Observation of an apparent first-order glass transition in ultrafragile Pt-Cu-P bulk metallic glasses.

An experimental study of the configurational thermodynamics for a series of near-eutectic Pt80-x Cu x P20 bulk metallic glass-forming alloys is reported where 14 < x < 27. The undercooled liquid alloys exhibit very high fragility that increases as x decreases, resulting in an increasingly sharp glass transition. With decreasing x, the extrapolated Kauzmann temperature of the liquid, T K , becomes indistinguishable from the conventionally defined glass transition temperature, T g For x < 17, the observed liquid configurational enthalpy vs. T displays a marked discontinuous drop or latent heat at a well-defined freezing temperature, T gm The entropy drop for this first-order liquid/glass transition is approximately two-thirds of the entropy of fusion of the crystallized eutectic alloy. Below T gm , the configurational entropy of the frozen glass continues to fall rapidly, approaching that of the crystallized eutectic solid in the low T limit. The so-called Kauzmann paradox, with negative liquid entropy (vs. the crystalline state), is averted and the liquid configurational entropy appears to comply with the third law of thermodynamics. Despite their ultrafragile character, the liquids at x = 14 and 16 are bulk glass formers, yielding fully glassy rods up to 2- and 3-mm diameter on water quenching in thin-wall silica tubes. The low Cu content alloys are definitive examples of glasses that exhibit first-order melting.

The L-G phase transition in binary Cu-Zr metallic liquids.

The authors recently reported that undercooled liquid Ag and Ag-Cu alloys both exhibit a first order phase transition from the homogeneous liquid (L-phase) to a heterogeneous solid-like G-phase under isothermal evolution. Here, we report a similar L-G transition and heterogenous G-phase in simulations of liquid Cu-Zr bulk glass. The thermodynamic description and kinetic features (viscosity) of the L-G-phase transition in Cu-Zr simulations suggest it corresponds to experimentally reported liquid-liquid phase transitions in Vitreloy 1 (Vit1) and other Cu-Zr-bearing bulk glass forming alloys. The Cu-Zr G-phase has icosahedrally ordered cores versus fcc/hcp core structures in Ag and Ag-Cu with a notably smaller heterogeneity length scale Λ. We propose the L-G transition is a phenomenon in metallic liquids associated with the emergence of elastic rigidity. The heterogeneous core-shell nano-composite structure likely results from accommodating strain mismatch of stiff core regions by more compliant intervening liquid-like medium.

Transcriptional profiling and metabolomic analysis of Staphylococcus aureus grown on autoclaved chicken breast.

Although Staphylococcus aureus is a major cause of food poisoning, little is known about its response to growth on food. Utilizing a transcriptional profiling and metabolomics approach, we compared S. aureus grown on autoclaved chicken breast (ACB) to Luria broth agar. ACB cultures demonstrated increased expression of genes associated with protein synthesis, cofactors, secondary metabolites, nitrogen and nucleotide metabolism, amino acid transport, and reduced expression of general stress, lipid metabolism, and virulence genes. The ACB culture also displayed characteristics of catabolite de-repression and anaerobic growth, and increased expression of arginine biosynthesis genes (argFGH) and an arginine/ornithine antiporter gene (arcD). S. aureus synthesizes arginine from proline and the ACB culture exhibited increased expression of proline transport genes (opuBA, opuBB and putP) and increased proline accumulation. Amino acid and sugar content in the ACB grown culture increased, and this was attributed to the consumption of ACB, transport of amino acids, and gluconeogenesis. Genes involved with biotin biosynthesis and uptake were upregulated and biotin is required for amino acid catabolism. Genes encoding urease and urease activity were upregulated in ACB cultures, while urea levels were reduced. This research provides fundamental information on the response of S. aureus growing on chicken meat that could find application in future attempts to reduce the growth of S. aureus in food.

Origin of embrittlement in metallic glasses.

Owing to their glassy nature, metallic glasses demonstrate a toughness that is extremely sensitive to the frozen-in configurational state. This sensitivity gives rise to "annealing embrittlement," which is often severe and in many respects limits the technological advancement of these materials. Here, equilibrium configurations (i.e., "inherent states") of a metallic glass are established around the glass transition, and the configurational properties along with the plane-strain fracture toughness are evaluated to associate the intrinsic glass toughness with the inherent state properties and identify the fundamental origin of embrittlement. The established correlations reveal a one-to-one correspondence between toughness and shear modulus continuous over a broad range of inherent states, suggesting that annealing embrittlement is controlled almost solely by an increasing resistance to shear flow. This annealing embrittlement sensitivity is shown to vary substantially between metallic glass compositions, and appears to correlate well with the fragility of the metallic glass.

How the toughness in metallic glasses depends on topological and chemical heterogeneity.

To gain insight into the large toughness variability observed between metallic glasses (MGs), we examine the origin of fracture toughness through bending experiments and molecular dynamics (MD) simulations for two binary MGs: Pd82Si18 and Cu46Zr54 The bending experiments show that Pd82Si18 is considerably tougher than Cu46Zr54, and the higher toughness of Pd82Si18 is attributed to an ability to deform plastically in the absence of crack nucleation through cavitation. The MD simulations study the initial stages of cavitation in both materials and extract the critical factors controlling cavitation. We find that for the tougher Pd82Si18, cavitation is governed by chemical inhomogeneity in addition to topological structures. In contrast, no such chemical correlations are observed in the more brittle Cu46Zr54, where topological low coordination number polyhedra are still observed around the critical cavity. As such, chemical inhomogeneity leads to more difficult cavitation initiation in Pd82Si18 than in Cu46Zr54, leading to a higher toughness. The absence of chemical separation during cavitation initiation in Cu46Zr54 decreases the energy barrier for a cavitation event, leading to lower toughness.

Compositional landscape for glass formation in metal alloys.

A high-resolution compositional map of glass-forming ability (GFA) in the Ni-Cr-Nb-P-B system is experimentally determined along various compositional planes. GFA is shown to be a piecewise continuous function formed by intersecting compositional subsurfaces, each associated with a nucleation pathway for a specific crystalline phase. Within each subsurface, GFA varies exponentially with composition, wheres exponential cusps in GFA are observed when crossing from one crystallization pathway to another. The overall GFA is shown to peak at multiple exponential hypercusps that are interconnected by ridges. At these compositions, quenching from the high-temperature melt yields glassy rods with diameters exceeding 1 cm, whereas for compositions far from these cusps the critical rod diameter drops precipitously and levels off to 1 to 2 mm. The compositional landscape of GFA is shown to arise primarily from an interplay between the thermodynamics and kinetics of crystal nucleation, or more precisely, from a competition between driving force for crystallization and liquid fragility.

Enhanced fatigue endurance of metallic glasses through a staircase-like fracture mechanism.

Bulk-metallic glasses (BMGs) are now candidate materials for structural applications due to their exceptional strength and toughness. However, their fatigue resistance can be poor and inconsistent, severely limiting their potential as reliable structural materials. As fatigue limits are invariably governed by the local arrest of microscopically small cracks at microstructural features, the lack of microstructure in monolithic glasses, often coupled with other factors, such as the ease of crack formation in shear bands or a high susceptibility to corrosion, can lead to low fatigue limits (some ~1/20 of their tensile strengths) and highly variable fatigue lives. BMG-matrix composites can provide a solution here as their duplex microstructures can arrest shear bands at a second phase to prevent cracks from exceeding critical size; under these conditions, fatigue limits become comparable with those of crystalline alloys. Here, we report on a Pd-based glass that similarly has high fatigue resistance but without a second phase. This monolithic glass displays high intrinsic toughness from extensive shear-band proliferation with cavitation and cracking effectively obstructed. We find that this property can further promote fatigue resistance through extrinsic crack-tip shielding, a mechanism well known in crystalline metals but not previously reported in BMGs, whereby cyclically loaded cracks propagate in a highly "zig-zag" manner, creating a rough "staircase-like" profile. The resulting crack-surface contact (roughness-induced crack closure) elevates fatigue properties to those comparable to crystalline alloys, and the accompanying plasticity helps to reduce flaw sensitivity in the glass, thereby promoting structural reliability.

Prolongation of Subarachnoid Block With Concomitant Use of Intravenous Dexmedetomidine: An Evidence-based Review.

A failed subarachnoid block due to prolonged surgical duration continues to be a challenging problem for anesthesia providers. This evidence-based review updates a 2013 systematic review describing the use of intravenous dexmedetomidine as an extrathecal spinal adjunct capable of extending the duration of a subarachnoid block. Eight randomized controlled trials published after the 2013 systematic review met the inclusion criteria. The evidence continues to support the use of intravenous dexmedetomidine as an effective method for prolonging the duration of motor and sensory blockade and postoperative analgesia in a subarachnoid block, with minimal side effects. This updated review reported a more consistent use of assessment tools measuring motor and sensory recovery, expanded the volume of evidence related to postoperative analgesia, and further validated the safe and efficacious use of intravenous dexmedetomidine in extending the duration of a subarachnoid block. Future studies are needed to evaluate the rescue benefit of intravenous dexmedetomidine in failed subarachnoid blocks converted to general anesthesia resulting from prolonged surgical times.

Designing metallic glass matrix composites with high toughness and tensile ductility.

The selection and design of modern high-performance structural engineering materials is driven by optimizing combinations of mechanical properties such as strength, ductility, toughness, elasticity and requirements for predictable and graceful (non-catastrophic) failure in service. Highly processable bulk metallic glasses (BMGs) are a new class of engineering materials and have attracted significant technological interest. Although many BMGs exhibit high strength and show substantial fracture toughness, they lack ductility and fail in an apparently brittle manner in unconstrained loading geometries. For instance, some BMGs exhibit significant plastic deformation in compression or bending tests, but all exhibit negligible plasticity (<0.5% strain) in uniaxial tension. To overcome brittle failure in tension, BMG-matrix composites have been introduced. The inhomogeneous microstructure with isolated dendrites in a BMG matrix stabilizes the glass against the catastrophic failure associated with unlimited extension of a shear band and results in enhanced global plasticity and more graceful failure. Tensile strengths of approximately 1 GPa, tensile ductility of approximately 2-3 per cent, and an enhanced mode I fracture toughness of K(1C) approximately 40 MPa m(1/2) were reported. Building on this approach, we have developed 'designed composites' by matching fundamental mechanical and microstructural length scales. Here, we report titanium-zirconium-based BMG composites with room-temperature tensile ductility exceeding 10 per cent, yield strengths of 1.2-1.5 GPa, K(1C) up to approximately 170 MPa m(1/2), and fracture energies for crack propagation as high as G(1C) approximately 340 kJ m(-2). The K(1C) and G(1C) values equal or surpass those achievable in the toughest titanium or steel alloys, placing BMG composites among the toughest known materials.

Cystic echinococcosis in cattle and sheep caused by Echinococcus granulosus sensu stricto genotypes G1 and G3 in the USA.

BACKGROUND: Endemic domestic dog-ruminant cycles and human cystic echinococcosis caused by Echinococcus granulosus have been sporadically reported in the United States. However, there is a paucity of molecular data describing the genotypes and haplotypes of this important cestode in domestic ruminant hosts. METHODS: Ninety-four cysts from the lungs and/or livers of slaughtered beef cattle (76 samples), dairy cows (five samples) and sheep (13 samples) were collected from abattoirs in four states of the USA. Samples were genotyped at two mitochondrial loci, cox1 and nad5. Sequences were used to determine species, genotypes and haplotypes using median joining networks and Bayesian phylogenetic analyses. Cyst fertility was assessed in hematoxylin and eosin-stained sections. Additionally, previously reported autochthonous E. granulosus infections in the USA in various hosts were mapped. RESULTS: Based on cox1 sequences obtained from 94 cysts, 89 (94.7%) were identified as E. granulosus G1/G3, while five (5.3%) were Taenia hydatigena. Taenia hydatigena were only isolated from sheep. Based on nad5 sequences obtained from 89 hydatid cysts, 96.6% and 3.4% belonged to E. granulosus sensu stricto genotypes G1 and G3 respectively. Two haplotypes were found among E. granulosus cox1 sequences, neither of which was geographically unique. Six haplotypes were found among nad5 sequences in genotype G1, of which five were novel, while one haplotype was found in genotype G3. In the concatenated cox1-nad5 dataset, seven haplotypes were identified, of which six were geographically unique. All cysts from cattle were non-fertile. Four cysts from sheep were fertile. CONCLUSIONS: All genotyped samples belonged to E. granulosus s.s. This is the first study to our knowledge to confirm the presence of genotypes G1 and G3 in domestic cattle and sheep intermediate hosts in the USA and provide data for future diagnostic and epidemiological studies. Sequences have been deposited in GenBank (cox1 sequences: OR398494-OR398496, nad5 sequences: OR400695-OR400702).

A Genetic Locus in Elizabethkingia anophelis Associated with Elevated Vancomycin Resistance and Multiple Antibiotic Reduced Susceptibility.

The Gram-negative Elizabethkingia express multiple antibiotic resistance and cause severe opportunistic infections. Vancomycin is commonly used to treat Gram-positive infections and has also been used to treat Elizabethkingia infections, even though Gram-negative organisms possess a vancomycin permeability barrier. Elizabethkingia anophelis appeared relatively vancomycin-susceptible and challenge with this drug led to morphological changes indicating cell lysis. In stark contrast, vancomycin growth challenge revealed that E. anophelis populations refractory to vancomycin emerged. In addition, E. anophelis vancomycin-selected mutants arose at high frequencies and demonstrated elevated vancomycin resistance and reduced susceptibility to other antimicrobials. All mutants possessed a SNP in a gene (vsr1 = vancomycin-susceptibility regulator 1) encoding a PadR family transcriptional regulator located in the putative operon vsr1-ORF551, which is conserved in other Elizabethkingia spp as well. This is the first report linking a padR homologue (vsr1) to antimicrobial resistance in a Gram-negative organism. We provide evidence to support that vsr1 acts as a negative regulator of vsr1-ORF551 and that vsr1-ORF551 upregulation is observed in vancomycin-selected mutants. Vancomycin-selected mutants also demonstrated reduced cell length indicating that cell wall synthesis is affected. ORF551 is a membrane-spanning protein with a small phage shock protein conserved domain. We hypothesize that since vancomycin-resistance is a function of membrane permeability in Gram-negative organisms, it is likely that the antimicrobial resistance mechanism in the vancomycin-selected mutants involves altered drug permeability.

Choclo virus (CHOV) recovered from deep metatranscriptomics of archived frozen tissues in natural history biorepositories.

BACKGROUND: Hantaviruses are negative-stranded RNA viruses that can sometimes cause severe disease in humans; however, they are maintained in mammalian host populations without causing harm. In Panama, sigmodontine rodents serve as hosts to transmissible hantaviruses. Due to natural and anthropogenic forces, these rodent populations are having increased contact with humans. METHODS: We extracted RNA and performed Illumina deep metatranscriptomic sequencing on Orthohantavirus seropositive museum tissues from rodents. We acquired sequence reads mapping to Choclo virus (CHOV, Orthohantavirus chocloense) from heart and kidney tissue of a two-decade old frozen museum sample from a Costa Rican pygmy rice rat (Oligoryzomys costaricensis) collected in Panama. Reads mapped to the CHOV reference were assembled and then validated by visualization of the mapped reads against the assembly. RESULTS: We recovered a 91% complete consensus sequence from a reference-guided assembly to CHOV with an average of 16X coverage. The S and M segments used in our phylogenetic analyses were nearly complete (98% and 99%, respectively). There were 1,199 ambiguous base calls of which 93% were present in the L segment. Our assembled genome varied 1.1% from the CHOV reference sequence resulting in eight nonsynonymous mutations. Further analysis of all publicly available partial S segment sequences support a clear relationship between CHOV clinical cases and O. costaricensis acquired strains. CONCLUSIONS: Viruses occurring at extremely low abundances can be recovered from deep metatranscriptomics of archival tissues housed in research natural history museum biorepositories. Our efforts resulted in the second CHOV genome publicly available. This genomic data is important for future surveillance and diagnostic tools as well as understanding the evolution and pathogenicity of CHOV.

Antimicrobial Drug-Drug Interactions in the Treatment of Infectious Keratitis.

PURPOSE: Infectious keratitis is a serious disease requiring immediate, intensive, and broad-spectrum empiric treatment to prevent vision loss. Given the diversity of organisms that can cause serious corneal disease, current guidelines recommend treatment with several antimicrobial agents simultaneously to provide adequate coverage while awaiting results of microbiology cultures. However, it is currently unknown how the use of multiple ophthalmic antimicrobial agents in combination may affect the efficacy of individual drugs. METHODS: Using a panel of 9 ophthalmic antibiotics, 3 antifungal agents, and 2 antiacanthamoeba therapeutics, fractional inhibitory concentration testing in the standard checkerboard format was used to study 36 antibiotic-antibiotic combinations, 27 antibiotic-antifungal combinations, and 18 antibiotic-antiacanthamoeba combinations against both Staphylococcus aureus and Pseudomonas aeruginosa for synergistic, additive, neutral, or antagonistic drug-drug interactions. RESULTS: We demonstrate that while most combinations resulted in no change in antimicrobial efficacy of individual components, the combination of erythromycin + polyhexamethylene biguanide was found to be antagonistic toward P. aeruginosa . Conversely, 18 combinations toward S. aureus and 15 combinations toward P. aeruginosa resulted in additive or synergistic activity, including 4 with improved activity toward both species. CONCLUSIONS: Understanding how drug-drug interactions may affect drug efficacy is critical to selecting the appropriate combination therapy and improving clinical outcomes of this blinding disease.

Staphylococcal Enterotoxins Promote Virulence in Bacterial Keratitis.

Purpose: Staphylococcus aureus is an important cause of corneal infections (keratitis). To better understand the virulence mechanisms mediating keratitis, a recent comparative genomics study revealed that a set of secreted enterotoxins were found with higher prevalence among ocular versus non-ocular S. aureus clinical infection isolates, suggesting a key role for these toxins in keratitis. Although well known to cause toxic shock syndrome and S. aureus food poisoning, enterotoxins have not yet been shown to mediate virulence in keratitis. Methods: A set of clinical isolate test strains, including a keratitis isolate that encodes five enterotoxins (sed, sej, sek, seq, ser), its corresponding enterotoxin deletion mutant and complementation strain, a keratitis isolate devoid of enterotoxins, and the non-ocular S. aureus strain USA300 along with its corresponding enterotoxin deletion and complementation strains, were evaluated for cellular adhesion, invasion and cytotoxicity in a primary corneal epithelial model as well as with microscopy. Additionally, strains were evaluated in an in vivo model of keratitis to quantify enterotoxin gene expression and measure disease severity. Results: We demonstrate that, although enterotoxins do not impact bacterial adhesion or invasion, they do elicit direct cytotoxicity in vitro toward corneal epithelial cells. In an in vivo model, sed, sej, sek, seq, ser were found to have variable gene expression across 72 hours of infection and test strains encoding enterotoxins resulted in increased bacterial burden as well as a reduced host cytokine response. Conclusions: Our results support a novel role for staphylococcal enterotoxins in promoting virulence in S. aureus keratitis.

Genetic Determinants of Acinetobacter baumannii Serum-Associated Adaptive Efflux-Mediated Antibiotic Resistance.

Acinetobacter baumannii is a nosocomial pathogen of serious healthcare concern that is becoming increasingly difficult to treat due to antibiotic treatment failure. Recent studies have revealed that clinically defined antibiotic-susceptible strains upregulate the expression of a repertoire of putative drug efflux pumps during their growth under biologically relevant conditions, e.g., in human serum, resulting in efflux-associated resistance to physiologically achievable antibiotic levels within a patient. This phenomenon, termed Adaptive Efflux Mediated Resistance (AEMR), has been hypothesized to account for one mechanism by which antibiotic-susceptible A. baumannii fails to respond to antibiotic treatment. In the current study, we sought to identify genetic determinants that contribute to A. baumannii serum-associated AEMR by screening a transposon mutant library for members that display a loss of the AEMR phenotype. Results revealed that mutation of a putative pirin-like protein, YhaK, results in a loss of AEMR, a phenotype that could be complemented by a wild-type copy of the yhaK gene and was verified in a second strain background. Ethidium bromide efflux assays confirmed that the loss of AEMR phenotype due to pirin-like protein mutation correlated with reduced overarching efflux capacity. Further, flow cytometry and confocal microscopy measures of a fluorophore 7-(dimethylamino)-coumarin-4-acetic acid (DMACA)-tagged levofloxacin isomer, ofloxacin, further verified that YhaK mutation reduces AEMR-mediated antibiotic efflux. RNA-sequencing studies revealed that YhaK may be required for the expression of multiple efflux-associated systems, including MATE and ABC families of efflux pumps. Collectively, the data indicate that the A. baumannii YhaK pirin-like protein plays a role in modulating the organism's adaptive efflux-mediated resistance phenotype.

A damage-tolerant glass.

Owing to a lack of microstructure, glassy materials are inherently strong but brittle, and often demonstrate extreme sensitivity to flaws. Accordingly, their macroscopic failure is often not initiated by plastic yielding, and almost always terminated by brittle fracture. Unlike conventional brittle glasses, metallic glasses are generally capable of limited plastic yielding by shear-band sliding in the presence of a flaw, and thus exhibit toughness-strength relationships that lie between those of brittle ceramics and marginally tough metals. Here, a bulk glassy palladium alloy is introduced, demonstrating an unusual capacity for shielding an opening crack accommodated by an extensive shear-band sliding process, which promotes a fracture toughness comparable to those of the toughest materials known. This result demonstrates that the combination of toughness and strength (that is, damage tolerance) accessible to amorphous materials extends beyond the benchmark ranges established by the toughest and strongest materials known, thereby pushing the envelope of damage tolerance accessible to a structural metal.

Solution to the problem of the poor cyclic fatigue resistance of bulk metallic glasses.

The recent development of metallic glass-matrix composites represents a particular milestone in engineering materials for structural applications owing to their remarkable combination of strength and toughness. However, metallic glasses are highly susceptible to cyclic fatigue damage, and previous attempts to solve this problem have been largely disappointing. Here, we propose and demonstrate a microstructural design strategy to overcome this limitation by matching the microstructural length scales (of the second phase) to mechanical crack-length scales. Specifically, semisolid processing is used to optimize the volume fraction, morphology, and size of second-phase dendrites to confine any initial deformation (shear banding) to the glassy regions separating dendrite arms having length scales of approximately 2 mum, i.e., to less than the critical crack size for failure. Confinement of the damage to such interdendritic regions results in enhancement of fatigue lifetimes and increases the fatigue limit by an order of magnitude, making these "designed" composites as resistant to fatigue damage as high-strength steels and aluminum alloys. These design strategies can be universally applied to any other metallic glass systems.

Assessment of Keratitis Severity Using Quantitative Image Analysis in an In Vivo Murine Model of Staphylococcus aureus Bacterial Keratitis.

Purpose: Bacterial keratitis (BK) severity in murine models has traditionally been measured by subjective clinical grading or quantification of ocular bacterial burden. This investigation explores an objective and repeatable quantification of slit lamp photography (SLP) images to measure BK severity. Methods: BALB/c strain mice underwent three parallel scratches of the right cornea with subsequent inoculation of 107Staphylococcus aureus cells. SLP imaging and clinical severity grading were performed at 48 hours post-infection. Stromal infiltrate (SI) area on SLP images were quantified. Bacterial burden was determined after enucleation and homogenization. Spearman rank correlations (rs) were used to estimate associations between SI area, clinical severity grades, and bacterial burden. Results: BALB/c strain mice (n = 14) were evaluated with an average SI area of 0.92 mm2 (standard deviation, SD = 0.65) and average bacterial burden of 3.16 × 105 colony forming units per milliliter (CFU/mL) (SD = 8.3 × 105). Clinical severity grade positively correlated with SI area (rs = 0.59, p = 0.0276) and bacterial burden (rs = 0.66, p = 0.0106). There was a trend towards positive association between SI area and bacterial burden (rs = 0.51, p = 0.0543). Conclusions: SLP annotation of SI area is correlated with clinical severity and may provide an objective, quantitative, and repeatable assessment of BK disease severity. Translational Relevance: SLP annotation of SI area is a novel quantitative method to evaluate bacterial keratitis severity longitudinally in mouse models which may be a powerful tool to better understand BK pathogenesis and response to treatments.

A comparison of Mini-FLOTAC and McMaster techniques, overdispersion and prevalence of parasites in naturally infected North American bison (Bison bison) in the USA.

Several quantitative diagnostic techniques are available to estimate gastrointestinal parasite counts in the feces of ruminants. Comparing egg and oocyst magnitudes in naturally infected samples has been a recommended approach to rank fecal techniques. In this study, we compared the Mini-FLOTAC (sensitivity of 5 eggs per gram (EPG)/oocysts per gram (OPG)) and different averaged replicates of the modified McMaster techniques (sensitivity of 33.33 EPG/OPG) in 387 fecal samples from 10 herds of naturally infected North American bison in the Central Great Plains region of the USA. Both techniques were performed with fecal slurries homogenized in a fill-FLOTAC device. In the study population, prevalence of strongyle eggs, Eimeria spp. oocysts, Moniezia spp. eggs and Trichuris spp. eggs was 81.4%, 73.9%, 7.5%, and 3.1%, respectively. Counts of strongyle eggs and Eimeria spp. oocysts obtained from 1 to 3 averaged technical replicates of the modified McMaster technique were compared to a single replicate of the Mini-FLOTAC. Correlation between the two techniques increased with an increase in the number of averaged technical replicates of the modified McMaster technique used to calculate EGP/OPG. The correlation for Moniezia spp. EPG when averaged triplicates of the modified McMaster technique were compared to a single replicate of the Mini-FLOTAC count was high; however, the correlation for Trichuris spp. eggs was low. Additionally, we used averaged counts from both techniques to show the overdispersion of parasites in bison herds.