified conditions, as well as improved durability against adverse operating conditions. Meanwhile, the enhanced power performance minimizes the use of auxiliary energy-storage systems and reduces costs. Scale fabrication of such devices can be readily achieved based on the current fabrication techniques with negligible extra expense. This work provides proton exchange membrane fuel cells with enhanced power performance, improved durability, prolonged lifetime, and reduced cost for automotive and other applications.
RESUMO
The emergence of all-organic frameworks is of fundamental significance, and designing such structures for anion conduction holds great promise in energy conversion and storage applications. Herein, inspired by the efficient anion transport within organisms, a de novo design of covalent organic frameworks (COFs) toward ultrafast anion transport is demonstrated. A phase-transfer polymerization process is developed to acquire dense and ordered alignment of quaternary ammonium-functionalized side chains along the channels within the frameworks. The resultant self-standing COFs membranes exhibit one of the highest hydroxide conductivities (212 mS cm-1 at 80 °C) among the reported anion exchange membranes. Meanwhile, it is found that shorter, more hydrophilic side chains are favorable for anion conduction. The present work highlights the prospects of all-organic framework materials as the platform building blocks in designing ion exchange membranes and ion sieving membranes.